Electric Lawn Mower
Electric Lawn Mower
Model No. MJ401ERM
A Division of Snow Joe, LLC
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
When using electric lawn mowers, basic safety precautions
should always be followed to reduce the risk of re, electric
shock, and personal injury, including the following:
m WARNING: Risk of injury could occur if the lawn mower
is operated without the catcher assembly attached.
m WARNING: The use of any other accessory or
attachment might increase the risk of injury.
m WARNING: To reduce the risk of injury, inspect
catcher assembly frequently and replace with recommended
replacement if there are signs of wear or deterioration.
Before using the mower, take the time to familiarize yourself
with the controls, especially how to stop the mower in an
emergency. Only allow responsible individuals who have a
thorough understanding of these instructions and operate the
mower. Never allow children to operate the mower.
Retain this manual for future reference and reread it at the start
of each mowing session.
FOR DOUBLE-INSULATED LAWN MOWERS
1. Replacement Parts – When servicing use only identical
replacement parts.
2. USE ONLY Polarized Appliance Connections to reduce
the risk of electric shock, this appliance has a polarized
plug (one blade is wider than the other) and will require
the use of a polarized extension cord. The appliance
plug will t into a polarized extension cord only one
way. If the plug does not t fully into the extension
cord, reverse the plug. If the plug still does not t,
obtain a correct polarized extension cord. A polarized
extension cord will require the use of a polarized wall
outlet. This plug will t into the polarized wall outlet
only one way. If the plug does not t fully into the wall
outlet, reverse the plug. If the plug still does not t,
contact a qualied electrician to install the proper wall
outlet. Do not change the equipment plug, extension
cord receptacle, or extension cord plug in anyway.
Form No. SJ-MJ401ERM-880E
OPERATOR’S MANUAL
m Contact with moving parts may cause entanglement,
dismemberment or other serious bodily injury. Always
keep body parts (i.e.: hands, feet) away from moving parts.
Ensure all covers and guards are securely in place before
use.
Hot surfaces (i.e.: motor) may ignite ammables or
combustibles and cause a re or explosion resulting in
serious injury. Keep the mower away from ammables or
combustibles until hot surfaces have completely cooled.
Do not store mower near ammables or combustibles.
A damaged blade or worn blade nut may break off from
the mower assembly and cause serious injury. Replace the
damaged blade or blade nut before using the mower.
FOR ALL LAWN MOWERS
1. Avoid dangerous environment - Don’t use lawn mowers
in damp or wet locations.
2. Don’t use in rain.
3. Keep children away – All visitors should be kept at a
safe distance from work area.
4. Dress prope rly – Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of rubber
gloves and footwear is recommended when working
outdoors.
5. Use safety glasses – Always use face or dust mask if
operation is dusty.
6. Use right appliance – Do not use lawn mower for any
job except that for which it is intended.
7. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for
the lawn mower. Receptacles are available having
built-in GFCI protection and may be used for this
measure of safety.
8. Warning – To prevent electric shock use only with an
extension cord suitable for outdoor use, such as SW,
SOW, STW,STOW,SJTW, or SJTOW.
EXCEPTION: This warning does not apply to a battery
operated lawn mower.
9. Extension cord – Make sure your extension cord set is
in good condition. When using an extension cord, be
sure to use one heavy enough to carry the current your
product will draw. For lengths less than 100 feet, No.
14 AWG extension cord should be used. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating.
NOTE: To reduce the likelihood of disconnection of
lawn mower cord set during operating:
i) Make a knot as shown in Figure 1, or
© 2011 by Snow Joe, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
ii) Use one of the plug-receptacle retaining straps or
connectors described in this manual.
Method of securing cord set
Cord set Appliance cord
(A) Tie cord as shown
(B) Connect plug and receptacle
Figure 1
10. Don’t abuse cord – Never pull lawn mower by cord or
yank it to disconnect from receptacle. Keep cord away
from heat, oil, and sharp edges.
EXCEPTION: This statement does not apply to a
cordless battery-operated lawn mower.
11. Don’t force lawn mower – It will do the job better and
safer at the rate for which it was designed.
12. Don’t overreach – Keep proper footing and balance at
all times.
13. Stay alert – Watch what you are doing. Use common
sense. Do not operate lawn mower when you are tired.
14. Disconnect lawn mower – Disconnect the lawn
mower from the power supply when not in use, before
servicing, when changing accessories such as blades,
and the like.
15. Store ldle lawn mower indoors – When not in use, lawn
mower should be stored in an indoor dry locked-up
place – out of reach of children.
16. Maintain lawn mower with care – Keep cutting edges
sharp and clean for best and safest performance.
NOTE: Inspect lawn mower cord periodically and if
damaged, have it repaired by an authorized service
facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean, and free
from oil and grease.
17. Keep guards in place and in working order.
18. Keep blades sharp.
19. Keep hands and feet away from cutting area.
20. Objects struck by the lawn mower blade can cause
severe injuries to people and pets. The lawn should
always be carefully examined and cleared of all objects
prior to each mowing.
21. If lawn mower strikes a foreign object, follow these
steps:
i) Stop lawn mower. Release the switch.
ii) Unplug power cord.
iii) Inspect for damage.
iv) Repair any damage before restarting and operating
the lawn mower.
22. Use identical replacement blades only.
IMPORTANT!
Safety Instructions for
Walk-Behind Mowers
GENERAL OPERATION
1. Read, understand, and follow all instructions on the
machine and in the manual(s) before starting.
2. Do not put hands or feet near or under the machine.
Keep clear of the discharge opening at all times.
3. Only allow responsible adults, who are familiar with the
instructions, to operate this machine.
4. Clear the area of objects such as rocks, wires, toys,
etc., which could be thrown by the blade. Stay behind
the handle when the engine (motor) is running.
5. Be sure the area is clear of bystanders before
operating. Stop machine if anyone enters the area.
6. Do not operate machine barefooted or while wearing
sandals. Always wear substantial footwear.
7. Do not pull machine backward unless absolutely
necessary. Always look down and behind before and
while moving backward.
8. Never direct discharged material toward anyone. Avoid
discharging material against a wall or obstruction.
9. Do not operate machine without the entire grass
catcher, discharge guard, rear guard, or other safety
protective devices in place and working.
10. Never leave a running machine unattended.
11. Stop the engine (motor) and wait until the blade comes
to a complete stop before cleaning the machine,
removing grass catcher, or unclogging the discharge
guard. ALSO DISCHARGE FROM POWER SUPPLY.
12. Operate machine only in daylight or good articial light.
13. Do not operate machine while under the inuence of
alcohol or drugs.
14. Never operate mower in wet grass. Always be sure of
your footing; walk; never run.
15. Do not have mower running when over gravel surfaces.
2
16. If the machine should start to vibrate abnormally,
stop the engine (motor) and check for the cause
immediately. Vibration is generally a warning sign of
trouble.
17. Always wear eye protection when operating machine.
18. Only allow responsible adults, who are familiar with the
instructions, to operate this machine.
SLOPE OPERATION
Slopes are a major factor related to slip and fall accidents,
which can result in severe injury. Operation on all slopes
requires extra caution. If you feel uneasy on a slope, do not
mow it.
1. Mow across the face of slopes; never up and down.
Exercise extreme caution when changing direction on
slope.
2. Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could cause slip and fall
accidents. Tall grass can hide obstacles.
3. Do not mow on wet grass or excessively steep slopes.
Poor footing could cause slip and fall accident.
4. Do not mow near drop-offs, ditches, or embankments.
You could lose your footing or balance.
7. Check grass catcher components and the discharge
guard frequently and replace with manufacturer’s
recommended parts, when necessary.
8. Mower blades are sharp. Wrap the blade with
cardboard or cloth or wear gloves, and use extra
caution when servicing them.
9. Maintain or replace safety and instruction labels, as
necessary.
SYMBOLS
SYMBOLS DESCRIPTIONS
CPSC Danger label
Safety alert
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the
machine and the mowing activity. Never assume that children
will remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of a responsible adult other than the
operator.
2. Be alert and turn mower off if a child enters the area.
3. Never allow children to operate the machine.
4. Use extra care when approaching blind corners,
shrubs, trees, or other objects that may block your
view of a child.
SERVICE
GENERAL SERVICE
1. Keep all nuts and bolts tight to be sure the equipment
is in safe working condition.
2. Never tamper with safety devices. Check their proper
operation regularly.
3. Keep machine free of grass, leaves, or other debris
build-up.
4. If you strike a foreign object, stop and inspect the
machine. Repair, if necessary, before starting.
5. Never make any adjustments or repairs with the engine
(motor) running.
6. Always unplug electric mowers before adjusting,
cleaning, or repairing.
Read the operator’s manual
Severing of toes or ngers-rotary
mower blade
Slip on slope
Thrown objects and rotating line
can cause severe injury
Keep bystanders/children away
Double insulation
3
Safety and Instruction Decals
Safety decals and instructions are easily visible to the
operator and are located near areas of potential danger. Lost
m
or damaged decals should be replaced.
MJ401E-2134
m WARNING
• Read the operator’s manual.
• Go across slopes, not up and down.
• Do not mow when children or others are around.
• Look down and behind before and while moving.
• Remove objects that could be thrown by the blade.
• Keep safety devices (guards, shields, switches, etc.) in place and working.
• Risk of electric shock. Do not expose to water – replace damaged cord immediately.
• DOUBLE INSULATION – when serving, use only identical replacement parts.
• To reduce the risk of injury, do not operate without guards in place.
• To reduce the risk of injury, inspect catcher assembly frequently and replace with recommended
replacement if there are signs of wear or deterioration.
• Severing of toes or ngers-rotary mower blade.
• Keep bystanders/children away.
m ADVERTENCIA
• Lea el manual del operador.
• Vaya a través de los desniveles, nunca de arriba abajo.
• No corte cuando haya niños u otras personas alrededor.
• Mire hacia abajo y hacia atrás antes y mientras se mueve hacia atrás.
• Quite objetos que pudieran ser arrojados por la cuchilla.
• Mantenga los dispositivos de seguridad (protectores, cubiertas, interruptores, etc.) en su lugar y
funcionando.
• Riesgo de choque eléctrico. No exponga al agua – reemplace el cable dañado inmediatamente.
• DOBLE AISLAMIENTO – al prestar servicio, use sólo piezas de repuesto iguales.
• Para reducir el riesgo de lesión, no opere sin protectores en su lugar.
• Para reducir el riesgo de lesión, inspeccione frecuentemente el ensamble del depósito para el
césped y reemplace como se recomienda si hay señales de desgaste o deterioro.
• Peligro para dedos o pies - cuchilla rotativa de cortadora.
• Mantenga alejados a espectadores/niños.
m AVERTISSEMENT
• Lire le manuel d’utilisation.
• Tondre pentes et talus en diagonale, et non à la verticale.
• Ne pas utiliser la tondeuse à proximité d’enfants ou autres personnes.
• Scruter attentivement le sol si vous devez reculer avec la machine.
• Débarrasser la zone de travail de tout objet risquant d’être projeté.
• S’assurer que les dispositifs de sécurité (carters, écrans, interrupteurs,etc.) sont
bien en place et fonctionnels.
• Risque de choc électrique. Ne pas exposer à l’eau – remplacer immédiatement tout
cordon endommagé.
• DOUBLE ISOLATION – N’utiliser que des pièces de remplacement identiques.
• An de réduire le risque de blessures, ne pas utiliser la machine si les dispositifs t
• An de réduire le risque de blessures, inspecter régulièrement l’ensemble trémie de
collecte/bac à herbe et remplacer les pièces usées ou détériorées par des pièces
recommandées.
• Risque de mutilation des doigts ou des orteils..
• Garder enfants et autres personnes à distance..
AVOID SERIOUS INJURY OR DEATH
EVITE LESIONERS GRAVES O LA MUERTE
DANGER DE BLESSURES GRAVES
OU MORTELLES
R
SUN JOE MOW JOE MJ401E
120 VAC 60 HZ 12 A, NO:3500/MIN, 360 MM
Made in China
SUN JOE MOW JOE MJ401E
120 VAC 60 HZ 12 A, NO:3500/MIN, 360 MM
Hecho en China
SUN JOE MOW JOE MJ401E
120 VCA 60 HZ 12 A, NO:3500/MIN, 360 MM
Fabriqué en Chine
3174208
CONFORMS TO UL STD.1447
DE CONFORMIDAD CON LA NORMA UL 1447
CONFORME À LA NORME UL 1447
Replacement manual available by sending model and serial numbers to:
Snow Joe, LLC, 86 Executive Avenue, Edison, NJ 08817, or visit www.snowjoe.com
El manual de reemplazo está disponible al enviar los números de modelo y serie a:
Snow Joe, LLC, 86 Executive Avenue, Edison, NJ 08817, o visite www.snowjoe.com
Pour obtenir un autre exemplaire du Manuel d’utilisation, faire parvenir les numéros de
modèle et de série de votre machine à l’adresse suivante :
Snow Joe, LLC, 86 Executive Avenue, Edison, NJ 08817, ou consulter notre site Internet
à l’adresse www.snowjoe.com
SN
MJ401E-2135
! CAUTION ! ! CAIDADO ! ATTENTION!
When starting the MOW JOE lawn mower in grass,
move the mower to a previously cut region or
apply downward pressure to the handle to lift the
front wheels slightly off the ground. In the event of
circuit failure, reset the circuit after one minute by
depressing the circuit breaker reset button.
Al arrancar la cortadora de césped MOW JOE en
hierba, mueva la cortadora a un área previamente
cortada o aplique presión hacia abajo a la
agarradera para levantar ligeramente las ruedas
delanteras. En caso de presentarse una falla en el
circuito, vuelva a arrancar el circuito después de
un minuto oprimiendo el botón de reposición del
cortacircuitos.
Pour procéder à la mise en marche de la tondeuse
MOW JOE, placer la machine sur une portion de
pelouse préalablement coupée ou exercer une
faible pression sur le guidon an de soulever
légèrement les roues avant de la tondeuse. En cas
de déclenchement du circuit électrique, attendre
une minute et réenclencher le circuit en actionnant
le disjoncteur.
MJ401E-2136 MJ401E-2137
4
AVOID SERIOUS INJURY OR DEATH
• READ THE OPERATOR’S MANUAL.
• GO ACROSS SLOPE, NOT UP AND DOWN.
• DO NOT MOW WHEN CHILDREN OR OTHER
ARE AROUND.
• LOOK DOWN AND BEHIND BEFORE AND
WHILE MOVING BACKWARDS.
• REMOVE OBJECTS THAT COULD BE
THROWN BY THE BLADE.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS,
SWITCHES, ETC.) IN PLACE AND WORKING.
Know Your Lawn Mower
A. Switch Lever
B. Safety lock-off button
C. Cable tension relief holder
D. Cable clip
E. Upper handle
F. Knobs (x2)
G. Lower handle
H. Flap
I. Power cable
J. Reset button of over-load switch
K. Grassbox/Catcher
L. Mower deck
M. Wheel/Wheel cover
N. Top cover
A
B
C
J
E
I
F
D
H
G
K
N
Technical Data
1.Power – 12A
2. Performance – Cut up to 14” (36cm) wide in one pass
3. Control – Adjust cutting height up to 2.4” (6.1cm) deep
L
M
Figure 2
4. Voltage – 120V/60Hz
5. Rotating Speed – 3500rmp
6. Weight – 13kg
5
Assembly
m CAUTION m
Inspect wiring, which, if damaged during shipping, may
cause serious bodily injury during equipment use. If any
damage is seen or suspected, do not assemble. Instead,
contact Snow Joe Customer Service (1-866-766-9563)
for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Before using the mower, follow these
instructions to assemble the handle and
grassbox.
Handle Assembly
1. Fit the lower handle into the two holes in the machine
body (A) and fasten them with the screws (B) provided.
2. Slide the wire management ‘Clip’ (C) onto the upper
handle (D).
3. Join the upper handle (D) to the lower handle (E) by means
of the knob (F), plastic washer (G), and bolts (H) provided.
C
D
A
B
Figure 3
A. Machine body B. Screw
H
G
E
F
Figure 4
C. Cable relief
D. Upper handle
E. Lower handle
F. Tighten knob
G. Plastic washer
H. Bolts
6
Grassbox & Assembly Fitting
1. Fit the support rod (A) into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine.
A
3. Raise the spring loaded rear door (C) and move the basket
up to the mower body. Fasten it onto the coupling
hooks (D).
C
D
Figure 5
A. Support rod
2. Place the protective plastic proles (B) onto the “U” rod.
B
Figure 6
B. Protective plastic prole
Figure 7
A. Rear door B. Coupling hooks
4. Release the rear door to secure the basket in position.
Figure 8
7
Features
Operation
Safety Lock-off Button (A): Used to engage the switch.
Switch Lever (B): Used to start and stop the mower.
START
STOP
A
Figure 9
After conducting all safety checks and necessary preparations,
follow these steps to operate the mower:
1. Push the loop of the electric extension cord through the
B
slot from the opposite side of the restraint hook. Position
the loop over the hook and pull the cable back through the
slot.
A
B
Figure 11
A. Cable relief B. Extension cord
Note: Use a waterproof electrical extension cord rated
14AWG. H05VV-F and H05RN-F in US.
A. Safety lock-off button B. Switch lever
Grassbox (C): Used to collect mowed clippings.
Figure 10
C. Grass box
2
3
1
4
Figure 12
C
2. Place the bulk of the extension cord on the lawn close to
the starting point.
Note: The directional method of operation is
recommended to obtain the maximum cutting
performance and reduce the risk of the electrical
extension cord entering the cutting path.
3. Hold the handle assembly with both hands.
4. Tilt the handle downwards to slightly raise the front of
the mower. This will reduce the risk of lawn damage
during start-up.
8
Helpful tips on starting your new mower
Step 1: Tilt the handle to lift
the front wheels of
the mower slightly off
the ground.
Step 2: Press down and hold the
safety switch, then pull
back the trigger. You can
now release the safety
switch. Let the mower
get up to speed.
safety switch
trigger
Step 3: Slowly lower the lawn
mower so the front
wheel is on the ground
and start mowing.
Step 4: To stop, release the trigger.
9
START
STOP
Figure 13
B
Adjusting the Cutting Height
Follow these instructions to adjust the cutting height of the
lawn mower.
m WARNING
DO NOT make these adjustments when the mower is running
or plugged in. Doing so can cause serious injury or death. Also,
we recommend wearing gloves due to the close proximity of
the cutting blade.
ALWAYS FOLLOW ALL SAFETY PRECATIONS AND
RECOMMENDATIONS LISTED PREVIOUSLY IN THIS
MANUAL.
1. Power down and unplug the lawn mower.
A
2. Remove and empty the grass box.
3. Place the lawn mower on one of its sides. (See Fig.14)
A. Safety lock-off button B. Switch lever
5. Depress the safety lock-off button (A) and pull the switch
lever (B) towards you.
6. Lower the mower down into the cutting position.
7. Follow these instructions to mow the cutting area:
A. Proceed to cut as shown in Fig 12, working from
position 1 towards position 2.
B. At position 2, turn right and proceed to position 3.
C. Continue to the end of the cutting area, turn left and
proceed to position 4.
D. Proceed as shown in Figure 12, always working away
from the electric extension cable.
8. Release the switch lever to stop the mower.
Important: The mower blade will continue to rotate as you
are pulling the switch lever. Do not reach inside the blade
housing or attempt to lift the mower until the blade has
completely stopped and the electrical supply to the mower
has been disconnected.
High Setting
Medium Setting
Low Setting
Rod Axel
Figure 14
4. The wheel axels can be places into 3 different cutting
heights: Low (will cut grass the shortest), medium, and
high.
5. Move all four wheels to the desired cutting height. Simply
pull back on the rod axel and set your desired wheel
height. Make sure all four wheels are the same height.
6. Place the lawnmower back on to its wheels and re-attach
the grass box.
7. Plug back in your mower and resume normal use.
10
Maintenance and Care
General
• Always keep the mower clean and free of grass clippings.
• After each cutting session, scrape or blast with water the
built up grass from the underside of the blade housing.
• Clean plastic parts with a damp cloth. Do not use solvents
or cleaning uids on plastic components.
• Check all nuts, bolts and screws before each use.
• Store the mower in a dry area.
Blade Maintenance
The steel blade is designed to provide a ne cut in long or
tough grass. Deterioration in the quality of cut indicates blade
wear or damage. Follow these steps to determine if the blade
needs to be repaired or replaced:
1. Disconnect the electrical supply to the mower.
2. Turn the mower on its side so the underside of the
blade housing is exposed.
3. Check the blade.
a. If the blade is blunt or has minor wear, then
re-sharpen.
b. If the blade has major wear or damage
(i.e.: gouged, bent), replace. Please call Sun
Joe customer service (1-866-766-9563) for
assistance.
Blade Replacement
Important: Only use original replacement parts specied for
this mower.
1. Disconnect the electrical supply to the mower.
2. Turn the mower on its side so the underside of the
bladehousing is exposed.
3. Use a cloth to grip the blade or wear heavy-duty gloves.
4. Using the spanner provided, turn the bolt counter-
clockwise to loosen and remove the bolt and washer from
the motor and remove blade.
5. Fit the new blade, the washer and the bolt back on in the
same direction and sequence as the removal of old blade.
B
A
C
Figure 16
A. Bolt B. Blade C. Washer
Service and Support
B
Figure 15
A. Blade B. Spanner
A
If your Mow Joe Electric Lawn Mower requires service or
maintenance, please call 1-866-766-9563 for assistance.
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal afxed to the housing or handle
of your mower. Copy these numbers into the space provided
below.
Record the following numbers from the housing or handle of your
new product:
Model #:
M J 4 0 1 E R M
Serial #:
11
A One-Year Full Warranty
for residential use
in the United States and Canada
General Conditions:
Snow Joe, LLC warrants this product to the original purchaser for one year against defects in material or workmanship when used for
normal residential purposes. Snow Joe, LLC will repair any defect in material or workmanship, and repair or replace any defective part,
subject to the conditions, limitations, and exclusions set forth herein. Such repair or parts replacement will be free from charge to the
original purchaser except noted below.
The duration of the warranty applies only if the product is put to personal use around the household or residence. If the product is put
to any business use, commercial or industrial, then the duration of this warranty is 90 days from the date of original purchase. If any
product is rented or leased, the duration of the warranty is 90 days from the date of original purchase.
It is the owner’s responsibility to perform correctly all maintenance, and minor adjustments explained in the owner’s manual.
Electric Products:
To obtain a replacement electric powered unit or repair the existing electric powered unit, you must return the complete unit and
postage prepaid to: Snow Joe Return Center, 86 Executive Avenue, Edison, NJ 08817.
Gasoline / Battery Products:
Limitations
• Batteries are warranted only for the period of 12 months after the date of purchase on a prorated basis. Rechargeable batteries
will be replaced free from charge during the rst 90 days. After the initial 90 days, batteries will be replaced at prorated cost to
the customer
• Idlers, cables, and electrical components are warranted to the original purchaser for use at household or residence for a period
of one year
Exclusions
• Snow Joe brand engines are covered under this warranty. All other engines and engine accessories are covered only by the
engine manufacturer’s warranty and are not covered by this warranty
• Parts used that are not genuine Snow Joe parts are not covered by this warranty
• Damages resulting from misuse, alteration, improper assembly, improper adjustment, neglect, or accident which requires repair
is not covered under this warranty
• Belts, augers, and tines are not covered under warranty – belts, augers, and tines wear out and can be purchased at
www.snowjoe.com or by calling 1-866-766-9563
Snow Joe, LLC may from time to time change the design of its products. Nothing contained in this warranty shall be construed as
obligating Snow Joe, LLC to incorporate such design changes into previously manufactured products, nor shall such changes be
construed as an admission that previous designs were defective.
This warranty is intended to cover product defects only. Snow Joe, LLC is not liable for indirect, incidental, or consequential damages
in connection with the use of the Snow Joe Products covered by this warranty. This warranty does not cover any cost or expense
incurred by the purchaser in providing substitute equipment or service during reasonable periods of malfunction or non-use of this
product, while waiting for completion of repairs under this warranty. Some states do not allow exclusions of incidental or consequential
damages, so the above exclusions may not apply in all states. This warranty may gives you specic legal rights in your state.
If you wish to contact Snow Joe, please direct inquiries to the:
Customer Service Department
Snow Joe Center
86 Executive Avenue
Edison, NJ 08817
Customers who have purchased Snow Joe products exported from the United States and Canada should contact their Snow Joe
Distributor (Dealer) to obtain information applicable for your country, province, or state. If for any reason, you are not satised with the
distributor’s service, or if you have difculty obtaining warranty information, contact your Snow Joe seller. If in the event your efforts
are unsatisfactory, please write to the Snow Joe Center at the above address.
If you have any questions about your product warranty, please call 1-866-SNOW-JOE or visit us online at www.snowjoe.com.
12
Loading...