Snapper SP60V User Manual

UNFOLDING AND ADJUSTING LOWER HANDLE
4
Not for Reproduction
Pull and rotate the handle knobs (1) 90° to the unlocked position
on both sides to loosen the lower handles (2) on both sides.
Move the lower handles to the operating position. You may raise or lower the handle to a position comfortable for you. There are 3 positions (3) for you to choose. Rotate the handle knobs to the locked position to lock the lower handle into position.
2
1
WARNING:
This Quick Start Guide is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user must read and understand operator's manual before using this product.
STARTING/STOPPING THE MOWER
To start the motor:
Open the battery door (1).
Insert the battery (2).
Press and hold the safety lock-out button (3).
Pull the bail lever (4) upward to the handle to start the mower and release the button.
To stop the motor:
Release the bail lever.
21” 60V LAWN MOWER
Model SP60V
INSTALLING THE GRASS CATCHER BAG
Lift the rear discharge door (1).
(3) 3 positions
INSTALLING THE UPPER HANDLE
Align the upper handle (1) with the lower handle (2) on both sides. Slide the handle bolts (3) through the holes in the handles and tighten with the handle knobs (4) on both sides. If the connection is not stiff, hand tighten the handle knobs.
2
3
Unlocked position
1
Lift the grass catcher by its handle (2) and place under the rear discharge door so that the hooks (3) on the grass catcher are seated on the door rod (4).
Release the rear discharge door. When installed correctly, the hooks on the grass catcher will extend through the openings on the rear discharge door. NOTE: When using the grass catcher, do not install either the side discharge deflector or the mulching plug.
INSTALLING/REMOVING THE MULCHING PLUG
To remove the mulching plug, lift the rear discharge door (1).
Grasp the handle (2) of the mulching plug and pull the mulching plug out using the handle.
The mulching plug (3) is inserted at an angle, so it requires some force to remove it.
The mulching plug must be removed in order to install the grass catcher bag.
The mulching plug must be re-installed when the grass catcher bag is removed. NOTE: When mulching, do not install either the side discharge deflector or the grass catcher bag.
INSTALLING SIDE DISCHARGE CHUTE
Lift the side discharge cover (1).
Align the grooves (2) on the discharge chute (3) with the pins (4) on the underside of the discharge cover (1).
Lower the discharge chute until the hooks on the mower deck are secured in the openings in the discharge chute.
Release the side discharge cover. NOTE: When using side discharge, do not install the the grass catcher bag. Ensure the mulch plug is installed.
2
2 3
2
2
1
1
4
CUTTING HEIGHT ADJUSTMENT
To raise the blade height, grasp the height adjustment lever
3
1
1
4
3
(1) and move it toward the back of the mower.
To lower the blade height, grasp the height adjustment lever (1) and move it toward the front of the mower.
Rev. 0 08/19/15 Printed in China
4
A
3
1
B
1
Loading...