SOLE F80, F83, F85 Owner's Manual
F80 / F83 / F85 TREADMILL OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL
TABLE OF CONTENTS
Product Registration
Important Safety Instructions
Important Electrical Information
Important Operation Instructions
Assembly instructions
Folding Instructions
Transport Instructions
Operation of Your New Treadmill
Programmable Features
1
2
3
4
8
12
12
13
18
General Maintenance
Service Checklist - Diagnosis Guide
Manufacturer’s Limited Warranty
Sears Warranty Page
25
28
30EXPLODED VIEW DIAGRAM/PARTS LIST F80
35EXPLODED VIEW DIAGRAM/PARTS LIST F83
40EXPLODED VIEW DIAGRAM/PARTS LIST F85
45
46
F80/F83/F85- Ver.A
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of the Sole treadmill from Maurice Pincos Canada. Your new
treadmill has been manufactured by one of the leading tness manufacturers in the world and is
backed by one of the most comprehensive warranties available. Maurice Pincos Canada will do all
we can to make your ownership experience as pleasant as possible for many years to come.
If you have any questions about your new Sole product or questions about the warranty contact
Mauricie Pincos Canada at 1-888-707-1880.
If you purchased this tness product from Sears, they will be your contact for all service needs.
To contact Sears for any service issues call 1-800-4-MY-HOME(1-800-469-4663).
Please take a moment at this time to record below the name of the dealer, their telephone number,
and the date of purchase for easy contact in the future. We appreciate your condence in SOLE
and we will always remember that you are the reason that we are in business. Please complete and
mail your registration card today and enjoy your new treadmill.
Yours in Health,
Maurice Pincos Canada
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this tness product
in the space provided below.
Serial Number
F80 / F83 / F85 TREADMILL
1
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your SOLE treadmill from the electrical
outlet prior to cleaning and/or service work.
WARNING
the treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet
and treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between
Keep children away from the treadmill. There are obvious pinch points and other caution
areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working
properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
The pulse sensors are not medical devices. Various factors, including the user’s movement,
3.
exercise aids in determining heart rate trends in general.
Use handrails provided; they are for your safety.
The pulse sensors are not intended to support the user's weight. For support when using the
treadmill and during dismounting use the side handrails.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
2
F80/F83 / F85 TREADMILL
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a large motor, the GFCI will trip often. Route the power cord away from any moving
part of the treadmill including the elevation mechanism and transport wheels.
NEVER
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low,
contact your local power company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The maximum operating
(no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents
the house circuit breaker (even though it is the proper current rating) but the circuit breaker on
the treadmill itself does not trip, you will need to replace the home breaker with a high inrush
type. This is not a warranty defect. This is a condition we as a manufacture have no ability to
control. This part is available through most electrical supply stores. Examples:
Grainger part # 1D237, or available online at www.squared.com part # QO120HM.
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
whether the product is properly grounded. Do not modify the plug provided with the
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded
outlet is not available. The temporary adapter should be used only until a properly grounded
lug, or the like, extending
from the adapter, must be
connected to a permanent
ground such as a properly
grounded outlet box cover.
Whenever the adapter is
used, it must be held in
place by a metal screw.
F80 / F83 / F85 TREADMILL
3
IMPORTANT OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey the
command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an
electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. SOLE treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
f you feel the buttons are not functioning properly with
normal pressure contact your SOLE dealer.
IMPORTANT SAFETY INSTRUCTIONS
A safety tether cord is provided with this unit. It is a simple magnetic design that should be used
at all times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement.
To Use:
1. Place the magnet into position on the red portion of the console between start and stop.
Your treadmill will not start and operate without this. Removing the magnet also secures
the treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
The magnet has strong enough power to minimize accidental, unexpected stopping. The
function and limitations. The treadmill will stop, depending on speed, with a one to two
in normal operation.
4
F83 / F85 TREADMILL
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could
cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to
grab it, but do not tilt the treadmill up to gain access to the strap end.
F80 / F83 / F85 TREADMILL
5
2
3
F80 / F83 / F85 ASSEMBLY PACK CHECKLIST
HARDWARE STEP 2
#128. Speed Nut Clips (6 pcs)
HARDWARE STEP 3
#130. 5/16” x 1/2”
Button Head Socket Bolt (8 pcs)
5
6
HARDWARE STEP 5
#113. Ø 10 mm
Split Washer (4 pcs)
HARDWARE STEP 6
#134. M5 x 10mm
Phillips Head Screw (8 pcs)
#133. 3/8” x 1-3/4”
Button Head Socket Bolt (4 pcs)
#122. 3.5 x 12 mm
Sheet Metal Screws (4 pcs)
6
F83 / F85 TREADMILL
7
8
HARDWARE STEP 7
#151. 5/16” x 3/4”
Button Head Bolt (4 pcs)
HARDWARE STEP 8
#120. 5 x 16mm
Tapping Screw (6 pcs)
#75. Safety Key
ASSEMBLY TOOLS
#131. Combination M5 Allen Wrench
& Phillips Head Screw Driver
#132. M6 Allen Wrench
#30. Lubricant
F80 / F83 / F85 TREADMILL
7
F80 / F83 / F85 ASSEMBLY INSTRUCTIONS
61
62
5
49
50
4
ASSEMBLY STEP 1
1
1. Remove the treadmill from the carton and position it on a smooth, level
belt until you have removed the plastic wrap and Styrofoam from beneath
the unit. Turning the unit on its side after removing the belt may cause
the unit fold up and cause serious injury!
2
ASSEMBLY STEP 2
128
128
128
128
128
1. Install the six Speed Nut
Clips (128) on the Frame
Base left and right side.
2. Slide the Frame Base Caps
(61 & 62) over the Upright
tubes (4 & 5). Connect the
Lower Computer Cable (49)
to the Middle Computer
Cable (50) on the right side
of the unit.
HARDWARE STEP 2
#128. Speed Nuts
Clip (6 pcs)
128
Before attaching the hardware to Step 3, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
8
F83 / F85 TREADMILL
3
130
130
130
130
131
4
ASSEMBLY STEP 3
1. Attach the Upright Tubes (4 & 5) onto the Frame Base (2) with eight Button
Head Socket Bolts (130) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (131). Do not tighten the bolts completely until
ASSEMBLY STEP 4
HARDWARE STEP 3
#130. 5/16”x 1/2” Button
Head Socket Bolts (8 pcs)
console on at the appropriate height or have someone hold the console while
you connect the cables
1. Connect the Speed Adjustment Switch Cable (54) to the Speed Cable, Upper
(37) Connect the Incline Adjustment Switch Cable (55) to the Incline Cable,
Upper (38). Connect the Computer Cable, Middle (50) and Computer Cable,
Upper (48). Tuck the excess cable into the hand rail tubing to prevent it from
getting pinched.
Before attaching the hardware to Step 5, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
F80 / F83 / F85 TREADMILL
9
5
63
65
66
67
ASSEMBLY STEP 5
1. Attach the Console Assembly (52) onto the Upright Tubes (4 & 5) and
attach with four Button Head Socket Bolts (133) and four Split Washers (113).
Tighten using the M6 Allen Wrench (132). Tighten completely.
HARDWARE STEP 5
#133. 3/8”x 1-3/4”
Button Head Socket
Bolts (4 pcs)
#113. Ø 10mm
Split Washers (4 pcs)
6
ASSEMBLY STEP 6
1. Attach the Left (63 & 65) and Right (66 & 67)Side Caps to the top of the Upright Tubes (4 & 5) with eight Phillips Head Screws (134) and four Sheet Metal
Screws (122). Tighten with the Combination M5 Allen Wrench & Phillips Head
Screw Driver (131).
HARDWARE STEP 6
#134. M5x10mm
Phillips Head
Screws (8 pcs)
#122. 3.5x12mm
Sheet Metal
Screws (4 pcs)
10
F83 / F85 TREADMILL
7
150
151
151
15
151
4
5
151
61
120
120
120
120
120
120
62
ASSEMBLY STEP 7
1. Attach the Support tube (15) between the upright tubes (4 & 5) with four
Button Head Socket Bolts (151 mly.
2. Place the Beverage Holder (150) on top of the Support tube (15) as shown in
the illustration.
3. Place the magnet of the safety key (75) in between the Start and Stop
buttons (if it isn’t already attached). The treadmill will not function without this
in place.
4. Check to make sure all bolts and screws are completely tightened.
HARDWARE STEP 7
#151. 5/16”x3/4”
Button Head Socket
Bolts (4 pcs)
#75. Safety Key
8
ASSEMBLY STEP 8
1. Attach the Console mast covers (62 & 63) to the Frame Base (2) with six
Tapping Screws (120). Tighten screws using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (131).
HARDWARE STEP 8
#120. 5x16mm
Tapping Screws (6 pcs)
F80 / F83 / F85 TREADMILL
11
FOLDING INSTRUCTIONS
Do not attempt to move the unit unless it is in the folded and locked position. Be sure the
power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to
the desired position.
TO FOLD THE TREADMILL
Make certain the treadmill is at minimum
incline. Lift the treadmill running deck
until it is secured by the locking telescoping
tube assembly in center back of base.
TO UNFOLD THE TREADMILL
Apply slight forward pressure* on the treadmill
running deck with one hand. Pull down on the
unlocking lever and slowly lower the running deck
unassisted when it reaches about waist high.
*At the rear roller area to relieve pressure on the
locking system.
TRANSPORTATION INSTRUCTIONS
The treadmill is equipped with four transport wheels that are engaged when the treadmill is
folded. After folding simply roll the treadmill away.
12
F83 / F85 TREADMILL
OPERATION OF YOUR TREADMILL
GETTING FAMILIAR WITH THE CONTROL PANEL
F80 CONSOLE
INCLINE QUICK KEYS
SPEAKER
DISPLAY BUTTON
CONTROL KEYS
AUDIO IN JACK
(MP3, CD, OR
SMARTPHONE)
COOLING FANS
SPEED QUICK KEYS
SPEAKER
FAN POWER SWITCH
DOT MATRIX DISPLAY
HEADPHONE JACK
CONTACT HEART
RATE SENSORS
F83 / 85 CONSOLE
INCLINE QUICK KEYS
SPEAKER
DISPLAY BUTTON
CONTROL KEYS
AUDIO IN JACK
(MP3, CD, OR
SMARTPHONE)
COOLING FANS
SPEED QUICK KEYS
SPEAKER
FAN POWER SWITCH
DOT MATRIX DISPLAY
HEADPHONE JACK
CONTACT HEART
RATE SENSORS
F80 / F83 / F85 TREADMILL
13
Loading...