Snell AMCSUB-10 Brochure

Snell

Bottom Octave Bass.......Mounts Flush in

2x4 Walls.....Includes Unique “Back-Box”

Deep bass needs a great woofer, mounted in a sturdy,
well designed enclosure. These requirements severely
compromise all in-wall subwoofers, intended for conven­tional 2” x 4” stud walls...until now. Joe D’appolito, and
his Snell team, designed the AMC Sub10 to be shallow
enough to fit into a standard wall and still provide first
octave bass to an incredible 25Hz at levels up to
110dB! The 3.5-inch deep enclosure extends bass
response, while quieting the “boomy”and “chesty”
characteristics that are typical of “open-back” in-wall
designs. The tricks are a very unique, long-throw, low­profile woofer fitted, along with two 26” long port tubes,
to a remarkably innovative cabinet. The result is a
homeowner’s dream come true. Bass that duplicates
the efforts of big subwoofer in the corner,
without...well...the big subwoofer in the corner. For
optimum performance, try one, or better still, try two
AMC Sub10s with Snell’s 200 Watt sub amp, the SPA

200.

AMC Series AMC Series

AMC Series

AMC Series AMC Series

AMC Sub10

Design Bass Reflex, Un-Powered Subwoofer

Frequency Response

Power Handling 100-300 Watts

Nominal Impedance 8 Ohms

Sensitivity 85dB

Maximum Output @30Hz 110dB

Placement In-Wall, In-Floor, In-Ceiling, and under furniture

Drive Unit Woofer: 10-inch Aluminum Cone, 10mm Excursion

Input Connection Through enclosure, to push terminals on woofer, for up to #12 wire

Video Shielding Yes

Dimensions Height: 53-inches, includes feet (1.5-inches)

Weight (shipping) 36 Lbs.

Finishes Cabinet: Black Painted MDF

25Hz-150Hz

Width: 14-inches
Depth: 3.375-inches

Grille: Perforated metal, matte white (paintable)

www.snellacoustics.com 978-538-6262 978-538-6266fax

+3dB