Socket CHS 7M, CHS 7P Quick Start Manual

Page 1
QUICK START GUIDE
Bluetooth® Cordless Hand Scanner (CHS)
Series 7 (v3)
This document pertains to the following CHS v3 models:
7M SKU# CX2860-1296 (P/N 8550-00057)
7P SKU# CX2862-1298 (P/N 8550-00058)
The part number (P/N) is labeled inside the battery compartment.
© 2010-2013 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, SocketScan, Socket Bluetooth Cordless Hand Scanner, and Business Mobility Now! are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks and trade names contained herein may be those of their respective owners.
LED
Trigger button
Power button
Stylus tip
Page 2
2
PACKAGE CONTENTS
Socket Bluetooth Cordless Hand Scanner (CHS)
Lanyard / belt clip with retractable tether
Rechargeable batteries (2)
AC adapter with international plugs
USB to DC plug cable
CD with software and documentation
HELPFUL RESOURCES
Software and Documentation Downloads:
There may be updates to the software and manuals included in the package. Download the latest from: http://www.socketmobile.com/support/downloads/
User’s Guide: Available on the SocketScan 10 CD or download (see URL above).
Command Barcodes Sheet: Enables scanner configuration. Many command
barcodes are at the end of this Quick Start Guide. For a full set, download the Command Barcodes Sheet.
Product Registration:
Need technical support? Want to opt-in for special offers? Register your product online: http://support.socketmobile.com/
Alternatively, if you install SocketScan 10 software, you can use it to register the CHS.
Technical Support:
Online Knowledge Base: http://support.socketmobile.com/EU_S1a.asp
Online Requests: Register to submit an inquiry. http://support.socketmobile.com
Phone: +1-510-933-3020 USA/Canada 800-279-1390 EU +49 9401 5299 036
Software Development Kit:
SocketScan 10 SDK enables developers to embed support for the CHS into their Apple iOS*, Android, BlackBerry and Windows applications. Learn more at:
http://www.socketmobile.com/Support/developer/SocketScan/
Thank you for choosing Socket Mobile!
*CHS 7M & 7P only work in HID mode with iOS. For iOS apps developed with SDK, use CHS 7Ci, 7Di, 7DiRx, 7Xi or 7XiRx.
Page 3
3
SCANNER SETUP
Insert the Batteries:
Unlock the battery cover by using a screwdriver or coin to turn the lock under the CHS to a horizontal position. Remove the cover.
Install the batteries in their correct position as indicated by the +/- symbols. You may also want to attach the tether (see below). Replace the battery cover and turn the lock to a vertical position.
IMPORTANT! Only use NiMH batteries.
Attach the Tether
(Optional): After removing the battery cover, wrap the string loop of the tether around the inside part of the lock. Replace the battery cover and lock it by turning the lock into a vertical position. If desired, attach the tether to a lanyard or belt.
Charge the CHS:
The CHS must be fully charged before first use. Initial charging takes about 5 hours. For the 7P, lift the rubber flap to access the power connector.
Red LED = Charging
Green LED = Fully charged
Besides the included AC adapter and USB to DC plug cable, Socket offers optional charging cradles (sold separately).
Cradle for CHS 7M: SKU# AC4054-1381
Cradle for CHS 7P: SKU# AC4055-1382
http://ww1.socketmobile.com/products/bluetoot h-scanners/accessories-bt.aspx
STYLUS TIP
Built-in Touch Screen Stylus:
Use on Pocket PC / other resistive device touch screens.
Do not use a damaged stylus, as it may scratch the screen. Do not use on iPad, iPhone, iPod touch or other capacitive screen devices.
Page 4
4
BASIC FUNCTIONALITY
Powering ON:
Press and hold down the small power button until the LED turns blue and the CHS beeps twice (low-high).
Powering OFF / Disconnecting:
Press and hold down the small power button until the CHS beeps twice (high-low).
Scanning Barcodes:
After connecting the CHS to your device, open an application. Put the cursor where you want to enter data.
Hold the CHS about 4 inches (10 cm) from the barcode and press and hold the trigger button. Position the CHS so the red beam covers the entire width of the barcode.
By default, the CHS will beep and the LED will flash green to confirm that data was decoded and sent to the host device. The 7P will also vibrate.
BLUETOOTH PAIRING
Automatic Reconnections:
After you power on the CHS, it will automatically try to connect to the last device it paired and connected to. Make sure the device is in range with Bluetooth enabled. If using SPP mode, make sure your device is running SocketScan 10 software or a SocketScan 10 SDK enabled application.
If the CHS is connected to a device and gets disconnected, it
will try to reconnect for a few minutes. Make sure the device is on and in range. If the CHS cannot reconnect, it will emit a long beep. Press the trigger button to restart the reconnection process.
Unpairing the CHS: Deleting the Bluetooth Pairing
In most cases, if the CHS is paired with a device, you should unpair it before trying to connect to a new device.
Power on the CHS. Press and hold down the trigger button.
Press and hold down the power button. After you hear 3 beeps, release both buttons. The CHS will unpair and automatically power off. The next time you power on the CHS, it will be discoverable.
Page 5
5
HID VS. SPP MODE
The CHS v3 supports two kinds of Bluetooth connections:
Human Interface Device (HID):
Default mode of CHS. No software installation required.
Serial Port Profile (SPP):
Highly recommended, allows two-way communications. Software installation required.
Check the chart to see which mode works with your OS.
OS
Apple iOS
Mac OS
Android OS
Windows
Embedded / PC
BlackBerry
OS
Most Other
OS*
HID
2.2 and later
with HID support
SPP
2.1 and later
By default, the CHS is set to HID mode for Keyboard devices, which requires no
software installation.
For easiest setup, choose HID mode if supported by your device:
1. Install and charge
batteries.
2. Connect scanner.
3. Scan barcodes.
To learn how to connect by scanning a custom barcode, please refer to the User’s Guide.
To change modes, use command barcodes (page 11). Learn more about HID and SPP at:
http://www.socketmobile.com/pdf/techbrief/socketscan-10-sdk_white-paper.pdf
*Includes Windows RT, Linux, etc.
BLUETOOTH DEVICE IDENTIFICATION
When connecting your CHS to a device, you may need the following information to identify your scanner:
Bluetooth Friendly Name (Default): Socket CHS [XXXXXX] The characters in brackets are the last 6 characters of the CHS Bluetooth Device Address (BDA).
Bluetooth Device Address (BDA): XX:XX:XX:XX:XX:XX The Bluetooth Address is labeled in the CHS battery compartment and helps identify your CHS from other CHS scanners.
Page 6
6
APPLE IOS / MAC OS
HID (KEYBOARD) MODE
The CHS 7M and 7P only work in Bluetooth HID mode with Apple devices. For a Bluetooth SPP connection with iOS devices, use the CHS 7Ci, 7Di, 7DiRx, 7Xi or 7XiRx and a compatible application developed with SocketScan 10 SDK.
To pair the CHS with the Apple device: (required only the first time you connect)
1. Power on the CHS.
2. By default, the CHS is set to HID Keyboard mode. If the mode was changed, use the
appropriate command barcode at the end of this guide to set it to HID Keyboard mode.
3. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
4. In the list of found devices, select Socket CHS. If prompted, tap Pair.
5. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
To access the onscreen keyboard while connected to the CHS:
This feature is supported by Revision B or later of the CHS 7M and 7P. To see a video demonstration, visit: http://www.youtube.com/socketmobile#p/u/5/VhtttoC6ROs
1. Make sure the CHS is connected to your Apple device.
2. Open your application and place the cursor where you want to enter data.
3. Quickly double-press the power button of the CHS (like double-clicking a mouse) to
open or close the onscreen keyboard.
Page 7
7
ANDROID OS
SPP MODE
Compatible with Android OS 2.1 and later. For Bluetooth HID instructions, please see User’s Guide.
To install the software:
1. If you installed barcode scanning software for your phone camera, scan
this barcode to launch the SocketScan 10 page in Android Market.
Alternatively, open Android Market or Amazon Appstore for Android and search for SocketScan.
2. Follow the on-screen instructions to download and install SocketScan 10 software.
If prompted, allow the application to access Bluetooth connections and settings and/or modify USB storage / SD card contents.
To pair and connect the CHS and Android device: (required only the first time you connect)
1. Power on the CHS. Scan this barcode to change the CHS to SPP mode. The CHS will beep 3
times.
2. Turn on Bluetooth on your Android device. Make sure it is Discoverable and start a device
search / scan for devices.
3. In the list of found devices, touch Socket CHS. If a pop-up appears, touch Pair &
connect. If prompted for a passkey, enter 0000 (four zeroes).
4. Touch Home | Menu | Settings | Language & keyboard or Locale & text. Make
sure SocketScan 10 is selected.
5. Open SocketScan 10 . For some devices, an icon will appear on the Home screen.
For other devices, touch Menu and open Apps / Programs.
6. A message will tell you to enable SocketScan 10 as your input method. Touch Back .
7. Touch Menu | Input Method. Make sure SocketScan 10 is selected.
8. Touch Menu | Socket EZ Pair. Touch 1D Scanner. In the device list, touch Socket CHS.
9. After the CHS connects and is ready to scan barcodes, it will beep once. The icon at the
top of the screen will also change (see below). Touch Back
.
Status Bar Icon
CHS not connected.
CHS connected.
10. A CHS registration icon will also appear on top of the screen. If desired, swipe it
down to open the software and register your CHS.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
Print page to scan.
Do not scan onscreen.
Page 8
8
WINDOWS EMBEDDED HANDHELD
SPP MODE
Works with Windows Embedded Handheld 6.x with Microsoft / Broadcom Bluetooth stack.
For the Socket SoMo 655 or SoMo 650 Service Pack 8 or later, SocketScan 10 is pre-loaded. To install, in the Today screen, tap Getting Started. Select the option to install SocketScan 10.
For CAB installation instructions, please refer to the User’s Guide.
To install the software:
1. Enable Bluetooth on your PDA.
2. Use a cable / cradle and Windows Mobile Device Center software 4.5 or later to make
an active connection between your PDA and a computer.
3. Insert the SocketScan 10 installation CD into your computer and follow the instructions
to install the software for Windows Mobile. When prompted to reset, tap Yes.
To pair the CHS with the PDA: (required only the first time you connect)
1. Power on the CHS. Scan this barcode to change the CHS to SPP mode. It will beep 3 times.
2. Use your Bluetooth software to start a device search / add a device. Make sure the PDA is
Discoverable (visible).
3. In the list of found devices, select Socket CHS. If prompted for a passkey, enter 0000
(four zeroes).
If prompted, choose the service Socket Serial Port. Select an available COM for the CHS.
For Microsoft Bluetooth stack (e.g., SoMo), after pairing, in Bluetooth Settings, tap the COM Ports tab. Add an outgoing COM port for the CHS.
4. Make sure SocketScan 10 is running.
Tap Start | Settings | SocketScan 10 folder | SocketScan 10
.
5. In the Today screen, tap on the SocketScan 10 icon in the task tray. In the pop-up
menu, tap SocketScan 10 Settings. Make sure an available COM is selected. Tap ok.
6. Click on the SocketScan 10 icon in the task tray. In the pop-up menu, click Socket EZ
Pair. Click 1D Scanner. Select your CHS and click Pair.
7. The PDA will connect to the CHS, indicated by a beep. The CHS will then disconnect from
the computer, indicated by two beeps. Click OK.
8. After the CHS connects and is ready to scan barcodes, it will beep once. The task tray
icon will also change (see below).
9. Close Socket EZ Pair. The Registration screen will appear. If desired, register your CHS.
Task Tray Icon
(in Today screen)
CHS not connected.
CHS connected.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
Print page to scan.
Do not scan onscreen.
Page 9
9
WINDOWS PC
SPP MODE
To install the software and configure a COM port:
1. Insert the SocketScan 10 installation CD into your computer and follow the instructions
to install the software for Windows Desktop.
2. When prompted to configure a Bluetooth COM port, click Yes.
3. In SocketScan 10 Settings, select an incoming Bluetooth serial COM port. Click OK.
Click Ports to create a new incoming COM port or identify an incoming COM port.
4. At the end of the installation wizard, click Finish. If prompted, restart the PC.
5. Windows Vista only: Right-click on the SocketScan 10 desktop icon. In the pop-up
menu, click Properties | Advanced. Select Run as administrator and click OK.
To pair the CHS with the PDA or PC: (required only the first time you connect)
1. Power on the CHS. Scan this barcode to change the CHS to SPP mode. It will beep 3 times.
2. Use your Bluetooth software to start a device search / add a device. In the list of found
devices, select Socket CHS. If prompted for a passkey, enter 0000 (four zeroes).
If prompted, choose the service Socket Serial Port. Select an available COM for the CHS.
3. Make sure SocketScan 10 is running. Click on the SocketScan 10 desktop icon .
4. Click on the SocketScan 10 icon in the task tray. In the pop-up menu, click Socket
EZ Pair. Click 1D Scanner. Select your CHS and click Pair.
5. The PC will connect to the CHS, indicated by a beep. The CHS will then disconnect from
the computer, indicated by two beeps. Click OK.
6. After the CHS connects and is ready to scan barcodes, it will beep once. The task tray
icon will also change (see below).
7. Close Socket EZ Pair. The Registration screen will appear. If desired, register your CHS.
Task Tray Icon
CHS not connected.
CHS connected.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
Print page to scan.
Do not scan onscreen.
Page 10
10
WINDOWS PC OR EMBEDDED HANDHELD
HID (PERIPHERALS) MODE
To pair the CHS with the PC or PDA: (required only the first time you connect)
1. Power on the CHS.
2. Scan this barcode to configure the CHS to work in HID mode for peripherals. The CHS
will beep 3 times.
3. Turn on Bluetooth on your PC or PDA and start a device search / add a new device.
4. In the list of found devices, select Socket CHS. If prompted for a passkey, enter 0000
(four zeroes). If prompted to select services, select Input Device.
5. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
BLACKBERRY OS
SPP MODE
SocketScan 10 software works with BlackBerry OS 5.0.0.714 or later for Bold 9700. Other phones may be compatible. To install via BlackBerry Desktop Software, or for instructions for the PlayBook, please refer to the User’s Guide.
To install the software: On your phone, open http://www.socketmobile.com/blackberry Follow the onscreen instructions to download and install the software.
To pair the CHS with the phone: (required only the first time you connect)
1. Power on the CHS. Scan this barcode to change the CHS to SPP mode. The CHS will
beep 3 times.
2. Use the phone’s Bluetooth software to start a device search / add a device. In the
device list, select Socket CHS. If asked for a passkey, enter 0000 (four zeroes).
3. In the Home screen, click Downloads | SocketScan 10. If prompted to grant trusted
application status, click Yes.
4. Click Menu | Socket EZ Pair. Click 1D Scanner. If prompted, select your CHS.
5. After they pair and connect, the CHS will beep once to confirm the connection, then
beep twice to signal a disconnection. Click Menu | Close to close Socket EZ Pair.
6. SocketScan 10 will try to connect to the CHS. If asked to confirm, click Yes.
7. After the CHS connects and is ready to scan barcodes, it will beep once.
8. Click Menu | Close. The registration screen will appear. If desired, register your CHS.
Now you are ready to scan barcodes, see instructions on page 4.
Print page to scan.
Do not scan onscreen.
Print page to scan.
Do not scan onscreen.
Page 11
11
COMMAND BARCODES
Print out and scan command barcode(s) to quickly configure the CHS.
Make sure the CHS is not connected to a host computer or device before scanning a command barcode!
Print out sheet before scanning, do not scan barcodes onscreen!
To use the CHS on multiple hosts, perform the unpair sequence. For instructions, see page 4.
By default, the CHS is in HID mode as a Keyboard device.
For a complete set of command barcodes, please download the Command Barcodes Sheet:
http://www.socketmobile.com/pdf/data-collection/command-barcodes-sheet-v3.pdf
Bluetooth Connection Modes
SPP Mode
Changes the CHS to Serial Port Profile (SPP) mode.
Required for BlackBerry, optional for Windows and Android.
HID-Keyboard (default)
Configures the CHS to Human Interface Device (HID) mode as a Keyboard class device.
Required for Apple iOS, Mac OS.
HID-Peripheral
Changes a CHS to HID mode as a Peripheral class device.
Optional for Windows and Android.
Factory Defaults
Factory Reset
Configures the CHS to revert all settings to factory defaults. The CHS will power off after scanning this barcode.
Page 12
3/2013 Printed in USA 6430-00327 J
Beep Settings
Beep after CHS Decodes Data ON (default)
Enables CHS to beep to indicate successful scans.
Beep after CHS Decodes Data OFF
Disables CHS from beeping
to indicate successful scans.
Beep after Host Receives Data ON (default)
Enables CHS to beep after a host computer or device acknowledges a successful scan.
Scan with CHS in SPP mode.
Beep after Host Receives
Data OFF
Disables CHS from beeping after a host computer or device acknowledges a successful scan.
Scan with CHS in SPP mode.
Apple iOS Keyboard (only for HID mode)
Double-Press to Open Onscreen Keyboard
Enables CHS to open iOS onscreen keyboard after CHS
power button double-press
Opens iOS Keyboard - With Beep (default)
Opens iOS Keyboard – No Beep
Disable Double Press
Disables double press feature for the CHS.
Loading...