SOLE SB900 Owner's Manual

Model: 16208579000

OWNER’S MANUAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR
NEW INDOOR CYCLE

Dyaco Canada Inc 2015 [e-mail] 2

TABLE OF CONTENTS

PRODUCT REGISTRATION………………………………….…………3

IMPORTANT SAFETY INSTRUCTIONS………………………….…….4

IMPORTANT OPERATION INSTRUCTIONS………….……………….4

ASSEMBLY PACK CHECKLIST………………………………………...5

ASSEMBLY INSTRUCTIONS………………………………….………...6

OPERATION OF YOUR INDOOR CYCLE……………….……….…...10

FIRST TIME USER INSTRUCTIONS………………….…………..…..14

REPLACING SENSOR TRANSMITTER BATTERIES………..…..…17

EXPLODED VIEW DRAWING..…………………………………………18

PARTS LIST……………………………………………………………….19

MANUFACTURER’S LIMITED WARRANTY ……………………….22

Dyaco Canada Inc 2015 [e-mail] 3

CONGRATULATIONS ON YOUR NEW INDOOR CYCLE TRAINOR AND WELCOME TO
THE SOLE FAMILY!

Thank you for your purchase of this quality Sole indoor cycle from Dyaco Canada Inc. Your
new indoor cycle has been manufactured by one of the leading fitness manufacturers in the
world and is backed by one of the most comprehensive warranties available. Dyaco
Canada Inc. will do all we can to make your ownership experience as pleasant as possible
for many years to come.

If you have any questions about your new Sole product or questions about the warranty
contact Dyaco Canada Inc. at 1-888-707-1880.

Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
confidence in SOLE and we will always remember that you are the reason that we are in
business. Please complete and mail your registration card today and enjoy your new indoor
cycle trainor.

Yours in Health,
Dyaco Canada Inc.

Name of Dealer
Telephone Number of Dealer
Purchase Date

PRODUCT REGISTRATION

RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in
the space provided below.

Serial Number

Dyaco Canada Inc 2015 [e-mail] 4

IMPORTANT SAFETY INSTRUCTIONS

WARNING - Read all instructions before using this appliance.

1. Use this equipment only for its intended use as described in this manual. Do not attempt to ride this bike
at high pedal speeds until you have ridden the bike for some time and are comfortable riding at slower
pedal speeds.

2. The bike is NOT equipped with a freewheel system which means that when the flywheel is in motion, the
pedals will be in motion. Do not attempt to stop the unit by applying backward pressure to pedals while
they are turning as knee injury may occur. Do not attempt to remove your feet from pedals while they are
moving.

3. Wait for flywheel to coast to a stop before dismounting the bike. If you want to stop the flywheel, push
down on the brake knob.

4. Serious injury or death may occur from over-training. Consult a medical doctor or qualified fitness
instructor to determine an exercise program appropriate for your level of fitness.

5. Do not attempt to turn the pedal cranks by hand. Do not touch any driving mechanism while it is in motion
as possible injury could occur.

6. In a home setting, keep children away from the bike when it is not in use. Keep children and pets away
from the unit while it is in use.

7. Do not attempt to perform dip movements on handlebars.

8. Never drop or insert any object into any opening of the bike.

9. Only use the bike on a stable, level floor.

10. Follow instructions for safe use of the equipment including proper seat position, handlebar position, and
use of foot positioning system of pedals. Do not attempt to pull up handlebar post and seat post over the
‘MAX.’ graduation.

11. For safe operation, allow for at least 1foot (30cm) of free space to either side of the unit and 2 feet (60cm)
of free space to the rear of the unit.

Regularly examine the bike for damage and wear. Inoperable comp onent s shoul d be repla ced immediately or
the equipment should not be used until it is repaired.

Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself
(and possibly others) to injury, and reduce the longevity of the equipment.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

IMPORTANT OPERATION INSTRUCTIONS

WARNING - AS THE OWNER OF THIS EXERCISE EQUIPMENT, YOU SHOULD INSIST THAT ALL
USERS FOLLOW THE

SAME GUIDELINES: YOU SHOULD MAKE THIS MANUAL AVAILABLE TO ALL USERS.

1. Obtain a complete physical examination from your medical doctor and enlist a health/ fitness
professional’s aid in developing an exercise program suitable for your current health status.

2. When working out for the first time, start out slowly for a minimum of five minutes. After your muscles are
warmed up, gradually increase the pedaling speed and/or resistance.

3. The speed and duration of your exercise program should always be subject to how you feel. Never permit
peer pressure to exceed your personal judgment while exercising.

4. Overweight or severely de-conditioned individuals should be particularly cautious when using the
equipment for the first time. Even though such individuals may not have histories of serious physical
problems, they may perceive the exercise to be far less intense than it really is, resulting in the possibility
of overexertion or injury.

5. Proper installation and regular maintenance are required to ensure user’s safety.

Maintenance is the sole responsibility of the owner.

Dyaco Canada Inc 2015 [e-mail] 5

3

ASSEMBLY PACK CHECKLIST

HARDWARE STEP 1

HARDWARE STEP 2

HARDWARE STEP 3

ASSEMBLY TOOLS

1

#82. 3/8”

Nut (4 pcs)

#81. 3/8” x 3-1/2”

Button Head Socket Bolt (4 pcs)

#83. 3/8” x 23mm

Curved Washer (4 pcs)

2

#91. M5 x 10mm

Screw (2 pcs)

#49. ø8

Split Washer (4 pcs)

#48. ø8 x 16mm

Flat Washer (4 pcs)

#88. M8 × P1.25 × 20L

Screw (4 pcs)

#85. Wrench

#86. Combination M5 Allen Wrench &

Phillips Head Screw Driver

Dyaco Canada Inc 2015 [e-mail] 6

1

ASSEMBLY INSTRUCTIONS

PRE-ASSEMBLY

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the
dotted Line. Lift Box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or missing parts.
If damaged parts are found, or parts are missing, contact your dealer immediately.

3. Locate the hardware package. Remove the tools first. Remove the hardwarefor
each step as needed to avoid confusion. The numbers in the instructions that are in
parenthesis (#) are the item number from the assembly drawing for reference.

STABILIZER TUBES HARDWARE STEP 1

1. Install the front and rear stabilizers with four Button Head Socket Bolts (81), four

Curved Washers (83) and four Nuts (82). The front and rear stabilizer are different.
Be sure to assemble the stabilizer with the wheels onto the front of the bike. Tighten
the hardware using the wrench provided.

#82. 3/8” Nut (4 pcs)
#81. 3/8” x 3-1/2”

Button Head Socket
Bolt (4 pcs)
#83. 3/8” x 23mm
Curved Washer
(4 pcs)

Dyaco Canada Inc 2015 [e-mail] 7

2

3

REAR STABILIZER COVER HARDWARE STEP 2

1. Install the rear stabilizer cover with two Phillips Head Screws (91). Tighten using the
Combination M5 Allen Wrench & Phillips Head Screw Driver (86).

HANDLEBAR HARDWARE STEP 3

1. Install the handlebars with four Button Head Socket Bolts (88), Split Washers (49)

and Flat Washers (48). Tighten the bolts securely using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (86).

#91. M5 x 10mm
Screw (2 pcs)

#49. ø8 Split
Washer (4 pcs)
#48. ø8 x 16mm
Flat Washer (4 pcs)
#88. M8 × P1.25 × 20L
Button Head Socket
Bolts (4 pcs)