Socket PocketPak Quick Start Manual

Bar Code Scanning PocketPak

Quick Start Guide

TM

Overview

The Socket Bar Code Scanning PocketPak allows you to scan bar codes
anytime anywhere with any Windows Powered Pocket PC. Just pop in the
scanner when you need it, then pull it out when you’re done. It’s that easy!

Created for busy professionals who need
mobile solutions that are easy and convenient
to use, the PocketPak features the Socket In­Hand Scan Card (ISC), which lets you scan
with one hand.

This Quick Start Guide briefly shows how to
install and use the ISC. For more details (e.g.,
configuring spec ial options) , refer to the

User’s Guide, in Adobe Acrobat PDF format in the Docs folder on the Bar
Code Scanning PocketPak Installation CD.

For software updates, please visit: www.socketcom.com/download.htm
To register your ISC online, please visit: www.socketcom.com/prodreg.htm

To learn about other Socket PocketPaks, visit: www.socketpocketpak.com

Getting Started is Easy!

STEP 1: Install the software.
STEP 2: Insert the ISC.
STEP 3: Start SocketScan.
STEP 4: Assign a t rigger button.
STEP 5: Start scanning data into a Pocket PC program!

STEP 1: Install the Software

1. Make an active connection between your Pocket PC and a host PC. Use
your Pocket PC’s serial or USB connection cable or cradle.

2. Insert the SocketScan Installation CD into the host PC.

3. Click Start/Run on your host PC and type X:\SETUP.EXE (replace X
with your CD drive letter).

4. In the second Setup Center screen, select Install Bar Code Scanning
PocketPak software.

5. Follow the wizard until software installation is done. When you see
Application Downloading Complete, click OK. Remove the serial/USB
cable or cradle.

STEP 2: Insert the In-Hand Scan Card

Use your Pocket PC’s CompactFlash I/O slot. Make sure the white Socket
logo is on top.

STEP 3: Start SocketScan

Go to Start , Programs, then tap on the SocketScan icon:

Whenever SocketSc an is running and the ISC is inserted, the ISC icon
should appear in the Pocket PC task tray (visible from Today):

The “no card detected” icon may denote an improperly inserted card.

STEP 4: Assign a Trigger Button

Follow these steps and refer to your Pocket PC user documentation to assign
a trigger button:

1. Tap Start
on the Program Buttons tab:

, then Settings. Tap on the Personal tab, then Buttons. Tap

2. From the Button list, select a button to trigger the In-Hand Scan Card. In
the Button assignment field, select SocketScan. When done, tap OK.

If SocketScan is not running yet, then pressing the trigger button will
result in launching SocketScan. Otherwise, pressing the trigger button
will fire the laser.

STEP 5: Scan Data into a Pocket PC Program

Follow these steps to use the ISC to scan data into any Pocket PC program.
For information about bar code scanning applications (available separately),
email [e-mail]

1. If not already open, start SocketScan. You can tap on your assigned
trigger button to quickly launch the program.

2. Start the application you want to receive the data, such as Pocket Word
or Pocket Excel. Inside the application, make sure a new document or
spreadsheet is open that you can scan data into.

3. Press your assigned trigger button and scan the bar code. Hold the ISC
3-12 inches away from the bar code. Aim the laser so it spans the entire
width of the code, at a slight angle (45° is optimal). An amber LED
indicates the laser is on.

For example, try the following Code 39 bar code:

Important! Do not look directly into the beam or point it at a person!

4. When data is read, a beep should sound, the laser should turn off, and the
LED should turn green for several seconds, indicating a good read. If the
ISC fails to read data within a few seconds, the amber LED and laser
beam will turn off, and you must try again.

Note: If your Pocket PC enters suspend mode when you are running
SocketScan, press the ON button. SocketScan will reinitialize itself.

5. After a successful scan, data should appear in your document. For
example, if you scan the bar code on the previous page into a Pocket
Excel spreadsheet, data should appear in the first cell:

6. To close SocketScan, tap on the ISC icon in the task tray, then tap Close.

If You Have Trouble…

Refer to the “Troubleshooting” section in the User’s Guide on the
installation CD. If problems persist, contact Socket’s technical support
department prepared with the following:

• The serial number of your ISC

• The Windo ws CE version number on your Pocket PC

• The manufacturer and model number of your Pocket PC

• What you did to try to correct the problem

To reach Socket’s technical support department:

• Email [e-mail]

• Phone [phone]

• Fax [phone]

© 2001 Socket Comm uni cations, Inc. Printed in U.S.A.