・External Device Port Cover Installation Tool (complimentary
sample)
・AC Charger (SHCEJ1)
・Micro USB Cable (SHDDL1)
・クイックスタート (Japanese)
・お願いとご注意 (Japanese) with English "Quick Tips"
・Warranties (Japanese) for handset and AC Charger
・microSD Card (complimentary sample)
Parts & Functions
Handset Parts
NameDescription
Notification
Lamp
Proximity/
Light Sensor
Earpiece
Internal
Camera
Strap
Eyelet
Headphone
Port
Display
Illuminates while charging or for
notifications (missed calls, new messages,
etc.).
Detects ambient light level, etc.
Hear other party's voice through this.
Shoot photos or videos.
Attach Straps here.
Connect specified Headphones with Mic
here.
Touch Display to select menu items, open
functions, scroll pages, etc.
NameDescription
Infrared
Port
External
Camera
Mic
External
Device Port
Speaker
Mobile
Light
FeliCa Logo
Battery
Cover
Transfer files using Infrared.
Shoot photos or videos.
Talk to other party through this.
Connect AC Charger or Micro USB Cable
here.
Listen to music, video/One Seg audio, etc.
through this.
Use as a flashlight or camera flash.
Place over reader/writer to use OsaifuKeitai®.
Access USIM Card and SD Card.
Attaching Straps
Remove Battery Cover, then feed Strap loop through Strap
Eyelet, latching it on the peg. Secure Strap then replace
Battery Cover.
7
Getting Started
Handset Keys
NameDescription
Activate/cancel Screen lock. Long Press
(Power Key)
(Volume Down
Key)
(Volume Up
Key)
for power on/off or phone options.
Decrease Volume. In Welcome sheet (lock
screen) or 3-Line Home, Touch & Hold to
activate/cancel Manner mode.
Increase Volume. In Welcome sheet (lock
screen), Touch & Hold to turn on Mobile
Light (Press to turn it off).
SoftBank 200SH
8
Cover Installation
Removing Battery Cover
Power off and wait until handset cools down beforehand.
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch () to remove it.
Installing Battery Cover
Confirm Card Slot Cover (○ in of "Inserting USIM Card") is
firmly closed beforehand.
Installing External Device Port Cover
Always use External Device Port Cover Installation Tool
(hereafter "Installation Tool") included with SoftBank 200SH.
Using other devices may damage External Device Port Cover
(hereafter "Port Cover"), etc.
Open Port Cover
・Use notch to slightly lift Port Cover.
Pull Port Cover out of handset
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
・Pull Port Cover straight out using hinge; pulling at the
other edge may cause damage.
Set Installation Tool to Port Cover
・Fit Port Cover shaft in Installation Tool bearing, then slide
Port Cover to fit gasket in Installation Tool.
Insert Port Cover shaft in Shaft Hole
・Push Installation Tool to fit Port Cover shaft in handset.
Remove Installation Tool from Port Cover
USIM Card Installation
9
Close Port Cover
・Close Port Cover firmly. Debris trapped between gasket and
base may expose handset to liquid/dust. (Port Cover must
be closed properly to maintain water/dust resistance.)
・Take care not to lose Installation Tool.
Battery Cover
General
Use handset with Battery Cover installed.
Replacement
If Battery Cover is damaged, replace it with a new one.
Protective Sheet Cautions
Under Protective Sheet
USIM Card is an IC card containing customer and
authentication information, including handset number.
Getting Started
SD/USIM Card Insertion/Removal Tool
There are two inscriptions (one for USIM and one for microSD)
on SD/USIM Card Insertion/Removal Tool. Align the USIM side
over the back of handset.
・Always use SD/USIM Card Insertion/Removal Tool (hereafter
"Insertion/Removal Tool) included with SoftBank 200SH to
remove USIM Card. Using other devices may damage handset
and USIM Card.
There are Battery and precision parts under Protective
Sheet. Do not peel, damage or subject it to impact; may
cause malfunction, overheating, ignition, electric shock,
impairment, burn injuries, etc.
Heat Caution
Protective Sheet () may be hot to the touch while
power is on or immediately after powering off, leading to
burn injuries.
SoftBank 200SH
10
Inserting USIM Card
Power off and wait until handset cools down beforehand. Do
not touch Protective Sheet while handset is hot; may cause
burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch () to remove it.
Open Card Slot Cover
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
Insert USIM Card into USIM Card Slot
・Confirm orientation of USIM Card (see the notch), then
insert it with metal contacts facing down.
Align Insertion/Removal Tool with Card Slot, with the USIM
side (USIM挿抜時:この面が背面側) facing up
・Set Card Slot Cover downward as shown so as not to get it
caught between handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
Removing USIM Card
11
Power off and wait until handset cools down beforehand. Do
not touch Protective Sheet while handset is hot; may cause
burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch () to remove it.
Open Card Slot Cover
Close Card Slot Cover
Getting Started
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
・Take care not to lose Insertion/Removal Tool.
Align Insertion/Removal Tool with Card Slot, with the USIM
side (USIM挿抜時:この面が背面側) facing up
・Set Card Slot Cover downward as shown so as not to get it
caught between handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
・Pull back Insertion/Removal Tool slowly (USIM Card pops out
slightly). Pulling it back quickly may make USIM Card jump
out.
Remove USIM Card
・Remove carefully without bending it.
SoftBank 200SH
12
SD Card
Handset supports SD Card up to 64 GB. Some SD Cards may
not operate properly.
SD/USIM Card Insertion/Removal Tool
There are two inscriptions (one for USIM and one for microSD)
on SD/USIM Card Insertion/Removal Tool. Align the SD side
over the back of handset.
・Always use SD/USIM Card Insertion/Removal Tool (hereafter
"Insertion/Removal Tool) included with SoftBank 200SH to
remove SD Card. Using other devices may damage handset
and SD Card.
Unmounting SD Card
Always unmount SD Card before removing it. (Complimentary
SD Card preinstalled.)
In application sheet,(Settings)
microSD & phone storage
Unmount microSDOK
Unmount microSD changes to Mount microSD . (SD Card
is unmounted.)
Removing SD Card
13
Power off and wait until handset cools down beforehand. Do
not touch Protective Sheet while handset is hot; may cause
burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch () to remove it.
Open Card Slot Cover
Close Card Slot Cover
Getting Started
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
Align Insertion/Removal Tool with Card Slot, with the SD side
(microSD挿抜時:この面が背面側) facing up
・Set Card Slot Cover downward as shown so as not to get it
caught between handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
・Pull back Insertion/Removal Tool slowly (SD Card pops out
slightly). Pulling it back quickly may make SD Card jump out.
Remove SD Card
・Remove carefully without bending it.
SoftBank 200SH
14
Inserting SD Card
Power off and wait until handset cools down beforehand. Do
not touch Protective Sheet while handset is hot; may cause
burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch () to remove it.
Open Card Slot Cover
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
・Take care not to lose Insertion/Removal Tool.
Insert SD Card into SD Card Slot
・Insert SD Card with terminals facing down.
Align Insertion/Removal Tool with Card Slot, with the SD side
(microSD挿抜時:この面が背面側) facing up
・Set Card Slot Cover downward as shown so as not to get it
caught between handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
Formatting SD Card
15
When using a new SD Card for the first time, format it on
handset before trying to save files, etc.
・Formatting deletes all SD Card files.
・Perform formatting while charging, or after charging
handset adequately.
In application sheet,(Settings)
microSD & phone storage
Enter Operation PasswordOK
Getting Started
・If Operation Password is unset, follow onscreen
instructions.
Erase everything
Erase microSD
Erase SD card
Handset erases all SD Card files.
・When finished, SD Card is mounted.
Complimentary Sample SD Card
Complimentary SD Card is preinstalled.
・Warranty does not cover complimentary sample SD Card.
SoftBank 200SH
16
SD Card Usage Notes
General
SD Card files may be lost/altered accidentally. Keep a copy
of contacts, etc. in a separate place. SoftBank Mobile is
not liable for any damages resulting from accidental loss/
alteration of information.
・Never power off while files are being accessed.
microSDXC Card
Handset supports microSDXC Cards (SDXC-compatible SD
Cards). microSDXC Cards are supported by SDXC-compatible
devices only.
Exchanging Files with Non-SDXC-Compatible
Devices
To exchange files between handset and non-SDXCcompatible devices, use SD Cards (microSD/microSDHC
Cards) supported by handset and those devices. Inserting
microSDXC Card used on handset in non-SDXC-compatible
devices may corrupt card files. In such cases, do not
format the microSDXC Card on those devices even if
prompted to do so.
・Formatting deletes all microSDXC Card files and changes
the file system. The original memory capacity may be
unavailable after formatting. To use corrupted microSDXC
Card, format it on SDXC-compatible devices.
Charging Handset
Battery is built into handset.
AC Charger, Micro USB Cable, Micro USB Charging Adapter
(optional accessory) and In-Car Charger (optional accessory)
are not water or dust proof. Do not charge handset while it is
wet.
AC Charger
Use AC Charger (SHCEJ1).
・AC Charger and Micro USB Charging Adapter are not water
or dust proof. Do not charge Battery while handset is wet.
Open External Device Port Cover (hereafter "Port Cover")
・Use notch to slightly lift Port Cover, then gently pull it
open being careful not to dislodge it.
General Use
Keep SD Card out of infants' reach; may cause choking if
swallowed.
Insert Micro USB plug of AC Charger into External Device Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Confirm contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Plug AC Charger into AC outlet after rotating blades out as
shown
Notification Lamp illuminates while charging, and goes out
when charge is full.
Unplug AC Charger and retract blades
Remove Micro USB plug from External Device Port
Lithium-ion Battery
17
Close Port Cover
・Close Port Cover firmly. Debris trapped between gasket and
base may expose handset to liquid/dust.
USB Charging
Connect handset to a PC with Micro USB Cable (SHDDL1).
・Power on handset and PC first.
・To use Fast transfer mode, install USB Cable driver on the
PC beforehand.
・Handset may not charge or charge slowly depending on PC
status/environment.
Open Port Cover
This product requires a lithium-ion battery. Lithiumion batteries are recyclable. To recycle a used lithiumion battery, take it to any shop displaying the recycling
symbol.
・To avoid fire or electric shock, do not short-circuit or
disassemble Battery.
Charging Precautions
Handling Cables
Do not pull, bend, or twist cable.
Handling Port Cover
Remember these points when closing Port Cover:
・Close Port Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
・Do not try to close Port Cover with hinge extended; may
deform Port Cover and affect water/dust resistance.
Getting Started
・Use notch to slightly lift Port Cover, then gently pull it
open being careful not to dislodge it.
Insert Micro USB plug of Micro USB Cable into External Device
Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Confirm contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
・There are two types of plug for supported Micro USB Cable.
(Plug type varies by product.)
Insert Micro USB Cable into PC USB port
Important USB Charging Note
Handset may power on automatically when connected to a
PC with Micro USB Cable; avoid connection aboard aircraft
or in hospitals, etc. where handset use is prohibited.
Battery Care
To help maintain performance and life of Internal Battery,
do not store in the following conditions.
・Full (immediately after charging is complete)
・Exhausted (too low to power on handset)
Periods of Disuse
Charge at least once every 6 months; if left uncharged,
handset may become unusable or files/settings may be
affected.
Bulges of Internal Battery
Depending on usage, bulges may appear near end of battery
life; this does not affect safety.
Internal Battery Replacement
Notification Lamp illuminates while charging, and goes out
when charge is full.
・Remove Micro USB Cable from handset and PC, then close
Port Cover.
Internal Battery is a consumable item; may need to be
replaced if operating time shortens noticeably. Internal
Battery is not user replaceable; its replacement incurs fees
and requires handset submission to a SoftBank Shop, etc.
For details, contact a SoftBank Shop or SoftBank Customer
Support, General Information.
SoftBank 200SH
18
Power On/Off
Power On
Long Pressuntil SoftBank logo appears
After Power On Graphics, Welcome sheet (lock screen)
In any application, Taprepeatedly until 3-Line Home
returns. (Some applications may remain active.)
25
Using Application Use History
In application sheet,
Application use history (a list of recently used
applications) appears.
・
appears before names of active applications.
Tap application
Handset Phone Number
My Phone Number
In application sheet,(Settings)Profile
Basic Operations
Profile opens.
・Handset number appears in Own phone number field.
Application activates.
・Flick active application left/right to exit it.
Obtaining Applications
Obtain applications from(Play Store).
Deleting Application Use History
All Items
In application use history,
Single Item
In application use history, Flick item left/right
SoftBank 200SH
26
Saving User Information to Profile
In application sheet,(Settings)Profile
Profile opens.
(edit) on Action Bar
Mobile Manners
Manner Mode
Mute ringtones and other handset sounds to avoid disturbing
others around you.
・Camera shutter, video recording tones, etc. still sound even
in Manner mode.
(Long Press)
Manner mode activates.
Profile entry window opens.
Tap item (entry field)
・
Tapto show/add entry field orto delete.
Complete field
・Tap other items and complete fields as needed.
・
To cancel, Long Press.
Airplane Mode
Suspend signal transmitting functions.
(Long Press)
Phone options appear.
Airplane mode
SaveYes
Profile is saved.
Airplane mode activates.
・
To cancel, Long Press, then Tap Airplane mode .
27
Selecting Manner Mode Option
(Long Press)Tap icon (, etc.)
Airplane Mode Precautions
Activating Airplane mode disables Wi-Fi and Bluetooth®,
interrupting corresponding transmissions.
Wi-Fi/Bluetooth® connections can be used even in Airplane
mode by enabling Wi-Fi/Bluetooth® after activating
Airplane mode ; make sure that such connection/
transmission is allowed in your current location before use.
Text Entry
Keyboards
Use onscreen keyboards for text entry. In 12-key Keyboard,
multiple characters are assigned to each key. In QWERTY
Keyboard, a single character is assigned to each key.
Basic Operations
・Tap a text entry field for keyboards.
・Default input method: iWnn IME - SH edition.
Switching Keyboards
In a text entry window,Change input UI
・When How to Change Input UI window opens after
Tapping, Tap CLOSE . To disable it thereafter, select
Don't show again beforehand.
Set QWERTY keyboard or Set 12 keyboard
Keyboard is switched.
SoftBank 200SH
28
12-Key Keyboard Layout
Enter characters.
Undo conversion.
Backspace cursor.
Enter pictograms, symbols, or emoticons; switch
conversion options.
Toggle entry modes.
Enter space; toggle case; add ゛ or ゜ for hiragana.
Current entry mode
Delete characters.
Advance cursor; add space at text end.
Open text entry options; enter space; convert hiragana.
Insert line break; confirm current characters.
Switching Entry Modes
Tapto toggle Half Numeric, Kanji, and Half Alphabet
modes. To use other entry modes:
・
Alternatively, Flickleft/right to toggle entry modes.
In a text entry window,Change input mode
Tap mode
QWERTY Keyboard Layout
Enter characters.
Toggle case.
Toggle entry modes.
Enter pictograms, symbols, or emoticons.
Open text entry options.
Enter space; convert hiragana.
Current entry mode
Delete characters.
Insert line break; confirm current characters.
Advance cursor; add space at text end.
Backspace cursor.
Keyboard interface changes accordingly. Current entry mode
Pay once. Re-downloads of uninstalled applications are free
of charge.
Use on Other Android Devices
Install same application on other Android devices under
same Google Account at no added cost.
Application Operations
Refund Requests
Request refunds within designated period. Returned
applications are deleted from handset; no payment is
required. (One refund request per application.)
In Google Play,My AppsTap application
Refund
Tap paid applicationTap priceFollow onscreen
instructions
Application downloads and installs.
Enabling Automatic Updates
In Google Play,My AppsTap application
Allow automatic updating ()
・Automatic update is not available for some applications.
33
Google Play Cautions
Application Installation Disclaimer
Download and install applications on this handset
via Google Play (Developed by Google Inc.) at your
own risk. SoftBank Mobile is not responsible for user
installed application content (quality, reliability, legality,
appropriateness, accuracy, etc.) or malfunctions installed
applications may cause (due to viruses, etc.).
Application Purchase Disclaimer
Purchase applications via Google Play at your own risk.
SoftBank Mobile is not responsible for transactions
between users and third party publishers.
Google Play Automatic Updates
Operations are subject to change due to automatic
application updates.
Security Codes
Handset Code & Center Access Code
Center Access Code (Network Password; 4-digit code in
contract) is required to use Optional Services from landlines
or subscribe to fee-based information.
Basic Operations
・Do not forget Operation Password and Center Access Code
(Network Password). If you forget these codes, contact
us for recovery. For details, contact SoftBank Customer
Support, General Information.
・Do not reveal Operation Password or Center Access Code
(Network Password). SoftBank Mobile is not liable for
misuse or damages.
・Call Barring settings will be locked if incorrect Center
Access Code (Network Password) is entered three times
consecutively when making a setting. To unlock, the code
must be changed. For details, contact SoftBank Customer
Support, General Information.
・If Network Password has been previously changed on a
mobile phone, enter the latest code to set Call Barring.
SoftBank 200SH
34
Setting Operation Password
Do not forget Operation Password; write it down if necessary.
In application sheet,(Settings)Other settings
Lock & Security
Operation password settingOKEnter Operation
PasswordOK
USIM PIN
9999 by default; enable USIM card lock to restrict handset
use.
Enabling USIM Card Lock
In application sheet,(Settings)Other settings
Lock & Security
USIM card lock settingsLock USIM cardEnter PIN
OK ()
Re-enter Operation PasswordOKOK
Operation Password is set.
USIM card lock is enabled.
Changing USIM PIN
Enable USIM card lock first.
In application sheet,(Settings)Other settings
Lock & Security
USIM card lock settingsChange USIM PINEnter
current PINOKEnter new PINOKRe-
enter new PINOK
PIN is changed.
35
PIN Cautions
Entering incorrect PIN three consecutive times activates
PIN Lock. To cancel, Personal Unblocking Key (PUK) is
required; contact SoftBank Customer Support, General
Information. Entering incorrect PUK ten consecutive times
activates PUK Lock, disabling handset. For recovery, USIM
Card must be reissued at a SoftBank Shop (fees apply).
Screen Lock
After a period of inactivity, Display goes completely dark to
extend battery time (Screen lock active). Screen lock prevents
accidental Touchscreen operation.
Activating Screen Lock Manually
Basic Operations
When Display is active,
Display goes completely dark and Screen lock activates.
Canceling Screen Lock
Pressto open Welcome sheet (lock screen), then cancel
Screen lock.
・See "Welcome Sheet (Lock Screen) Basics" for details.
Maintaining Screen Unlocked while
Hand-Holding Handset
In application sheet,(Settings)Wallpaper &
displayBright KeepON (Notify) or ON (Not
notify)
・
For ON (Notify) ,appears indicating Bright Keep is
enabled.
・Hand-held state is determined based on handset angle
and Proximity/Light Sensor responses; may not be
determined correctly depending on usage status.
SoftBank 200SH
36
File Backup
File Backup (Handset to SD Card)
Back up handset files (Address Book contacts, sent/received
messages, bookmarks, etc.) to SD Card.
In application sheet,(Settings)microSD & phone
storage
microSD backup
Battery & Memory
Battery Strength
Backup stops if Battery runs low. Confirm battery charge
beforehand.
Memory Status
microSD backup requires 11 MB of free space in handset
To select () or cancel () multiple items together at
once in Backup item list, Tap(check all) or(uncheck
all) on Action Bar.
Software Updates
Software Updates
At specified time, handset automatically checks for/downloads
firmware updates as required. To update firmware manually:
In application sheet,(Settings)Device info
37
Basic Operations
Software update
Software updateExecuteFollow onscreen
instructions
Software update starts.
Before Software Update
Handset data may be lost to damage, malfunction, etc.
Back up important information before updating software.
SoftBank Mobile is not liable for loss or associated
damages.
Software Update Cautions
During Update
Handset cannot be used until Software Update completes;
it may take some time to complete.
Signal Conditions
Confirm signal strength and battery charge beforehand.
Poor signal strength or low battery charge may disrupt
updates leading to update failure. Update failure may
disable handset.
Welcome sheet (lock screen) appears at power on or
whenis Pressed while Display is completely dark (Screen
lock active).
From Welcome sheet (lock screen), cancel Screen lock, activate
an application such as Phone or Mail, etc.
Layout
Handset status/notifications appear here.
Wallpaper
Drag down to cancel Screen lock; Tapthen Tap
application to activate it.
Tapto show owner information.
Notifications of missed calls and new messages appear
here.
Date, time, etc. (Flick left/right for weather and other
information.)
1
Activating Applications
Activate Camera, Phone or Mail from Welcome sheet (lock
screen).
・Change assigned applications as needed.
In Welcome sheet (lock screen), Tap
Menu opens.
Tap application
1 Set owner information beforehand. (In application
sheet, Tap(Settings)Other settingsLock &
SecurityOwner infoEnter text.)
Canceling Screen Lock
In Welcome sheet (lock screen), Dragdown
Screen lock is canceled.
・When Screen lock option other than Slide or None is
selected, follow onscreen instructions to cancel Screen lock.
Application activates.
・
Tap Welcome sheet setting to set Wallpaper, etc.
Missed Call & New Message
Notifications
Notification--New missed call(s) or New mail(s)--appears in
Welcome sheet (lock screen).
Drag notification down to open it.
41
3-Line Home Basics
3-Line Home consists of application sheet, widget sheet and
shortcut sheet. Most operations start here.
Access applications and widgets, save frequently used
applications to shortcut sheet, change handset settings, etc.
Toggling Sheets
Flick left/right to toggle these sheets.
Application Sheet Layout
Widget Sheet Layout
Handset Interface
Handset status/notifications appear here.
Toggle sheets.
Use widgets. (Flick up for hidden widgets; Flick down
for menu.)
Activate Phone.
Activate Mail.
Activate Browser.
Open application use history.
Handset status/notifications appear here.
Toggle sheets.
Activate applications. (Flick up for hidden applications;
Flick down for menu.)
Activate Phone.
Activate Mail.
Activate Browser.
Open application use history.
Shortcut Sheet Layout
Handset status/notifications appear here.
Toggle sheets.
Activate applications. (Flick up for hidden shortcuts;
Flick down for menu.)
Activate Phone.
Activate Mail.
Activate Browser.
Open application use history.
SoftBank 200SH
42
Status Bar
Indicators (new message notification, handset status, etc.)
appear at the top of Display.
Layout
Notifications and warnings appear here. (Notification
Indicators)
Handset status appears here. (Status Indicators)
Notification Indicators
Notification Indicators appear on the left.
IndicatorDescription
Guide on Handset
Urgent News
Call in Progress
Call On Hold
Missed Call
Answer Phone Message Recorded
New Voicemail
New SMS/S! Mail
New Internet Mail
New Gmail
Alarm Time Passed
Event in Calendar
Energy Saving (Waza. Mode) Active
Energy Saving (Emerg. Mode) Active
One Seg (Watching)
One Seg (Recording)
App Installation Complete
App Update Available
Text Entry Window (Select Input Method)
Positioning (GPS)
Data Downloading
SD Card Unmounted
Preparing SD Card
USB Connected
Wi-Fi Direct in Use
Screenshot Captured
More Notifications
New Notification from 音声アシスト (Onsei
Assist Voice Assistant Application)
43
Status Indicators
Status Indicators appear on the right.
IndicatorDescription
Battery Strength
Charging
Signal Strength
No Signal
4G Data in Use
3G Data in Use
Roaming
Airplane Mode
Wi-Fi Connected
Bluetooth® On
Bluetooth® Connected
Standard Manner Mode
Drive Manner Mode
Silent Manner Mode
Mic Muted
Speakerphone On
Answer Phone On
Answer Phone On (Message Recorded)
Alarm Set
Osaifu-Keitai Locked
Kanji Mode
Half Alphabet Mode
Half Numeric Mode
Half Katakana Mode
Full Alphabet Mode
Full Numeric Mode
Full Katakana Mode
Character Code Mode
Notifications Window
Open notifications, confirm handset status or change various
settings.
Opening Notifications Window
Drag Status Bar down
Notifications Window opens.
・
Tapto exit.
Layout
Setting Keys
Show second line of Setting Keys.
Notifications and active functions
Handset status
Close Notifications Window.
Open Settings.
Delete all notifications.
1 Tap for corresponding settings.
1
Handset Interface
SoftBank 200SH
44
Setting Keys
Toggle Manner mode options.
Toggle Wi-Fi on/off.
Toggle GPS positioning on/off.
Toggle automatic Display rotation on/off.
Toggle Display brightness.
Show second line of Setting Keys.
Toggle VeilView on/off.
Toggle Bluetooth® on/off.
Toggle account sync on/off.
Toggle Reader/Writer, P2P on/off.
Open window for rearranging Setting Keys.
Hide second line of Setting Keys.
Customizing Welcome Sheet (Lock
Screen)
Set Wallpaper for Welcome sheet (lock screen) or select Screen
lock option.
Setting Wallpaper
Flick Wallpaper left/right to toggle preset images.
To replace with other still images:
In Welcome sheet (lock screen), Tap
Notifications Window Operations
Deleting Notifications
In Notifications Window, Flick notification left/right
・Some notifications may not be deleted.
Rearranging Setting Keys
In Notifications Window, RearrangeDrag icon to
target location(done)
・Icons cannot be moved to the empty area of second line
(where Rearrange appears in Notifications Window).
Welcome sheet setting
Welcome Sheet wallpaper(next to Image)
Page 1 to Page 5
Customizing 3-Line Home
45
Contents manager or PresetTap or select image
Save or Set to wallpaper
Wallpaper is set.
Selecting Screen Lock Option
In application sheet,(Settings)Other settings
Lock & SecurityScreen lock
Set Wallpaper, move icons/widgets or add shortcuts/widgets
to corresponding sheets.
Setting Wallpaper
In 3-Line Home, Drag down
Handset Interface
Menu opens.
Home settings
Tap Screen lock option
Corresponding setup window opens.
・
Follow onscreen instructions. (Not required when None or
Slide is selected.)
In Wallpaper Settings field, Select from list
Tap Contents manager , Gallery , Live Wallpapers or
Wallpaper gallerySet accordingly
Wallpaper is set.
SoftBank 200SH
46
Moving Icons/Widgets
In 3-Line Home, Touch & Hold icon/widget
orappears at upper right of icon/widget.
Drag to target location
Release to place icon/widget.
・To a folder: Drag icon to target folder.
Adding Shortcuts
Add an application shortcut.
In shortcut sheet,(設定しよう)
Setting
ApplicationTap application
Shortcut is added to shortcut sheet.
Adding Widgets
Add Album, Analog clock, etc.
In 3-Line Home, Drag down
Menu opens.
Add widget
47
Handset Interface
Tap widget
Widget is added.
Removing Widgets/Shortcuts
In widget sheet or shortcut sheet, Touch & Hold widget or
・Hiding Caller ID (using 184, etc.) cancels Location Report.
However, corresponding agency may obtain location
information in life threatening situations.
・Location Report is not sent for calls made while outside
Japan.
Missed Calls
For unanswered calls, (Notification Indicator for missed
calls) appears. In Welcome sheet (lock screen), notification
appears.
Optional Services
Use these SoftBank Optional Services:
Optional Services
ServiceDescription
Call
Forwarding
Voicemail
Call Waiting
Group Calling
Caller ID
Call Barring
1 Requires separate subscription
Divert all/unanswered calls to a preset
number.
Divert all/unanswered calls to Voicemail
Center; access messages via handset/
touchtone phones.
1
Answer calls during a call.
Switch between open lines/connect
1
multiple lines.
Show or hide your number when placing
calls.
Restrict incoming/outgoing calls by
conditions.
Phone
Notification Indicator
Notification
・Drag Status Bar down for Notifications Window, then Tap
missed call notification to open Incoming History.
・Drag notification down to open Incoming History.
Emergency Call Restriction
Emergency calls are restricted when Airplane mode is
active. Long Pressand cancel it.
SoftBank 200SH
52
Call Forwarding
OK
In application sheet,(Settings)Call
Call settings opens.
Voicemail/divert
Call Forwarding is set.
Voicemail
In application sheet,(Settings)Call
Call settings opens.
Voicemail/divert
Voicemail/divert menu opens.
Voicemail/divert menu opens.
Settings/stop
Divert menu opens.
Always or No answerEnter number
Settings/stop
Divert menu opens.
Always or No answerVoicemail
・
For No answer , Tap Wait time and select ring time as
needed.
・
To cancel Voicemail, Tap Stop call forwardYes .
OK
・
For No answer , Tap Wait time and select ring time as
needed.
・
To cancel Call Forwarding, Tap Stop call forward
Yes .
Voicemail is set.
・
When a new message is recorded,appears. To play
messages, Tap Play voicemail in Voicemail/divert menu,
then follow voice guidance.
53
Call Waiting
Requires separate subscription.
In application sheet,(Settings)Call
Call settings opens.
Other service settings
Group Calling
Requires separate subscription.
During a call,Add Call
Phone
Enter numberCall
When call connects,Merge calls
Other service settings opens.
Call waiting ()
Call waiting is set.
・During a call, a tone sounds for incoming calls;
Dragright.
・
To cancel Call Waiting, Tap Call waiting .
Group Calling starts.
SoftBank 200SH
54
Caller ID
In application sheet,(Settings)Call
Call settings opens.
Other service settings
Other service settings opens.
Notify caller IDHide number or Show number
Call Barring
Restrict outgoing/incoming calls and SMS messages.
・Call Barring requires Center Access Code (Network
Password).
・Call Barring settings will be locked if incorrect Center
Access Code (Network Password) is entered three times
consecutively when making a setting. To unlock, the code
must be changed. For details, contact SoftBank Customer
Support, General Information.
・If Network Password has been previously changed on a
mobile phone, enter the latest code to set Call Barring.
・Failure message appears when attempting to place/send
calls/SMS with outgoing call restriction active. Message may
take time to appear in some areas.
RestrictionDescription
All outgoing
calls
Bar int'l call
Local & home
only
Restrict all
incomings
Bar if abroadReject calls while outside Japan.
Restrict all non-emergency calls.
Restrict international calls; while outside
Japan, calls within current country are
allowed.
Restrict international calls; while outside
Japan, calls within current country and to
Japan are allowed.
Reject all calls.
Caller ID is set.
In application sheet,(Settings)Call
Call settings opens.
Call barring
Call barring menu opens.
Optional Services Operations
55
Bar outgoing calls or Bar incoming callsTap option
Enter Center Access Code (Network Password)OK
Restriction is set.
Setting Missed Call Notification
Activate this function for records of calls missed when
handset is off/out-of-range. Initiate Voicemail then follow
・Contacts are sorted by the first character of last name
(Read last).
Phone
Handset dials the number. Wait for other party to accept
the call.
To end the call, End call
Call ends.
SoftBank 200SH
58
Address Book Caution
If handset is left uncharged, contacts may be altered/
lost; handset damage may also affect information recovery.
SoftBank Mobile is not liable for any resulting damages.
Keep separate copies of contacts, etc.
Opening Received Gmail................................................... 65
Using Internet Mail.......................................................... 66
Web Browsing....................................................................68
60
Messaging
S! Mail
Exchange messages with S! Mail-compatible SoftBank handsets
and e-mail compatible devices (other mobiles, PCs, etc.)
beyond SMS character entry limit; attach media files, etc.
SMS
Exchange short messages with mobiles using handset numbers
as addresses.
Gmail
Gmail is Google's webmail service. Handset automatically syncs
with Gmail.
Internet Mail
Sending S! Mail/SMS
Wi-Fi Connection Setup (upon First Use
of Mail)
Send/receive S! Mail using Wi-Fi. When using Mail (S! Mail/
SMS) for the first time, complete Wi-Fi connection setup as
follows.
・Descriptions for Mail (S! Mail/SMS) are given assuming that
Wi-Fi connection setup is complete.
(Mail) on Navigation Bar
Use Internet Mail (POP3/IMAP4) on handset.
・Set up an Internet Mail account beforehand.
・Retrieving Internet Mail on handset syncs handset and mail
server; received messages are also accessible from PCs.
Wi-Fi connection setting opens.
OK
Wi-Fi connection setup starts.
OK
Wi-Fi connection setup is complete.
・After Wi-Fi connection setup is complete, Wi-Fi is used for
sending/receiving S! Mail. When Wi-Fi is not available, 3G or
4G Network is used.
Sending S! Mail
61
To send S! Mail to a number/address saved in Address Book:
(Mail) on Navigation Bar
Folder list appears.
Create
(Send) on Action Bar
S! Mail is sent.
・Handset saves failed S! Mail messages to Unsent Folder;
automatically attempts redelivery up to two times.
Messaging & Browser
S! Mail Composition window opens.
Address Book
Address Book opens.
Tap recipientOK
・For multiple numbers/addresses, Tap one.
Tap Enter subject fieldEnter subjectNext
Enter message
SoftBank 200SH
62
Sending SMS
To send SMS from sent/received mail records:
(Mail) on Navigation Bar
Folder list appears.
CreateSMS
Opening & Replying to S! Mail/SMS
Handset retrieves S! Mail/SMS messages automatically; set
manual retrieval as needed.
Opening New S! Mail/SMS
When message arrives, handset responds with ringtone/
After entering recipient, subject or message text,
Save draft
・Message is saved to Drafts.
Discarding Messages
After entering recipient, subject or message text,
DiscardOK
Opening Received Gmail
Gmail groups all related messages by subject. (Conversation
View)
Opening New Gmail
When Gmail message arrives, handset responds with ringtone
and Vibration, andappears.
Drag Status Bar down for Notifications Window
Messaging & Browser
Gmail Caution
Gmail messages are not received if recipient device is set
to reject messages sent from PCs.
Tap message notification
Message window opens.
・For two or more new messages, Inbox opens; select one.
SoftBank 200SH
66
Opening Gmail
In application sheet,(Gmail)
Inbox opens.
Tap conversation (subject)
Using Internet Mail
Adding Accounts
Check usernames (user IDs), passwords, server names, etc. of
your Internet Mail accounts beforehand.
In application sheet,(Email)
Account setup menu opens (if no account is set up).
Message window opens.
Replying to Messages
In message window,Complete message
Enter mail address and passwordNext
・To configure incoming/outgoing server settings manually,
Tap Manual setup . Setup procedure may vary by e-mail
service.
Complete account settingsNext
Account settings are complete.
・Procedure may vary by e-mail service.
Enter account name and sender nameNext
Internet Mail setup is complete.
67
Creating/Sending Internet Mail
In application sheet,(Email)
Inbox opens.
Opening New Internet Mail
When Internet Mail message arrives, handset responds with
ringtone and Vibration, andappears.
Drag Status Bar down for Notifications Window
Notifications Window opens.
Tap message notification
Messaging & Browser
Mail Composition window opens.
Complete message
Message is sent.
Message window opens.
・For two or more new messages, Inbox opens; select one.
SoftBank 200SH
68
Opening Internet Mail
In application sheet,(Email)
Inbox opens.
Tap message
Web Browsing
View Internet sites in Browser.
Using Browser
Upon activating Browser, Quick toolbox guidance appears by
default.
・
To disable it thereafter, Tap Don't show again () and
Tap Close .
(Browser) on Navigation Bar
Message window opens.
Browser activates.
・Flick up/down to scroll.
・Internet connection confirmation appears upon Tapping URL
within message text; Tap Yes to activate Browser.
69
Adding Bookmarks
(Browser) on Navigation Bar
Browser activates.
Open target webpageAdd bookmark
Opening Bookmarks
(Browser) on Navigation Bar
Browser activates.
Bookmark list
Messaging & Browser
Add bookmark window opens.
Check/edit label, URL, etc.OK
Current webpage is saved as a bookmark.
Bookmark window opens.
BOOKMARKSTap bookmark
Corresponding webpage opens.
SoftBank 200SH
70
Using History
(Browser) on Navigation Bar
Browser activates.
Bookmark list
Saving Webpages
(Browser) on Navigation Bar
Browser activates.
Open target webpageSave for offline reading
Current webpage is saved.
・
Tapto return.
Bookmark window opens.
HISTORY
Tap item ( Today , etc.)Tap record
Corresponding webpage opens.
・
Frequently visited webpages are saved in Most visited .
Opening New Tabs
Open up to 16 webpages in different tabs to switch between
them easily.
(Browser) on Navigation Bar
Browser activates.
New tab
Another tab opens.
・
To switch tabs, TapTab list in Browser, then Tap
target tab.
SSL & TLS
Secure Sockets Layer (SSL) and Transport Layer Security
(TLS) are encryption protocols that secure Internet
transmissions of important/sensitive information such
as credit card numbers and corporate secrets, providing
protection against online threats (eavesdropping,
falsification, impersonation, etc.).
Browser Operations
Signing in to My SoftBank
Access My SoftBank to check service charges or reward
points, change contract details (subscribed price plan,
optional services, etc.), customize handset address, use
anti-spam settings, etc.
In Browser,Bookmark listMy SoftBank
Follow onscreen instructions
71
Messaging & Browser
Searching for Information
In Browser, Tap URL entry fieldEnter word/phrase
GoTap link
Editing Bookmarks
In Browser,Bookmark listTouch & Hold
bookmarkEdit or move bookmarkEditOK
Deleting Bookmarks
In Browser,Bookmark listTouch & Hold
bookmarkDelete bookmarkYes
Opening Saved Webpages
In Browser,Bookmark listSAVED PAGES
Tap page
SSL/TLS Caution
When a security notice appears upon opening a webpage,
subscribers must decide for themselves whether or not to
open the page. Opening secure pages constitutes agreement
to the terms of SSL/TLS usage. SoftBank Mobile, SHARP
Corporation, VeriSign Japan and Cybertrust cannot be held
liable for any damages associated with the use of SSL/TLS.
In Photo Viewfinder, Drag up/down for Brightness Scale
Adjusting Zoom
In Photo Viewfinder, Drag left/right or Pinch/Spread for
Zoom Slider
・Zoom may be unavailable depending on Picture Size.
Locking Focus
In Photo Viewfinder, Tap subject for focus lock
・External Camera continuously focuses on moving subjects.
・To release shutter, Tap the subject again.
・External Camera uses color to track subjects; may not
correctly track faintly colored subjects or ones similar to
background color.
Opening Captured Photo
In Photo Viewfinder, Tap preview thumbnail
Aim External Camera at subject
・For people, focus automatically locks on detected face.
Camera shutter clicks; photo is saved to SD Card.
Album activates (appears) and photo appears.
Using Internal Camera
Use Internal Camera to capture self or others with Lens on
Display side.
In Photo Viewfinder,
・Tap to toggle Internal/External Camera.
・Some functions/settings are not available for Internal
Camera.
Turning Mobile Light Off/On
In Photo Viewfinder,(Settings)Mobile light
OFF , Auto or ON
Opening Help
In Photo Viewfinder,Help
75
Camera Cautions
General Use
Mind etiquette when using Camera.
Keep Lens Clean
Fingerprints/smudges may hinder handset imaging. Clean
Lens with a soft cloth beforehand.
Avoid Direct Sunlight Exposure
Do not expose Lens area to direct sunlight for extended
periods; may damage color filter, altering images.
Mobile Light Warning
Do not shine Mobile Light in eyes; may affect eyesight,
etc.
Video Camera
Recording Videos
Record MPEG-4/AMR or H.264/AAC videos.
・Available format varies by recording size.
・Insert SD Card beforehand. (Recorded videos are saved to SD
Use household Wi-Fi networks, etc. to connect to the Internet.
Enabling Wi-Fi
In application sheet,(Settings)Wi-Fi settings
Wi-Fi settings opens.
(OFF) on Action Bar
Connecting Selected Access Points
Enable handset Wi-Fi first.
In application sheet,(Settings)
Wi-Fi settings
Wi-Fi settings opens.
Tap access point
Wi-Fi is enabled ().
・
Enabling Wi-Fi disables Wi-Fi direct , if enabled.
・Access point search starts; available access points appear
upon completion.
・
Tapto disable Wi-Fi settings ().
Enter passwordConnect
Connection is established.
・Password (indicated by WEP, WPA, KEY, etc.) may be found
on a label on your wireless LAN router. For details, contact
the vendor of your wireless LAN router. For public wireless
LAN services, check the password with your ISP.
・Password entry omitted for some access points.
83
Disconnecting Wi-Fi
In application sheet,(Settings)
Wi-Fi settings
Using Wi-Fi Direct
Use Wi-Fi Direct to establish a Wi-Fi connection with other
Wi-Fi Direct compatible devices with no need for an access
point or Internet connection.
・Wi-Fi Direct and access point-based Wi-Fi connection cannot
be used simultaneously.
In application sheet,(Settings)Other settings
Network settings
Wi-Fi settings opens.
Tap connected access pointForget
Wi-Fi is disconnected.
・Password entry may be required to reconnect to access
point.
Wi-Fi direct
Wi-Fi Direct is enabled ().
・
When Wi-Fi settings has been enabled, confirmation
appears; Tap OK . ( Wi-Fi settings will be disabled.)
・
To disable Wi-Fi Direct, Tap Wi-Fi direct ().
Connectivity
SoftBank 200SH
84
Wi-Fi Connection
Wi-Fi Direct & Wireless Output
Enabling Wireless output enables Wi-Fi Direct. In this case,
disabling either function disables the other.
Automatic Updates for Optimizing Wi-Fi
Connection
While using Wi-Fi, updates for optimizing connection may
be received or applied automatically.
Wi-Fi Operations
Connecting Access Points Manually
In Wi-Fi settings, ADD NETWORKEnter Network
SSIDDoneTap Security fieldTap security
protocolSave
・Selected security protocol may require other fields to be
completed.
Tethering Option
About Tethering Option
Use handset like a Wi-Fi router to connect to the Internet
from a PC or game device.
・Requires separate subscription.
・Use after confirming that handset is updated to the latest
software.
Starting Up Tethering Option
In application sheet, (Tethering)
Dismissing Access Points
In Wi-Fi settings, Touch & Hold access pointForget
networkYes
Troubleshooting
Q. Cannot detect access points
A. There may be multiple access points using neighboring
channels. In this instance, handset may not detect
access points correctly.
Tethering window appears.
85
Opening Tethering Option Help
(Japanese)
In application sheet, (Tethering)
Tethering window appears.
Help
Bluetooth
Connect handset to other Bluetooth® devices for wireless
connectivity.
®
Bluetooth® Functions
FunctionDescription
Sound outputListen to music, audio, etc. wirelessly.
Handsfree
conversation
File transfer
Enabling Bluetooth
In application sheet,(Settings)Other settings
Use Bluetooth® devices (headset, etc.) for
handsfree conversations.
Transfer files between handset and
Bluetooth® devices.
®
Help window appears.
Follow onscreen instructions
A description of each item appears.
Wi-Fi Connection
After enabling Wi-Fi connection (), it will be
automatically disabled () when no connection is made to
handset for a certain period of time.
Connectivity
Bluetooth
Bluetooth® menu opens.
(OFF) on Action Bar
Bluetooth® is enabled ().
・
Tapto disable Bluetooth® ().
SoftBank 200SH
86
Device Search & Pairing
Pair nearby Bluetooth® devices with handset to transfer files.
・Enable Bluetooth® on handset and set target devices to be
discoverable first.
In application sheet,(Settings)Other settings
Bluetooth
Connecting Paired Bluetooth® Devices
In application sheet,(Settings)Other settings
Bluetooth
Bluetooth® menu opens; found Bluetooth® devices appear
in Available devices field.
・
If target device does not appear, Tap SEARCH FOR
DEVICES to try searching again.
Tap deviceFollow onscreen instructions
Pairing completes; handset connects to paired handsfree
device, etc. automatically.
・Pairing procedure varies by target device.
Bluetooth® menu opens.
・Paired Bluetooth® devices appear in Paired devices field.
Tap device
Tapped device is connected.
87
Sending Files (e.g., Address Book)
In application sheet,(Address Book)
Address Book opens.
Tap tabTap contact
Receiving Files
When file reception request arrives,appears. To receive
files:
Drag Status Bar down for Notifications Window
Tap Bluetooth® transfer notificationAccept
Contact opens.
・Contacts are sorted by the first character of last name
Handset automatically accepts connection requests from
paired devices. For unpaired devices, set handset to be
discoverable first; when connection request arrives, follow
onscreen prompt.
・Description below handset name changes to Visible to
all nearby Bluetooth devices, and handset is set to be
discoverable.
・Handset returns to non-discoverable state automatically
after a certain period of time, and will be hidden from
unpaired devices.
Troubleshooting
Q. Cannot use Bluetooth
A. Airplane mode may be active. Activating Airplane mode
disables Bluetooth®. (Bluetooth® can be enabled again
while Airplane mode is active.)
®
Important Bluetooth® Usage Notes
Connection
Bluetooth® connection may not be possible with some
Bluetooth® devices. Noise may interfere with wireless or
handsfree conversations.
File Transfer
Files may not appear correctly on recipient devices.
Global Services
Global Roaming................................................................. 90
Calling from Outside Japan.............................................92
90
Global Roaming
Handset is Global Roaming Service eligible. Use the same
handset number outside Japan.
Selecting Network Service
Handset connects to 4G or 3G Network service automatically
by default. To change setting according to Network service
provided by target cellular provider outside Japan:
・Use default Network service setting in Japan and other
areas with no GSM Network coverage.
In application sheet,(Settings)
4G/3G/GSM settings
4G/3G/GSM settings opens.
Manual4G/3G/GSM , 4G/3G , 3G/GSM , 3G
or GSM
Other settingsNetwork settings
Mobile networks
Network service is set.
・
To select Network service automatically, Tap Auto .
Selecting a Cellular Provider
91
Handset connects to an appropriate cellular provider
automatically by default. To select a cellular provider
manually:
In application sheet,(Settings)
Other settingsNetwork settings
Tap provider
Cellular provider is set.
・
Tap Select automatically to set an appropriate cellular
provider automatically.
・
Tap Search networks to search for all available cellular
providers.
Mobile networks
Network operators
Global Services
SoftBank 200SH
92
Calling from Outside Japan
See SoftBank Mobile Website for details:
http://mb.softbank.jp/en/global_services/
Access roaming area/rate information or print it out to carry
while traveling abroad.
Calling Japan
(Phone) on Navigation Bar
Call Window opens.
・When Incoming History or Outgoing History opens, Tap
Phone . When missed call window opens, Tapto open a
Phone window.
Calling Landlines & Mobiles within
Current Country
(Phone) on Navigation Bar
Call Window opens.
・When Incoming History or Outgoing History opens, Tap
Phone . When missed call window opens, Tapto open a
Phone window.
Use onscreen dialpad to enter numberCall
Roaming assistant appears.
・Do not add + before the number.
Use onscreen dialpad to enter numberCall
Roaming assistant appears.
・Do not add + before the number.
Japan number
Handset dials the number.
Stay country number
Handset dials the number.
93
Calling Countries aside from Japan
(Phone) on Navigation Bar
Call Window opens.
・When Incoming History or Outgoing History opens, Tap
Phone . When missed call window opens, Tapto open a
Phone window.
Use onscreen dialpad to enter numberCall
Roaming assistant appears.
International Call Operations
Changing Country Codes
In application sheet,(Settings)CallInt'l call
settingsUser listTap country/areaChange
by listTap country/areaRegister
・
Tap Entry direct to enter country name and code
directly.
Deleting Country Codes
In application sheet,(Settings)CallInt'l call
settingsUser listTap country/areaDelete
from list
Enabling/Disabling Abroad Assistant
In application sheet,(Settings)CallInt'l call
settingsAbroad assistant
・
Tap Abroad assistant to toggle Enable () and
Disable ().
・Do not add + before the number.
Other country number
Country code list appears.
Tap country
Global Services
Handset dials the number.
・
When calling SoftBank handsets, always Tap 日本(JPN) .
SoftBank 200SH
94
Settings
About Settings..................................................................96