Sole Fitness LCR Fitness Bike Owner's Manual
OWNER’S MANUAL
LCR Fitness Bike
Please carefully read this entire manual
before operating your new fitness bike.
Before returning your Sole product to any retailer, or if you require any
assistance with assembly or technical support please call us rst for
assistance at 866-697-6531. Thank you for your Sole purchase.
TABLE OF CONTENTS
Product Registration
Important Safety Instructions
Important Operation Instructions
Transport Instructions
LCR Assembly Instructions
Fitness Bike Features
Operation of Your New Fitness Bike
Programmable Features
Using Heart Rate Monitor
1
2
3
3
6
10
11
14
21
General Maintenance
Manufacturer’s Limited Warranty
ATTENTION
THIS FITNESS BIKE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR
THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.
Before returning your Sole product to any retailer, or if you require any
assistance with assembly or technical support please call us rst for
23
24
assistance at 866-697-6531. Thank you for your Sole purchase.
CONGRATULATIONS ON YOUR NEW FITNESS BIKE AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality tness bike from SOLE. Your new tness bike has been
manufactured by one of the leading tness manufacturers in the world and is backed by one of the
most comprehensive warranties available. SOLE will do all we can to make your ownership
experience as pleasant as possible for many years to come.
If you have any questions about your new product or questions about the warranty contact SOLE
Fitness at 1-866-780-SOLE (7653). If you have a technical problem with your new tness bike
contact SOLE technical service at 866-MYSOLE1 (697-6531).
Please take a moment at this time to record below the name of the dealer, their telephone number,
and the date of purchase for easy contact in the future. We appreciate your condence in SOLE and
we will always remember that you are the reason that we are in business. Please complete and mail
your registration card today and enjoy your new tness bike.
Yours in Health,
SOLE Fitness
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this tness product
in the space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to SOLE.
You can also go to www.soletreadmills.com under the support tab to register online.
LCR_20130523
LCR FITNESS BIKE1
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
Do not operate tness bike on deeply padded, plush or shag carpet. Damage to both carpet
and tness bike may result.
Keep children away from the tness bike. There are obvious pinch points and other caution
areas that can cause harm.
Keep hands away from all moving parts.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
Do not attempt to use your tness bike for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Various factors, including the user’s
movement, may aect the accuracy of heart rate readings. The pulse sensors are intended
only as exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your tness bike. Quality athletic shoes are recommended to avoid leg fatigue or injury.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
2LCR FITNESS BIKE
IMPORTANT OPERATION INSTRUCTIONS
NEVER expose this tness bike to rain or moisture. This product is NOT designed for
use outdoors, near a pool or spa, or in any other high humidity environment. The operating temperature specication is 40 to 120 degrees Fahrenheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
NEVER operate this tness bike without reading and completely understanding the results
of any operational change you request from the computer.
Understand that changes in resistance do not occur immediately. Set your desired resistance
on the computer console and release the adjustment key. The computer will obey the
command gradually.
Use caution while participating in other activities while pedaling on your tness bike; such
as watching television, reading, etc. These distractions may result in serious injury.
Do not use excessive pressure on console control keys. They are precision set to function
properly with little nger pressure. If you feel the buttons are not functioning properly with
normal pressure contact your SOLE dealer.
TRANSPORT INSTRUCTIONS
The tness bike is equippped with two transport wheels which are engaged when
the rear of the tness bike is lifted.
LCR FITNESS BIKE3
1
LCR ASSEMBLY PACK CHECKLIST
HARDWARE STEP 1
2
#65. 3/8” x 2-1/4”
Hex Head Bolt (4 pcs)
#84. 3/8” x 25 x 2T
Flat Washer (4 pcs)
HARDWARE STEP 2
#176. 3/8” x 3/4”
Hex Head Bolt (6 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer (6 pcs)
#136. M5 x 15mm
Phillips Head Screw (4 pcs)
#71. 3/8” x 1-3/4”
Hex Head Bolt (2 pcs)
#89. 3/8” x 7T
Nyloc Nut (4 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer (4 pcs)
#175. 3/8” x 2-3/4”
Hex Head Bolt (2 pcs)
4LCR FITNESS BIKE
3
HARDWARE STEP 3
4
#68. 5/16” x 5/8”
Hex Head Bolt (8 pcs)
#82. 5/16” x 1.5T
Split Washer (2 pcs)
HARDWARE STEP 4
#98. M6 x 15mm
Phillips Head Screw (4 pcs)
#76. 5/16” x 18 x 1.5T
Flat Washer (6 pcs)
#83. 5/16” x 19 x 1.5T
Curved Washer (2 pcs)
#99. M5 x 12mm
Phillips Head Screw (8 pcs)
#105. Ø4 x 16mm
Sheet Metal Screw (4 pcs)
LCR FITNESS BIKE5
ASSEMBLY TOOLS
15
#114. Phillips Head Screwdriver
#112. 12/14mm Wrench
#132. 14/15mm Wrench
LCR ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along
the dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
3. Locate the hardware package. Remove the tools rst. Remove the hardware
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference.
6LCR FITNESS BIKE
1
REAR STABILIZER & SEAT BACK
1. Install the Rear Stabilizer (7) onto the Main Frame (1) with four Hex Head
Bolts (65) and four Flat Washers (84) using the 12/14mm Wrench (112).
2. Install the Seat Back Cover (128) onto Seat Back Bracket (5) with four Phillips
Head Screws (136) using the Phillips Head Screw Driver(114).
3. Install Seat Back Bracket (5) onto the Seat Carriage (4) with six Hex Head Bolts
(176) and six Flat Washers (77) using the 12/14mm Wrench (112).
HARDWARE STEP 1
#65. 3/8” x 2-1/4”
Hex Head Bolt (4 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer (6 pcs)
#84. 3/8” x 25 x 2T
Flat Washer (4 pcs)
#176. 3/8” x 3/4”
Hex Head Bolt (6 pcs)
#136. M5 x 15mm
Phillips Head Screw
(4 pcs)
2
SEAT HANDLE BAR
1. Install the Seat Handle Bar (6) onto the Seat Carriage (4) with four Hex Head
Bolts (2 - 71 & 2 - 175), four Flat Washers (77) and four Nyloc Nuts (89) using
the 12/14mm Wrench (112) and 14/15mm Wrench (132).
2. Plug the two Hand pulse Cables (21 & 27) into the two rear receiver ports (26)
located on the left side rear cover, just under the seat.
3. Be sure the connectors are plugged into the correct ports. Each connector has
a tag that indicates either L for Left, which plugs into port (42) in the drawing,
and R for right, plugs into port (26).
HARDWARE STEP 2
#71. 3/8” x 1-3/4”
Hex Head Bolt (2 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer (4 pcs)
#89. 3/8” x 7T
Nyloc Nut (4 pcs)
#175. 3/8” x 2-3/4”
Hex Head Bolt (2 pcs)
LCR FITNESS BIKE7
Loading...