Snapper SPA360, SP360 User Manual

Parts Manual for

PRO HYDRO

MID-SIZE

WALK BEHIND MOWERS

SERIES 0

MOWER UNIT MODELS

SP360 SP480 SP520 SPA360 SPA480 SPA520 SPA610

IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

POWER UNIT MODELS

SPLH140KW SPLH140KH SPLH140KWE SPLH150KH SPLH160BV SPLH170KW SPLH180KHE SPLH220KHE

Model SPLH140KW shown

(Rev. 2, 12/28/01) MANUAL No. 06926

ACCESSORIES

The following kits, available from your local SNAPPER dealer, are compatible with your SNAPPER Pro Hydro Mid-Size Walk-Behind mower:

6-1105 Kit, Hard Plastic Grass Catcher (requires 6-1110)

6-3108 Kit, Cloth Grass Catcher (requires 6-1110)

6-1176 Kit, Pro 7 Sulky

6-1851 Kit, Mulching for 36” Deck

6-1854 Kit, Mulching for 48” Deck

6-1852 Kit, Mulching for 52” Deck

6-1300 Kit, Corner Roller

6-1853 Kit, Grass Catcher Mounting Plate

MANUAL No. 06926 PRO HYDRO MID-SIZE WBM SERIES 0

CONTENTS

DESCRIPTION PAGE

FUEL TANK ASSEMBLY..................................................................................................... 4

TANK BRACKET ASSEMBLY............................................................................................. 5

REAR DECK ASSEMBLY................................................................................................ 6, 7

POWER UNIT IDLER ASSEMBLY....................................................................................... 8

ENGINE SUB-ASSEMBLY................................................................................................... 9

DECALS....................................................................................................................... 10, 11

PUMP AND SHELF ASSEMBLIES .............................................................................. 12, 13

HOSE ASSEMBLY....................................................................................................... 14, 15

LOOP HANDLE AND CONTROL ASSEMBLIES......................................................... 16, 17

TRACKING CONTROL ASSEMBLIES ........................................................................ 18, 19

TRACTION, REAR WHEEL ASSEMBLY........................................................................... 20

CASTER, WHEEL AND TIRE ASSEMBLY ........................................................................ 21

CUTTER HOUSING ASSEMBLY ....................................................................................... 22

36” DECK IDLER ASSEMBLY .......................................................................................... 23

48” & 61” DECK IDLER ASSEMBLY ................................................................................ 24

52” DECK IDLER ASSEMBLY .......................................................................................... 25

36” MOWER DECK ASSEMBLY (Fixed Height) ........................................................ 26, 27

48” & 52” MOWER DECK ASSEMBLY (Fixed Height) .............................................. 28, 29

36” MOWER DECK ASSEMBLY (Adjustable Height)................................................ 30, 31

48”, 52” & 61” MOWER DECK ASSEMBLY (Adjustable Height)....................... 32 thru 35

WIRING SCHEMATICS................................................................................................ 34, 35

ELECTRICAL COMPONENTS (Manual & Electric Start)........................................... 36, 37

ACCESSORIES.................................................................................................................. 38

PRO HYDRO MID-SIZE WBM SERIES 0 MANUAL No. 06926

FUEL TANK ASSEMBLY

(

)

(

)

(SEE NOTE 1)

TO PUMP OVERFLOW

LEFT SIDE

FUEL TANK BRACKET SEE PAGE 4 FOR BREAKDOWN

TO PUMP OVERFLOW

LEFT SIDE

ITEM PART NO. DESCRIPTION

1 2-8903 CAP, Fuel 2 2-8899 TANK, Fuel (Includes Item 1) 3 3-4923 STRAP, Fuel Tank (2) 4 9-1052 SCREW, #10-24 x 2” Pan Head (2)

NOTES:

1) USE PERMATEX #2 FOR THREAD SEALER IF REQUIRED.

5 2-9039 PLUG, 1/4 NPTM Pipe (2) 6 9-0594 NUT, #10-24 Nyloc (2) 7 1-2222 CLAMP, Fuel Hose (6 ea. Kawasaki) (4 ea. Kohler 14HP; 4 ea. Kohler 18HP &

Briggs)

8 3-2956 HOSE, Fuel, 10” Long (Trim to suit) (Kohler 14HP & Briggs 16HP)

-- 2-4055 HOSE, Fuel 6-1/2” Long (Kohler 18HP)

-- 7-6272 HOSE, Fuel 8-1/2” (Kawasaki 4HP) 9 1-6325 VALVE, Fuel Shut-Off 10 1-4359 FILTER, Fuel In-Line (Kawasaki Only) 11 2-6945 CAP, Hydraulic 12 2-8972 TANK, Reservoir 13 2-9159 FITTING, 45 Degree 1/4 FPT Elbow (2) 14 2-7115 FITTING, 90 Degree 15 2-7104 FITTING, Straight 1/4 (2) 16 2-7111 FITTING, 90 Degree O-Ring (2) 17 2-8912 HOSE, 10-1/2” Hydraulic (2) 18 3-2956 HOSE, Fuel, 10” (Kawasaki 14HP, Kohler 14HP & Briggs 16HP)

-- 7-7351 HOSE, Fuel, 3-1/2” (Kohler 18HP) 19 7-7351 HOSE, Fuel, 3-1/2” (Kawasaki 14HP)

MANUAL No. 06926 PRO HYDRO MID-SIZE WBM SERIES 0

TANK BRACKET ASSEMBLY

BOLTS TO REAR DECK (item 15 on page 6)

ITEM PART NO. DESCRIPTION

1 4-2584 BRACKET, Hydraulic Tank 2 2-6977 BRACKET, Regulator 3 9-0599 SCREW, 5/16-18 x 3/4”,

Round Head Machine (2) 4 90717 NUT, 5/16-18 Hex Nyloc (2) 5 2-8983 REGULATOR/RECTIFIER 6 2-7230 SCREW, 1/4-20 x 1”, Grade 5

(2) (Qty 4 For Kawasaki) 7 9-1705 NUT, 1/4-20 Hex Nyloc (5) 8 2-4185 CABLE, Choke (incl. hardware

(Briggs & Kohler 18 HP) 9 2-7168 SCREW, 5/16-18 x 1” Hex

Head Cap, Grade 5 (2) 10 2-7198 BOLT, 3/8-16 x 1” Hex Flange

Lock (6) 11 7-6979 NUT, 3/8-16 Nyloc (6)

PRO HYDRO MID-SIZE WBM SERIES 0 MANUAL No. 06926

ITEM PART NO. DESCRIPTION

12 9-1304 SCREW, 3/8-16 x 1” Hex

Head Cap, Grade 5

13 9-1704 NUT, 3/8-16 Hex Top Lock,

Grade B (2) 14 4-1765* TRAY, Battery 15 3-4851* BRACE, Battery 16 1-8604* SOLENOID, 12 Volt 17 9-1495 SCREW, 1/4-20x3/4”,Gr. 5 (2) 18 9-1705 NUT, 1/4-20 Hex Top Lock (2) 19 9-1314* WASHER, 1/4” Int. Tooth Lock (2) 20 9-0932* NUT, Battery Terminal (2) 21 2-8913* J-BOLT (2) 22 9-1537* WING LOCKNUT, 5/16-18 (2) 23 3-4837* STRAP, Battery Clamp 24 6-0974* KIT, Battery

NOTE: Items with * are used on SPLH180KHE only.

REAR DECK ASSEMBLY

23 (Hub Down)

SEE PAGE 20 FOR TRACTION WHEEL ASSEMBLY BREAKDOWN

MANUAL No. 06926 PRO HYDRO MID-SIZE WBM SERIES 0

REAR DECK ASSEMBLY

ITEM PART NO. DESCRIPTION

1 1-6147 SPACER, Clutch (Model Year 97 Hydro uses 2)

2 9-0247 WASHER, 7/16” Split

3 2-6978 BRACKET, Capacitor (Kawasaki Engines Only)

4 9-1029 SCREW, M10-1.5 x .55 Hex Head Cap (Kawasaki)

-- 2-7266 BOLT, 7/16-20 x 3” Hex Head Cap, Grade 5 (Briggs & Kohler)

5 2-7264 BUSHING, 1-1/2” O.D. x 1” I.D.

6 3-4801 BRACKET, Pivot

7 3-4802 BRACKET, Wheel (2)

8 3-4829 BRACKET, Clutch (not used if item 28 is used)

9 9-1303 BOLT, 5/16-18 x 1”, Round Head Short Square Neck, Grade 5

10 9-1527 SCREW, 5/16-18 x 1-1/4”, Grade 5 (3)

11 9-0563 SCREW, 3/8-16 x 1”, Hex Head Cap Grade 5 (12)

12 9-1706 NUT, 5/16-18 Top Lock, Grade B

13 9-1704 NUT, 3/8-16 Hex Top Lock, Grade B (14)

14 1-7063 CLUTCH, Electric

15 4-1745 DECK, Rear (Weldment)

16 2-7194 NUT, Pack (2)

17 9-0206 SCREW, 5/16-18 x 3/4”, Grade 2 (3)

18 2-7215 CAPACITOR, Kawasaki Engine

19 2-9615 V-BELT, HA4950 Engine/Hydro (49.50” Effective Length)

20 2-7128 MOTOR, Wheel (2)

21 2-9704 BUMPER, Electric Clutch

22 3-4448 SUPPORT, Electric Clutch Bumper

23 2-7132 PULLEY, Engine/Hydro 4”

24 9-1719 KEY, 1/4” Square X 1”

25 2-9255 BELT, Engine/Deck (36”)

-- 2-9267 BELT, Engine/Deck (52”)

-- 2-9269 BELT, Engine/Deck (61”)

26 1-5861 CLIP, Harness (Briggs Only)

27 1-2830 KEY, 3/16” Square x 3/4” (2)

28 4-2663 BRACE, Engine Frame (used on models indicated by “X” in table below)

(See Note Below)

29 1-5861 CLIP, Harness (for battery drain hose, SPLH180KHE only)

*NOTE: THERE ARE ONLY CERTAIN MODELS THAT USE ENGINE FRAME BRACE 4-2663. USE

CHART FOR SPECIFIC POWER/UNIT/MOWER UNIT COMBINATIONS.

PRO HYDRO MID-SIZE WBM SERIES 0 MANUAL No. 06926

POWER UNIT IDLER ASSEMBLY

ITEM PART NO. DESCRIPTION

1 9-1704 NUT, 3/8-16 Hex Top Lock (2) 2 7-6998 FITTING, 1/4-28 Lube 3 2-6886 IDLER Weldment 4 9-0517 WASHER, 3/8 Flat 5 2-7129 PULLEY, Idler 6 2-7220 BOLT, 3/8-16 x 3-1/4”, Grade 5 7 1-6173 SPACER, Pivot 8 2-7221 BOLT, 3/8-16 x 3-1/2”, Grade 5

9 2-7124 SPRING, Idler Tension 10 1-6561 BUSHING, 14 GA Spacer 11 9-0130 NUT, 3/8-16

MANUAL No. 06926 PRO HYDRO MID-SIZE WBM SERIES 0

ENGINE SUB-ASSEMBLY

7A, 7B

** PURCHASE ENGINE & ENGINE PARTS

OTHER THAN THOSE LISTED, FROM ENGINE SERVICE OUTLETS.

ITEM PART NO. DESCRIPTION

1 ** ENGINE, 14HP Kawasaki (Spec. No. FC420V-DS09)

-- ** ENGINE, 14HP Kohler (Model CV14T; Spec No. PS-1464) (Shown)

-- ** ENGINE, 14HP Kawasaki (Spec. No. FC420V-HS01) Electric Start

-- ** ENGINE, 15HP Kohler (Model CV15T; Spec. No. PS-14579)

-- ** ENGINE, 16HP Briggs (Mod. 303776, Type 1046, Trim A2, Vanguard V-Twin

-- ** ENGINE, 17HP Kawasaki (Spec. No. FH500V)

-- ** ENGINE, 18HP Kohler (Model CV18ST; Spec No. PS551192)

-- ** ENGINE, 22HP Kohler (Model CV22S; Spec. No. PS-75512)

2 9-1631 SCREW #10-24 x 1/2” Hex Head Machine (Briggs only)

3 9-1267 NUT, #10-24 Hex Center Lock (Briggs only)

4 9-1649 SCREW, #8-18 x 9/16” (2 for Briggs; 4 for Kohler 18HP)

5 3-4653 SHIELD, Heat (Briggs only)

6 2-8958 SHIELD, Heat (Kohler 18HP only)

7A 7-7692 SCREW, M8-1.25 x 25mm Hex Head Self-Tap, Grade 8.8 (4) (14 HP engines)

7B 9-1540 SCREW, 5/16-18 x 1-1/2”, Grade 5 (4) (Briggs & Kohler 18HP)

8 9-0010 WASHER, #10 Flat

9 4-3813 ASSEMBLY, Clamp (Includes Clamp, U-Bolt, 2 Split Lock Washers and

2 Hex Nuts) (used on SPLH180KHE only)

10 4-3814 ELBOW, Exhaust (used on SPLH180KHE only)

PRO HYDRO MID-SIZE WBM SERIES 0 MANUAL No. 06926

DECALS

ITEM PART NO. DESCRIPTION

1 7-3647 DECAL, Warning 2 1-3010 DECAL, Warning 3 2-9470 DECAL, Patent Numbers 4 2-9866 DECAL, Caution Pro Hydro 5 4-3816 DECAL, Oil (Adjustable Decks only) 6 2-4156 DECAL, Caution 7 4-3815 DECAL, Caution (Adj. Decks only) 8 2-2889 DECAL, Caution

MANUAL No. 06926 PRO HYDRO MID-SIZE WBM SERIES 0

DECALS

ITEM PART NO. DESCRIPTION

1 4-6580 DECAL, Snapper Pro 2 2-4903 8” MOLDED LOGO, SNAPPER 3 2-9042 DECAL, Left Panel, Throttle 4 2-9311 DECAL, Left Panel, Throttle w/o Choke 5 2-9045 DECAL, Right Panel, Instruction 6 2-9310 DECAL, Right Panel, Switch, E. Start 7 2-9044 DECAL, Right Panel, Switch 8 2-9041 DECAL, Left Panel, Switch

PRO HYDRO MID-SIZE WBM SERIES 0 MANUAL No. 06926

PUMP AND SHELF ASSEMBLIES

MANUAL No. 06926 PRO HYDRO MID-SIZE WBM SERIES 0

+ 28 hidden pages

Snapper SPA360, SP360 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

DESCRIPTION PAGE

ITEM PART NO. DESCRIPTION

DECALS