Snapper W48120S User Manual

Specifications and Main Features

  • Model Numbers: W32080, W36120, W48120, W32120, W36120K, W48120K, W32120K, W48140S
  • Mower Sizes: 32 inch, 36 inch, 48 inch
  • Engines: Kawasiki or Briggs & Stratton
  • Engine Horsepower: 12 h.p. for some models with a variation being specific
  • Drive System: Gear drive with wheel-drive belts
  • Cutter Deck: can cater a height range of 1.5 inch to 5 inches
  • Number of Modes: A total of ten modes.
  • Safety Features: System of interlock switch along with drive lever which could be in neutral lock position.
  • Fuel Tank: A shut off valve is attached.
  • Brake/Propel Mechanism: with a single lever, you can also brake and propel forward.
  • Weight: Not available from the manual.
  • Maintenance: Requires lubrication, adjusting operations as outlined in maintenance chart periodically.
  • Tire Pressure: Pressure recommended for rear and front tires 14 psi with 30 psi recommended for front tires.
  • Blade Specifications: instructions for blade removal and replacement are included , along with recommended torque settings.
  • Warranty Information: Does not appear on the provided text

Frequently Asked Questions

Q: What engines can be found in Snapper mowers?

A: The engines found in Snapper mowers are Kawasiki or Briggs & Stratton.

Q: What is the maximum range of cutting heights that the mower offers?

A: Ten variable ranges of cutting are available, the minimum of which is 1.5 inches and a maximum of 5 inches.

Q: Is it correct to state that this mower has safety implements?

A: Yes, interlock switches are installed on the mower that will disable the engine from starting if the cutting-blade drive system is engaged or the drive levers are not neutral.

Q: Can I ask you what the specifications are for the tire pressure of the mower?

A: Tire pressure refers to generalized standards of approximately 14 psi in the rear tires while the front tires amount to 30 psi.

Q: How frequently am I supposed to carry out a maintenance check of the mower?

A: These maintenance checks are to be conducted after satisfactory periods of time in succession, after each mowing period or every hundred hours, and each set of tasks will be carried out according to a maintenance chart.

User Manual

Snapper W48120S User Manual
Loading...
+ 18 hidden pages