Sole E95-2011, E55-2011 Owner’s Manual

FITNESS

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ELLIPTICAL

TABLEOF T TS

Product Registration

Important Safety Instructions

Important Electrical Information

Important Operation Instructions

Transport Instructions

E55 Assembly Instructions

E95 Assembly Instructions

Elliptical Features

Operation of Your New Elliptical

Programmable Features

Using Heart Rate Monitor

General Maintenance

Manufacturer's Limited Warranty

ATTENTION

THIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE ONLY AND ISWARRANTED FORTHE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.

FmTNE$$

CONGRATULATION5 ON YOUR NEW ELLIPTICAL AND WELCOME TO THE 50LE FAMILW

Thank you for your purchase of this quality elliptical trainer from SOLE. Your new elliptical has been

manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. SOLE will do all we can to make your ownership

experience as pleasant as possible for many years to come.

If you have any questions about your new product or questions about the warranty contact SOLE Fitness at 1-866-780-SOLE {7653). If you have a technical problem with your new elliptical contact

SOLE technical service at 866-MYSOLE1 (697-6531).

Please take a moment at this time to record below the name of the dealer, their telephone number, and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE and we will always remember that you are the reason that we are in business. Please complete and mail

your registration card today and enjoy your new elliptical.

Yours in Health, SOLE Fitness

Name of Dealer

Telephone Number of Dealer

PRODUCT ST

RECORD YOUR SERIAL NUMBER Please record the Serial Number of this fitness product

in the space provided below.

Serial Number

The self-addressed product registration card must be completed in full and returned to SOLE. You can also go to www.soleellipticals.com under the support tab to register online.

E55_E95_20111027

ES5 / E95 ELLIPTICAL

IMPORTANT TYI ST UCT

I/I/ARNI/VG - Read all instructions before using this appliance.

DANGER -To reduce the risk of electric shock disconnect your SOLE elliptical from the electrical outlet prior to cleaning and/or service work.

WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons, install the elliptical on a fiat level surface with access to a 110-volt, 15-amp grounded outlet with only the elliptical plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING

IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.

A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 4.

[] Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet

and elliptical may result.

[] Keep children away from the elliptical.There are obvious pinch points and other caution

areas that can cause harm.

[] Keep hands away from all moving parts.

[] Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working

properly, call your dealer.

[] Keep the cord away from heated surfaces.

[] Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

[] Never drop or insert any object into any openings.

[] Do not use outdoors.

[] To disconnect, turn all controls to the off position, remove tether cord, then remove the plug

from the outlet.

[] Do not attempt to use your elliptical for any purpose other than for the purpose it is

intended.

[] The hand pulse sensors are not medical devices.Various factors, including the user's move-

ment, may affect the accuracy of heart rate readings.The pulse sensors are intended only as

exercise aids in determining heart rate trends in general.

[] Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.

SAVE THESE INSTRUCTIONS =THINK SAFETY!

E55 / E95 ELLIPTICAL 2

IMPORTANTELECTCALl UCTI

WARNING!

NEVER remove any cover without first disconnecting AC power.

If voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is

low, contact your local power company or a licensed electrician for proper testing. NEVER expose this elliptical to rain or moisture.This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment.The operating temperature

specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).

GROUNDINGINSTRUCTIONS

This product must be grounded. If the elliptical should malfunction or breakdown, ground- ing provides a path of least resistance for electric current, reducing the risk of electric shock.

This product is equipped with a cord having an equipment-grounding plug.The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with

all local codes and ordinances.

DANGER =Improper connection of the equipment=grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 1lO-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below

may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available.The temporary adapter should be used only until a properly grounded

outlet, (shown below) can be installed by a qualified electrician.The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a

metal screw.

Grounded Out_et

/,/

Grounding Pin

Tab of

........'-Metal Screw Grounding

Screw

Grounded Outlet Box

3 E55 / E95 ELLIPTICAL

IMPORTANTOPERATIONINSTRUCTIONS

[] NEVER operate this elliptical without reading and completely understanding the results of

any operational change you request from the computer.

[] Understand that changes in speed and incline do not occur immediately. Set yOUr desired

speed on the computer console and release the adjustment key.The computer will obey the command gradually.

[] NEVER use yOUr elliptical during an electrical storm. Surges may occur in yOUr household

power supply that could damage elliptical components. Unplug the elliptical during an elec-

trical storm as a precaution.

[] Use caution while participating in other activities while walking on yOUr elliptical; such as

watching television, reading, etc.These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.

[] Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

[] Do not use excessive pressure on console control keys.They are precision set to function

properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure contact

yOUr SOLE dealer.

POWER CONNECTOR - FRONT, LEFT SIDE OF UNIT

TRANSPORTI ST T

The elliptical is equippped with two transport wheels which are engaged when the Fear of the elliptical is lifted.

E55 / E95 ELLIPTICAL 4

/ ASSEM

LYPACKCHECKLIST

#164. 3/8" x 19 x 1.ST

Flat Washer (2 pcs)

#180.3/8"x 2T

Split Washer (1 pc)

#182.5/16"x 1.5T

Split Washer (4 pcs)

#170.5/16"x 20 x 1.5T

Flat Washer (4 pcs)

#141. M5 x lOmm

Phillips Head Screw (4 pcs)

#183.5/16"

Star Washer (4 pcs)

#181.3/8"x 23 x 2T

Curved Washer (2 pcs)

#157.3/8" x 7T

Nylon Nut (2 pcs)

#132.3/8"x 3/4"

Hex Head Bolt (2 pcs)

#13,5.5/16"x 2-1/4"

Hex Head Bolt (4 pcs)

#125.3/8"x 2-1/4"

Hex Head Bolt (1 pcs)

#133.3/8"x 1-1/2"

Hex Head Bolt (2 pcs)

5 E55 / E95 ELLIPTICAL

#175.25mm

WaveWasher(4pcs)

#165.3/8"x 30mm

FlatWasher(2pcs)

#75.Grommet

(2pcs)

#142.3.5x 12mm

SheetMetalScrew(8 pcs)

#170.5/16"x 20x 1.5T

FlatWasher(2pcs)

#132. 3/8"x 3/4"

HexHeadBolt(2pcs)

#159.5/16"x 7T

NylonNut(2pcs)

#134.5/16"x 1-1/4"

HexHeadBolt(2pcs)

#142.3.5x 12mm

SheetMetalScrew(10pcs)

E55 / E95 ELLIPTICAL 6

#139.M5x 15mm

PhillipsHeadScrew(29pcs)

Bracket (2 pcs) _

#145. M6 x 10mm

Phillips Head Screw (4 pcs)

#186.PhillipsHeadScrewdriver #185.ShortPhillipsHeadScrewdriver

#187.12/14mm Wrench #184. 13/14mmWrench

ASSEMBLYINSTRUCTIONS

PRE-ASSEMBLY

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift Box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are missing, contact your dealer immediately.

3. Locate the hardware package. Remove the tools first. Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item number from the assembly drawing

for reference.

7 E55 / E95 ELLIPTICAL

+ 19 hidden pages