Sole Fitness 16868392 Owner's Manual

Model : 16868392

OWNER’S MANUAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING
YOUR NEW RECUMBENT!

Z100 / Z300

Z500

Z700

Dyaco Canada Inc. 2013 [e-mail]

2

TABLE OF CONTENTS

Product Registration 3

Important Safety Instructions 4

Important Electrical Information 5

Important Operation Instructions 5

Assembly Instructions 8

Fitness Bike Features 12

Operation of Your New Fitness Bike 13

Programmable Features 16

Using Heart Rate Monitor 21

General Maintenance 23

Exploded View Diagram 24

Parts List 25

Manufacturer's limited warranty 28

ATTENTION

THIS FITNESS BIKE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS
WARRANTY IN ITS ENTIRETY.

Dyaco Canada Inc. 2013 [e-mail]

3

CONGRATULATIONS ON YOUR NEW RECUMBENT AND WELCOME TO THE SOLE
FAMILY!

Thank you for your purchase of this quality Sole recumbent from Dyaco Canada Inc. Your new
recumbent has been manufactured by one of the leading fitness manufacturers in the world
and is backed by one of the most comprehensive warranties available. Dyaco Canada Inc.
will do all we can to make your ownership experience as pleasant as possible for many years
to come.

If you have any questions about your new Sole product or questions about the warranty
contact Dyaco Canada Inc. at 1-888-707-1880.

Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
confidence in SOLE and we will always remember that you are the reason that we are in
business. Please complete and mail your registration card today and enjoy your new
recumbent.

Yours in Health,

Dyaco Canada Inc.

Name of Dealer

Telephone Number of Dealer

Purchase Date

PRODUCT REGISTRATION

RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in
the space provided below.

Serial Number

Dyaco Canada Inc. 2013 [e-mail]

4

IMPORTANT SAFETY INSTRUCTIONS

WARNING

- Read all instructions before using this appliance.

 Do not operate fitness bike on deeply padded, plush or shag carpet. Damage to

both carpet and fitness bike may result.

 Keep children away from the fitness bike. There are obvious pinch points and other

caution areas that can cause harm.

 Keep hands away from all moving parts.
 Never operate the fitness bike if it has a damaged cord or plug. If the fitness bike is

not work- ing properly, call your dealer.

 Keep the cord away from heated surfaces.
 Never drop or insert any object into any openings.
 Do not use outdoors.
 Do not attempt to use your fitness bike for any purpose other than for the purpose it

is intended.

 The hand pulse sensors are not medical devices. Various factors, including the

user’s move- ment, may affect the accuracy of heart rate readings. The pulse
sensors are intended only as exercise aids in determining heart rate trends in
general.

 Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your fitness bike. Quality athletic shoes are recommended to avoid leg
fatigue or injury.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Dyaco Canada Inc. 2013 [e-mail]

5

IMPORTANT ELECTRICAL INSTRUCTIONS

WARNING!
NEVER remove any cover without first disconnecting AC power.

If voltage varies by ten percent (10%) or more, the performance of your fitness bike
may be affected. Such conditions are not covered under your warranty. If you
suspect the voltage is low, contact your local power company or a licensed electrician
for proper testing.
NEVER expose this fitness bike to rain or moisture. This product is NOT designed for
use out- doors, near a pool or spa, or in any other high humidity environment. The
operating tempera- ture specification is 40 to 120 degrees Fahrenheit, and humidity is
95% non-condensing(no water drops forming on surfaces).

IMPORTANT OPERATION INSTRUCTIONS

 NEVER operate this fitness bike without reading and completely understanding the

results of any operational change you request from the computer.

 NEVER use your fitness bike during an electrical storm. Surges may occur in your

household power supply that could damage fitness bike components. Unplug the
fitness bike during an electrical storm as a precaution.

 Do not use excessive pressure on console control keys. They are precision set to

function properly with little finger pressure. If you feel the buttons are not
functioning properly with normal pressure contact your SOLE dealer.

Dyaco Canada Inc. 2013 [e-mail]

6

ASSEMBLY PACK CHECKLIST

1

HARDWARE STEP 1

2

HARDWARE STEP 2

#

65

. 3/8” x 2-1/4”

Hex Head Bolt (4 pcs)

#77

. 3/8”

x 19mm x 1.5T

Flat Washer (6 pcs)

#84

. 3/8” x 25mm x 2T

Flat Washer (4 pcs)

#176

. 3/8” x 3/4”

Hex Head Bolt (6 pcs)

#71

. 3/8” x 1-3/4”

Hex Head Bolt (2 pcs)

#77

. 3/8”

x 19mm x 1.5T

Flat Washer (4 pcs)

#89. 3/8” x 7T
Nyloc Nut (4 pcs)

#175

. 3/8” x 2-3/4”

Hex Head Bolt (2 pcs)

Dyaco Canada Inc. 2013 [e-mail]

7

3

HARDWARE STEP 3

4

HARDWARE STEP4

#68

. 5/16” x 5/8”

Hex Head Bolt (8 pcs)

#76

. 5/16” x 18mm x 1.5T

Flat Washer (6 pcs)

#82

. 5/16” x 1.5T

Split Washer (2 pcs)

#83

. 5/16” x 19mm x 1.5T

Curved Washer (2 pcs)

#98

. M6 x 15mm

Phillips Head Screw (4 pcs)

#99

. M5 x 12mm

Phillips Head Screw (8 pcs)

#105

. Ø4 x 16mm

Sheet Metal Screw (4 pcs)

Dyaco Canada Inc. 2013 [e-mail]

8

ASSEMBLY TOOLS

ASSEMBLY INSTRUCTIONS

PRE-ASSEMBLY

1.

Using a razor knife (Box Cutter) cut the outside, bottom, edge of box

along the dotted Line. Lift Box over the unit and unpack.

2.

Carefully remove all parts from carton and inspect for any damage or

missing parts. If damaged parts are found, or parts are missing,
contact your dealer immediately.

3.

Locate the hardware package. Remove the tools first. Remove the

hardware for each step as needed to avoid confusion. The numbers in
the instructions that are in parenthesis (#) are the item number from
the assembly drawing for reference.

#

112

. 12/14mm Wrench

#

114

. Phillips Head Sc

rew

driver

#132. 14/15mm Wrench

Dyaco Canada Inc. 2013 [e-mail]

9

1

REAR STA BILIZER & SEAT BACK

HARDW

ARE STEP 1

1.

Attach the Rear Stabilizer (7) onto the Main Frame (1) with four Hex Head

Bolts (65) and four Flat Washers (84) using the 12/14mm Wrench (112).

2.

Attach the Seat Back Bracket (5) onto the Seat Carriage (4) with six Hex

Head Bolts (176) and six Flat Washers (77) using the 12/14mm Wrench
(112).

2

SEAT HANDLE BAR

HARDW

ARE STEP 2

1.

Install the Seat Handle Bar (6) onto the Seat Carriage (4) with

two vertical Hex Head Bolts (71), two horizontal Hex Head Bolts
(175), four Flat Washers (77) and four Nyloc Nuts (89) using
the 12/14mm Wrench (112) and 14/15mm Wrench (132).

2.

Plug the two Hand pulse Cables (21) & (27) into the rear two

ports (26) located on the left side rear cover, just under the seat
(see inset illustration).

#65. 3/8” x 2-1/4”
Hex Head Bolt (4 pcs)

#77. 3/8” x 19mm x 1.5T
Flat Washer (6 pcs)

#84. 3/8” x 25mm x 2T
Flat Washer (4 pcs)

#176. 3/8” x 3/4”
Hex Head Bolt (6 pcs)

#71. 3/8” x 1-3/4”
Hex Head Bolt (2 pcs)

#77. 3/8” x 19mm x 1.5T
Flat Washer (4 pcs)

#89. 3/8” x7T Nyloc Nut
(4 pcs)

#175. 3/8” x

2-3/4” Hex

Head Bolt (2 pcs)