SolaHD STC-DRS Series Data Sheet

Power Protection and Conditioning

Catalog
Number

Max Peak Signal

Voltage

Nominal

Breakdown

Voltage

Max Current

1p 10X1000 ms

(Occurrences)

Peak Current

8X20 ms

Typ. Cap

(PF)

Max

Continuous

Current

Nominal

Series

Resistance

STC-DRS-232

15 22 >100 10KA 1500 150ma

5 Ω

STC-DRS-036

30 36 >100 10KA 1500 150ma

5 Ω

STC-DRS-060

52 60 >100 10KA 1500 150ma

5 Ω

Notes:

These protectors are intended for indoor use on communication loop
circuits that have been isolated from the Public Switch Telephone
Network.

The communication loop circuits shall not be exposed to accidental
contact with the electric light or power conductors. The protectors
shall be installed per the applicable requirements of the National
Electric Code, ANSI/NFPA 70.

Using three-stage hybrid technology, this DIN Rail mount­able, single pair, surge suppressor attenuates over-voltage
transients with gas tubes and silicon avalanche components
while resetable fuses (PTCs) mitigate sneak currents. The
PTC increases resistance by several orders of magnitude
when over-currents exceed safe levels. A normal state
resumes when over-currents are removed. The ability to

self-restore in this manner signicantly increases suppressor

performance and survivability.

The STC-DRS Series mounts onto a standard 35 mm
industrial DIN rail. There are three Field Side and three
Electronics Side screw terminals. One is reserved for a
shield. Three electrically tied ground terminals are provided
for grounding the unit to building-approved ground. The
shield is isolated from ground.

Features

•

Low-Voltage Data Surge Protection

• Three-Stage Hybrid Technology

• Sneak/Fault Current Protection With

Resetable Fuses (PTCs)

• Low Prole Packaging

• Easy Installation

• Fits Standard 35 mm DIN Rail

• Fast Response Time <1 Nanosecond

• UL 497B Listed

• 5 Year Limited Warranty

Selection Table

Dimensions

497B

STC-DRS Series, DIN Rail Protection

1

29