Sole Fitness 16867394 Owner's Manual

Model :

Model : Model :

Model : 16867394

1686739416867394

16867394

OWNERÊS MANUAL

OWNERÊS MANUALOWNERÊS MANUAL

OWNERÊS MANUAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING
YOUR NEW UPRIGHT!

Dyaco Canada Inc. 2013 [e-mail]

2

TABLE OF CONTENTS

Product Registration 3

Important Safety Instructions 4

Important Electrical Information 5

Important Operation Instructions 5

Assembly Instructions 7

Fitness Bike Features 10

Operation of Your New Fitness Bike 11

Programmable Features 14

Using Heart Rate Monitor 19

General Maintenance 21

Exploded View Diagram 22

Parts List 23

Manufacturer's limited warranty 25

ATTENTION

THIS FITNESS BIKE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS
WARRANTY IN ITS ENTIRETY.

Dyaco Canada Inc. 2013 [e-mail]

3

CONGRATULATIONS ON YOUR NEW UPRIGHT AND WELCOME TO THE SOLE FAMILY!

Thank you for your purchase of this quality Sole Upright from Dyaco Canada Inc. Your new
Upright has been manufactured by one of the leading fitness manufacturers in the world and
is backed by one of the most comprehensive warranties available. Dyaco Canada Inc. will do
all we can to make your ownership experience as pleasant as possible for many years to
come.

If you have any questions about your new Sole product or questions about the warranty
contact Dyaco Canada Inc. at 1-888-707-1880.

Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
confidence in SOLE and we will always remember that you are the reason that we are in
business. Please complete and mail your registration card today and enjoy your new Upright.

Yours in Health,

Dyaco Canada Inc.

Name of Dealer

Telephone Number of Dealer

Purchase Date

PRODUCT REGISTRATION

RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in
the space provided below.

Serial Number

Dyaco Canada Inc. 2013 [e-mail]

4

IMPORTANT SAFETY INSTRUCTIONS

WARNING - Read all instructions before using this appliance.

 Do not operate fitness bike on deeply padded, plush or shag carpet. Damage

to both carpet and fitness bike may result.

 Keep children away from the fitness bike. There are obvious pinch points and

other caution areas that can cause harm.

 Keep hands away from all moving parts.
 Never operate the fitness bike if it has a damaged cord or plug. If the fitness

bike is not working properly, call your dealer.

 Keep the cord away from heated surfaces.
 Never drop or insert any object into any openings.
 Do not use outdoors.
 Do not attempt to use your fitness bike for any purpose other than for the

purpose it is intended.

 The hand pulse sensors are not medical devices. Various factors, including the

user’s move- ment, may affect the accuracy of heart rate readings. The pulse
sensors are intended only as exercise aids in determining heart rate trends in
general.

 Wear proper shoes. High heels, dress shoes, sandals or bare feet are not

suitable for use on your fitness bike. Quality athletic shoes are recommended
to avoid leg fatigue or injury.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Dyaco Canada Inc. 2013 [e-mail]

5

IMPORTANT ELECTRICAL INSTRUCTIONS

WARNING!
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your fitness bike
may be affected. Such conditions are not covered under your warranty. If you
suspect the voltage is low, contact your local power company or a licensed electrician
for proper testing.
NEVER expose this fitness bike to rain or moisture. This product is NOT designed for
use outdoors, near a pool or spa, or in any other high humidity environment. The
operating tempera- ture specification is 40 to 120 degrees Fahrenheit, and humidity is
95% non-condensing (no water drops forming on surfaces).

IMPORTANT OPERATION INSTRUCTIONS

 NEVER operate this fitness bike without reading and completely

understanding the results of any operational change you request from the
computer.

 NEVER use your fitness bike during an electrical storm. Surges may occur in

your household power supply that could damage fitness bike components.
Unplug the fitness bike during an electrical storm as a precaution.

 Do not use excessive pressure on console control keys. They are precision set

to function properly with little finger pressure. If you feel the buttons are not
functioning properly with normal pressure contact your dealer.

Dyaco Canada Inc. 2013 [e-mail]

6

ASSEMBLY PACK CHECKLIST

1

HARDWARE STEP 1

2

HARDWARE STEP 2

3

HARDWARE STEP 3

4

HARDWARE STEP 4

#50

. 3/8” x 2-1/4”

Hex Head Bolt (2 pcs)

#58

. M5 x 12mm
Phillips Head Screw
(2 pcs)

#71

. 3/8” x 25mm x 2T

Flat Washer (2 pcs)

#51

. 5/16” x 5/8”

Hex Head Bolt (7 pcs)

#72

. 5/16” x 18mm x 1.5T

Flat Washer (6 pcs)

#99

. 5/16” x 19mm x 1.5T

Curved Washer (1 pc)

#51

. 5/16” x 5/8”

Hex Head Bolt (2 pcs)

#72

. 5/16” x 18mm x 1.5T

Flat Washer (2 pcs)

#103

. 5/16” x 1.5T

Split Washer (2 pcs)

#58

. M5 x 12mm

Phillips Head Screw (6 pcs)

Dyaco Canada Inc. 2013 [e-mail]

7

ASSEMBLY TOOLS

ASSEMBLY INSTRUCTIONS

PRE-ASSEMBLY

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box. Lift
Box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or
missing parts. If damaged parts are found, or parts are missing, contact
your dealer immediately.

3. Locate the hardware package. Remove the tools first. Remove the
hardware for each step as needed to avoid confusion. The numbers in the
instructions that are in parenthesis (#) are the item number from the
assembly drawing for reference.

#92. 13/15mm Wrench #93. Phillips Head Screwdriver

#100. 12/14mm Wrench

Dyaco Canada Inc. 2013 [e-mail]

8

#50. 3/8” x 2-1/4”
Hex Head Bolt (2 pcs)

#58. M5 x 12mm Phillips
Head Screw (2 pcs)

#71. 3/8” x 25mm x 2T
Flat Washer (2 pcs)

#51. 5/16” x 5/8”
Hex Head Bolt (7 pcs)

#72. 5/16” x 18mm x 1.5T
Flat Washer (6 pcs)

#99. 5/16” x 19mm x 1.5T
Curved Washer (1 pc)

1

REAR STABILIZER

HARDWARE STEP 1

1. Attach the Rear Stabilizer Cover (41) to the Rear Stabilizer (5)
with twoPhillips Head Screws (58). Tighten with the Phillips
Head Screw Driver (93).

2. Attach the Rear Stabilizer (5) to the Main Frame (1) by sliding
two Flat Washers (71) onto two Hex Head Bolts (50); insert
the bolts through the Rear Stabilizer Attachment Plate
(131), then into the rear stabilizer. Tighten using the 12/14
mm Wrench (100).

2

CONSOLE MAST

HARDWARE STEP 2

1. Unravel the Computer Cable (29) and pull the twist tie wire
through the Console Mast Cover (38) (see illustration for the
correct orientation of the cover)and the Console Mast (2) until
the cable connector comes out the top opening of the Console
Mast.

2. Attach the Console Mast (2) onto the Main Frame (1) with
the seven Hex Head bolts (51). Place six Flat Washers (72)
on the side bolts and one Curved Washer (99) on the front
bolt. Tighten using the 12/14mm Wrench (100).