Snell Acoustics ICS 1070 User Manual

ICS Series

Design Acoustic Suspension D'Appolito Array

Frequency Response

62Hz-22kHz+3dB

Sensitivity 90dB

Nominal Impedance 4 Ohms

Crossover Frequency 2.0kHz

Recommended Amplifier Power 50-300 Watts

Maximum Output (per pair) 110dB

Placement Wall, or Shelf

Dispersion Angle (+1dB of on-axis response) Horizontal: +45 degrees

Vertical: +12 degrees

Drive Units Tweeter: 1-inch SEAS Silk Dome

Woofer: Two 6.5-inch Poly, 5mm Excursion

Video Shielding Standard

Dimensions Height: 19.5-inches

Width: 7.75-inches

Depth: 11-inches

Finishes Cabinet: Textured Black Paint

Grille: Black Cloth over MDF Frame

Munufactured by Snell Acoustics, PO 3717, Peabody MA 01960

www.snellacoustics.com 978-538-6262 978-538-6266fax

ICS 1070

FOR BUILT-IN CABINETS, A UTILITY VERSION
OF THE ACCLAIMED D7 TOWER

The unique cabinet design, placement switch and wide
dispersion tweeter of the ICS 1070 bring the performance
of a freestanding high-end tower to an in-cabinet book­shelf enclosure. Conventional bookshelf loudspeakers
sound “chesty” and image poorly when used in in-cabinet
applications. The ICS 1070 is a 6.5-inch, D’Appolito Array,
designed by Snell chief engineer, Joe D’Appolito, to fit into
furniture and millwork, and, is tuned to compensate for
the sonic problems that these cabinet boundaries cause.
The twin 6.5-inch long throw woofers provide extended
bass and plenty of output, while the 1-inch low-resonance,
silk dome tweeter enables a large sweet spot for better
stereo imaging. The ICS 1070 uses the same components as
the Snell D7 Tower and AMC 870 in-wall monitor, mounted
in a robust, texture-painted enclosure. This high output
LCR can be used for Left, Center and Right or mixed and
matched with these two siblings to provide clean, im­pactful sound with an effortless and “airy” soundstage…

perfect for music and movies.

ICS 1070