Solaira SCOMH03000SS, SCOMHO3000V, SCOMH01500 User Manual

/

Solaira Commercial High Ou tput Series

(H.O. Series)

Infrared Heaters

1500-3000W/120V Black

(for indoor/outdoor covered areas)

SCOMHO1500-120V

SCOMHO3000SS-120V

SCOMHO3000V-120V

Infrared Heater

Chauffage à rayons infrarouges

¾ ASSEMBLY AND USER'S MA NUAL
¾ INSTRUCTIONS POUR LE MONTAGE ET L'UTILISATION

Infrared Heating Systems

Inforesig ht Consumer Products Inc.

125 Traders Blvd E., Unit #4, Mississauga, Ontario L4Z 2H3
Tel [phone] Fax [phone]
www.solairaheaters.com

1

Ed.01

ENGLISH

Solaira Commercial High Output Series

(H.O.Series)

Infrared Heater

Solaira Comm ercial High Output Series Heater Inf rared Heaters are an extremely versatile radiant infrared heater

which can be used in a ra nge of strate gi c he atin g situ a tion s. It pr ovides immediat e heat, h as low ener gy consumption and
is compact w hile a ble t o he at lar ge ar eas. Sola ira Co m merci al Hig h Ou tpu t Se ries In fr ared H eate rs are desig ned and
manufactured to the highest technical standards and assembled using high quality components compliant with safety
standards and/or certificates.

Solaira H.O.S. (SCOMHO) Heater is supplied with:

• 1.5 metre cable

• adjustable wall bracket

WARNING !!

The safety of the instrument is guaranteed only with proper use of the following instructions. It is therefore
necessary to keep them for future reference. Disconnect from main electricity supply during installation and/or
replacement of the emitter.

• Connect Solaira H.O.S. (SCOMHO) Heater to a single-phase 110/120V – 60Hz power supply.

• Solaira H.O.S. (SCOMHO) Heater must be grounded.

• Check that the supply power is suitable for the load to be installed.

• Always position the equipment horizontally.

• The recommended minimum mounting height is 8’3”, (2.5 meters) in height or higher

• The recommended minimum mounting clearance to ceiling or structure above is 1’ (0.3 meters)

• The minimum distan ce from the front face of the heater and the surface to be heated must be at least 5’

(1,5m)

• Only touch the end caps. Shou ld you acci dentall y touch th e surface of the E mitter, cl ean it imm ediatel y with

a cloth moistened with alcohol.

• Emitters (Emitter) are damaged by contact with bare hands; in this case the warranty will be invalid.

• Do not cover or obstruct the heater when in use

• The power cab le must be repl aced only by th e manufactu rer, the assistance service or expert tech nicians.

“Risk of Fire – keep curtains at least 3 feet (0.9m) from the front of the heater and away from the
sides
WARNING – TO REDUCE THE RISK OF FIRE

1. Do not place any objects such as furniture, papers, clothes, and curtains closer than 5’
(1.5m) to the front of the heater and keep them away from the sides and rear when the heater
is plugged in.

2. Do not place the heater near a bed because objects such as pillows or blankets can fall off
the bed and be ignited by the heater.

3. Always un plug the heater i f it is not being used.

4. Avoid the use of an extension cord because the extension cord may overheat and cause a
risk of fire. However if you have to use an extension cord, the cord shall be No.14 AWG for
1500W (minimum size and rated not less than 1500watts) and no.10 AWG for 3000W
(minimum size and rated not less than 3000watts).

CAUTION – High temperature, risk of fire, keep electrical cords, drapery, furnishings, and other
combustibles at least 5 feet

rear.

For 1500W: Use only on 15 ampere for branch circuit.
For 3000W: Use only on 30 ampere for branch circuit

ASSEMBLY AND USER'S MANUAL

(1.5m) from the front of the heater and away from the side and the

2

IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to

reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this heater

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. If provided, use handles when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes, curtains at least a
5 feet (1.5m) from the front of the heater and keep them away from the sides 5’
(1,5m).

3. Extreme caution is necess ary when any heater is used in areas with children or
persons that may not have reasonable judgement around appliances. The heater
should never be used when unattended.

4. Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Return heater to
authorized service facility for examination, electrical or mechanical adjustment,
or repair.

5. Do not use outdoors in un-covered condition

6. This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. Never locate heater where it may fall into a bathtub or other
container.

7. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
the like. Arrange cord away from traffic area and where it will not be tripped
over..

8. Connect to properly grounded outlets only.

9. Do not insert or allow foreign objects to enter any ventilation or exhaust opening
as this may cause an electric shock, or damage the heater.

10. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft s urfaces, like a bed, where openings may become
blocked.

11. A heater has hot and arcing or sparking parts inside. Do not use it in areas
where gasoline, paint, or flammable liquids are used or stored.

12. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury to
persons.

13. Avoid the use of an extension cord because the extension cord may
overheat and cause a risk of fire. However if you have to use an extens ion cord,
the cord shall be No.14 AWG for 1500W (minimum size and rated not less than
1500watts) and no.10 AWG for 3000W (minimum size and rated not less than
3000watts).

14. SAVE THESE INSTRUCTIONS

3