SnowEx SP-2200 User Manual

800-725-8377

(REV 000)

2 — 1

800-725-8377

FOR MODEL

SP-2200

This Manual Must Be Read Before Operating The Equipment

CUSTOMER COPY

Warren, Michigan 48089

800-725-8377

and other pending U.S. and foreign patent applications.

See Back Page for Details!

Warm Up to

with a

FREE

Winter Band!

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Information and Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Spreader Assembly and Exploded Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Electrical System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Spreader Mounting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Work Light Assembly & Spreader Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Spreader Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Determine Vehicle Payload Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-7

8-17

19-22

23-24

25-28

29-31

32

33

34-35

Have a question or need assistance?

SnowEx Customer Service

(800) 725-8377

or (586) 756-6555

Monday through Friday 8:00 AM to 4:30 PM EST

Fax: (586) 427-0552

E-Mail: customercare@trynexfactory.com

Website: www.snowexproducts.com

1— 2

Introduction

This manual has been designed for your help. It will assist you and instruct you on the proper set-up, installation and use of this spreader. Refer to the table of contents for an outline of this manual.

We require that you read and understand the contents of this manual completely (especially all safety information) before attempting any procedure contained herein.

THIS SIGN SHOULD ALERT YOU: The Society of Automotive Engineers has adopted this SAFETY ALERT SYMBOL to pinpoint characteristics that, if NOT carefully followed, can create a safety hazard. When you see this symbol in this manual or on the machine itself, BE ALERT! Your personal safety and the safety of others is involved.

Dened below are the SAFETY ALERT messages and how they will appear in this manual:

(RED) Information that, if not carefully followed, can cause death!

.

(ORANGE) Information that, if not carefully followed, can cause serious personal injury or death!

(YELLOW) Information that, if not carefully followed, can cause minor injury or damage to equipment.

General Information

CONGRATULATIONS!

The spreader you have purchased is an example of snow and ice control technology at its nest! Your spreader’s innovative, self-contained design is a trademark of all Trynex products. Here’s why...

SIMPLICITY: Fewer moving parts manufactured of higher quality means minimal maintenance for your SnowEx spreader.

RELIABILITY: High impact linear low density polyethelyne hopper, state-of-the-art electronic dual variable speed control,

custom engineered powder coated frame, maximum torque 12 volt motor coupled to a custom engineered transmission found only on SnowEx products.

VERSATILITY: Multi-use capabilities allows spreading of a variety of materials for snow and ice control.

WARRANTY: Best in the industry, hands down! 2 Years Standard and now a 5 Year Extended (optional).

The benets you are about to recognize are that of time, money and eort.

e lco o o ld of fo c

Registration

Record the following information in this manual for quick reference.

Spreader Model Number _____________________________________________________________________________________

Spreader Serial Number ________________________________ Controller Serial Number _______________________________

Date of Purchase ___________________________________________________________________________________________

Dealer Where Purchased _____________________________________________________________________________________

When ordering parts, the above information is necessary. This will help to insure that you receive the correct parts.

At the right is a diagram of the ID tag. This tag on the spreader is located on the frame.

Please ll out the warranty card with all the necessary information to validate it. This will also give us a record so that any safety or service information may be communicated to you.

1 — 4

Safety

Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who have any part in the preparation or use of this equipment.

For your safety warning and information decals have been placed on this product to remind the operator of safety precautions . If anything happens to mark or destroy the decals, please request new ones from Trynex, International.

Unit must be strapped down and locked into position before operating vehicle.

Never exceed the Gross Vehicle Weight Rating of vehicle. Failure to do so may limit a vehicles handling characteristics.

Never attempt to take a unit o a truck with material in it.

Never exceed 45 m.p.h. when loaded spreader is attached to vehicle. Braking distances may be increased and handling characteristics may be impaired at speeds above 45 m.p.h.

Never allow children to operate or climb on equipment. Always check areas to be spread to be sure no hazardous conditions or substances are in the area Always inspect unit for defects: broken, worn or bent parts, weakened areas on spreader or mount.

Always shut o vehicle and power source before attempting to attach or detach or service spreader unit. Be sure vehicle/power source is properly braked or chocked.

Always keep hands, feet, and clothing away from power-driven parts. Remember it is the owner’s responsibility to communicate information on safe usage and proper maintenance of all equipment.

Always make sure personnel are clear of areas of danger when using equipment. Maintain 60' distance from all bystanders when operating the spreader.

Inspect the unit periodically for defects. Parts that are broken, missing, or worn out must be replaced immediately. The unit, or any part of it cannot be altered without prior written permission from the manufacturer.

.

Never use V-Maxx 2200 with foreign debris in the spreader. These units are designed to handle clean, free-owing material.

1 — 5

Safety

(continued)

Always inspect pins and latches whenever attaching or detaching spreader, and before traveling.

Never leave material in hopper for long periods of time. Be aware that all ice melters are hygroscopic and will attract atmospheric moisture and harden up.

Remember, most accidents are preventable and caused by human error. and precautions must be observed to prevent the possibility of injury to operator or others!

Never operate equipment when under the inuence of alcohol, drugs, or medication that might alter your judgment and/or reaction time.

Before working with the spreader, secure all loose tting clothing and unrestrained hair.

Always wear safety glasses with side shields when servicing spreader. Failure to do this could result in serious injury to the eyes.

Exercising of care

Safety and Warning Labels

Model # SP-2200

D 6546

D 6545

NO STEP WARNING

!

. . . .

T

.

DANGER

W

O

y

D 5703

SERIAL NUMBER ON INSIDE FACE

BOTH SIDES

.

!

WARNING

.

. .

.

O

.

U

.

D 5704

D 6544

D 6335

1 — 7

Assembly Views

Model # SP-2200

1 — 8

THIS PAGE INTENTIONALLY LEFT BLANK

1 — 9

Auger Drive Assembly Parts Breakdown

Model # SP-2200

1 — 10

Auger Drive Assembly Parts Breakdown

Model # SP-2200

.ytQ noitpircseD .oN traP yeK

D4124 3/8” Nylock Nut D5527 Bearing D5313 Auger Weldment

D5305 Transmission Mounting Bracket D6825 Auger Motor D5753 Transmission Bracket Mounting Bolt D6132 1/4-20 x 3/4 SS HH Serrated Flange Bolt D5706 5/16 Serrated Flange Bolt D6894 Auger Transmission D5306 Auger Motor Cover D4313 Lock Washer D6133 5/16-18 x 1/2 HH Bolt Ref Only 3/16 Key Stock

D6842 Auger Motor Coupler

T15014 1/4” Flat Washer D5776 Auger Coupler Spyder

4 2

1

2 1 8 2 4 1 1 2 2 2 2 2 1

1— 11

SnowEx SP-2200 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual