CAUTION: INSTRUMENT FINISHES. READ
THIS BEFORE USING THE SNARK TUNER.
We recommend you remove the Snark tuner from
your instrument as soon as you finish tuning. Please
be aware that any lacquer type finish can be
adversely affected if the rubber pad of tuner is left in
contact with the finish for a period of time.
Some finishes are more likely to be damaged by
attaching a tuner to them, hence it is important that
you DET ERMINE WHAT FINISH IS USED ON
YOUR INSTRUMENT... BEFORE using the SNARK.
SNARK advises NOT to use its tuner with any
instruments having these types of finishes:
Nitrocellulose Lacquer, Polyurethane, French Polish,
Oil Finish or Gibson®guitars which have nitrocellulose finishes, unless you accept the risk of dents to
the headstock. We recommend using the Snark SN10 pedal tuner instead of the Snark clip on tuners
for these guitars and finishes.
Please do not leave the Snark attached to your
instrument if your instrument will be sitting in direct
sunlight.
Attaching the Tuner to Your Instrument
Use the clamp to attach the Snark to your
instrument. Take care to avoid damaging the finish of
your instrument. Do not attach the tuner to your instrument if any of the rubber pads are broken or missing.
Attach the clamp to the headstock (placing the
body of the tuner either in front of or behind the
headstock).
After attaching the tuner to your instrument, adjust
the “banana” shaped arm that connects the tuner to
the clamp for optimum viewing of the tuner display.
Also, the tuner body rotates 360 degrees so the
display can be placed right where you want it.
USING YOUR SNARK®H.Z.™
POWER UP & TUNING
Once you have attached the Snark to your
instrument, turn it on by pressing the ON button on
the face of the tuner.
Tune all strings.
HZ BUTTON
Press Hz button on back of tuner to activate
Hz tuning.
a. Tune each string as many times as you wish,
but keep going in order. (see charts)
b. Hint: You don’t have to perfectly “nail” the
right Hz readings, in fact some slight
variations might sound better to your ear.
c. To cancel Hz tuning, press ON button again
or wait for time out in 10 seconds.
d. You can re-start Hz tuning by pressing the
Hz button again.
HERTZ TUNING CHARTS
FEATURES
Hz Button
Battery
Door
Ball Joint
LCD
Display
ON/OFF
Instrument
Clamp
For 6 string guitars, tune strings in
ASCENDING ORDER:
Target Hz
First LOW E. . . . . . . . . . . . . . . . . . . 82.4
Second A . . . . . . . . . . . . . . . . . . . . 110.0
Third D. . . . . . . . . . . . . . . . . . . . . . 146.8
Fourth G. . . . . . . . . . . . . . . . . . . . . 196.0
Fifth B . . . . . . . . . . . . . . . . . . . . . . 246.9
Sixth HIGH E. . . . . . . . . . . . . . . . . . 329.6
For 4-5 string bass guitars, tune strings in
DESCENDING ORDER:
Target Hz
First G . . . . . . . . . . . . . . . . . . . . . . . 98.0
Second D . . . . . . . . . . . . . . . . . . . . . 73.4
Third A . . . . . . . . . . . . . . . . . . . . . . . 55.0
Fourth E. . . . . . . . . . . . . . . . . . . . . . 41.2
Fifth B (if 5 string) . . . . . . . . . . . . . 30.95