SNOWJOE SHOVELUTION SJ-SHLV01-RM Assembly Instructions Manual
A Division of Snow Joe®, LLC
© 2018 by Snow Joe®, LLC
All rights reserved. Original instructions.
Model SJ-SHLV01-RM
SHOVELUTION
TM
18" SNOW SHOVEL
ASSEMBLY INSTRUCTIONS
R
THANKS FOR YOUR PURCHASE
OF A REMANUFACTURED PRODUCT.
snowjoe.com
To make sure you get the most out of
your
product, be sure to register online at
to enjoy full product support.
PASTE UPC LABEL HERE
A Division of Snow Joe®, LLC
© 2018 by Snow Joe®, LLC
All rights reserved. Original instructions.
Model SJ-SHLV01-RM
SHOVELUTION
TM
18" SNOW SHOVEL
ASSEMBLY INSTRUCTIONS
R
mCAUTION!
HANDLE IS SPRING LOADED UNDER HEAVY TENSION.
To avoid injury, securely grasp handle before cutting zip ties.
Then, remove retaining strap and save for later storage.
TO ASSEMBLE:
1. Remove the knob and the bolt.
2. Insert the lower pole into the upper pole.
3. Align bolt holes, insert the bolt into the square hole,
through pole.
4. Tighten with the knob.
FOR STORAGE:
Make a loop with the retaining strap around the spring-loaded
handle, and with the other end, secure to knob on the upper pole.
NOTE: If you have further questions, please contact the Snow Joe® +
Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).
TO DISASSEMBLE:
Follow instructions above in reverse order.
Loading...