Sole S77-2011 Owner’s Manual

FITNESS

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL

TABLEOF T T$

Product Registration

Important Safety Instructions

Important Electrical Information

Important Operation Instructions

Assembly instructions

Folding Instructions

Transport Instructions

.Operation of Your New Treadmill

Proarammable Features

General Maintenance

Service Checklist - Diagnosis Guide

Manufacturer's Limited Warranty

FITNESS

CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE FAMILW

Thank you for your purchase of this quality treadmill from SOLE. Your new treadmill has been

manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. SOLE will do all we can to make your ownership

experience as pleasant as possible for many years to come.

If you have any questions about your new product or questions about the warranty contact SOLE Fitness at 1=866=780=SOLE (7653). If you have a technical problem with your new treadmill contact

SOLE technical service at 866=MYSOLE1 (697=6531).

Please take a moment at this time to record below the name of the dealer, their telephone number,

and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE and we will always remember that you are the reason that we are in business. Please complete and mail

your registration card today and enjoy your new treadmill.

Yours in Health, SOLE Fitness

Name of Dealer

Telephone Number of Dealer

Purchase Date

PRODUCT IST TI

RECORD YOUR SERIAL NUMBER Please record the Serial Number of this fitness

product in the space provided below.

Serial Number

The self-addressed product registration card must be completed in full and returned to SOLE. You can also go to www.soletreadmills.com under the support tab to register online.

$77_20120123

1 $77 TREADMILL

IMPORTANT TYI ST UCT

WARNING - Read all instructions before using this appliance.

DANGER -To reduce the risk of electric shock disconnect your SOLE treadmill from the electrical outlet prior to cleaning and/or service work.

WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a fiat level surface with access to a 11 O-volt, 15-amp grounded outlet with only the treadmill plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING

IMPROPER ADAPTERS, OR IN ANYWAY MODIFY THE CORD SET.

A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 4.

[] Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet

and treadmill may result.

[] Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between

the rear of the treadmill and any fixed object.

[] Keep children away from the treadmill.There are obvious pinch points and other caution

areas that can cause harm.

[] Keep hands away from all moving parts.

[] Never operate the treadmill if it has a damaged cord or plug. lfthetreadmill is not working

properly, call your dealer.

[] Keep the cord away from heated surfaces.

[] Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

[] Never drop or insert any object into any openings.

[] Do not use outdoors.

[] To disconnect, turn all controls to the off position, remove tether cord, then remove the plug

from the outlet.

[] Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

[] The pulse sensors are not medical devices.Various factors, including the user's movement,

may affect the accuracy of heart rate readings.The pulse sensors are intended only as

exercise aids in determining heart rate trends in general. [] Use handrails provided; they are for your safety. [] Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS =THINK SAFETY!

$77 TREADMILL 2

IMPORTANTELECTCALl STUCTI

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any ap- pliance with a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.

NEVER remove any cover without first disconnecting AC power.

If voltage varies by ten percent (10%) or more, the performance of your treadmill may be af-

fected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. NEVER expose this treadmill to rain or moisture.This product is NOT designed for use outdoors,

near a pool or spa, or in any other high humidity environment.The maximum operating temperature specification is 40 degrees c, and humidity is 95% non-condensing

(no water drops forming on surfaces). Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur when a treadmill is first turned on or even during use. If your treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the circuit breaker on

the treadmill itself does not trip, you will need to replace the home breaker with a high inrush type.This is not a warranty defect.This is a condition we as a manufacture have no ability to

control.This part is available through most electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.com part # Q012OHM.

GROUNDINGI ST T

This product must be grounded. If the treadmill should malfunction or breakdown, ground- ing provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug.The plug must be

plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER = Improper connection of the equipment=grounding conductor can result in a risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 1lO-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below

may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded

outlet is not available.The temporary adapter should be used only until a properly grounded outlet, (shown below) can be installed by a qualified electrician.The green colored rigid ear-

lug, or the like, extending

from the adapter, must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is

used, it must be held in

place by a metal screw.

G_ound_ Outlet

Grounding Pin

G_ounded Outlet Box

Adapter

......"'"Metal Screw Ground ng

Tab of

Screw

3 $77 TREADMILL

IMPORTANT TI I T CTI

[] NEVER operate this treadmill without reading and completely understanding the results of

any operational change you request from the computer. m Understand that changes in speed and incline do not occur immediately. Set your desired

speed on the computer console and release the adjustment key.The computer will obey the

command gradually. [] NEVER use your treadmill during an electrical storm. Surges may occur in your household

power supply that could damage treadmill components. Unplug the treadmill during an

electrical storm as a precaution. m Use caution while participating in other activities while walking on your treadmill; such as

watching television, reading, etc.These distractions may cause you to lose balance or stray

from walking in the center of the belt; which may result in serious injury. m NEVER mount or dismount the treadmill while the belt is moving. SOLE treadmills start at a

very low speed and it is unnecessary to straddle the belt during start up. Simply standing on

the belt during slow acceleration is proper after you have learned to operate the unit. [] Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

[] Do not use excessive pressure on console control keys.They are precision set to function

properly with little finger pressure. Pushing harder is not going to make the unit go faster

or slower. If you feel the buttons are not functioning properly with normal pressure contact

your SOLE dealer.

IMPORTANT TYI ST UCT

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

Use:

Place the magnet into position on the red oval portion of the console control head.Your

treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

Fasten the plastic clip onto your clothing securely to assure good holding power. Note:

The magnet has strong enough power to minimize accidental, unexpected stopping.The clip should be attached securely to make certain it does not come off. Be familiar with its

function and limitations.The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled offthe console. Use the red Stop / Pause switch

in normal operation.

S77 TREADMILL 4

PREVENTATIVE T T

Vacuum Under

Motor Cover &

Check Wiring

(Every Other

Month)

Clean & Inspect Deck

for Lubrication

(Every Other Month)

Lubricate Deck

(Every 180 hours

or sooner if dry)

Inspect Belt Tracking

(Monthly) Adjust if

necessary

Date

5 $77 TREADMILL

S77ASSEMLYPACKCHECKLIST

#100.5/16"x 3/4"

Button Head

Socket Bolt (4 pcs)

#86.3/8"x 2T

Split Washer (4 pcs)

#79. 10mm

Star Washer (6 pcs)

#86.3/8"x 2T

Split Washer (6 pcs)

Socket Bolt (6 pcs)

#91.3/8"x 1-3/4"

Button Head Socket Bolt (4 pcs)

#123.3/8" x 2"

Button Head

#90.3.5 x 12 mm

Sheet Metal Screws (4 pcs)

E__NAEESTEE7

#100.5/16"x 3/4"

Button Head Bolt (4 pcs)

$77 TREADMILL 6

#92. M5 x lOmm

Phillips Head Screw (8 pcs)

#92. M5 x 10mm

Phillips Head Screw (4 pcs)

#104. Combination M5 Allen Wrench

& Phillips Head Screw Driver

#105. M6 Allen Wrench

#18. Lubricant

7 $77 TREADMILL

$77ASSEMBLYINSTRUCTIONS

ASSEMBLYSTEP_

Remove the treadmill base frame from the carton and lay it aside on firm, level ground.

ASSEMBLYSTEP2

4 .........

Slide the console mast tube covers (99 onto 5 & 98 onto 4) onto the left and right console mast tubes. Make sure the holes face the outside on each side. Connect the lower Computer Cable (32) with the middle Computer Cable (33).

Before attaching the hardware to Step 3, make sure the cables you just connected don't

get pinched in between the steel tubing. If they do, this may cause issues that prevent

the treadmill from operating properly.

$77 TREADMILL 8

+ 22 hidden pages