Sole Fitness F60 16810360 Owner's Manual
OWNER’S MANUAL
Model:16810360
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW TREADMILL!
TABLE OF CONTENTS
Product Registration.............………………..……………………………………1
Important Safety Instructions……………..………………………………………2
Important Electrical Information………..………………………... ………………3
Important Operation Instructions...……………………………………………….4
Important Safety Instructions...........................................................................5
Assembly Pack Checklist……………………….………… .… …… …… …… ……6
Assembly Instructions………………………………………… …… ………… ……8
Folding Instructions………………………………………… …… …… …… …… … 11
Transport Instructions………………………………………………………………11
Operation of Your Treadmill…………………………………………………..……12
Programmable Features……………………………………………………………16
General Maintenance…………………………………………………………..…...23
Service Checklist-Diagnosis Guide…………………………………………..……26
Exploded View Diagram…………………………………………... ……………….28
Parts List….………………………………..……………………..…………………..29
Manufacturer’s Limited Warranty………………………………………………...…33
Dyaco Canada Inc.2013
-1-
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality treadmill from Dyaco Canada Inc. Your new treadmill
has been manufactured by one of the leading fitness manufacturers in the worod and is backed
by one of the most comprehensive warranties available. Dyaco Canada Inc. will do all we can to
make your ownership experience as pleasant as possible for many years to come.
If you have any questions about your new Sole product or questions about the warranty contact
Dyaco Canada Inc. at 1-888-707-1880.
If you purchased this fitness product from Sears, they will be your contact for all service needs.
To contact Sears for any service issues call 1-800-4-MY-HOME(1-800-469-4663).
Please take a moment at this time to record below the name of the dealer, their telephone
number and the date of purchase for easy contact in the future.We appreciate your confidence in
SOLE and we will always remember that you are the reason that we are in business.Please
complete and mail your registration card today and enjoy your new treadmill.
Yours in Health,
Dyaco Canada Inc.
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness
product in the space provided below.
Serial Number
Dyaco Canada Inc.2013
-2-
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your treadmill from the
electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons,
install the treadmill on a flat level surface with access to a 110-volt, 15-amp grounded outlet
with only the treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH
ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED
PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.
A serious shock or fire hazard may result along with computer malfunctions. See
Grounding Instructions, page 5.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.
Keep children away from the treadmill. There are obvious pinch points and other caution
areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not
working properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, then remove the plug from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Their purpose is to provide you with
an approximate measurement in relation to your target heart rate. Use of a chest
transmitter strap is a much more accurate method of heart rate analysis. Various factors,
including the user’s movement, may affect the accuracy of heart rate readings. The
pulse sensors are intended only as exercise aids in determining heart rate trends in
general.
Use handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for
use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Dyaco Canada Inc.2013
-3-
IMPORTANT ELECTRICAL INFORMATION
W ARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with
any appliance with a large motor, the GFCI will trip often. Route the power cord away from
any moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten
percent (10%) or more, the performance of your treadmill may be affected. Such conditions
are not covered under your warranty. If you suspect the voltage is low, contact your local
power company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The maximum
operating temperature specification is 40 degrees c, and humidity is 95%
non-condensing (no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush
currents that can occur when a treadmill is first turned on or even during use. If your
treadmill is tripping the house circuit break er (even though it is the proper current rating)
but the circuit breaker on the treadmill itself does not trip, you will need to replace the
home breaker with a high inrush type. This is not a warranty defect.This is a condition
we as a manufacture have no ability to control. This part is available through most
electrical supply stores. Examples: Grainger part # 1D237, or available online at
www.squared.com part # QO120HM.
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdo wn,
grounding provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check w ith a qualified electrician or serviceman if
you are in doubt as to whether the product is properly grounded. Do not modify the
plug provided with the product if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug
illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to
connect this plug to a 2-pole receptacl e as shown below if a properly gro unded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet, (shown below) can be
installed by a qualified electrician. The
green colored rigid ear-lug, or the like,
extending from the adapter, must be
connected to a permanent ground such
as a properly grounded outlet box cover.
Whenever the adapter is used, it must
be held in place by a metal screw.
Dyaco Canada Inc.2013
-4-
IMPORTANT OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the results
of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
work level on the computer console and release the adjustment key. The computer will
obey the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your
household power supply that could damage treadmill components. Unplug the treadmill
during an electrical storm as a precaution.
Use caution while participat ing in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance
which may result in serious injury.
Do not use excessive pressur e on console control keys. They are precision set to function
properly with little finger pressure.
SAFETY TETHER CORD
A safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the
tread-belt. Pulling this safety tether cord will stop tread-belt movement. To Use:
1. Place the magnet into position on the round metal portion of the console control head.
Your treadmill will not start and operate without this. Removing the magnet also
secures the treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
The magnet has strong enough power to minimize accidental, unexpected stopping.
The clip should be attached securely to make certain it does not come off. Be familiar
with its function and limitations. The treadmill will stop, depending on speed, with a
one to two step coast anytime the magnet is pulled off the console. Use the Stop /
Pause switch in normal operation.
Dyaco Canada Inc.2013
-5-
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill
could spring open unexpectedly and cause injury if someone is standing near the treadmill
when the strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using
the treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This
could cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap
(that you need to grab to remove it) happens to be under the treadmill deck, reach under
the deck to grab it, but do not tilt the treadmill up to gain access to the strap end.
PREVENTATIVE MAINTENANCE CHART
Vacuum Under
Motor
Cover&Check
Wiring(Every
Other Month)
Clean&Inspect
Deck for
Lubrication(Every
Other Month)
Lubricate
Deck(Every 90
hours or sooner
if dry)
Inspect Belt
Tracking(Monthly)Adjust
if necessary
Date
Dyaco Canada Inc.2013
-6-
F60 ASSEMBLY PACK CHECKLIST
HARDWARE STEP 2
HARDWARE STEP 3
HARDWARE STEP 5
HARDWARE STEP 6
2
#76. Ø5/16" × Ø18 × 1.5T
Flat Washer (8 pcs)
3
#95. M5 × 15m/m
Phillips Head Screw (6 pcs)
5
#93. Ø10
Split Washer (4 pcs)
6
#96. 5/16" × 3/4"
Button Head Socket Bolt (4pcs)
#94. 3/8" × 1-1/2"
Button Head Socket Bolt (4pcs)
#97. 5/16" × 1/2"
Hex Head Bolt (8pcs)
Dyaco Canada Inc.2013
-7-
ASSEMBLY TOOLS
#98. Combination M5(25 × 90m/m)
Allen Wrench & Phillips Head Screw
Driver (1pc)
#100.
13m/m
Wrench (1pc)
#99. M6(68 × 88)
Allen Wrench (1pc)
Dyaco Canada Inc.2013
-8-
F60 ASSEMBLY INSTRUCTIONS
ASSEMBLY STEP 1
1. Remove the treadmill from the carton and position it aside on a smooth, level
floor.The rear should be at least 3’from any wall.Do not remove the Velcro
belt until you have rmoved the plastic wrap and styrofoam from beneath
the unit. Turning the unit on its side after removing the belt may cause
the unit fold up and cause serious injury!
ASSEMBLY STEP 2
1. Connect Computer Cable (Upper/Lower)(44)with Computer Cable(Middle)
(43)then Insert RiGHT AND Left Uprights(4) and(5)into the Frame Base(2)
And use the Wrench(100)to tighten eight Hex Head Bolts(97)and eight Flat
Washers(76)
Before attaching the hardware to Step 3, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
1
2
43
44
4
5
97
97
97
97
76
76
76
76
97
97
76
76
97
97
76
76
100
2
#76. Ø5/16" × Ø18 × 1.5T
Flat Washer (8 pcs)
#97. 5/16" × 1/2”
Hex Head Bolt
(8 pcs)
HARDWARE STEP 2
Dyaco Canada Inc.2013
-9-
ASSEMBLY STEP 3
1. Install Frame Base Cover (L-33&R-34),on the Frame Base(2) and secure with
six Phillips Head Screws (95)by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (98)
ASSEMBLY STEP 4
To complete this step,it is recommended that you find something to rest the
Console on at the appropriate height or have someone hole the console while
You connect the cables.
1. Connect Computer Cable (Upper/Lower)(44) with Computer Cable (Middle)
(43)
Before attacheing the hardware to Step 5, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
3
#95. M5 × 15m/m
Phillips Head Screw
(6 pcs)
HARDWARE STEP 3
4
34
95
95
95
98
Loading...