Easy Wireless Controller (EWC)
無線控制器
EWC-100 & EWC-100-62W
EWC-100 & EWC-100-62W
系列
Quick Installation Guide
快速安裝指南
Rev. 1.0 Aug. 2017
EN
Contents of Packing
Open the shipping carton and carefully unpack its
contents. The carton should contain the following items.
1. EWC-100 series device x 1
2. DC Power adapter (w/ AC power cord):
Power adapter (AC input:100-240v/0.5A, 50/60Hz,
DC output: 12V/1A) for EWC-100
Power adapter (AC input: 100-240v/1.2A, 50/60Hz,
DC output: 54V/1.67A) for EWC-100-62W
3. Rack mount kit x 1
4. Rubber Footpads x 4
5. Quick Installation Guide QR cod card x 1
♦ Install the EWC device in a suitable temperature / humidity
environment.
♦ The power outlet should be within 1.82 meters (6 feet) of
the EWC device.
♦ Make sure that there is proper heat dissipation and
adequate ventilation around the EWC device.
♦ Do not place any heavy objects above the EWC device.
♦ Users can check more technical specications from
http://www.soarnex.com if necessary.
!
NOTE:
EN
LED Indicators
EWC-100
Front Panel
EWC-100-62W
LED Indicator Color Status Description
Power
Green
Solid light Power on
Blinking System boot up
Off Light off Power o
USB
Green Solid light When USB flash disk plug in
Off Light off No USB flash disk plug in
LAN
(EWC-100)
Green Solid light
The port is transmitting or
receiving data
Off Light off No link
Upper LED
1-5 (LAN)
(EWC-100-62W)
Green Blinking
The port is transmitting or
receiving data
Off Light off No link
The LEDs of the switch are located on the front panel.
POWER / SYSTEM LAN
EWC-100
1 2 3 4 5
POE
MAX
EWC-100-62W
EN
LED Indicator Color Status Description
Lower LED
1-4 (PoE)
(EWC-100-62W)
Green Solid light
The PoE port has supplied
power normally
Off Light off
There is no PoE power device
(PD) connection
PoE Max
(EWC-100-62W)
Amber Solid light
When the total PoE output
power achieve Guard Band
Off Light off
System still have power for
new PD
Please check the detailed specification from
http://www.soarnex.com if necessary.
EN
EWC-100
Rear Panel
EWC-100-62W
K-Lock,anti-theft to prevent or deter the unauthorized appropriation.
For rmware upgrade, backup/ restore conguration functions.
EWC-100DC power socket accepts unput power
12V/1A.
EWC-100-62W DC power socket accepts unput
power 54/1.67A.
On/ O Power switch (for EWC-100)- Push the controller
On/ O push button to turn your controller “On”
(Inner position) or “O” (Outer position).
Reset button- Press and hold this button for 15
seconds and release to reset the controller to
factory defaults. The ports LEDs will trun off to
indicate that the reset was initiated.
USB
DC
IN
DC
IN
RESET
12345RESETUSB
DC
IN
12345RESETUSB
DC
IN
EN
Side Panel
The left and right side panel of the EWC device have heat vents
to dissipate heat.
• Do not block these openings, and leave at least 10cm to make
sure that the environment is well ventilated.
EN
29072466E1062W0
Hardware Installation
1. Attach the rubber footpads to the recessed area on
the bottom of the EWC device.
2. Place the EWC device on a at desk or shelf.
5. Plug the power cord into the power socket of the
EWC device.
3. Attach the mounting brackets on the both sides of
the EWC device and secure them with the screws.
4. Then, mount the EWC device to a rack with the screws.
1 2 3 4 5
POWER MAX
EP100-05-31
POWER / SYSTEM LAN
EWC-100
1 2 3 4 5
POWER MAX
EP100-05-31
POWER / SYSTEM LAN
EWC-100
1 2 3 4 5
POWER MAX
EP100-05-31
POWER / SYSTEM LAN
EWC-100
EN
6. Keep enough ventilation space between the EWC
device and the surrounding objects.
7. Connect your wireless access points.
RADIUS DHCP
WAN
EWC-100-62WEWC-100
PoE Switch
Access Point
Access Point
LAN
w/ DHCP Serverw/ DHCP Server
LAN
EN
Conguration
How to congure the EWC device via WEB brower is
shown as below:
• Please make sure the computer MUST be set on the same
IP Subnet (same as the IP address of tyhe EWC device)
• For example, the default IP address of the EWC device
is 192.168.1.100 with subnet mask 255.255.255.0, then
the computer should be set 192.168.1x (where x is a
number between 1-254, expect 100)with subnet mask
255.255.255.0.
EN
Conguration
1. Login the EWC device via browser
Open your web browser and enter http://192.168.1.100
(the factory-default IP address) to access the WEB
platform. Default User Name and Password of the EWC
device are “admin”.
Note,You can congure the EWC device by entering the
User Name/Password and IP Address via WEB platform.
2. Recovering Back to Factory Default Conguration
If you’ve forgotten the User Name or Password or IP
Address which has been changed, and then you can
reset it to factory default settings through console
port. After the EWC device has rebooted, you can login
the EWC device via web browser and enter IP Address
http://192.168.1.100 with the default User Name/Pass-
word (the factory-default is “admin”).
EN
Declaration of conformity
FCC Warning
CE Mark Warning
Declaration
This is a Class A product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
This product is here with conrmed to comply with Directive of 2004/108/EC and
2006/95/EC. I here by declare that the products and devices mentioned above
are consistent with the standards and provisions of the guidelines.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user’s guide, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interfence at his own expense. Change
or modifications not expressly approved by the party responsible for
compliance could void the user‘s authoruty to operate the equirments.
1. EP100-05-31 and EP100-08-31: Up to 31 Watts for port1~port4 and the
maximum total PoE power budget of 31 Watts.
2. EP100-08-62: Up to 62 Watts for port1-port4 and the maximum total PoE
power budget of 62 Watts.
3. EP100-08-31: 4 x Gigabit PoE RJ-45 ports(port1~4, provides up to 15.4 watts)
and 4 x Gigabit RJ-45 ports.
4.EP100-08-31: 4 x Gigabit PoE/PoE+ RJ-45 ports(up to 30 watts) and 4 x
Gigabit RJ-45 ports.
CAUTION
中
EN
QIG Download Page
29072466E1062W0
www.soarnex.com
Loading...