SOLE 16008600630 Owner's Manual
OWNER’S MANUAL
Model:16008600630
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW TREADMILL!
TABLE OF CONTENTS
Product Registration.............………………..…….........………………………………………………..1
Important Safety Instructions...................................................................................2
Important Electrical Information...............................................................................3
Important Operation Instructions..............................................................................4
Assembly Pack Checklist............................................................................................6
Assembly Instructions................................................................................................8
Folding Instructions..................................................................................................12
Operation of Your Treadmill.....................................................................................13
Bluetooth® Connectivity...........................................................................................17
Programmable Features...........................................................................................18
General Maintenance................................................................................................25
Service Checklist - Diagnosis Guide...........................................................................28
Exploded View Diagram.............................................................................................30
Parts List.....................................................................................................................31
Manufacturer’s Limited Warranty………………………………………………...…........ ..............36
Customer Service 1-888-707-1880 1 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality treadmill from Dyaco Canada Inc. Your new treadmill has been
manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most
comprehensive warranties available. Dyaco Canada Inc. will do all we can to make your ownership experience
as pleasant as possible for many years to come.
If you have any questions about your new Sole product or questions about the warranty contact Dyaco Canada
Inc. at 1-888-707-1880.
Please take a moment at this time to record below the name of the dealer, their telephone number and the
date of purchase for easy contact in the future. We appreciate your confidence in SOLE and we will always
remember that you are the reason that we are in business. Please complete and mail your registration card
today and enjoy your new treadmill.
Yours in Health,
Dyaco Canada Inc.
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness
product in the space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to Dyaco Canada Inc. You
can also go to www.solefitness.ca to register online.
Customer Service 1-888-707-1880 2 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
IMPORTANT
SAFETY INSTRUCTIONS
WARNING
- Read all instructions before using this appliance.
DANGER
- To reduce the risk of electric shock disconnect your treadmill from the electrical
outlet prior to cleaning and/or service work.
WARNING
- To reduce the risk of burns, fire, electric shock, or injury to persons, install the
treadmill on a flat level surface with access to a 110-volt, 15-amp grounded outlet with only the
treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET .
A serious shock or fire hazard may result along with computer malfunctions. See Grounding
Instructions, page 3.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet
and treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between
the rear of the treadmill and any fixed object.
Keep children under the age of 13 away from the treadmill. There are obvious pinch points
and other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working
properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, then remove the plug from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Their purpose is to provide you with an
approximate measurement in relation to your target heart rate. Use of a chest transmitter
strap is a much more accurate method of heart rate analysis. Various factors, including the
user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Use handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
This applicance is not intended for use by persons with reduced reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsable for their
safety
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Customer Service 1-888-707-1880 3 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
IMPORTANT
ELECTRIC AL INFORMATION
WARNING
!
NEVER
use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any
appliance with a large motor, the GFCI will trip often. Route the power cord away from any
moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER
remove any cover without first disconnecting AC power. If voltage varies by ten percent
(10%) or more, the performance of your treadmill may be affected. Such conditions are not
covered under your warranty. If you suspect the voltage is low, contact your local power
company or a licensed electrician for proper testing.
NEVER
expose this treadmill to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The maximum
operating temperature specification is 40 degrees c, and humidity is 95% non-condensing
(no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents,
(ARC fault breakers are one example) that can occur when a treadmill is first turned on or
even during use. If your treadmill is tripping the house circuit breaker (even though it is the
proper current rating) but the circuit breaker on the treadmill itself does not trip, you will
need to replace the home breaker with a high inrush type. This is not a warranty defect. This
is a condition we as a manufacture have no ability to control. This part is available through
most electrical supply stores. Examples: Grainger part # 1D237, or available online at
www.squared.com part # QO120HM.
GROUNDING
INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product if it will not
fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded
outlet is not available. The temporary
adapter should be used only until a
properly grounded outlet, (shown
below) can be installed by a qualified
electrician. The green colored rigid
ear-lug, or the like, extending from the
adapter, must be connected to a
permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal
screw.
Customer Service 1-888-707-1880 4 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
IMP ORTANT
OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the results
of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediatel y. Set your desired
work level on the computer console and release the adjustment key. The computer will obey
the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an
electrical storm as a precaution.
Use caution while participating in other activities while walking on your t readmill; such as
watching television, reading, etc. These distractions may cause you to lose balance which
may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. SOLE treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to opérate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure.
SAFETY
TETHER CORD
A safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the t read-belt.
Pulling this safety tether cord will stop tread-belt movement. To Use:
1. Place the magnet into position on the round metal portion of the console control head. Your
treadmill will not start and operate without this. Removing the magnet also secu res the
treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The
magnet has strong enough power to minimize accidental, unexpected stopping. The clip
should be attached securely to make certain it does not come off. Be familiar with its
function and limitations. The treadmill will stop, depending on speed, with a one to two step
coast anytime the magnet is pulled off the console. Use the Stop / Pause switch in normal
operation.
Customer Service 1-888-707-1880 5 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
IMPORTANT
SAFETY INSTRUCTIONS
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not re moved properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could
cause the treadmill’s folding mechanism to spring open. If the end of the Velcr o strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to grab
it, but do not tilt the treadmill up to gain access to the strap end.
PREVENTATIVE
MAINTENANCE CHART
Vacuum Under
Motor
Cover&Check
Wiring (Every
Other Month)
Clean&Inspect
Deck for
Lubrication
(Every Other
Month)
Lubricate Deck
(Every 90 hours
or sooner if dry)
Inspect Belt
Tracking(Monthly)Adjust
if necessary
Date
Customer Service 1-888-707-1880 6 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
ASSEMBLY
PACK CHECKLIST
HARDWARE STEP 2
HARDWARE STEP 3
HARDWARE STEP 5
HARDWARE STEP 6
2
#128.M5
Speed Nuts Clip (6 pcs)
3
#130. 5/16" × 1/2"
Button Head Socket Bolt (8 pcs)
5
#113. Ø10 × 2T
Split Washer (4 pcs)
6
#175. 3.5 × 16mm
Sheet Metal Screws (6 pcs)
#139. 3/8" × 1-3/4"
Button Head Socket Bolt (4 pcs)
Customer Service 1-888-707-1880 7 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
HARDWARE STEP 7
HARDWARE STEP 8
ASSEMBLY
TOOLS
8
#120. 5 × 16mm
Tapping Screw (6 pcs)
7
#159. 5/16" × 3/4"
Button Head Socket Bolt (4 pcs)
#75. Safety Key
#131. Combination M5 Allen Wrench
& Phillips Head Screwdriver
#132. M6 Allen Wrench
Customer Service 1-888-707-1880 8 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
ASSEMBLY
INSTRUCTIONS
ASSEMBLY STEP 1
1. Remove the treadmill from the carton and position it aside on a
smooth, level floor. The rear should be at least 3’ from any wall.
Do not remove the Velcro belt until you have removed the
plastic wrap and Styrofoam from beneath
the unit. Turning the unit on its side after removing the
belt may cause the unit fold up and cause serious injury!
ASSEMBLY STEP 2
1. Install the six Speed Nut Clips (128) on the Frame Base left and right side.
2. Slide the lower handlebar covers (64 & 65) onto the console masts (notice
orientation).
3. Slide the Frame Base Covers (62L & 63R) over the Upright tubes (4 & 5).
Connect the Lower Computer Cable (50) to the Middle Computer Cable (49)
on the right side of the unit.
Before attaching the hardware to Step 3, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
1
2
#128.M5 Speed Nuts
Clips (6 pcs)
HARDWARE STEP2
Customer Service 1-888-707-1880 9 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
ASSEMBLY STEP 3
1. Attach the Upright Tubes (4 & 5) onto the Frame Base (2)
with eight Button Head Socket Bolts (130) by using the
Combination M5 Allen Wrench & Phillips Head Screwdriver
(131). Do not tighten the bolts completely until Step 7 is
finished.
ASSEMBLY STEP 4
To complete this step, it is recommended that you find
something to rest the console on at the appropriate height or
have someone hold the console while you connect the cables
1. Connect the Speed Adjustment Switch Cable (54) to the
Speed Cable, Upper (37). Connect the Incline Adjustment
Switch Cable (55) to the Incline Cable, Upper (38). Connect
the Computer Cable, Middle (49) and Computer Cable,
Upper (48). Tuck the excess cable into the hand rail tubing to
prevent it from getting pinched.
Before attacheing the hardware to Step 5, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
3
#130. 5/16"× 1/2" Button
Head Socket Bolts (8 pcs)
HARDWARE STEP3
4
Customer Service 1-888-707-1880 10 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
ASSEMBLY STEP 5
1. Insert the Console Assembly (52) into the Upright Tubes (4 & 5)
and attach with four Button Head Socket Bolts (139) and four
Split Washers (113). Tighten using the M6 L Allen Wrench (132).
ASSEMBLY STEP 6
1. Attach the Left (64) and Right (65) Lower Handlebar Covers to
the top of the Upright Tubes (4 & 5) with six Sheet Metal
Screws (175). Tighten with the Combination M5 Allen Wrench
& Phillips Head Screwdriver (131).
5
#139. 3/8" × 1-3/4" Button
Head Socket Bolts(4 pcs)
#113. Ø10 × 2T
Split Washers (4 pcs)
HARDWARE STEP5
6
#175. 3.5 × 16mm
Sheet Metal
Screws (6 pcs)
HARDWARE STEP6
Loading...