COMMAND BARCODES
1D IMAGER MODELS - 7Ci, 7Di, D700, S800
This document pertains to the following 7Ci, 7Di, D700, S800:
The part number (P/N) is labeled inside the battery compartment for the CHS 7 Series.
Model P/N
7Ci Blue 8550-00071
7Ci Gray 8550-00062
7Ci Green 8550-00088
7Ci Red 8550-00070
7Ci White 8550-00073
7Ci Yellow 8550-00068
D700
D700
Ci
Di
Model P/N
7Di Gray 8550-00065
Model P/N
D700 Gray 8550-00094
D700 Safety Green
D700 Caution Cone Orange
Model P/N
S800 Black 8550-00069
TABLE OF CONTENTS
Advanced Users Only —8
Apple iOS Onscreen Keyboard —8
Automatic Reconnection Settings —11
Bluetooth Connection Mode —4
Bluetooth Connection Mode —10
Bluetooth Connection Roles —10
Data Mode - For SPP Mode Only —11
Data Sufx —5
Factory Defaults —3
HID Keyboard Language Settings —7
Power Button Double key Press —12
Rumble/Beep Modes —6
Scanner Engine Command Barcodes —13
INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
FACTORY DEFAULTS
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
Make sure the scanner is not connected to a host computer or device before scanning a
command barcode!
To use the scanner on multiple hosts, perform the unpair sequence.
1. Power on the scanner.
2. Press and hold down the trigger button.
3. Press and hold down the power button.
4. After you hear 3 beeps, release both buttons.
By default, the scanner is in Basic Mode (HID) as a Keyboard device.
For scanners in Application Mode (SPP) or Application Mode (MFi-SPP), you can alternatively congure some settings by using the Scanner Settings app. You can download the app from iTunes, and Google
Play.
Factory Reset
Congures the CHS to revert all settings to factory defaults. The CHS powers off after scanning this barcode.
#FNB00F0#
3
BLUETOOTH CONNECTION MODE
All Bluetooth connection modes OK.
Scan command barcode(s) to quickly congure the scanner. By default, the scanner is in Basic Mode (HID)
as a Keyboard device.
IMPORTANT! Make sure the scanner is not connected to a host computer/device before scanning a command barcode!
Basic Mode (HID) (default)
Congures the scanner to Human Interface Device (HID) mode. The scanner will be discoverable as a Keyboard to other Bluetooth devices.
Required for Apple iOS, Mac OS.
#FNB00F40001#
HID-Peripheral
Congures the scanner as a Peripheral class device (optional for Windows and Android).
#FNB0001000500#
Application Mode (SPP)
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode (optional for Windows and Android).
#FNB00F40000#
Application Mode (MFi-SPP)
Changes the scanner to Application Mode (MFi-SPP) (equivalent to SPP mode).
#FNB00F40002#
4
All Bluetooth connection modes OK.
DATA SUFFIX
You can congure the scanner to automatically add a sufx and/or prex to each scan of data.
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Sufx – Carriage Return (default)
Congures the scanner to add a carriage return after decoded data.
#FNB00F50BC6048FFEE1680DE040000#
Sufx – Tab
Congures the scanner to add a tab after decoded data
#FNB00F50BC60408FFEE016809EB040000#
Sufx – Carriage Return & Line Feed
Congures the scanner to add a carriage return and line feed after decoded data.
#FNB00F509C60408FFEE01EB010000#
Data As Is
Congures the scanner to return only the decoded data (i.e., no prex or sufx).
#FNB00F509C60408FFEE01EB00000#
5
All Bluetooth connection modes OK.
RUMBLE/BEEP MODES
IMPORTANT! Make sure the scanner is not connected to a host computer before scanning a command barcode.
Vibrate “On”
Enables scanner to vibrate to indicate successful scan
#FNB01310001000100FA0000#
Vibrate “Off”
Disables scanner from vibrating to indicate successful scan
#FNB013100010000#
Beep “On”
Enables scanner to beep to indicate successful scan
#FNB01190E000100030078004B#
Beep “Off”
Disables scanner from beeping to indicate successful scans
#FNB01190E000100000078004B#
6
Scan only with scanner in Basic Mode (HID).
HID KEYBOARD LANGUAGE SETTINGS
Scan barcode to enable language.
English (Default)
French
#FNB01430001#
#FNB01430002#
German
Spanish
#FNB01430003#
#FNB01430004#
7
Scan only with scanner in Basic Mode (HID).
APPLE iOS ONSCREEN KEYBOARD
ADVANCED USERS ONLY
Apple iOS Onscreen Keyboard and Beep Enabled (Default)
Congures the scanner to activate the iOS onscreen keyboard when connected to an iOS device and the
scanner power button is double-pressed.
Disable both Onscreen Keyboard and Beep
#FNB013A0000000000000000000000000000#
Enable Beep
#FNB013A0500000000000000000000000000#
Disable Beep
#FNB013A0100000000000000000000000000#
All Bluetooth Connection Modes OK.
*Barcodes only work for 7M and above. For 7M and below refer to page 4.
Basic Mode (HID) (default)
Congures the scanner to Basic Mode (HID) Human Interface Device. The scanner will be discoverable as a
Keyboard to other Bluetooth devices.
Required for Apple iOS, Mac OS, Nokia E71.
#FNB00F40001#
8
Basic Mode (HID) Keyboard (default)
Changes a scanner in HID-Peripheral mode to HID-Keyboard mode.
Required for Mac OS and Nokia E71, optional for Apple iOS.
#FNB0001000540#
Basic Mode (HID) Peripheral
Changes a scanner in HID-Keyboard mode to HID-Peripheral mode (optional for Windows and Android).
#FNB0001000500#
Application Mode (SPP)
Congures the scanner to Serial Port Prole (SPP) mode.
Required for BlackBerry, optional for Windows and Android.
#FNB00F40000#
Application Mode (MFi-SPP)
Changes a scanner to Application Mode (MFi-SPP).
Required for Apple iOS applications developed with SocketScan 10 SDK.
#FNB00F40002#
9
All Bluetooth Connection Modes OK.
BLUETOOTH CONNECTION MODE
BLUETOOTH CONNECTION ROLES
Advanced users only.
SPP Acceptor Mode
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode as an acceptor (waits for computer / device to initiate connection).
#FNC SPP Acceptor 000000000000#
SPP Initiator Mode
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode as an initiator. Use barcode generating
software or website (e.g., http://barcode.tec-it.com) to create a barcode with the following data:
#FNC SPP Initiator aabbccddeeff#
Where aabbccddeeff is the Bluetooth Device Address of the computer / device you want to connect the
scanner to.
Recommended barcode (module) width: 2-3cm
N/A
Scan only with scanner in Application Mode (SPP) or Application Mode (MFi-SPP)
Advanced users only.
Acceptor (default)
Congures the scanner to accept a Bluetooth connection puts the scanner in discoverable mode.
#FNA#
Initiator
Congures the scanner to initiate a connection to a computer/device with the Bluetooth Device Address
specied in the barcode.
The barcode must be formatted in Code 128 and contain the data #FNIaabbccddeeff# such that aabbccddeeff is the Bluetooth Device Address of the computer/device you want to connect to the scanner. Required for Windows when using SPP mode.
You must create a custom barcode for each computer/device that you want to connect to the scanner.
Use barcode generating software or website (e.g., http://barcode.tec-it.com))
10
DATA MODE - FOR SPP MODE ONLY
All Bluetooth Connection Modes OK.
AUTOMATIC RECONNECTION SETTINGS
Advanced users only.
Packet Mode (default)
Congures the scanner to transmit decoded data in packet format.
#FNB013401#
Raw Mode
Congures the scanner to transmit decoded data in raw (unpacketed) format. Do not scan this barcode in
Application Mode (MFi-SPP).
#FNB013400#
All Bluetooth Connection Modes OK.
Important! After scanning this command barcode, power off and power on the scanner to make sure it is
congured properly.
Enable Automatic Reconnection from scanner (default)
Congures the scanner to automatically initiate a connection to the last paired computer/device after the
scanner is powered on.
Disable Automatic Reconnection from scanner
Congures the scanner to wait for a computer/device to initiate a Bluetooth connection after the scanner
is powered on.
1111
For Basic Mode (HID) only
POWER BUTTON DOUBLE KEY PRESS
Scanner Engine Command Barcodes
Ctrl + Z
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
Ctrl + A
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
Shift + Tab
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
12
12
SCANNER ENGINE COMMAND BARCODES
Ctrl + S
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
Make sure the scanner is not connected to a host computer or device before scanning a command
barcode!
To use the scanner on multiple hosts, perform the unpair sequence. For instructions, see User’s
Guide.
By default, the scanner is in Basic Mode (HID) as a Keyboard device.
You may want to cover adjacent barcodes before scanning a command barcode to prevent scanning
the wrong code.
For scanners in Application Mode (SPP) or Application Mode (MFi-SPP), you can alternatively congure
some settings by using the Scanner Settings app.
13
14
UPC/EAN
Enable/Disable UPC-A
Parameter # 0x01
To enable or disable UPC-A, scan the appropriate bar code below.
*Enable UPC-A
(0x01)
Disable UPC-A
(0x00)
Enable/Disable UPC-E
Parameter # 0x02
To enable or disable UPC-E, scan the appropriate bar code below.
*Enable UPC-E
(0x01)
Disable UPC-E
(0x00)
Enable/Disable UPC-E1
Parameter # 0x0C
To enable or disable UPC-E1, scan the appropriate bar code below.
NOTE: UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
Enable UPC-E1
(0x01)
*Disable UPC-E1
(0x00)
Enable/Disable EAN-8
Parameter # 0x04
To enable or disable EAN-8, scan the appropriate bar code
below.
15
*Enable EAN-8
(0x01)
Disable EAN-8
(0x00)
Enable/Disable EAN-13
Parameter # 0x03
To enable or disable EAN-13, scan the appropriate bar code below.
*Enable EAN-13
(0x01)
Disable EAN-13
(0x00)
Enable/Disable Bookland EAN
Parameter # 0x53
To enable or disable EAN Bookland, scan the appropriate bar code
below.
16
17
Enable Bookland EAN
(0x01)
*Disable Bookland EAN
(0x00)
NOTE: If you enable Bookland EAN, select a Bookland ISBN Format on page 49. Also
select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN
Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN
Supplementals on page 50.
Bookland ISBN Format
Parameter # 0xF1 0x40
If Bookland EAN is enabled, select one of the following formats for Bookland data:
Bookland ISBN-10 - The digital scanner reports Bookland data starting with
978 in traditional 10-digit format with the special Bookland check digit for
backward-compatibility. Data starting with 979 is not considered Bookland in
this mode.
Bookland ISBN-13 - The digital scanner reports Bookland data (starting with
either 978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13
protocol.
NOTE: For Bookland EAN to function properly, ensure Bookland EAN is enabled (see
Enable/Disable Bookland EAN), then select either Decode UPC/EAN Supplementals,
Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental Mode in
Decode UPC/EAN Supplementals.
Loading...