SnowEx TLR-175 User Manual

Trailer Mount Parts Breakdown

Model #TLR-175

MAXIMUM LOAD WEIGHT NOT TO EXCEED 240 LBS. GROSS

TRAILER MOUNT ASSEMBLY INSTRUCTIONS

Step 1: Insert axle through wheel and axle weldment.

Step 2: Put washer on, then install hair pin clip to secure axle. Repeat Steps 1 and 2 for other side.

Step 3: Bolt tube support on axle weldment.

Step 4: Insert trailer tongue per drawing and pin into position.

Step 5: Insert spreader mount into opposite side of trailer tongue and pin into position.

.ytQ noitpircseD .oN traP yeK

D 4116 1/2'' - 13 x 1-1/2'' Hex bolt 2

D 4136 5/8'' x 5 -1/2'' Hitch pin 1

D 6440 Receiver tube mount 1

2 erit reliarT 1446 D

D 6442 5/8'' - 13 x 7'' Hex bolt special 2
D 6443 5/8'' Flat washers 4

2 stunkcoL - ''2/1 0214 D
3 pilc nip riaH 5314 D

1 eugnot reliarT 8346 D
1 emarf ”A“ reliarT 9346 D