Sole Fitness ST600, 16608706000 Owner's Manual
TABLE OF CONTENTS
Product Registration
Important Safety Instructions
Important Operation Instructions
Assembly Instructions
Operation of Your New Strider
Exploded View Diagram
Parts List
Training Guidelines
Using Heart Rate Monitor
Manufacturer’s Limited Warranty
2
3
4
5
16
25
27
30
35
36
ATTENTION
THIS STRIDER IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS
THIS WARRANTY IN ITS ENTIRETY.
- 1 -
CONGRATULATIONS ON YOUR NEW ROWER AND WELCOME TO THE SOLE
CONGRATULATIONS ON YOUR NEW STRIDER AND WELCOME TO THE SOLE FAMILY!
FAMILY!
Thank you for your purchase of this quality Sole Strider from Dyaco Canada Inc. Your
new strider has been manufactured by one of the leading fitness manufacturers in the
world and is backed by one of the most comprehensive warranties available. Dyaco
Canada Inc. will do all we can to make your ownership experience as pleasant as
possible for many years to come.
If you have any questions about your new Sole product or questions about the warranty
contact Dyaco Canada Inc. at 1-888-707-1880.
Please take a moment at this time to record below the name of the dealer, their
telephone number, and the date of purchase for easy contact in the future. We
appreciate your confidence in SOLE and we will always remember that you are the
reason that we are in business. Please complete and mail your registration card today
and enjoy your new Strider.
Yours in Health,
Dyaco Canada Inc.
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in
the space provided below.
Serial Number
- 2 -
IMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing our product. Even though we go to great efforts to ensure the
quality of each product we produce, occasional errors and /or omissions do occur. In
any event should you find this product to have either a defective or a missing part
please contact us for a replacement.
This exercise equipment was designed and built for optimum safety. However, certain
precautions apply whenever you operate a piece of exercise equipment. Be sure to read
the entire manual before assembly and operation of this machine. Also, please note the
following safety precautions:
1. Read the OWNER’S OPERATING MANUAL and all accompanying literature and
follow it carefully before using your strider.
2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced
while using this equipment, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
3. Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts
are fully tightened before each use.
4. The strider must be regularly checked for signs of wear and damage. Any part found
defective must be replaced with a new part from the manufacturer.
5. Fitness equipment must always be installed on a flat surface. It is recommended to
use an equipment mat to prevent the unit from moving while it is being used, which
could possibly scratch or damage the surface of your floor.
6. No changes must be made which might compromise the safety of the equipment.
7. It is recommended to have a minimum of 2’ safe clearance around the exercise
equipment while in use.
8. Do not allow children to use or play on the strider. Keep children and pets away from
this equipment at all times while exercising.
9. The strider should only be used by one person at a time.
10. Maximum user weight 350lbs (157KG).
11. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes
afterward. This allows your heart rate to gradually increase and decrease and will
help prevent you from straining muscles.
12. Never hold your breath while exercising. Breathing should remain at a normal rate in
conjunction with the level of exercise being performed .
13. Always wear suitable clothing and footwear while exercising. Do not wear loose
fitting clothing that could become entangled with the moving parts of your strider. Do
not exercise in bare feet or socks. Proper footwear such as running, walking or cross
training shoes should be worn.
14. Tie all long hair back. Remove all personal jewelry before exercising.
15. Be careful to maintain your balance while using, mounting, dismounting the strider,
loss of balance may result in a fall and bodily injuries.
16. After eating, allow 1-2 hours before exercising as this will help to prevent muscle
strain.
17. Injuries may result from incorrect or excessive training and using the equipment
other than as directed or recommended by your doctor.
- 3 -
19. Care must be taken when lifting or moving the equipment, so as not to injure your
back. Always use proper lifting techniques
20. A decal like the example shown below has been placed on the strider. If the decal
is missing or illegible, please call our Customer Service Department toll-free at
1-888-707-1880 to order a replacement decal. Apply the decal in the location
shown.
FITNESS EQUIPMENT OPERATION INSTRUCTIONS:
• To disconnect, turn all controls to the off position, then remove the plug from the outlet.
• Do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and
equipment may result.
• Before beginning this or any exercise program, consult a physician. This is especially important
for persons over the age of 35 or persons with pre-existing health conditions.
• Keep hands away from all moving parts.
• The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids
in determining heart rate trends in general.
• Do not attempt to use your equipment for any purpose other than for the purpose it is intended.
• Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your equipment. Quality athletic shoes are recommended to avoid leg fatigue.
Failure to follow all guidelines may compromise the effectiveness of the exercise
experience, expose yourself (and possibly others) to injury, and reduce the longevity of the
equipment.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT
YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER
THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS.
READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. WE
ASSUME NO RESPONSIBILITY FOR PEROSNAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS – THINK SAFETY!
CAUTION! Please be careful when unpacking the carton.
- 4 -
Customer Service
1-888-707-1880 or
customerservice@dyaco.ca
Dyaco Canada Inc.©2017
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY:
Main Frame
Handle bar (R)
Central Supporting Tube
Side Connecting Tube (R)Side Connecting Tube (L)
BEFORE YOU BEGIN
Thank you for choosing the Sole ST600 Strider. We take great pride in producing this quality
product and hope it will provide many hours of quality exercise to make you feel better, look
better, and enjoy life to its fullest. It's a proven fact that a regular exercise program can
improve your physical and mental health. Too often, our busy lifestyles limit our time and
opportunity to exercise. The Sole ST600 Strider provides a convenient and simple method to
begin your assault on getting your body in shape and achieving a happier and healthier
lifestyle. Before reading further, please review the drawing below and familiarize yourself with
the parts that are labeled.
Read this manual carefully before using the Sole ST600 Strider. Although Dyaco Canada Inc.
constructs its products with the finest materials and uses the highest standards of
manufacturing and quality control, there can sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with the parts included with your Sole ST600 Strider
please do not return the product. Contact us FIRST! If a part is missing or defective call us toll
free at 1-888-707-1880. Our Customer Service Staff are available to assist you from 8:30 A.M. to
5:00 P.M. (Eastern Time) Monday through Friday. Be sure to have the name and model number
of the product available when you contact us.
Handle bar (R)
Console Supporting Tube
Left Pedal
Pedal Supporting Tube (R)
Side Tube Cover (R)
Side Tube Cover (L)
4mm 5mm 6mm*2
Console
Bottle Holder
Right Pedal
Pedal Supporting Tube (R)
#19
- 5 -
POLYFOAM(1)
Warning:
POLYFOAM(2)
Unpacking Caution:
A. Lay the box down flat so that the lid can be lifted. Unpack the handle bars, side supporting tubes,
pedal supporting tube and owners manual. Remove the top polyfoam pieces #1 & #2 and finish
unpacking the console, console supporting tube, central supporting tube, pedal supporting tube and
hardware bag. Please leave the main frame(A) and bottom polyfoam pieces #3 & #4 inside the box
until instructed to remove them.
B. Note: FOR SAFETY REASONS, DO NOT turn the pedal locking feature knob to the unlock position
until instructed to do so at the end of the assembly.
- 6 -
2#465.+56
Main frame
B1 Pedal supporting
tube (L)
B2 Pedal supporting
tube (R)
Console
Console supporting
tube
Bot
r
E1 Handle bar (L)
E2 Handle bar (R)
F1 Central
supporting tube
C2 Side connecting tube (R)
C1 Side connecting
tube (L)
F2 Iron bracket
Side tube cover set
Side tube cover set
- 7 -
2#465.+56
(J6) Screw M8X20
(J4) Screw M8X55
(J10) Screw M12X109
(J7) Screw M12X73
(J13) Screw M8X16
(J9) Nut M12
(J2) Screw M4X16 (J3) Screw M4X6
(J14) Screw M5
(J8) Washer M12
(J5) Washer M8
4mm
#19
6mm*2
5mm
- 8 -
CENTRAL SUPPORTING TUBE (F1) ASSEMBLY
Step 1. Remove the two pre-assembled screws (J1) from the
main frame (A) and two screws (J1) from the central
supporting tube (F1).
Step 2. Assemble the central supporting tube (F1) onto
the main frame (A) use the previously removed
screws (J1) to join them.
SIDE TUBE COVER SETS (L+R) ASSEMBLY
Step 1. Connect the right side tube cover (R2) onto the cover (R1) and secure using screw (J2).
Step 2. Follow the step 2-1 to 2-4 to assemble the side tube cover sets.
2-1. Connect the covers (R1 & R2) onto the right side connecting tube (C2).
2-2. Connect the cover (R3) onto the tube (C2).
2-3. Connect the cover (R4) onto the tube (C2).
2-4. Secure the cover set by screw (J3) first then two screws (J2) as shown in the diagram.
Step 3. Repeat these steps to assemble the
left side tube cover set (L).
USE TOOL:6mm
F1
J1
A
NOTE: Only hand tighten the screws (J1)
until assembly is fully completed
in “Figure 4”.
Step 1.
R1
R2
R1 & R2
R3
R4
J2 J3
J2
J2
J2
J3
2-1.
2-2.
2-3.
USE TOOL:4mm
(Phillips Screw Driver)
C2
- 9 -
Step 1. Attach the left side connecting tube (C1) onto
the main frame (A).
Step 2. Secure it using screw (J6) on the top and the
two screws (J4), two washers(J5) with the
bracket (F2) on the bottom, similar to (C2) in
“Figure 3”.
Step 3. Tighten all the screws (J1, J4, and J6) in
“Figure 1” to “Figure 4”.
Note: Make sure the central supporting tube
is assembled in a proper position in
relation to the main frame tube, to
avoid the foot pedals hitting the
central support tube.
LEFT SIDE CONNECTING TUBE ASSEMBLY
USE TOOL:6mm
RIGHT SIDE CONNECTING TUBE ASSEMBLY
Step 1. As shown in diagrams(A & B) attach the right side connecting tube
(C2) assembly to the machine.
Step 2. As shown in (A) attach the tube (C2) assembly onto the upper main
frame. Use one screw (J6) to join the tube to the frame.
Step 3. As shown in (B) se two screws (J4), two washers (J5) and the
bracket (F2) to join the tube to the frame on the bottom.
Note: Only hand tighten the screws (J4 & J6) until assembly is fully completed
in “Figure 4”.
USE TOOL:6mm
J6
C2
J4
J4
F2
C2
C2
Step 4.
With the assistance of a second
person raise the main frame (A)
and then remove the Polyfoam as
shown in the diagram.
A
J5
J5
J6
J4
J5
C1
A
- 10 -
Step 2. As shown in (D) connect and align the
PEDAL SUPPORTING TUBE ASSEMBLY
Step 1. As shown in (C) connect the right
pedal supporting tube (B2) to the main
frame (A). Use the tools provided to
tighten screw (J7), washer (J8) and nut (J9).
right lower pedal supporting tube (B5) to the front pedal
supporting tube on the main frame (A). Use the tools
provided to tighten screw (J10), washer (J8) and
nut(J9).
Step 3. As shown in (E) firmly tighten the pre-installed
screw (J10) and nut (J9) firm.
Step 4. Repeat these steps to assemble the
left pedal supporting tube (B1).
A
J8
J9
J7
B2
J9
J10
B5
J8
USE TOOL:6m/m
#19
HANDLE BAR ASSEMBLY
Step 1. Remove the six pre-installed screws (J11 & J12) from
the left handle bar (E1) .
Step 2. As shown in (F) assemble the left handle
tighten the six pieces (J11&J12).
Note: Make sure to tighten handle bar screws
securely to prevent a clicking noise
in the handle bars. Wiggle the handle bars to help
to help thread the screws in place and then tighten fully.
Step 3. Repeat these steps to assemble the right handle bar (E2).
A
E1
J11*6
J12*6
J12
bar (E1) into the main frame (A).
J12
Use the two 6mm allen wrenches to
J12*6
J11*6
J12
J11
USE TOOL:6mm*2
- 11 -
Loading...