Sole Fitness E25, 16608900350 Owner's Manual
TABLE OF
WARNING:
Product Registration 1
Important Safety Instructions 2
Important Electrical Information 3
Important Operation Instructions 4
Transport Instructions 4
E25 Assembly Instructions 7
CONTENTS
Operation of Your New Elliptical 12
Bluetooth® Connectivity 15
Programmable Features 16
Using Heart Rate Monitor 21
General Maintenance 23
Manufacturer’s Limited Warranty 24
Acrylamide which are known to the State of California to cause Cancer and birth defects
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This product can expose you to chemicals including Toluene and
ATTENTION
THIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THE
APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.
Before returning your Sole product to any retailer, or if you require an
assistance with assembly or technical support please call us first for
assistance at 866-697-6531. Thank you for your Sole purchase.
E25 _2019 Ver.C
y
1 E25 ELLIPTI
CAL
CONGRATULATIONS ON YOUR NEW ELLIPTICAL AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality elliptical from SOLE. Your new elliptical has been manufactured by
one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive
warranties available. SOLE will do all we can to make your ownership experience as pleasant as possible for
many years to come.
If you have any questions about your new product contact SOLE Fitness at 866-780-SOLE (7653).
If you have a technical problem with your new elliptical contact SOLE technical service at 866-MYSOLE1
(1-866-697-6531).
Please take a moment at this time to record below the name of the dealer, their telephone number, and the
date of purchase for easy contact in the future. We appreciate your confidence in SOLE and we will always
remember that you are the reason that we are in business. Please complete and mail your registration card
today and enjoy your new elliptical.
Yours in Health,
SOLE Fitness
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT
RECORD YOUR SERIAL NUMBER
Please record the Serial Number
of this fitness product in the
space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to SOLE.
You can also go to www.soleellipticals.com under the support tab to register online.
REGISTRATION
E25 ELLIPTI
CAL 2
IMPORTANT
WARNING - Read all instructions before using this appliance.
SAFETY
INSTRUCTIONS
DANGER - To reduce the risk of electric shock disconnect your SOLE elliptical from the electrical
outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install
the elliptical on a flat level surface with access to a 115-volt, 15-amp grounded outlet with only
the elliptical plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.
A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 3.
Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet
and elliptical may result.
Keep children under the age of 13 away from this machine. There are obvious pinch
points and other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working
properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position and then remove the plug from the
outlet.
Do not attempt to use your elliptical for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use
on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.
This appliance is not intended for use by persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
3 E25 ELLIPTI
CAL
IMPORTANT
ELECTRICAL
INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your elliptical may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The operating temperature
specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing
(no water drops forming on surfaces).
GROUNDING INSTRUCTIONS
This product must be grounded. If the elliptical should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded
outlet is not available. The temporary adapter should be used only until a properly grounded
outlet, (shown below) can be installed by a qualified electrician. The green colored rigid ear-lug,
or the like, extending from the adapter, must be connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a
metal screw.
E25 ELLIPTI
CAL 4
IMPORTANT
NEVER operate this elliptical without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in resistance and incline do not occur immediately. Set your
desired resistance level on the computer console and release the adjustment key. The
computer will obey the command gradually.
NEVER use your elliptical during an electrical storm. Surges may occur in your household
power supply that could damage elliptical components. Unplug the elliptical during an
electrical storm as a precaution.
Use caution while participating in other activities while using your elliptical; such as
watching television, reading, etc. These distractions may cause you to lose balance; which
may result in serious injury.
Always hold on to a handle bar while making control changes (incline, level, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. If you feel the buttons are not functioning properly with
normal pressure contact your SOLE dealer.
POWER CONNECTOR - FRONT, LEFT SIDE OF UNIT
OPERATION
INSTRUCTIONS
TRANSPORT
The elliptical is equippped with two transport wheels which are engaged when
the rear of the elliptical is lifted.
INSTRUCTIONS
5 E25 ELLIPTI
CAL
E25
ASSEMBLY PACK CHECKLIST
1
HARDWARE
#171. 3/8” x 19 x 1.5T
Flat Washer (6 pcs)
#175. 3/8” x 2T
Split Washer (4 pc)
#176. 5/16” x 1.5T
Split Washer (4 pcs)
#124. 5/16” x 2-1/4”
Hex Head Bolt (4 pcs)
STEP 1
#166. 5/16” x 20 x 1.5T
Flat Washer (4 pcs)
#140. M5 x 10mm
Phillips Head Screw (6 pcs)
#177. 5/16”
Star Washer (4 pcs)
#128. 3/8” x 1-1/2”
Hex Head Bolt (2 pcs)
#158. 3/8” x 7T
Nylon Nut (2 pcs)
#129. 3/8” x 3/4”
Socket Head Cap Bolt
(4 pc)
E25 ELLIPTI
CAL 6
HARDWARE
STEP 2
2
3
#65. Switch Wire Cap
(2 pcs)
#198. Ø17
Wave Washer (2 pcs)
HARDWARE
STEP 3
#120. 5/16"×18×15L
Hex Head Bolt (2 pcs)
#167. 5/16” x 23x 1.5T
Nyloc Nut (2 pcs)
4
#122. 5/16"×1-1/4"
Hex Head Bolt (2 pcs)
HARDWARE
#138. M5 x 15mm
Phillips Head Screw
(20 pcs)
STEP 4
#166. 5/16" x 20 x 1.5T
Flat Washer (2 pcs)
#145. 3.5 x 12mm
Sheet Metal Screw
(16 pcs)
#155. 5/16" x 7T
Nyloc Nut (2 pcs)
#146. M6 x 10mm
Phillips Head Screw
(4 pcs)
7 E25 ELLIPTI
CAL
ASSEMBLY
TOOLS
#186.
13/14mm Wrench
#188. Phillips Head Screwdriver
#189.
12/14mm Wrench
#197. L Allen Wrench
#187.
Short Phillips
Head Screwdriver
E25
ASSEMBLY
PRE
-ASSEMBLY
1. Use a razor knife or box cutter to cut the outside, bottom, and the edge of
the box along the dotted Line. Lift the box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or if parts are missing, contact your dealer
immediately.
3. Locate the hardware package. Remove the tools first. Remove the hardware
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference.
INSTRUCTIONS
Loading...