Sole F60-2013 Owner’s Manual

TABLEOF T T$
Product Registration 1
ImDortant Safety Instruction_ 2
IB_portant Electrical Information 3
Important Operation Instructions 4
Assembly instructions 8
Folding Instructions 11
Transport Instructions 11
.Operation of Your New Treadmill 12
Programmable Features 16
Using Heart Rate Transmitter 21
General Maintenance 23
Manufacturer's Limited Warrant_ 28
i i iii}i iiii: iiiiiiiii/l!
FITNESS
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase ofthB quality treadmill from SOLE. Your new treadmill has been
manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. SOLE will do all we can to make your ownership experience as pleasant as possible for many years to come.
If you have any questions about your new product or questions about the warranty contact SOLE Fitness at
1-866-780-SOLE {7653). If you have a technical problem with your new treadmill contact SOLE technical
service at 866-MYSOLEI (I-866-697-6531).
If you purchased this fitness product from Sears,they will be your contact for all service needs. Please see the last page in this manual for detailed information about Sears service.To contact Sears for any service issues
call 1-800-4-MY-HOME(I-800-469-4663).
Please take a moment at this time to record below the name of the dealer, their telephone number, and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE and we will always
remember that you are the reason that we are in business. Please complete and mail your registration card today and enjoy your new treadmill.
Yours in Health, SOLE Fitness
Telephone Number of Dealer Purchase Date
PRODUCT IST TI
RECORD YOUR SERIAL NUMBER Please record the Serial Number of this fitness
product in the space provided below.
Serial Number
REGISTER YOUR PURCHASE The self-addressed product registration card must be completed in full and returned to SOLE.
You can also go to wwwosoletreadmi#socom under the support tab to register online.
F60_20121224
I F60 TREADMILL
IMPORTANT TYI UCTI
WARNING - Read all instructions before using this appliance.
DANGER -To reduce the risk of electric shock disconnect your SOLE treadmill from the electrical outlet prior to cleaning and/or service work.
WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons, install
the treadmill on a fiat level surface with access to a 11 O-volt, 15-amp grounded outlet with only the treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANYWAY MODIFY THE CORD SET.
A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 3.
[] Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet
and treadmill may result.
[] Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between
the rear of the treadmill and any fixed object.
[] Keep children away from the treadmill.There are obvious pinch points and other caution
areas that can cause harm.
[] Keep hands away from all moving parts. [] Never operate the treadmill if it has a damaged cord or plug. lfthetreadmill is not working
properly, call your dealer.
[] Keep the cord away from heated surfaces. [] Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
[] Never drop or insert any object into any openings. [] Do not use outdoors.
[] To disconnect, turn all controls to the off position, remove tether cord, then remove the plug
from the outlet.
[] Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
[] The pulse sensors are not medical devices.Various factors, including the user's movement,
may affect the accuracy of heart rate readings.The pulse sensors are intended only as exercise aids in determining heart rate trends in general.
[] Use handrails provided; they are for your safety. [] Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS =THINK SAFETY!
F60 TREADMILL 2
IMPORTANTELECTCALl T UCTi
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any ap- pliance with a large motor, the GFCI will trip often. Route the power cord away from any moving
part of the treadmill including the elevation mechanism and transport wheels. NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be af- fected. Such conditions are not covered under your warranty. If you suspect the voltage is low,
contact your local power company or a licensed electrician for proper testing. NEVER expose this treadmill to rain or moisture.This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment.The maximum operating
temperature specification is 40 degrees C, and humidity is 95% non-condensing (no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur when a treadmill is first turned on or even during use. If your treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the fuse on the
treadmill itself does not trip, you will need to replace the home breaker with a high inrush type. This is not a warranty defect.This is a condition we as a manufacture have no ability to control.
This part is available through most electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.com part # QO12OHM.
GROUNDINGI T
This product must be grounded. If the treadmill should malfunction or breakdown, ground- ing provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug.The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER = Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 11O-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available.The temporary adapter should be used only until a properly grounded
outlet, (shown below) can be installed by a qualified electrician.The green colored rigid ear- lug, or the like, extending
from the adapter, must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in
place by a metal screw.
Grounded Outlet
Grounding Pin
\ \,/
Grounded Outlet Box
Adapter
"_'Metal Sorew Grounding
-'" Tab of
Screw
3 F60 TREADMILL
IMPORTANT TI T CTI
II NEVER operate this treadmill without reading and completely understanding the results of
any operational change you request from the computer.
II Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key.The computer will obey the command gradually.
II NEVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an electrical storm as a precaution.
II Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc.These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.
II NEVER mount or dismount the treadmill while the belt is moving. SOLE treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.
II Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.). II Do not use excessive pressure on console control keys.They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure contact
your SOLE dealer.
IMPORTANT TYI UCTI
A safety tether cord is provided with this unit and should be used at all times. It is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop
tread-belt movement.
To Use:
1. Place the safety key into position on the console control head.Your treadmill will not start and operate without this. Removing the safety key also secures the treadmill from unau-
thorized use.
.
Fasten the plastic clip onto your clothing securely to assure good holding power.
Note: The clip should be attached securely to make certain it does not come off. Be familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to
two step coast anytime the safety key is pulled off the console. Use the red Stop switch in normal operation.
F60 TREADMILL 4
IMPORTANT TYI ST UCTI
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the treadmill is positioned fiat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap.This could cause the treadmill's folding mechanism to spring open. If the end of the Velcro strap (that you need to grab to remove it) happens to be under the treadmill deck, reach under the deck to
grab it, but do not tilt the treadmill up to gain access to the strap end.
PREVENTATIVE T CEC T
Vacuum Under
Motor Cover &
Check Wiring
(Every Other
Month)
Clean & Inspect Deck
for Lubrication
(Every Other Month)
Lubricate Deck
(Every 90 hours
or sooner if dry)
Inspect Belt Tracking
(Monthly) Adjust if
necessary
Date
5 F60 TREADMILL
ASSEMBLYPACKCHECKLIST
#76.05/16"x O18mm x 1.ST
Flat Washer (8 pcs)
#95. M5 x 15mm
Button Head Socket Bolt (6 pcs)
©
#97.5/16"x 1/2"
Hex Head Bolt (8 pcs)
#93.010
Split Washer (4 pcs)
#96.5/16"x 3/4"
Button Head Socket Bolt (4 pcs)
F60 TREADMILL 6
#94.3/8"x l-l/2"
Button Head Socket Bolt (4 pcs)
ASSEMBLYTOOLS
#98. Combination M5 Allen Wrench
& Phillips Head Screw Driver
#100. 13mm Wrench
#99. M6 L Allen Wrench
7 F60 TREADMILL
ASSEMLYINSTRUCTIONS
1.
Remove the treadmill from the carton and position it aside on a smooth, level floor.The rear should be at least 3'from any wall. Do not remove the Velcro belt until you have removed the plastic wrap and Styrofoam from beneath the unit. Turning the unit on its side after removing the belt may cause the unit fold up and cause serious injury?
i
97
76
4
\
97
#76. _)5/16"x _)18mm x
1.5TFlatWasher (8 pcs)
#97.5/16"x 1/2"
Hex Head Bolt (8 pcs)
44
97 5 43 _6
97
1.
Connect Computer Cable (Upper/Lower) (44) with Computer Cable (Middle) (43) then insert Right and Left Uprights (4) and (5) into the Frame Base (2) and use the Wrench (100) to tighten eight Hex Head Bolts (97) and eight Flat
Washers (76).
Before attaching the hardware to Step 3, make sure the cables you just connected don't
get pinched in between the steel tubing. If they do, this may cause issues that prevent the treadmill from operating properly.
F60 TREADMILL 8
Loading...
+ 22 hidden pages