SnowEx 261382 User Manual
Owner / Operator’s Manual
This Manual Must Be Read Before Operating The Equipment
Madison Heights, Michigan 48071
800-SALTERS
www.snowexproducts.com
SP-85
Serial No. PD-102588 and higher
SP-85SS
Serial No. PE-100800 and higher
CUSTOMER COPY
© Trynex International 2013
(REV A) F50768
1
Table of Contents
General Information ...................................................................................................................................................................................... 3
Introduction ................................................................................................................................................................................................. 4
Safety .......................................................................................................................................................................................................... 5
Assembly Instructions .................................................................................................................................................................................6-7
Operating the Spreader .................................................................................................................................................................................. 8
Maintenance ................................................................................................................................................................................................ 9
Troubleshooting ......................................................................................................................................................................................... 10
Warranty .................................................................................................................................................................................................... 11
Spreader Views
Model # SP-85 / SP-85SS ....................................................................................................................................................... 12-13
Hopper Assembly Parts Breakdown
Model # SP-85 / SP-85SS ....................................................................................................................................................... 14-15
Deector Assembly Parts Breakdown
Model # SP-85 / SP-85SS ....................................................................................................................................................... 16-17
Axle Assembly Parts Breakdown
Model # SP-85 ........................................................................................................................................................................ 18-19
Handle Assembly Parts Breakdown
Model # SP-85 ........................................................................................................................................................................ 20-21
Axle Assembly Parts Breakdown
Model # SP-85SS ................................................................................................................................................................... 22-23
Handle Assembly Parts Breakdown
Model # SP-85SS ................................................................................................................................................................... 24-25
Notes .............................................................................................................................................................................................. 26-27
Have a question or need assistance?
SnowEx Customer Care
(800) 725-8377
or (248) 586-3500
Monday through Friday 8:00 AM to 4:30 PM EST
Fax: (248) 691-8378
E-Mail: customercare@trynexfactory.com
Website: www.snowexproducts.com
© Trynex International 2013 (REV A) F507682
General Information
CONGRATULATIONS!
The spreader you have purchased is an example of snow and ice control technology at its nest! Your spreader’s self-contained design is a
trademark of all SnowEx products. Here’s why…
SIMPLICITY: Fewer moving parts manufactured of higher quality means minimal maintenance for your SnowEx spreader.
RELIABILITY: High impact linear low density polyethelyne hopper. Custom engineered, powder coated frame. And a custom engineered trans-
mission found only on Snowex products.
VERSATILITY: Multi-use capabilities allows spreading of a variety of materials for snow and ice control.
WARRANTY: Best in the industry, hands down! 2 years standard and now 5 year extended (optional).
The benets you are about to recognize are that of time, money and effort.
We welcome you to the world of SnowEx Performance.
Registration
Record the following information in this manual for quick reference.
Spreader Model Number
Spreader Serial Number
Date of Purchase
Dealer Where Purchased
When ordering Parts, the above information is necessary. This will help to see that you
receive the correct parts.
At the right is a diagram of the ID tag. This tag on the spreader is located on the
frame.
Please ll out the warranty card with all the necessary information to validate it.
This will also give us a record so that any safety or service information can be
communicated to you.
PD-200000
PE-100000
3© Trynex International 2013 (REV A) F50768
Introduction
This manual has been designed for your help. It will assist you and instruct you on the proper set-up, installation and use of this spreader.
Refer to the table of contents for an outline of this manual.
We require that you read and understand the contents of this manual completely (especially all safety information) before attempting any
procedure contained herein.
THIS SIGN SHOULD ALERT YOU:
The Society of Automotive Engineers has adopted this SAFETY ALERT SYMBOL to pinpoint characteristics
that, if NOT carefully followed, can create a safety hazard. When you see this symbol in this manual or on the
machine itself, BE ALERT! Your personal safety and the safety of others is involved.
Dened below are the SAFETY ALERT messages and how they will appear in this manual:
(RED)
Information that, if not carefully followed,
can cause death!
(ORANGE)
Information that, if not carefully followed,
can cause serious personal injury or death!
(YELLOW)
Information that, if not carefully followed,
can cause minor injury or damage to equipment
© Trynex International 2013 (REV A) F507684
Safety
Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who have any part in the
preparation or use of this equipment.
For your safety warning and information decals have been placed on this product to remind the operator of safety precautions . If anything
happens to mark or destroy the decals, please request new ones from TurfEx.
Remember, most accidents are preventable and caused by human error. Exercising of care and precautions
must be observed to prevent the possibility of injury to operator or others!
Never operate equipment when under the inuence of alcohol, drugs, or medications that might alter your
judgment and/or reaction time.
Before working with the spreader, secure all loose tting clothing and unrestrained hair.
Always wear safety glasses with side shields when servicing spreader. Failure to do this could result in
serious injury to the eyes.
Never attempt to lift a unit with material in it.
Never allow children to operate or climb on equipment.
Always check areas to be spread to be sure no hazardous conditions or substances are in the area.
Always inspect unit for defects: broken, worn or bent parts, weakened areas on spreader.
Remember it is the owner’s responsibility to communicate information on safe usage and proper
maintenance of all equipment.
Always make sure personnel are clear of areas of danger when using equipment.
Never weld or grind on equipment without having a re extinguisher available.
Inspect the unit periodically for defects. Parts that are broken, missing or worn out must be replaced
immediately. The unit or any part of it can not be altered without prior written permission from the
manufacturer.
Never use wet materials or materials with foreign debris with any of these spreaders. These units are
designed to handle dry, clean, free owing material.
Never leave material in hopper for long periods of time. Be aware that all salt is hygroscopic and will attract
atmospheric moisture and harden up.
5© Trynex International 2013 (REV A) F50768
Assembly Instructions
Model # SP-85 / SP-85SS
Step 1: Slide Actuator Rod up through the slot in the Spreader
Support Leg from the spinner side.
Step 2:
A: Attach Actuator Rod to Gate Linkage. Secure with Hair Pin Clip.
B: Remove Pivot Bolt that attaches the Gate Linkage to Frame.
© Trynex International 2013 (REV A) F507686
Assembly Instructions
Model # SP-85 / SP-85SS
Step 3:
A: Attach Actuator Rod to Handle.
B: Slide Handle Assembly onto Spreader Frame and install
corresponding Hardware from provided Hardware Kit.
C: Reinstall Pivot Bolt that was removed in Step 2B.
See Deector Assembly Parts Breakdown
Step 5: Put Weather Cover on Hopper.
p. 16
7© Trynex International 2013 (REV A) F50768
Operating the Spreader
Model # SP-85 / SP-85SS
SPREADER LOADING
Capacity: 2 Cubic Ft Hopper
WARNING – Do not overload spreader. Weights of material are an average for dry materials.
Material Weight Per Cubic Ft.
Bulk Salt 80-90 lbs.
• Warning – Never remove spreader from vehicle with material in it as this could cause damage to the frame assembly.
• Warning – Never leave materials in hopper for long periods of time, salt is hygroscopic and will attract atmospheric
moisture and harden up.
SPREADING TIPS
• For a wider pass, increase walking pace.
• For a heavier pass, walk slower .
• Use care when operating spreader near pedestrians.
• Calculate spread pattern when near vegetation.
© Trynex International 2013 (REV A) F507688
Maintenance
Model # SP-85 / SP-85SS
Important
Gears and Axles Must Be Lubricated and Greased Every 20 Hours of Use.
Remove Gear Housing and apply Chain Lube Spray
Lubrication.
Use General Purpose Grease on both Grease Zerks.
9© Trynex International 2013 (REV A) F50768
Loading...