Sola ATLAS GREEN Operating Instructions Manual

Download

ATLAS GREEN

Gebrauchsanweisung

Operating instructions

Manuel d’instructions

Instruzioni d‘uso

Instrucciones de uso

Gebruiksaanwĳzing

Руководство по применению

Instrukcja obsługi

Eksploatacĳos instrukcĳa

Lietošanas instrukcĳa

Uputstvo za upotrebu

Návod k použití

Manual de utilizare

Ръководство за употреба

Használati útmutató

Scope of delivery for ATLAS

1. ATLAS line laser

2. LB GREEN laser goggles

3. AA batteries

4. Quick Starter

5. Case

6. Stand adapter 1/4"

7. Stand adapter 5/8"

2.1 Device components, display and operating elements

1. Laser beam output opening

2. On/o switch, transport lock

3. Tripod adapter 5/8"

4. Battery compartment cover

5. Fine adjustment

6. Keypad

ATLAS GREEN operating manual

About this manual

Congratulations on the purchase of your new ATLAS GREEN! You have acquired a SOLA measurement instrument, which can make your work easier, faster and more precise. To utilize the complete functionality range of this measurement instrument, and to ensure a safe operation, please observe the following instructions:

• Please read this operating manual before starting to use the device.

• Always keep the operating manual near the device.

• Only hand over the device to other persons together with the operating manual.

• Never render the attached warning signs unreadable.

Contents

1. General information

2. Description

3. Technical data

4. Safety instructions

5. Laser safety / classiﬁcation

6. Startup

7. Operation

8. Checking the accuracy

9. Maintenance, storage and transportation

10. Scope of delivery and accessories

11. Troubleshooting

12. Disposal

13. Warranty

14. EC conformity declaration

1. General information

1.1 Signal words and their meaning DANGER

For an imminent danger that could lead to serious injury or death.

WARNING

For a possibly dangerous situation that could lead to serious injury or death.

CAUTION

For a possibly dangerous situation that could lead to slight injury or property damage.

NOTE

For application notes and other useful information

1.2 Pictograms and other information

1.2.1 Warning signs

Warning of dangers in general

1.2.2 Symbole

Read instructions before use

Batteries and devices must not be disposed of with household waste

Do not throw batteries into a ﬁre

Warning signs on battery Do not heat the battery above 60 °C.

Class 2 laser device

Do not look into the laser beam!

2. Description

2.1 Device components, display and operating elements

1. Laser beam output opening

2. On/o switch, transport lock

3. Tripod adapter 5/8"

4. Battery compartment cover

5. Fine adjustment

6. Keypad

2.2 Intended use

The ATLAS GREEN is a line laser that enables a single person to level and align plumb points as well as 90 degree angles horizontally and vertically. The device is designed to be preferably used indoors. For outdoor applications, it must be ensured that the ambient conditions are similar to those indoors. The visibility range of the laser lines depends on the ambient conditions. In low light conditions or for long distances, the hand-held receiver can be used to locate the laser line position (the hand-held receiver is not included in the standard delivery, but can be ordered as an option). Follow the instructions contained in this manual. The device and accessory equipment may be a source of danger if they are utilised improperly or inappropriately by persons who are not adequately instructed.

3. Technical data

3.1 ATLAS GREEN line laser

Working range

- Laser lines

- receiver Max. measurement tolerance

- Laser lines ± 0.2 mm / m Protection class IP 54 Levelling range (typical) ± 3° Levelling time (typical) ≤ 5 s Power supply 3 x 1.5 V AA batteries Battery life (at 20°C)

- AA batteries Permissible temperatures

Operating temperature Storage temperature

Laser diode lines/points 510-525 nm < 5 mW Laser class 2, DIN EN 60825-1 : 2014 Tripod adapter 5/8“ Weight without batteries 1100 g Dimensions H x W x L 125 x 123 x 204 mm

*... depending on the ambient conditions in the workplace. Subject to modiﬁcations (drawings, descriptions and technical data).

r = 25 m* r = 80 m*

6,5 h

-10°C to +50°C

-20°C to +60°C

4. Safety instructions

4.1 AREA OF RESPONSIBILITY

4.1.1 Manufacturer

SOLA is responsible for the safe delivery condition of the product, including the operating manual and the original accessories.

4.1.2 Operator

The operator is responsible for using the product as intended, the deployment of personnel, their training and the operational safety of the product.

The operator understands the safety information which is stated on the product and

the instructions which are contained in the operating manual.

The operator shall comply with local regulations relating to safety and accident prevention regulations

as well as worker protection laws and regulations.

The operator shall immediately notify SOLA if safety-related issues should develop on the product or

during its utilization.

The operator shall ensure that the product is not utilized any further if defects become evident, and he

will have the product repaired professionally.

4.2 Improper Use

Use of the device and the accessories without instruction. Use of third-party accessories or additional equipment. Use outside of the intended limits Use under extreme temperature ﬂuctuations without an adequate acclimatization. Disabling of safety devices and removal of hazard notices and labels. Unauthorized opening of the device. Performance of modiﬁcations or alterations the device or the accessories. Deliberate blinding of third parties. Inadequate safeguarding at the installation site.

(see Chapter 3 / Technical data)

4.3 Utilization limitations

The ATLAS GREEN is suitable for a continuous use in an atmosphere which can be inhabited by humans.

Do not operate the product in explosion-prone or corrosive environments. Inform the local safety authorities and safety experts before working in hazardous environments,

in close proximity to electrical installations or similar surroundings.

4.4 Usage Hazards

4.4.1 General

WARNING

Missing or incomplete instructions may result in improper or incorrect use. This can cause accidents with serious damages to persons, property, assets and the environment.

Follow the manufacturer‘s and operator‘s safety instructions. Protect equipment and accessories from access by children.

WARNING

Blinding by laser radiation can indirectly lead to serious accidents, especially for people who are driving a vehicle or operating machinery. Do not look into the laser beam.

Do not set up the laser beam and the laser plane at eye level or aim at people.

CAUTION

A fall, longer storage, transportation or other mechanical eects can lead to erroneous measurement results. Check the unit for damage before use. Do not use damaged equipment.

Repairs have to be exclusively performed by SOLA Before use, check the accuracy of the device

4.4.2 batteries / rechargeable batteries

DANGER

Mechanical damage can lead to a leakage, ﬁre or explosion of the batteries or trigger the release of toxic substances.

Batteries and rechargeable batteries may not be opened or exposed to mechanical loads. Damaged batteries, chargers and charging stations may not be used. Repairs have to be exclusively performed by SOLA.

(see Chapter 8 / Checking the accuracy)

WARNING

High ambient temperatures and immersion into liquids can cause a leakage, ﬁre or explosion of the batteries or trigger the release of toxic substances.

Protect batteries and rechargeable batteries from mechanical damage during transport. Never store the Li-Ion battery in the sun, on radiators or behind glass windows. Do not overheat batteries and rechargeable batteries or expose them to ﬁre. Avoid the ingress of moisture into batteries and rechargeable batteries. Do not use damaged batteries or rechargeable batteries. Dispose of properly.

WARNING

A short-circuiting or unintended use can cause batteries to overheat and create an injury or ﬁre hazard.

Do not transport or store batteries in the pockets of garments. Do not bring the battery contacts in contact with jewelery, keys, or other electrically conductive objects. Do not charge non-rechargeable batteries Do not discharge the batteries through short-circuiting. Do not solder the batteries within the device. Do not mix old and new batteries, and do not mix batteries from dierent manufacturers or

with a diering type designation.

WARNING

If disposed of improperly third parties can possibly be seriously injured and the environment polluted. The burning of plastic components generates toxic fumes which may impair the health of people. Batteries / rechargeable batteries may explode if they are damaged or heated excessively, and thereby cause poisoning, burning, corrosion or environmental contamination. If disposed of negligently unauthorized persons are able to use the product improperly.

The product must not be disposed of together with household waste. Dispose of the device and

accessories properly

Protect the product at all times from access by unauthorized persons, and especially children.

(see Chapter 12 / Disposal)

4.5 ELECTROMAGNETIC COMPATIBILITY (EMC)

The electromagnetic compatibility is the ability of the product to function in an environment where electromagnetic radiation and electrostatic discharge are present, without causing electromagnetic interference to other devices.

4.5.1 Interference of other devices by ATLAS GREEN

Although the product meets the strict requirements of the relevant directives and standards, SOLA can not completely exclude the possibility of interference with other devices (for example, when using the product in combination with third-party devices, such as ﬁeld computers, personal computers, wireless devices, mobile phones, certain cables or external batteries).

When using computers and radio equipment make sure to observe the vendor-speciﬁc information

about electromagnetic compatibility.

Only use original SOLA equipment and accessories.

4.5.2 Interference of the ATLAS GREEN by other devices

Although the product meets the strict requirements of the relevant directives and standards, SOLA can not entirely exclude the possibility that intense electromagnetic radiation in the immediate vicinity of radio transmitters, two-way radios, diesel generators, etc. can distort the measurement results.

When performing measurements under these conditions check the plausibility of the results.

5. LASER SAFETY/CLASSIFICATION

The ATLAS GREEN emits one 120° horizontal line as well as three 120° vertical lines. The product corresponds to Laser class 2 according to DIN EN 60825-1:2014.

Laser class 2:

With class 2 laser devices, eyes are protected by the the blink reﬂex and/or the aversion responses in the event that a person accidentally looks at the laser for a short time.

WARNING

Looking directly into the laser beam with optical aids (such as binoculars, telescopes) can be dangerous.

WARNING

Looking directly into the laser beam can damage the eyes.

Do not look into the laser beam. Do not point the laser beam at other people.

Labelling on the device:

510-525 5

See cover page for the position of the label.

Do not remove the label!

2014

6. Start-up

6.1 Operation with batteries

1. Open the battery compartment cover.

2. Insert batteries with the correct polarity into the ATLAS GREEN.

3. Close the battery compartment cover (audible click of the cover).

Use only 1.5v AA size (Mignon) batteries. Remove the batteries if the instrument is not used for an extended period.

NOTE

The intensity of the laser lines can vary depending on the battery quality.

7. Operation

7.1 ATLAS GREEN Switching the laser on / o On:

Turn the on/o switch, transport lock to the right (ON position) and the pendulum unit will be released.

The device transmits the horizontal 360° line from the output aperture. To turn o the vertical 360° line, press V on the keypad. The instrument will level itself automatically within the speciﬁed inclination range (see Chapter 3/Technical data).

O:

Turn the on/o switch, transport lock to the left (OFF position) and the pendulum unit will be locked; the laser lines will disappear.

NOTE

Magnets can aect the measurement instrument and lead to false results.

If the vertical laser line is not projected vertically to the wall or to the target surface, uneven surfaces can lead to erroneous measurement results.

Make sure that the vertical laser line is projected vertically to the wall or to the target surface.

Severe temperature ﬂuctuations can lead to erroneous measurement results.

Before start-up, allow the device to acclimatise to the environmental conditions.

The laser lines will ﬂash every 30 seconds when the battery capacity falls below 10%.

Recharge the battery regularly or ensure additional batteries are available.

7.1.2 PULSE mode

The REC LRD0 receiver can be used to detect the laser lines at even greater distances or in unfavourable environmental conditions. The pulse mode is active at all times for the ATLAS.

7.1.3 Creating inclinations beyond the range of automatic levelling On:

Turn the on/o switch, transport lock to the left (OFF position). Press and hold the tilt key for 5 seconds to start the tilt function. Press the V key to switch on the vertical lines. Press the H key to switch o the horizontal lines. To indicate that the self-levelling is switched o, the lines will blink every 4 seconds.

O:

Brieﬂy press the tilt key to exit the tilt function.

CAUTION

If the laser line is not projected vertically to the surface or the surface is uneven, this can lead to erroneous measurement results.

Make sure that the laser line is projected vertically to the wall or to the target surface.

7.2 Applications

7.2.1 Horizontal levelling 360°

7.2.2 Vertical levelling

7.2.3 90° angle

360°

7.3.4 Horizontales und vertikales Nivellieren

(mit Stativ -> optionales Zubehör)

7.3.5 Gestaltung im 90°-Winkel

7.3.4 Horizontales und vertikales Nivellieren

(mit Stativ -> optionales Zubehör)

7.3.5 Gestaltung im 90°-Winkel

90°90°

90°

7.2.4 Layout with a 90° angle

90°90°

7.2.5 Inclination

90°

7.2.6 Working at distances

ca. 1,2 m

8. Checking the accuracy

Check the accuracy of the ATLAS GREEN before each measurement.

Before starting the check, let the device acclimatise to the environmental conditions.

8.1 Checking the accuracy of the vertical line

Attach a plumb line as close as possible possible to a (at least) 3 m high wall.

Mount the ATLAS GREEN onto a tripod at a height of approx.

1.2 m.

Position the device approx. 3 m in front of the plumb line.

Switch on the ATLAS GREEN and project the vertical laser line onto the plumb line.

If the deviation is greater than 4 mm, the device must be readjusted. In this case, consult your dealer.

ca. 3 m

min. 3 m

8.2 Checking the leveling accuracy of the horizontal line

1. Select two horizontal, ﬂat walls (A & B), which are approx. 10 meters apart.

Mount the ATLAS GREEN onto a tripod and position it at a distance of approx. 20 cm from wall A.

Mark the intersecting point of the vertical and horizontal lines on wall A.

2. Rotate the ATLAS GREEN by 180° and mark point

on wall B.

Position the laser at the same height approx. 20 cm away from wall B and mark point

on wall B.

3. Rotate the ATLAS GREEN by 180° and mark point on wall A.

Measure the vertical distance

- and the vertical spacing of the points - .

of the marked points

A B

1 2

ca.

20 cm

180°

ca. 10 m

A B

180°

ca. 10 m

ca.

20 cm

Mark the center point of and .

If the reference points and are on dierent sides of the center point,

If the reference points and are on the same side of the center point,

Divide the results with twice the value of the room length.

If the result is greater than 4 mm, the device must be readjusted. For this, please consult your dealer.

must be subtracted from .

must be added to .

d 1

d 2

9. Maintenance, storage and transportation

9.1 Cleaning

Wipe o any dirt with a soft damp cloth.

Check the outlet openings of the laser regularly, and thoroughly clean them if necessary. Do not touch

the glass with your ﬁngers. Do not use aggressive cleaning agents or solvents. Do not immerse the device into water! Clean and dry wet equipment, accessories and transport containers prior to packaging them. Only

pack equipment again when it is completely dry. Keep plug connections clean and protected from moisture.

9.2 Storage

The equipment may only be stored within the speciﬁed temperature limits After a prolonged storage, check the accuracy of the measuring device before using it.

9.3 Transport

9.3.1 General

The device may be damaged by strong vibrations or by dropping.

Never transport the product loose. Always use the original packaging or an equivalent

transport container.

Switch o the measuring device before transporting it. During the shutdown the pendulum unit is

locked in position and protected against damage. Check the unit for damage before use. Regularly check the accuracy of the device

(see Chapter 8 / Checking the accuracy)

(see Chapter 3 / Technical data)

9.3.2 Batteries / rechargeable batteries

When transporting or shipping batteries, the operator is responsible for complying with the applicable national and international laws and regulations.

Before shipping, remove the batteries from the device.

10. Scope of delivery and accessories

10.1 Product contents ATLAS GREEN

1 ATLAS line laser 4 AA batteries 1 LB GREEN laser goggles 1 Quick Starter 1 case 1 Tripod adapter 1/4" 1 Tripod adapter 5/8"

10.2 ACCESSORIES (optional)

Receiver REC LRD0

Compact tripod FST Telescopic tripod TST Elevator tripod KST Construction tripod BST Clamp tripod KLST Flexi-gauge FL Measuring rod ML 5 Flexible wall bracket FWH Inclination wedge NK1 Thread adapter set GA-SET Laser goggles red LB RED Magnetic target ZS RED

Further information regarding the accessories can be found at www.sola.at

11. Troubleshooting

Error Possible cause Troubleshooting

Laser lines blink in one second intervals

Device turns o again immediately after startup.

Laser lines blink every 4 seconds

Laser lines ﬂash every 30 seconds

Device is beyond the

self-leveling range

Battery exhausted Rechargeable battery

exhausted

Device is in the manual

inclination mode

Battery capacity below 10% Replace batteries

Align the device horizontally

Replace the battery Recharge or replace battery

Turn the on/o switch,

transport lock to the right

(OFF position).

12. Disposal

Measuring tools, accessories and packaging must be recycled in an environmentally-friendly manner.

Your SOLA dealership will take back batteries as well as old equipment, and will ensure proper disposal.

Only for EU countries

The product as well as the accessories - especially the batteries and rechargeable batteries - must not be disposed of with household waste.

Dispose of the device and the accessories properly Only dispose of batteries in a discharged state. Observe the country-speciﬁc disposal requirements.

Electric tools must not be disposed of with household waste! According to the European Directive 2002 / 96 / EC on Waste Electrical and Electronic Equipment and its implementation in national law, no longer usable electrical and electronic equipment must be collected separately and recycled in an environmentally friendly manner.

13. Manufacturer‘s Guarantee

The manufacturer warrants to the original purchaser stated on the guarantee card, freedom from defects of the device for a period of two years, with the exception of batteries, as of the point in time the device is handed over. The guarantee is limited to repairs and / or replacements at the manufacturer‘s discretion. Defects which are caused through improper handling by the purchaser or third parties, natural wear and optical aws that do not affect the usability of the equipment, are not covered by this guarantee. Claims under this guarantee can only be invoked if the device is submitted along with the guarantee card, completely lled out by the dealer, dated and provided with the company stamp. If the guarantee claim is justied, the manufacturer shall bear the transport costs. The duration of the guarantee will not be extended through repair or spare parts work which is carried out within the scope of the guarantee. Further claims are excluded, unless these are stipulated by by the respective national legislation. In particular the manufacturer shall not be liable for any direct, indirect, incidental or consequential damages, losses purpose whatsoever. Implied warranties for the usage or suitability for a particular purpose are expressly excluded.

or expenses in connection with the use or because of the inability to use the tool for any

14. EG-Konformitätserklärung

Konformitätserklärung Declaration of Conformity Déclaration de Conformité

Wir / We / Nous SOLA-Messwerkzeuge GmbH, A-6840 Götzis, Austria

erklären in alleiniger Verantwortung, dass das Produkt(e)

declare under our sole responsibility that the Product(s)

déclarons sous notre seule responsabilité que le(s) produit(s)

auf das sich diese Erklärung bezieht, mit den folgenden Normen übereinstimmt.

ATLAS GREEN

to which this declarations relates is in conformity with the following standards.

auquel(s) se réfère cette déclaration est conforme aux normes.

ATLAS GREEN: EN 60825-1:2014 EN 61326-1:2013

Gemäss den Bestimmungen der Richtlinie(n)

Following the provisions of Directive(s)

Conformément aux dispositions de(s) Directive(s)

Electromagnetic compatibility 2014/30/EU

Low Voltage Directive 2014/35/EU

SOLA-Messwerkzeuge GmbH, Unteres Tobel 25, A-6840 Götzis, Austria

Phone +43(0)5523 53380, sola@sola.at, www.sola.at

EN 61010-1:2010

SOLA-Messwerkzeuge GmbH

Mag. Wolfgang Scheyer CEO

Sola ATLAS GREEN Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual