Sole Fitness 16810385 Owner's Manual
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW TREADMILL!
Model :16810385
OWNER’S MANUAL
TABLE OF CONTENTS
PRODUCT REGISTRATION……………………… ……….2
IMPORTANT SAFETY INSTRUCTIONS…………………...3
IMPORTANT ELECTRICAL INSTRUCTIONS…………….4
IMPORTANT OPERATION INSTRUCTIONS……………..5
IMPORTANT SAFETY INSTRUCTIONS…………………..6
ASSEMBLY PACK CHECKLIST…………………………….7
ASSEMBLY INSTRUCTIONS………………………………..9
OPERATION OF YOUR TREADMILL……………………...14
PROGRAMMABLE FEATURES…………………………….18
GENERAL MAINTENANCE………………………………….25
SERVICE CHECKLIST - DIAGNOSIS GUIDE……………..28
EXPLODED VIEW DIAGRAM……………………………..…30
PARTS LIST ………………….…………………………..……31
MANUFACTURER’S LIMITED WARRANTY………………..36
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE
FAMILY!
Thank you for your purchase of the Sole treadmill from Dyaco Canada Inc. Your new
treadmill has been manufactured by one of the leading fitness manufacturers in the world
and is backed by one of the most comprehensive warranties available. Dyaco Canada Inc.
will do all we can to make your ownership experience as pleasant as possible for many
years to come.
If you have any questions about your new Sole product or questions about the warranty
contact Dyaco Canada Inc. at 1-888-707-1880.
If you purchased this fitness product from Sears, they will be your contact for all service
needs. To contact Sears for any service issues call 1-800-4-MY-HOME(1-800-469-4663).
Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
confidence in SOLE and we will always remember that you are the reason that we are in
business. Please complete and mail your registration card today and enjoy your new
treadmill.
Yours in Health,
Dyaco Canada Inc.
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product
in the space provided below.
Serial Number
DyacoCanadaInc.2013
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your treadmill from the
electrical outlet prior to cleaning and/or service work.
WARNING
the treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet
with only the treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER,
WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE
GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY
MODIFY THE CORD SET .
A serious shock or fire hazard may result along with computer malfunctions. See Grounding
Instructions, page 3.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to
both carpet and treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.
Keep children away from the treadmill. There are obvious pinch points and other
caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not
working properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly gaseous
environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, remove tether cord, then
remove the plug from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it
is intended.
The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Use handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not
suitable for use on your treadmill. Quality athletic shoes are recommended to
avoid leg fatigue.
Remove tether cord after use to prevent unauthorized treadmill operation.
SA VE THESE INSTRUCTIONS - THINK SAFETY!
- To reduce the risk of burns, fire, electric shock, or injury to persons, install
DyacoCanadaInc.2013
3
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with
any appliance with a large motor, the GFCI will trip often. Route the power cord away from
any moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The maximum
operating temperature specification is 40 degrees c, and humidity is 90% non-condensing
(no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush
currents that can occur when a treadmill is first turned on or even during use. If your
treadmill is tripping the house circuit breaker (even though it is the proper current rating) but
the circuit breaker on the treadmill itself does not trip, you will need to replace the home
breaker with a high inrush type. This is not a warranty defect. This is a condition we as a
manufacture have no ability to control. This part is available through most electrical supply
stores. Examples: Grainger part # 1D237, or available online at www.squared.com part #
QO120HM.
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdown,
grounding provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided with
the product if it will not fit the outlet; have a proper outlet installed by a qualified
electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug
that looks like the plug illustrated below. A temporary adapter that looks like the adapter
illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if
a properly grounded outlet is not available. The temporary adapter should be used only until
a properly grounded outlet, (shown below) can be installed by a qualified electrician. The
green colored rigid ear-lug, or the
like, extending from the adapter,
must be connected to a
permanent ground such as a
properly grounded outlet box cover.
Whenever the adapter is used, it
must be held in place by a metal
screw.
DyacoCanadaInc.2013
4
IMPORTANT OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the
results of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The
computer will obey the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your
household power supply that could damage treadmill components. Unplug the
treadmill during an electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such
as watching television, reading, etc. These distractions may cause you to lose
balance or stray from walking in the center of the belt; which may result in serious
injury.
NEVER mount or dismount the treadmill while the belt is moving. Treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply
standing on the belt during slow acceleration is proper after you have learned to
operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline,
speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure. Pushing harder is not going to make the
unit go faster or slower. If you feel the buttons are not functioning properly with
normal pressure contact your dealer.
IMPORTANT SAFETY INSTRUCTIONS
A safety tether cord is provided with this unit and should be used at all times. It is for your
safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord
will stop tread-belt movement.
To Use:
1. Place the safety key into position on the console control head. Your treadmill will not
start and operate without this. Removing the safety key also secures the treadmill
from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power.
Note: The clip should be attached securely to make certain it does not come off.
Be familiar with its function and limitations. The treadmill will stop, depending on
speed, with a one to two step coast anytime the safety key is pulled off the
console. Use the red switch in normal operation.
DyacoCanadaInc.2013
5
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill
could spring open unexpectedly and cause injury if someone is standing near the
treadmill when the strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure
the treadmill is positioned flat on the ground, in the orientation it would be in if you were
using the treadmill. Do not turn the treadmill up on its side while removing the shipping
strap. This could cause the treadmill’s folding mechanism to spring open. If the end of the
Velcro strap (that you need to grab to remove it) happens to be under the treadmill deck,
reach under the deck to grab it, but do not tilt the treadmill up to gain access to the strap
end.
PREVENTATIVE MAINTENANCE CHART
Clean & Inspect
Vacuum Under
Motor Cover &
Check Wiring
Deck for
Lubrication
(Every Other
Month)
Lubricate Deck
(Every 90 hours
or sooner if dry)
Inspect Belt
Tracking
(Monthly)
Adjust if
necessary
Date
DyacoCanadaInc.2013
6
ASSEMBLY PACK CHECKLIST
HARDWARE STEP 2
2
#128. M5
Speed Nut Clip (6 pcs)
HARDWARE STEP 3
3
#130. 5/16” x 1/2” Button
Head Socket Bolt (8 pcs)
5
6
HARDWARE STEP 5
#113. Ø 10 x 2T Split
Washer (4 pcs)
HARDWARE STEP 6
#168. 3.5 x 16mm
Sheet Metal Screw (6 pcs)
#133. 3/8” x 1-3/4” Button
Head Socket Bolt (4 pcs)
DyacoCanadaInc.2013
7
7
8
HARDWARE STEP 7
#151. 5/16” x 3/4”
Button Head Socket Bolt (4 pcs)
#75. Safety Key
HARDWARE STEP 8
#120. 5 x 16mm
Tapping Screw (6 pcs)
ASSEMBLY TOOLS
#131. Combination M5 Allen Wrench
& Phillips Head Screw Driver
#132. M6 L Allen Wrench
#30. Lubricant
DyacoCanadaInc.2013
8
ASSEMBLY INSTRUCTIONS
ASSEMBLY STEP 1
1
1. Remove the treadmill from the carton and position it aside on a smooth,
level floor. The rear should be at least 3’ from any wall. Do not remove the
Velcro belt until you have removed the plastic wrap and Styrofoam from
beneath the unit. Turning the unit on its side after removing the belt
may cause the unit fold up and cause serious injury!
ASSEMBLY STEP 2
2
HARDWARE STEP 2
#128. M5 Speed Nut
Clip (6 pcs)
1. Install the six Speed Nut Clips (128) on the Frame Base left and right side.
2. Slide the lower handlebar covers (65 & 67R) onto the console masts
3. Slide the Frame Base Caps (161 L & 162 R) over the Upright tubes (4
Before attaching the hardware to Step 3, make sure the cables you just
connected don’t get pinched in betw een the steel tubing. If they do, this may
cause issues that prevent the treadmill from operating properly.
DyacoCanadaInc.2013
(notice orientation).
& 5). Connect the Lower Computer Cable (49) to the Middle Computer
Cable (50) on the right side of the unit.
9
3
ASSEMBLY STEP 3
1. Attach the Upright Tubes (4 & 5) onto the Frame Base (2) with eight
Button Head Socket Bolts (130) by using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (131). Do not tighten the bolts
completely until Step 7 is finished.
HARDWARE STEP 3
#130. 5/16” x 1/2” Button
Head Socket Bolts
(8 pcs)
ASSEMBLY STEP 4
4
To complete this step, it is recommended that you find something to rest
the console on at the appropriate height or have someone hold the
console while you connect the cables
1. Connect the Speed Adjustment Switch Cable (54) to the Speed Cable, Upper
(37). Connect the Incline Adjustment Switch Cable (55) to the Incline
Cable, Upper (38). Connect the Computer Cable, Middle (50) and
Computer Cable, Upper (48). Tuck the excess cable into the hand rail
Before attaching the hardware to Step 5, make sure the cables you just
connected don’t get pinched in betw een the steel tubing. If they do, this may
cause issues that prevent the treadmill from operating properly.
DyacoCanadaInc.2013
tubing to prevent it from getting pinched.
10
5
6
ASSEMBLY STEP 5
132
52
113
133
1. Attach the Console Assembly (52) onto the Upright Tubes (4 & 5) and
attach with four Button Head Socket Bolts (133) and four Split Washers
(113). Tighten using the M6 Allen Wrench (132). Tighten completely.
113
133
5
4
ASSEMBLY STEP 6
HARDWARE STEP 5
#133. 3/8” x 1-3/4”
Button Head Socket
Bolts (4 pcs)
#113. Ø10mm x 2T Split
Washers (4 pcs)
HARDWARE STEP 6
#168. 3.5 x 16mm Sheet
Metal Screws (6 pcs)
1. Attach the Left (63 & 65) and Right (66 & 67) Upper and Lower Handlebar
Covers to the top of the Upright Tubes (4 & 5) with six Sheet Metal
Screws
(168). Tighten with the Combination M5 Allen Wrench & Phillips Head
Screw
Driver (131).
DyacoCanadaInc.2013
11
Loading...