Sole E95-2010, E55-2010 Owner’s Manual

FITNESS

0 WNER 'S MAN UAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

OPERA TING YOUR NEW ELLIPTICAL!

Product Registration ...................................................................................... 2

Important Safety Instructions ........................................................................... 3

Important Electrical Information ........................................................................ 4

Important Operation Instructions ....................................................................... 4

Assembly Instructions ..................................................................................... 5

Features ...................................................................................................... 14

Operation of Your New E55 Elliptical ............................................................... 15

Operation of Your New E95 Elliptical ............................................................... 22

Heart rate training information ......................................................................... 30

Maintenance ................................................................................................ 33

Manufacturer's Limited Warranty ...................................................................... 34

ATTENTION-THIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THAT APPLICA TION. ANY OTHER APPLICATION

VOIDS THIS WARRANTY IN ITS ENTIRETY.

1 E55 / E95 Elliptical

CONGRATULATIONS ON YOUR

NEW ELLIPTICAL AND WEL COME

TO THE SOLE FAMILW

Thank you for your purchase of this quality elliptical trainer from SOLE. Your new elliptical has been manufactured by one of the leading fitness manufacturers in the world

and is backed by one of the most comprehensive warranties available. SOLE will do all we can to make your ownership experience as pleasant as possible for many years to

come.

If you have any questions about your new product or questions about the warranty contact SOLE Fitness at 1-866-780-SOLE (7653). If you have a technical problem with your new elliptical contact SOLE technical service at 866-MYSOLE1 (697-6531)

Please take a moment at this time to record below the name of the dealer, their

telephone number, and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE and we will always remember that you are the

reason that we are in business. Please complete and mail your registration card today

and enjoy your new elliptical.

Yours in Health,

SOLE Fitness

Name of Dealer

Telephone Number of Dealer

Purchase Date

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number

The self-addressed product registration card must be completed in full and returned to SOLE. You can also go to www.soletreadmills.com under the support tab to register online.

E55 / E95 2009 ver. B

2 E55 / E95 Elliptical

DANGER - To reduce the risk of electric shock disconnect your elliptical from the electrical outlet prior to cleaning and/or service work.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the

elliptical on a flat level surface with access to a nominal 110-volt, 15-amp grounded outlet

with only the elliptical plugged into the circuit..

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY

USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET. A serious shock or fire hazard may result along with computer malfunctions. See Grounding

Instructions, page 4.

• Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both the carpet and elliptical may result.

Keep children away from the elliptical. There are obvious pinch points, moving parts

and other caution areas that can cause harm.

• Keep hands away from all moving parts.

• Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working

properly, call your dealer.

• Keep the cord away from heated surfaces.

• Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor could ignite a highly gaseous environment

• Never drop or insert any object into any openings.

• Do not use outdoors.

• To disconnect, turn all controls to the off position, then remove the plug from the outlet.

• Do not attempt to use your elliptical for any purpose other than for the purpose it is

intended.

• The hand pulse sensors are not medical devices. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

• Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.

WARNING!

• NEVER remove any cover without first disconnecting AC power supply.

• If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be

affected. Such conditions are not covered under your warranty. If you suspect the voltage is

low, contact your local power company or a licensed electrician for proper testing.

• NEVER expose this elliptical to rain or moisture. This product is NOT designed for Use outdoors, near a pool or spa, or in any other high humidity environment. The operating

temperature specification is 40 to 120 degrees Fahrenheit and humidity limit is 95%,

non-condensing (no water drops forming on surfaces).

3 E55 / E95 Elliptical

• NEVER operate this elliptical without reading and completely understanding the results of any operational change you request from the computer.

• Understand that changes in resistance do not occur immediately. Set your desired level on the

computer console and release the adjustment key. The computer will obey the command gradually.

• NEVER use your elliptical during an electrical storm. Surges may occur in your household

power supply that could damage elliptical components. Unplug the elliptical during an electrical storm as a precaution.

• Use caution while participating in other activities while using your elliptical such as watching television, reading, etc. These distractions may cause you to lose balance, and that may result in serious injury.

• Always hold on to a handrail or hand bar while making control changes.

Do not use excessive pressure on console control keys. They are precision set to properly function with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure, contact your Spirit dealer.

This product must be grounded. If the electrical system of the elliptical should malfunction or

breakdown grounding provides a path of least resistance for electric current; reducing the risk of

electric shock. This product is equipped with a cord having an equipment-grounding plug. The

plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt

as to whether the product is properly grounded. Do not modify the plug provided with the

product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the

plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is

not available. The temporary adapter should be used only until a properly grounded outlet, (shown below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly

grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Grounded Outlet

Ada

Grounding Pin

Grounded Outlet Box

Screw

Tab of

Grounding

Screw

E55 / E95 Elliptical

#164.3/8" x 19 x 1.5T

Flat Washer (2pcs)

#180.3/8" Split Washer (1pc)

#182.5/16" Split Washer (4pcs)

#170.5/16"x 20 x 1.5T

Flat Washer (4pcs)

#141. M5 x 10 mm

Phillips Head Screw (4pcs)

#183.5/16"

Star Washer (4pcs)

#181.3/8" x 23 x 2T

Curved Washer (2pcs)

#157.3/8" x 7T

Nylon Nut (2pcs)

#132.3/8" x 3/4"

Hex Head Bolt (2pcs)

#135.5/16" x 2-1/4"

Hex Head Bolt (4pcs)

#125.3/8" x 2-1/4"

Hex Head Bolt (1pc)

#133.3/8" x 1-1/2"

Hex Head Bolt (2pcs)

E55 / E95 Elliptical

#175.25 mm Wave Washer (2pcs)

#165.3/8" x 30mm

Flat Washer (2pcs)

#142.3.5 x 12 mm Sheet Metal Screw (8pcs)

#170.5/16"x 20 mm

Flat Washer (2pcs)

#159.5/16" x 7T

Nylon Nut (2pcs)

#132.3/8" x 3/4"

Hex Head Bolt (2pcs)

#134.5/6" x 1-1/4"

Hex Head Bolt (2pcs)

#142.3.5 x 12mm

Sheet Metal Screw (8pcs)

#139. M5 x 15 mm

Phillips Head Screw (24pcs)

6 E55 / E95 Elliptical

#145. M6 x 10 mm

Phillips Head Screw (4pcs)

#186. Phillips Screw Driver (1 pc) #185. Short Phillips Screw Driver (1pc)

#187.12 / 14 mm Wrench (1pc)

#184. 13 / 14 mm Wrench

7 E55 / E95 Elliptical

• UNPACKING THE UNIT

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift Box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are missing, contact your dealer immediately.

3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that are in

parenthesis (#) are the item number from the assembly drawing, for reference.

STEP 1: Incline Rail Assembly and Console Mast

Install the Incline Rail Assembly (2) into the U-channel bracket of the Main Frame (1). Secure

with the six bolts & associated hardware as follows: From the sides install two 3/8"x1-1/2" Hex

Head Bolts (133)with two 3/8"x19mm Flat Washers (164) and two 3/8"x7T Nylon Nuts (157).

From the top install four 5/16"x2-1/4" Hex Head Bolts (135), four 5/16" Split Washers (182), four 5/16"x20 Flat Washers (170), and four 5/16" Star Washers (183), as shown in figure 1, and tighten with the 13/14 mm Wrench (184) and 12/14mm Wrench (187).

Connect the three Incline Motor Power lines by matching the Red, White and Black color codes of the wires (48) and the 3-pin position Sensor Connector (49). Locate the Console

Mast (12) and Console Mast Cover (96) and slide the Cover onto the Mast as far as it will go.

Make sure the Console Mast Cover is facing the correct way. At the top opening of the Main

Frame of the elliptical is a Computer Cable (50). Unravel and straighten out the cable and feed

it into the bottom of the console mast tube and out of the top opening. Install the Console Mast

(12) into the receiving bracket on the top of the Main Frame (1). Pull slightly on the computer cable at the top of the mast while installing. This will ensure the cable does not get pinched

and shorted during console mast assembly.

Put one 3/8" x 2T Split Washer (180) onto the 3/8" x 2-1/4" Long Hex Head Bolt (125) and

install through the left side of the receiving bracket into the Console Mast (12). Put the two 3/8" x 23 Curved Washers (181) onto the two 3/8" x 3/4" Short Hex Head Bolts (132) and install

through the front of the console mast. Using the 13/14m/m Wrench, tighten the three bolts, and the fourth bolt, which is pre-installed, firmly. These bolts should be tightened as much as you possibly can.

Plug all of the connectors into the back of the console; Computer Cable (50), two Hand pulse Cables (57), Resistance switch wire (60) and Incline switch wire (61). Secure the Console (45)

on the console mounting plate with four M5xl0m/m Phillips Head Screws (144).

8 E55 / E95 Elliptical

12J_i

---1

155

i \

182

_>_o....

9 E55 / E95 Elliptical

STEP 2: Handlebar Assembly

1. Install the two 25m/m Wave Washers (175) onto the Left and Right side of the Handle Bar axle.

2. Slide the Left (10) and Right (11) Handle Bars onto the appropriate side of the axle. The handlebars have a small sticker on them indicating L (left) and R (right).

3. Install two 3/8 X 30mm Flat Washers (165) onto the two 3/8" X 3/4" Hex Head Bolts (132) and install, and tighten, in the threaded holes in the ends of the axle.

4. Connect the two wires (Left-61 to 63 & Right-60 to 62) on the L&R sides together and store the

excess wire, including plastic connectors, back inside the console mast. Place the rubber grommets (75) over the wire and snap it into the hole in the console mast. Install the Front

Handle Bar Covers (105 left, 107 right) and Rear Handle Bar Covers (106 left, 108 right) over

the Handle Bar axle connections and secure with the eight 3.5xl0m/m Sheet Metal Screws

(142).

I/ /

142 106 // ,/

107

165

1,52

11 ', 'i

i i

J i

10 E55 / E95 Elliptical

+ 24 hidden pages