Snugpak Ionosphere User Manual

Assembly Instructions for the IONOSPHERE

™

™

IONOSPHERE

A Spacious one person

lightweight compact

modular shelter / tent

The Ionosphere™ can be used without the

for those nights when you may want to sleep
under the stars or just need protection from
the pests and not the elements.

WARNING:

KEEP ALL FLAME AND HEAT SOURCES

AWAY FROM THIS TENT FABRIC. THIS TENT

MEETS THE FLAMMABILITY REQUIREMENTS

OF CPAI-84. THE FABRIC MAY BURN IF LEFT

IN CONTINOUS CONTACT WITH ANY FLAME

SOURCE. THE APPLICATION OF ANY

FOREIGN SUBSTANCE TO THE TENT FABRIC

MAY RENDER THE FLAME-RESISTANT

PROPERTIES INEFFECTIVE.

Large Curved Pole

x1

Small Curved Pole

x1

Grey Tipped

x16

Additional Ultralight Alloy Original Stakes can be purchased separately. Aftermarket stakes can also be

used with this tent whether it be with the loop webbing or through the secondary grommet available.

Alloy Stakes

2 3

1

a. Take out the main body (Inner Tent / Mosquito Netting) and unfold and spread it out.
b. Assemble Pole Sections - Carefully unfold the pole sections and allow them to slide
together by inserting within one another.
c. Insert the poles into the pole sleeve channels
(we

recommend to always push poles through, do not pull through sleeve channels).

Waterloo Mills, Howden Road

Tel: [phone] Fax: [phone]

Snugpak LTD

Silsden, West Yorkshire

BD20 0HA, England

www.SNUGPAK.com

Snugpak® products are exclusively

distributed in North & South America by:

Proforce Equipment, Inc.

3230 Executive Way - Miramar, FL 33025

www.ProforceEquipment.com

Ph: 305.436.7984 / 800.259.5962

www.SNUGPAKUSA.com

a. Insert the tent pole ends into the grommets in the corresponding webbing straps.
b. Once all the pole ends are inserted into the grommets then take the Ultralight Alloy
Stakes that came with the Ionosphere™ and stake down the corners and the webbing
straps with grommets. Add additional stakes to other stake points as needed.
(

Note: there is a secondary grommet on webbing strap for different style stake if needed)

c. At this stage the Ionosphere can be used as a stand alone insect shelter, if so
desired.

a. Take out the Fly (Outer Tent ) and unfold and spread it out. Then drape the Fly
over the main body matching up the door area and foot area and then connect the two.
b. To connect the Fly to the main body simply use the Velcro attachment points to
connect it to the Poles where accessible through the Pole Sleeve Channel. There

zippers.