Snapper SX5200E -1 User Manual
Parts Manual for
SINGLE STAGE
SNOW THROWER
SERIES 0
MODELS
SX5200R
SX5200E
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
(Rev. 4, 6/30/02) MANUAL No. 06016
HANDLES, BLADE CONTROL
4
5
3
13
12
1
2
16
7
11
9
6
8
10
6
14
15
17
MANUAL No. 06016 SINGLE STAGE SNOW THROWER
2
HANDLES, BLADE CONTROL
ITEM PART NO. DESCRIPTION
1 4-1946 HANDLE, Upper
2 1-4343 BUSHING, Auger Control (2)
3 2-8309 DECAL, Auger Control Instruction
4 1-7072 CONTROL, Auger
5 3-3904 CLIP, Auger Control
6 4-6363 KNOB, 1/4-20 Wing (Black) (2)
7 3-5744 KNOB, 5/16-18 Wing
8 4-2723 BRACKET, Lower Handle (Left Side)
9 9-1083 BOLT, 1/4-20 x 2” Square Neck Carriage, Grade 5 (2)
10 4-2724 BRACKET, Lower Handle (Right Side)
11 9-1070 NUT, 5/16-18 Hex Flange Lock, Grade 5
12 1-7623 EYE-BOLT, 5/16-18
13 1-7622 GROMMET, Chute Crank
14 9-1064 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (4)
15 9-1065 NUT, 1/4-20 Hex Flange Lock (4)
16 2-3813 CLIP, Wiring Harness
17 1-2485 RETAINER, 1/4” Bolt (4)
SINGLE STAGE SNOW THROWER MANUAL No. 06016
3
COLLECTOR HOUSING, BELTS, PULLEYS, AUGER
A
2
6
1
38
39
3
36
3534
36 ASSEMBLY
33
41
37
39
37
15
17
9
16
18
10
17
12
19
5
10 14
4
24
8
2625
36B
13
20
23
22
2127
11
30
42
21
MANUAL No. 06016 SINGLE STAGE SNOW THROWER
31
32
14
28
4
29
17
COLLECTOR HOUSING, BELTS, PULLEYS, AUGER
ITEM PART NO. DESCRIPTION
1 4-1850 WELDMENT, Blower Housing
2 1-8796 CABLE, Clutch
3 9-0584 BOLT, 1/4-20 x 1/2” Hex Flange Lock (2)
4 9-1283 BOLT, #10-24 x 5/8”Flat Head Carriage (4)
5 9-0372 NUT, 1/4-20 Hex Center Lock
6 4-1952 STRAP, Engine
7 9-0187 WASHER, 5/16 Split Lock (no longer used with item 13)
8 2-8427 SCRAPER, Blade
9 1-0008 KEY, #6 x 5/8” Woodruff
10 2-8363 PULLEY, Engine
11 2-8312 BLADE, Wear Indicator
12 1-4098 WASHER, .343 I.D. x 1” O.D. Flat
13 7-2621 SCREW, 5/16-24 x 3/4” Hex Head Cap w/patch lock, Grade 5
* 6-1382 KIT, Engine Pulley (Includes items 10, 12, 13 & 1 item 7)
14 9-1079 NUT, #10-24 Hex Flange Lock (5)
15 9-1075 SCREW, #10-24 x 5/8” Self-Tap
16 3-2345 GUIDE, Belt
17 9-0981 SCREW, #10-32 x 1/4” Slotted Hex Washer Head, Self-Tap (20)
18 5-1506 ASSEMBLY, Idler Arm
19 1-4722 PULLEY, Idler Arm
20 9-1067 NUT, 5/16-18 Hex Center Lock (2)
21 9-1076 WASHER, 5/16 Flat (2)
22 1-4920 SPRING, Idler Brake
23 1-4919 SPACER, Bearing
24 1-4608 BEARING, Auger (2)
25 4-2722 RETAINER, Bearing (2)
26 1-0935 WASHER, 3/4” Flat
27 1-8635 PULLEY
28 4-1947 BELT, Auger 32.89
29 1-9753 COVER, Belt
-- 5-2309 ASSEMBLY, Auger (Includes items 30 thru 33)
30 4-7027 AUGER Structure 20”
31 1-4612 SHOE, Flight, Center (2)
32 9-1286 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Sems) (28)
33 2-9565 SHOE, Flite (4)
** 6-0631 KIT, Flite Shoe (Includes 2 item 31 & 4 item 33)
34 4-1958 DECAL, Model (Recoil)
-- 4-6308 DECAL, Model (Electric Start)
35 4-6307 DECAL, Model, Auger Housing (Recoil)
-- 4-6309 DECAL, Model, Auger Housing (Electric Start)
36 5-1560 ASSEMBLY, Bracket/Bushing (Includes 36A & 36B)
36A 3-2459 BRACKET, Cable Guide
36B 1-5146 BUSHING, Nylon
37 9-1084 SCREW, 1/4-20 x 3/8” Hex Washer Self-Tap (4)
38 4-1953 BRACKET, Fuel Tank
39 9-1070 NUT, 1/4-20 Hex Flange Lock, Grade 5
40 9-1246 SCREW, 1/4-20 x 3/4” Pan Head Self-Tap (Torx)
41 9-1064 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (4)
42 9-0361 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
*NOTE: Order Complete Assembly by Kit Number.
**NOTE: Order items 31 & 33 by Kit Number.
SINGLE STAGE SNOW THROWER MANUAL No. 06016
5
Loading...