SolarEdge 505P, 485P, 401P, 400P, 370P User Manual

Power Optimizer

For North America

P370 / P400 / P401 / P485 / P505

25

YEAR

WARRANTY

POWER OPTIMIZER

PV power optimization at the module-level

Specically designed to work with SolarEdge
inverters

Up to 25% more energy

Superior efciency (99.5%)

Mitigates all types of module mismatch losses,
from manufacturing tolerance to partial
shading

Flexible system design for maximum space
utilization

solaredge.com

Fast installation with a single bolt

Next generation maintenance with module­level monitoring

Meets NEC requirements for arc fault
protection (AFCI) and Photovoltaic Rapid
Shutdown System (PVRSS)

Module-level voltage shutdown for installer
and reghter safety

Power Optimizer

For North America

P370 / P400 / P401 / P485 / P505

Optimizer model
(typical module compatibility)

P370
(for higher-power 60
and 72-cell modules)

P400

(for 72 & 96-

cell modules)

P401

(for high power 60

and 72 cell modules)

P485

(for high-voltage

modules)

P505

(for higher

current modules)

INPUT

Rated Input DC Power

Absolute Maximum Input Voltage
(Voc at lowe󰎯 temperature)

MPPT Operating Range 8 - 60 8 - 80 8-60 12.5 - 105 12.5 - 83 Vdc

Maximum Short Circuit Current (Isc) 11 10.1 11.75 11 14 Adc

Maximum Eciency 99.5 %

Weighted Eciency 98.8 %

Overvoltage Category II

OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER

Maximum Output Current 15 Adc

Maximum Output Voltage 60 85 Vdc

(1)

370 400 485 505 W

60 80 60 125

(2)

(2)

83

Vdc

)

OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF

Safety Output Voltage per Power Optimizer 1 ± 0.1 Vdc

STANDARD COMPLIANCE

Photovoltaic Rapid Shutdown Sy󰎯em NEC 2014, 2017 & 2020 NEC 2014, 2017 & 2020 NEC 2014, 2017 & 2020

EMC FCC Part 15 Class B, IEC61000-6-2, IEC61000-6-3

Safety IEC62109-1 (class II safety), UL1741

Material UL94 V-0 , UV Resi󰎯ant

RoHS Ye s

INSTALLATION SPECIFICATIONS

Maximum Allowed Sy󰎯em Voltage 1000 Vdc

Compatible inverters All SolarEdge Single Phase and Three Phase inverters

Dimensions (W x L x H)

Weight (including cables) 655 / 1.4 750 / 1.7 655 / 1.4 845 / 1.9 1064 / 2.3 gr / lb

Input Connector MC4

Input Wire Length 0.16 / 0.52, 0.9 / 2.95

Output Wire Type / Connector Double Insulated / MC4

Output Wire Length 1.2 / 3.9 m / ft

Operating Temperature Range

Protection Rating IP68 / NEMA6P

Relative Humidity 0 - 100 %

(1) Rated power of the module at STC will not exceed the optimizer “Rated Input DC Power”. Modules with up to +5% power tolerance are allowed
(2) NEC 2017 requires max input voltage be not more than 80V
(3) For other connector types please contact SolarEdge
(4) For dual version for parallel connection of two modules use P485-4NMDMRM. In the case of an odd number of PV modules in one 󰎯ring, in󰎯alling one P485 dual version power optimizer connected
to one PV module. When connecting a single module seal the unused input connectors with the supplied pair of seals
(5) For ambient temperature above +85°C / +185°F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Technical Note for more details

(5)

-40 to +85 / -40 to +185 ˚C / ˚F

129 x 153 x 27.5 / 5.1 x 6

x 1.1

129 x 153 x 33.5 /

(4)

5.1 x 6 x 1.3

(3)

0.16 / 0.52 0.16 / 0.52, 0.9 / 2.95

129 x 153 x 29.5 /5.1 x 6

x 1.16

129 x 153 x 33.5 / 5.1

Single or dual MC4

(4)

(3)(4)

129 x 162 x 59 /

5.1 x 6.4 x 2.3

(3)

MC4

x 6 x 1.3

0.16 / 0.52 0.16 / 0.52 m / ft

mm

/ in

)

PV System Design Using a SolarEdge
Inverter

Minimum String Length
(Power Optimizers)

Maximum String Length (Power Optimizers) 25 25 50

Maximum Nominal Power per String

Parallel Strings of Different Lengths or Orientations Ye s

(6) For detailed 󰎯ring sizing information refer to: http://www.solaredge.com/sites/default/les/󰎯ring_sizing_na.pdf
(7) It is not allowed to mix P485/P505 with P370/P400/P401 in one 󰎯ring
(8) If the inverters rated AC power ≤ maximum nominal power per 󰎯ring, then the maximum power per 󰎯ring will be able to reach up to the inverters maximum input DC power. Refer to: https://www.solaredge.
com/sites/default/les/se-power-optimizer-single-󰎯ring-design-application-note.pdf
(9) For 208V grid: it is allowed to in󰎯all up to 7,200W per 󰎯ring when the maximum power difference between each 󰎯ring is 1,000W
(10) For 277/480V grid: it is allowed to in󰎯all up to 15,000W per 󰎯ring when the maximum power difference between each 󰎯ring is 2,000W

© SolarEdge Technologies Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc.
All other trademarks mentioned herein are trademarks of their respective owners. Date: 02/2021/V02/ENG NAM. Subject to change without notice.

(6)(7)

P370, P400, P401 8 10 18
P485, P505 6 8 14

Single Phase

HD-Wave

(8)

(6000 with

5700

SE7600-US - SE11400-US)

Single phase

(8)

5250

Three Phase for

208V grid

(9)

6000

Three Phase for

277/480V grid

(10)

12750

W