Parts Manual for
LAWN TRACTOR ACCESSORIES
FOR ALL SMALL FRAME LAWN TRACTORS
WITH DISC, GEAR & HYDRO DRIVE
SERIES 0, 1, 2 & SERIES A, B, C, D, E, F, G, H, I
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
(Rev. 1, 1/24/03) MANUAL No. 06613
CONTENTS
LAWN TRACTOR MODEL IDENTIFICATION
Positive identification of the machine will be necessary. Identify the machine with the model
number to insure the correct kit is used for that model. The series number or letter of the
model number is used in this manual to match the correct kit with the correct model. Refer
to Owner’s Manual for correct Series number. The series number for all disc, gear and hydro
drive two piece frame models is 0, 1, 2. The series number for all gear and hydro drive one
piece frame models is A thru I. The Series number examples are as follows:
Lawn Tractor (Disc Drive Two Piece Frame) Example: LT12D330B - Series number is 0.
Lawn Tractor (Disc Drive Two Piece Frame) Example: LT115D411KV - Series number is 1.
Lawn Tractor (Gear Drive Two Piece Frame) Example: LT115G411KV - Series number is 1.
Lawn Tractor (Hydro Drive Two Piece Frame) Example: LT140H412KV - Series number is 2.
Lawn Tractor (Hydro Drive One Piece Frame) Example: LT160H42ABV - Series letter is A.
Lawn Tractor (Gear Drive One Piece Frame) Example: LT120G38AB - Series letter is A.
Lawn Tractor (Gear Drive One Piece Frame) Example: BH120G38BB - Series letter is B.
KIT No. DESCRIPTION PAGE
6-0609 Tire Chain (For 18” X 6.50” Tire)..........................................................................4
6-1085 Tire Chain (For 18” X 8.50” Tire)..........................................................................4
6-1399 Tire Chain (For 18” X 9.5” Tire)............................................................................4
6-1333 Tire Chain (For 20” X 10” Tire).............................................................................4
6-1245 Rear Weight..................................................................................................4 & 5
6-0870 Thatcherizer (LT12D Series) ........................................................................6 & 7
6-1247 Thatcherizer (1 Piece Frame Models) ..........................................................8 & 9
6-0737 Anti-Scalp Wheel (33” Deck).............................................................................10
6-0794 Anti-Scalp Wheel (41” Deck).............................................................................10
6-1400 Anti-Scalp Wheel (33” Deck).............................................................................11
6-3128 Anti-Scalp Wheel (48” Deck).............................................................................11
6-0943 33” Single Bag Grass Catcher ...............................................................12 & 13
6-1312 38” Single Bag Grass Catcher (For Hydro Drive Models).......................14 & 15
6-1886 38” Single Bag Grass Catcher (Replaced 6-1249)..................................16 & 17
6-0944 41 & 42” Single Bag Grass Catcher .......................................................18 & 19
6-3289 Debris Shield Kit, (For All Single Bag Catchers)................. 14 & 15, 16 & 17, 19
6-3281 33” Twin Bag Grass Catcher (6-1334 Adapter Kit Required)..................20 & 21
6-1248 38” Twin Bag Grass Catcher (6-1334 Adapter Kit Required)..................22 & 23
6-1888 38” Twin Bag Grass Catcher (6-1334 Adapter Kit Required)..................22 & 23
6-0945 41” Twin Bag Grass Catcher...................................................................24 & 25
6-3131 33” Clamshell Grass Catcher (6-1334 Adapter Kit Required).................26 & 27
6-3126 38” Clamshell Grass Catcher (6-1334 Adapter Kit Required).................28 & 29
6-1334 Grass Catcher Adapter (1 Piece Frame Models Series. A Thru D)..................30
6-1068 Grass Catcher Adapter (Hydro and Gear Drive)...............................................31
6-1311 Grass Catcher Adapter (Hydro Drive; w/20-10.00 X 8 Tires)............................31
6-0860 Grass Catcher Adapter (LT12D Series)............................................................32
(continued on next page)
MANUAL No. 06613 LT SERIES (Small Frame)
2
(continued)
KIT No. DESCRIPTION PAGE
6-1308 Bag-N-Wagon Adapter (Series “A” 1-Piece Frame)..........................................33
6-0957 Bag-N-Wagon Adapter (LT12D Series).............................................................34
6-1089 Bag-N-Wagon Adapter (Hydro and Gear Drive)................................................35
6-3123 Front Bumper Kit (1-Piece Frame Only) ...........................................................36
6-3203 Water Bottle Kit.................................................................................................36
6-1320 Implement Lift Lever Kit (Ground Following Deck Units Only).........................37
6-3240 Bearing Pre-Seal Kit (For 48” Field Replaceable Spindle Decks Only).............37
6-0697 Dump Wagon............................................................................................38 & 39
6-0947 Bag-N-Wagon (Complete).........................................................................40 & 41
6-0734 Bag-N-Wagon (Hitch & Wagon Body).......................................................42 & 43
6-0964 Bag-N-Wagon (Cover Assembly)..............................................................44 & 45
6-0873 36” Snow Blade (3-Piece Frame).............................................................46 & 47
6-1347 42” Snow Blade (3-Piece Frame, Series 1 & 2) .......................................48 & 49
6-1352 42” Snow Blade (1-Piece Frame Hydro Only)..........................................50 & 51
(6-1370 Snow Blade Support Required For Mounting 6-1352 Kit)
6-1370 Snow Blade Support Kit ...................................................................................52
6-1781 Snow Thrower Support Update Kit..................................................................52
6-0720 Lift Handle..........................................................................................................53
6-1254 30” Recycling ....................................................................................................54
6-1051 33” Recycling ....................................................................................................55
6-1255 33” Recycling (Ninja Blade)...............................................................................56
6-1257 38” Recycling/Mulcher (Ninja Blade)................................................................57
6-1877 38” Recycling(Wave Blade) ..............................................................................58
6-1878 38” Recycling Kit (Ninja Blade).........................................................................58
6-1220 41” Recycling Cover (Ninja Blade)....................................................................59
6-1987 42” Recycling Cover (Ninja Blade)....................................................................60
6-3110 48” Wave Mulching Kit .....................................................................................61
6-1094 Hood Replacement (Gear Drive Series 0)................................................62 & 63
6-1383 Hood Replacement (1 & 3-Piece Frame) .................................................64 & 65
3-2392 Smooth Clutch Tool..........................................................................................66
6-0327 Wheel Hub Puller Kit.........................................................................................66
6-0694 Yoke Spring Attachment...................................................................................66
6-1000 Reverse Assist Spring (LT12D Series).............................................................66
6-1025 Brake Cable Extension.....................................................................................66
6-1163 Cold Starting (Hydro Drive Series) ....................................................................66
6-0691 Chute Brace (Snow Thrower Attachment) .........................................................66
6-1289 30” Cutting Deck Replacement (Gear Drive)...................................................66
6-1288 33” Cutting Deck Replacement (Gear Drive)...................................................66
6-1290 38” Cutting Deck Replacement (Gear Drive)...................................................66
6-1314 38” Cutting Deck Replacement (Hydro Drive)..................................................66
6-1299 38” Cutting Deck Replacement (Ground Following) (Gear Drive)....................66
6-1283 42” Cutting Deck Replacement (Gear Drive)...................................................66
6-1266 48” Cutting Deck Replacement (Hydro Drive)..................................................66
6-1335 Pivot Arm Replacement Kit (LTD Series 0)......................................................66
6-1787 Drive Disc Alignment Gauge Kit ......................................................................66
LT SERIES (Small Frame) MANUAL No. 06613
3
ACCESSORY, TIRE CHAINS
#6-0609 KIT, Tire Chains (18x6.50-8” Tires) (Contains 2 Chains)
#6-1085 KIT, Chain for LTD & LTH (18x8.50-8” RS Tires) (Contains 2 Chains)
#6-1399 KIT, Tire Chains (18x9.50 Tires) (Contains 2 Chains)
#6-1333 KIT, Tire Chains (20x10.00 Tires) (Contains 2 Chains)
ACCESSORY, REAR WEIGHT #6-1245
8
7
6
7
6
5
2
8
1
9
MANUAL No. 06613 LT SERIES (Small Frame)
4
6-1245 ACCESSORY, REAR WEIGHT
SERIES 1 & 2 SERIES A & B
ITEM PART NO. DESCRIPTION
-- 6-1245 REAR WEIGHT KIT
1 3-4103 BRACKET, Weight Holder
2 1-9759 WEIGHT, 38 LB. (2)
3 3-4172 SUPPORT, Stand-Up Tube (R.H.)
4 3-4173 SUPPORT, Stand-Up Tube (L.H.)
5 1-5002 ROD, 3/8-16 x 9” Threaded (2)
6 9-1514 WASHER, 3/8 Flat (4)
7 9-1320 WASHER, 3/8 Split Lock (4)
8 9-1302 NUT, 3/8-16 Hex, Grade B or 5 (4)
9 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (8)
10 9-1592 BOLT, 5/16-18 x 2”, Hex Flange Lock, Grade 5 (4)
11 9-1591 BOLT, 5/16-18 x 1”, Hex Flange Lock, Grade 5 (4)
LT SERIES (Small Frame) MANUAL No. 06613
5
ACCESSORY, THATCHERIZER (LT12D Series) 6-0870
32
31
30
33
30
32
20
7
30
22
6
30
20
16
8
16
21
16
18
4
17
12
26
29
9
17
17
18
16
18
11
16
12
13
18
17
16
14
17
18
17
24
23
27
25
34
16
15
29
28
5
3
2
22
1
10
22
19
MANUAL No. 06613 LT SERIES (Small Frame)
18
17
6
6-0870 ACCESSORY, THATCHERIZER (LT12D Series)
ITEM PART NO. DESCRIPTION
-- 6-0870 THATCHERIZER KIT
1 1-9947 TRAY, Tine
2 2-3565 DECAL, Adjustment
3 1-4062 DECAL, Thatcherizer
4 2-3564 BRACKET, Frame Mounting (2)
5 1-4110 ROD, Tine (2)
6 1-8700 SUPPORT, Wheel
7 1-8189 WHEEL, 7 x 1.50 V21
8 1-8493 AXLE, Wheel
9 1-7046 ASSEMBLY, Mounting Bracket Mechanism
10 1-8491 TINE, Thatching (8)
11 1-9150 BRACKET, Lift
12 2-3532 BAR, Thatcher Mount (2)
13 1-9135 BAR, Mount Brace (2)
14 1-9137 HANDLE, Lift
15 1-9136 BRACKET, Lift Lock
16 9-0383 BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5 (22)
17 9-0196 NUT, 5/16-18 Hex (24)
18 9-0187 WASHER, 5/16” Split Lock (22)
19 1-4098 WASHER, 5/16” Flat (8)
20 9-0250 WASHER, 1/2” SAE Flat (2)
21 9-0015 BOLT, 1/4-20 x 1-3/4” Square Neck Carriage, Grade 2 (2)
22 9-0761 NUT, 1/4-20 Hex Top Lock (6)
23 9-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5
24 9-0130 NUT, 3/8-16 Hex
25 9-0118 WASHER, 3/8 Split Lock
26 1-3113 PIN, Hair
27 1-4780 STRAP, Handle Retaining
28 1-4779 PIN, Clevis
29 9-0692 WASHER, 5/16” Flat (3)
30 1-4342 BEARING, Nylon (4)
31 1-4100 BUSHING, Wheel Adjustment
32 1-4101 NUT, 1/2” Push (2)
33 1-4103 SCREW, 5/16-18 x 1/4” Set
34 1-4784 GRIP, Vinyl
LT SERIES (Small Frame) MANUAL No. 06613
7
ACCESSORY, THATCHERIZER 6-1247
(for 1-Piece Frame Tractors)
MANUAL No. 06613 LT SERIES (Small Frame)
8
6-1247 ACCESSORY, THATCHERIZER
(for 1-Piece Frame Tractors)
ITEM PART NO. DESCRIPTION
-- 6-1247 KIT, Thatcherizer (Includes items 1 thru 35)
1 1-9947 TRAY, Tine
2 1-8491 TINE, Thatching (8)
3 1-8700 SUPPORT, Wheel
4 1-8493 AXLE
5 1-8189 WHEEL, Gauge
6 1-4110 ROD, Tine (2)
7 1-4778 BRACKET, Frame Mounting (2)
8 3-4184 SUPPORT, Lift Handle
9 4-1609 WELDMENT, Hitch Bar
10 1-4781 ASSEMBLY, Main Frame Weldment
11 9-0692 WASHER, 5/16 SAE Flat (3)
12 1-4113 LATCH, Frame Mount (2)
13 1-8666 BRACKET, Lift
14 3-4183 HANDLE, Lift
15 2-7168 SCREW, 5/16-18 x 1” Hex Head Cap, Grade 5
16 9-0798 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage (2)
17 9-0383 BOLT, 5/16-18 x 1” Square Neck Carriage, Grade 5 (15)
18 1-4098 WASHER, Reinforcing (9)
19 9-0187 WASHER, 5/16” Split Lock (15)
20 9-0196 NUT, 5/16-18 Hex, Grade 5 (15)
21 1-4342 BEARING, Nyliner (4)
22 1-4100 BUSHING, Wheel Adjustment
23 1-4103 SCREW, 5/16-18 x 1/4” Set
24 1-4101 NUT, 1/2” Push (2)
25 9-0250 WASHER, 1/2” SAE Flat (2)
26 9-0761 NUT, 1/4-20 Hex Top Lock (8)
27 9-0831 SCREW, 5/16-18 x 2-1/2” Hex Head Cap, Grade 5 (2)
28 1-4114 SPRING, Compression (2)
29 9-0078 BOLT, 1/4-20 x 1-1/4” Square Neck Carriage, Grade 5 (2)
30 9-0598 WASHER, 1/4” SAE Flat (2)
31 1-4779 PIN, 5/16” Lift
32 1-4784 GRIP, Handle
33 1-3113 COTTER, Hairpin
34 1-4062 DECAL, Thatcherizer
35 1-4785 DECAL, Adjustment
LT SERIES (Small Frame) MANUAL No. 06613
9
ACCESSORY, ANTI-SCALP 6-0737
ITEM PART NO. DESCRIPTION
-- 6-0737 KIT, Anti-Scalp Wheel (33” Decks) (Includes items 1 thru 6)
1 3-2478 BRACKET, Wheel (2)
2 1-9190 WHEEL (2)
3 1-5272 SPACER (2)
4 9-0859 SCREW, 3/8-24 x 3-3/4” Hex Head Cap, Grade 5 (2)
5 9-0289 NUT, 3/8-24 Hex Center Lock (6)
6 9-0292 SCREW, 3/8-24 x 3/4” Hex Head Cap, Grade 2 (4)
5
1
6
5
2
3
4
ACCESSORY, ANTI-SCALP 6-0794
ITEM PART NO. DESCRIPTION
-- 6-0794 KIT, Anti-Scalp Wheel (41” Decks) (Includes items 1 thru 7)
1 4-7913 BRACKET, R.H.
2 4-7914 BRACKET, L.H.
3 1-9190 WHEEL (2)
4 1-5272 SPACER
5 9-0859 SCREW, 3/8-24 x 3-3/4” Hex Head Cap, Grade 5 (2)
6 9-0289 NUT, 3/8-24 Hex Lock Center Lock (6)
7 9-0292 SCREW, 3/8-24 x 3/4” Hex Head Cap, Grade 2 (4)
6
6
MANUAL No. 06613 LT SERIES (Small Frame)
1
7
4
3
5
7
6
2
6
4
5
3
10
6-1400 ACCESSORY, ANTI-SCALP
6-3128 ACCESSORY, ANTI-SCALP
LT SERIES (Small Frame) MANUAL No. 06613
11
ACCESSORY, 33” SINGLE BAG GRASS CATCHER 6-0943
MANUAL No. 06613 LT SERIES (Small Frame)
12
6-0943 ACCESSORY, 33” SINGLE BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
1 5-1948 TOP, Container
2 1-6108 SKIRT, Dust
3 2-9840 WASHER, Faceted (5)
4 4-7973 FRAME, Grass Bag
5 2-9841 CLEVIS PIN, 5/16 x 1-11/16 (2)
6 3-1725 LATCH, Grass Catcher
7 9-0532 SCREW, 10-32 x 1-11/16 Hex Cap
8 9-0376 NUT, 10-32 Hex Lock w/Nylon Insert
9 3-7758 ROD, Bag
10 9-1503 PIN, 3/32 x 1-1/2 Hair (2)
11 1-2556 CONNECTOR, 1/2 x 3” Rod
12 1-9251 BAG, Single Zipperless
13 1-9912 ADAPTER, Bag
14 3-1951 LATCH, Tube
15 1-4517 TUBE, Grass
16 9-1576 NUT, 1/4-20 Hex (3)
17 9-1314 WASHER, 1/4 Lock (3)
18 3-7745 HANDLE, Tube
19 3-1952 BASE, Handle
20 9-1530 BOLT, 1/4-20 X 3/4" (3)
21 9-1537 WING-NUT, 5/16-18 Lock
22 9-1303 BOLT, 5/16-18 X 1" Carriage
-- 7-1677 SHIELD, Muffler (Shown on Page 1)
-- 4-2716 BRACKET, Bumper Reinforcement (Shown on Page 1)
LT SERIES (Small Frame) MANUAL No. 06613
13
ACCESSORY, 38” SINGLE BAG GRASS CATCHER 6-1312
(for Hydro Drive Models)
3
32
30
29
2
20
31
28 KIT
18
7A
14
7
21
18
16
15
14
MANUAL No. 06613 LT SERIES (Small Frame)
5
9
13
4
8
17
10
6
11
14
6-1312 ACCESSORY, 38” SINGLE BAG GRASS CATCHER
(for Hydro Drive Models)
ITEM PART NO. DESCRIPTION
1 6-1312 KIT, Single Bag Grass Catcher (Incl. Items 2 thru 28)
2 5-1948 TOP, Container (Includes Decal No. 1-1910)
3 2-9840 WASHER, Faceted (5)
4 4-7973 FRAME, Structure
5 3-7758 ROD, Bag
6 1-2556 CONNECTOR, Bag Rod
7 1-9251 BAG, Grass
7A 1-6108 SKIRT, Dust
8 3-1725 LATCH, Top
9 9-0532 SCREW, #10-32 Hex Head Cap, Grade 2
10 2-9841 PIN, 5/16 x 1-11/16” Clevis
11 2-6814 ADAPTER, 38” Deck
12 3-3995 BAFFLE
13 9-0376 NUT, #10-32 Hex Nyloc
14 9-1530 BOLT, 1/4-20 x 3/4” Short Neck Carriage, Grade 5 (3)
15 3-1951 LATCH, Tube
16 3-1952 BASE, Handle
17 9-1503 PIN, 3/32 x 1-1/2” Hair
18 9-1576 NUT, 1/4-20 Hex, Grade 5 or B (3)
18A 9-1314 WASHER, 1/4” Internal Tooth Lock (3)
19 9-0824 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, Grade 5
(Blade Retaining Screw- not shown)
20 2-7915 TUBE, Grass
21 3-7745 HANDLE, Tube
22 6-0480 KIT, Air Lift (Includes items 22 thru 26)
23 9-0223 NUT, 5/16-24 Hex (6)
24 9-0391 WASHER, 5/16 Internal Tooth Lock (6)
25 3-7723 AIR-LIFT (2)
26 9-0228 SCREW, 5/16-24 x 11/16” Oval Head Machine, Grade 5
27 9-1575 NUT, 5/16-18 Hex Center Lock (4)
28 6-3289 KIT, Catcher, Debris Shield (Incl. items 29-32)
29 6-3287 SHIELD, Debris
30 9-0909 BOLT, 1/4-20 x 1-1/2” Hex (2)
31 9-1294 WASHER, 1/4” Flat (2)
32 9-1705 NUT, 1/4-20 Hex top Lock (2)
NOTE: 6-1068 Catcher Adapter Kit must be installed before Grass catcher can be mounted.
LT SERIES (Small Frame) MANUAL No. 06613
15
ACCESSORY, 38” SINGLE BAG GRASS CATCHER 6-1886
(Model Year 97; Replaced 6-1249)
MANUAL No. 06613 LT SERIES (Small Frame)
1
3
35
34
37
36
6
2
7
32
12
10
9
8
46
22
13
11
15
17
49
45 KIT
20
21
16
48
18
47
14
19
18
17
16
19
15
4
43
33
38
5
40
41
42
39
16
6-1886 ACCESSORY, 38” SINGLE BAG GRASS CATCHER
(Model Year 97; Replaced 6-1249)
ITEM PART NO. DESCRIPTION
-- 6-1886 KIT, Single Bag Grass Catcher (Incl. Items 1 thru 45)
1 5-1948 TOP, Container (Includes #1-1910 Decal)
2 1-6108 SKIRT, Dust
3 4-7973 FRAME
4 3-7758 ROD, Bag
5 1-9251 BAG, Grass Catcher
-- 4-4726* BAFFLE
6 5-4395 ASSEMBLY, Tube/Strap (Includes Indented Items)
7 3-9478 TUBE, Grass
8 3-6404 NUT, #10-24 Weld (3)
9 3-6415 SCREW, #10-24 x 5/8” Pan Head (3)
10 9-1552 WASHER, 7/32” Flat (2)
11 3-6433 ASSEMBLY, Strap Mounting (3)
12 3-6422 WASHER, 3/16” Flat (3)
13 5-4388 ASSEMBLY, Adapter/Strap (Includes Indented Items)
14 5-9469 ADAPTER
15 3-6404 NUT, #10-24 Weld (2)
16 3-6433 ASSEMBLY, Strap Mounting (2)
17 3-6422 WASHER, 3/16” Flat (2)
18 9-1552 WASHER, 7/32” Flat (2)
19 3-6415 SCREW, #10-24 x 5/8” Pan Head (2)
20 3-6543 NUT, 5/16-18 “T”
21 9-1296 WASHER, 11/32” Flat
22 9-1833 SCREW, 5/16-18 x 5/8” Pan Head
23 5-4514* ASSEMBLY, Blade (Includes #4-4686 Decal)
24 6-1887 HARDWARE BAG (Includes Indented Items)
25 9-0492* NUT, 5/16-18 Wing (2)
26 9-1303* BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5 (2)
27 9-1575* NUT, 5/16-18 Hex Center Lock, Grade B or 5 (2)
28 9-1318* SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 5 (2)
29 3-6543* NUT, 5/16-18 “T” (2)
30 9-1296* WASHER, 11/32” Flat (7)
31 9-1833* SCREW, 5/16-18 x 5/8” Pan Head (2)
32 2-9840 WASHER, Faceted (5)
33 2-9841 PIN, 5/16 x 1-11/16” Clevis (2)
34 3-1725 LATCH, Grass Catcher
35 9-0532 SCREW, #10-32 x 1-1/16” Hex Head Cap, Grade 2
36 9-0376 NUT, #10-32 Hex Top Lock
37 9-1503 PIN, 3/32 x 1-1/2 Hair (2)
38 1-2556 CONNECTOR, Bag Rod
39 6-0480 KIT, Air Lift (Includes Indented Items)
40 3-7723 LIFTS, Air (2)
41 9-0228 SCREW, 5/16-24 x 21/32” Machine (6)
42 9-0391 WASHER, 5/16” Internal Tooth Lock (6)
43 9-0223 NUT, 5/16-24 Hex (6)
44 9-1296* WASHER, 11/32” Flat, Grade 5 (2)
45 6-3289 KIT, Catcher Debris Shield (Incl. items 46-49)
46 6-3287 SHIELD, Debris
47 9-0909 BOLT, 1/4-20 x 1-1/2” Hex (2)
48 9-1294 WASHER, 1/4” Flat (2)
49 9-1705 NUT, 1/4-20 Hex Top Lock (2)
LT SERIES (Small Frame) MANUAL No. 06613
*NOTE: For location, see Instruction Sheet #4-2686, included in 6-1886 Kit.
NOTE: 6-1334 Catcher Adapter Kit must be installed before Grass catcher can be mounted.
17
ACCESSORY, 42” SINGLE BAG GRASS CATCHER 6-0944
MANUAL No. 06613 LT SERIES (Small Frame)
18
6-0944 ACCESSORY, 42” SINGLE BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
- 6-0944 KIT, Grass Catcher Single Bag (Includes 1 Thru 33)
1 5-1948 TOP, Container (Includes Decal #1-1910)
2 1-9251 BAG, Grass (Includes Item 3)
3 1-6108 SKIRT, Dust
4 4-7973 FRAME, Structure
5 3-7758 ROD, Bag (Includes Item 6)
6 1-2556 CONNECTOR, Bag Rod
7 3-1725 LATCH
8 9-0532 SCREW, #10-32 x 1-3/8” Hex Cap
9 9-0376 NUT, #10-32 Hex Lock
10 2-9840 WASHER, Faceted (5)
11 1-7316 TUBE, Grass
12 5-1663 ADAPTER, Deck (Includes Decal 4-6720)
13 3-7745 HANDLE, Tube
14 3-1952 BASE, Handle
15 3-1951 LATCH, Tube
16 7-1677 SHIELD, Muffler (See Figure 2)
17 9-0803 BOLT, 1/4-20 x 3/4” Carriage (3)
18 9-1503 PIN, 3/32 x 1-1/2” Hair (2)
19 9-1584 NUT, 1/4-20 Hex Lock (6)
20 6-0735 KIT, Air Lift (Includes Items 22 Thru 25) (See Figure 1)
21 2-9841 PIN, 5/16 x 1-11/16” Clevis (2)
22 9-0228 SCREW, 5/16-24 x 21/32” Cross Recess (6) (See Figure 1)
23 9-0391 WASHER, 5/16 Internal Tooth Lock (6) (See Figure 1)
24 9-0223 NUT, 5/16-24 Hex (6) (See Figure 1)
25 3-1724 LIFT, Air (2) (See Figure 1)
26 3-8277 BAFFLE (See Figure 3)
27 9-1613 SCREW, 5/16-18 x 3/4” Round Head (3) (See Figure 3)
28 9-1601 NUT, 5/16-18 Hex Lock (3) (See Figure 3)
29 9-1589 SCREW, 3/8-24 x 1-1/4” Hex Cap (Not Shown - Replacement Blade Bolt)
30 1-9795 BLADE, 21” Cutting (See Figure 1)
31 2-3797 PAD, Bumper Mount (2)
32 9-0577 BOLT, 5/16-18 x 1-1/2” Carriage (2)
33 9-1575 NUT, 5/16-18 Hex Center Lock (2)
LT SERIES (Small Frame) MANUAL No. 06613
19
ACCESSORY, 33” TWIN BAG GRASS CATCHER 6-3281
MANUAL No. 06613 LT SERIES (Small Frame)
20
6-3281 ACCESSORY, 33” TWIN BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
1 5-9626 COVER ASS’Y
2 1-9295 DECAL, Snapper (11-1/2” Long)
3 9-1545 NUT, 1/4-20 Flange Lock (5)
4 5-9951 FRAME STRUCTURE (includes indented items)
- 2-3797 PAD, Bumper Mount (2)
- 9-0188 WASHER, 5/16” Flat (2)
- 9-0184 LOCKNUT, 5/16-18 (2)
- 9-0577 BOLT, 5/16-18 x 1-1/2" Carriage (2)
5 9-1611 SCREW, 1/4-28 X 3/4" Hex Cap (4)
6 3-8087 HINGE, Top (2)
7 9-0238 SCREW, 5/16-24 x 1" Hex Cap (2)
8 9-1296 WASHER, 5/16 Flat (6)
9 9-1605 NUT, 1/4-28 Hex (4)
10 9-1314 WASHER, 1/4" Lock (8)
11 9-1315 WASHER, 5/16" Split Lock (2)
12 9-1606 NUT, 5/16-24 Hex Lock (2)
13 9-1503 COTTER, Hairpin (3)
14 3-6073 BRACE, Short (includes indented item)
- 5-1407 SPRING & HOOK ASS’Y
- 4-6573 BRACE, Long (includes indented item)
- 5-1407 SPRING & HOOK ASS’Y
15 2-9841 PIN, Clevis (3)
16 1-9966 INLET
17 1-9725 SECTOR
18 9-1530 BOLT, 1/4-20 x 3/4" Carriage (4)
19 5-7652 SCREEN ASS'Y (includes indented items)
- 1-9732 FRAME
- 1-9731 SCREEN
20 5-1930 BAG ASS'Y (includes indented items) (2)
- 1-9250 BAG, Grass Catcher (2)
- 1-9965 ROD, Bag Support (2)
- 1-4456 CONNECTOR, Rod (2)
21 9-1604 BOLT, 1/4-20 x 1/2 Grade 5 (5)
22 9-1576 NUT, 1/4-20 Hex (8)
23 9-1294 WASHER, 9/32" Flat (4)
24 9-1314 WASHER, 1/4 Lock (4)
25 3-7745 HANDLE, Tube
26 3-1952 BASE, Tube Handle
27 9-1614 BOLT, 1/4-20 X 3/4" Carriage (4)
28 3-1951 LATCH, Chute Tube
29 1-9912 ADAPTER
30 1-1910 DECAL, Caution
31 1-4517 TUBE, Grass
32 9-1537 WING-NUT, 5/16-18
33 9-1303 BOLT, 5/16-18 X 1"
34 9-1575 NUT, 5/16-18 Hex Lock (2) (not used, extra)
35 9-1612 BOLT, 5/16-18 X 1-1/2" Carriage (2) (not used, extra)
-- 3-1954 BRACKET, Bumper Reinforcement (Shown on page 1)
-- 7-1677 SHIELD, Muffler (Shown on page 1)
-- 7-2416 WEIGHT, Front Frame (6) (Rider only) (Shown on page 2)
-- 9-1976 SCREW, 5/8-11 x 1-3/4 Hex Cap (2) (Rider only) (Shown on page 2)
-- 9-0333 WASHER, 5/8 Split Lock (2) (Rider only) (Shown on page 2)
-- 9-0537 NUT, 5/8-11 Hex (2) (Rider only) (Shown on page 2)
-- 9-1553 SCREW, 3/8-16 x 1-3/4” Hex Cap (2) (Rider only) (Shown on page 3)
-- 9-1320 WASHER, 3/8 Split Lock (2) (Rider only) (Shown on page 3)
-- 9-1302 NUT, 3/8-16 Hex (2) (Rider only) (Shown on page 3)
LT SERIES (Small Frame) MANUAL No. 06613
21
ACCESSORY, 38” TWIN BAG GRASS CATCHER 6-1248/6-1888
MANUAL No. 06613 LT SERIES (Small Frame)
22
6-1248/6-1888 ACCESSORY, 38” TWIN BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
- 6-1888 KIT, Twin Bag Grass Catcher (Was #6-1248) (Includes Items 1 Thru 59)
1 5-9626 COVER Assembly
2 3-5706 INLET
3 1-9725 SECTOR (Inside top baffle)
4 5-9951 MOUNTING Assembly (Includes following indented item)
- 3-6263 HOLDER, Inlet
5 5-1407 SPRING & Hook Assembly
6 3-6073 BRACE
7 5-4514 ASSEMBLY, Blade (Includes #4-4686 Decal)
8 3-8087 HINGE, Top (2)
9 4-4726* BAFFLE
10 4-4685 SEAL
11 2-3797 PAD, Bumper (2)
12 5-4342 ASSEMBLY, Tube/Strap (Includes Indented Items & Item 31)
13 3-5707 TUBE, Grass
14 3-6404 NUT, #10-24 Weld
15 3-6415 SCREW, #10-24 x 5/8” Pan Head
16 3-6422 WASHER, 3/16 Flat
17 3-6433 ASSEMBLY, Strap Mounting
18 9-1552 WASHER, 7/32 Flat
19 5-4388 ASSEMBLY, Adapter/Strap (Includes Indented Items)
20 5-9469 ADAPTER
21 3-6404 NUT, #10-24 Weld (2)
22 3-6415 SCREW, #10-24 x 5/8” Pan Head (2)
23 3-6422 WASHER, 3/16 Flat (2)
24 3-6433 ASSEMBLY, Strap Mounting (2)
25 3-6543 NUT, 5/16-18 “T”
26 9-1296 WASHER, 11/32 Flat
27 9-1552 WASHER, 7/32 Flat (2)
28 9-1833 SCREW, 5/16-18 x 5/8” Pan Head
29 5-1930 ASSEMBLY, Bag (Includes Indented Items)
-- 1-9250 BAG, Grass Catcher (2)
-- 1-9965 ROD, Bag Support
-- 1-4456 CONNECTOR
30 5-7652 ASSEMBLY, Screen (Includes Indented Items)
-- 1-9731 SCREEN
-- 1-9732 FRAME, Screen
31 1-1910 DECAL, Caution
32 1-9295 DECAL, SNAPPER
-- 6-1889 HARDWARE BAG (Includes Indented Items & #6-0480 Air Lift Kit)
33 2-9841 PIN, 5/16 x 11/16” Clevis (3)
34 3-6543* NUT, 5/16-18 “T”
35 9-0492* NUT, 5/16-18 Wing (2)
36 9-1294 WASHER, 1/4 Flat (Grade 5) (4)
37 9-1296* WASHER, .11/32 Flat (Grade 5) (4)
38 9-1303* BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5 (2)
39 9-1314 WASHER, 1/4 Internal Tooth Lock (4)
40 9-1503 PIN, 3/32 x 1-1/2” Hair (3)
41 9-1530 BOLT, 1/4-20 x 3/4” Short Neck Carriage, Grade 5 (4)
42 9-1545 NUT, 1/4-20 Flange Lock (5)
43 9-1576 NUT, 1/4-20 Hex, Grade 5 or B (4)
44 9-1575* NUT, 5/16-18 Hex Center Lock, Grade 5 or B (2)
45 9-1604 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (5)
46 9-1833* SCREW, 5/16-18 x 5/8” Pan Head Machine
47 9-1318* BOLT, 5/16-18 x 3/4” Hex Cap, Grade 5 (2)
48 9-1296* WASHER, 11/32” Flat (Grade 5) (2)
49 9-0238 SCREW, 5/16-24 x 1” Hex Head Cap, Grade 5 (2)
50 9-1315 WASHER, 5/16 “Split Lock (2)
51 9-1575 NUT, 5/16-18 Hex Center Lock (2)
52 9-1605 NUT, 1/4-28 Hex, Grade 5 or B (4)
53 9-1606 NUT, 5/16-24 Hex Center Lock (2)
54 9-1611 SCREW, 1/4-28 x 3/4” Hex Head Cap (4)
55 9-1612 BOLT, 5/16-18 x 1-1/2” Carriage, Grade 5 (2)
-- 6-0480 KIT, Air Lift (2) (Includes Indented Items)
56 3-7723* LIFTS, Air (2)
57 9-0228* SCREW, 5/16-24 x 21/32” Machine (6)
58 9-0391* WASHER, 5/16” Internal Tooth Lock (6)
59 9-0223* NUT, 5/16-24 Hex (6)
*NOTE: For location, see Instruction #4-2685, included in 6-1888 Kit.
NOTE: 6-1334 Catcher Adapter Kit must be installed before Grass Catcher can be mounted.
LT SERIES (Small Frame) MANUAL No. 06613
23
ACCESSORY, 41” TWIN BAG GRASS CATCHER 6-0945
MANUAL No. 06613 LT SERIES (Small Frame)
24
6-0945 ACCESSORY, 41” TWIN BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
-- 6-0945 KIT, 41” Twin Bag Grass Catcher (includes items 1 thru 32)
1 5-9710 ASSEMBLY, Cover (Includes 3-6075, Reinforcement Bar)
2 1-9725 SECTOR (Inside Top Baffle)
3 5-9937 STRUCTURE, Frame (includes indented items)
- 2-3797 PAD, Bumper Mount (2)
- 9-0192 BOLT, 5/16-18 x 1-1/2” Square Neck Carriage (2)
- 9-0188 WASHER, 5/16” Flat (2)
- 9-0184 NUT, 5/16-18 Hex Center Lock (2)
4 5-7652 ASSEMBLY, Screen (includes indented items)
- 1-9732 FRAME
- 1-9731 SCREEN
5 5-1407 ASSEMBLY, Spring & Hook
6 3-6073 BRACE
7 1-7318 TUBE, 46” Grass
8 5-1663 ASSEMBLY, Chute
9 5-1930 ASSEMBLY, Bag (2) (includes indented items)
- 1-9250 BAG, Grass Catcher (2)
- 1-9965 ROD, Bag Support (2)
- 1-4456 CONNECTOR, Rod (2)
10 3-6076 SHIELD, Muffler Heat
- 7-1677 GUARD, Muffler Heat
11 3-8087 HINGE, Top (2)
12 9-0541 SCREW, 1/4-28 x 3/4” Hex Head Cap, Grade 5 (4)
13 9-0222 NUT, 5/16-24 Hex Center Lock (2)
14 9-0187 WASHER, 5/16” Split Lock (2)
15 9-0188 WASHER, 5/16” SAE Flat (4)
16 9-0095 NUT, 1/4-28 Hex (4)
17 9-0053 WASHER, 1/4” Internal Tooth Lock (4)
18 9-0238 SCREW, 5/16-24 x 1” Hex Head Cap, Grade 5 (2)
19 1-8593 DECAL, Snapper (11-1/2” Long)
20 1-1910 DECAL, Caution
21 3-1954 SUPPORT, Bumper
- 9-0853 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (4)
22 3-8277 BAFFLE
22A 6-0773 HARDWARE BAG (includes indented items)
23 3-7745 HANDLE, Tube
24 3-1952 BASE, Tube Handle
25 3-1951 LATCH, Chute Tube
26 9-0803 BOLT, 1/4-20 x 3/4” Flat Head Carriage (3)
27 9-1503 COTTER, 3/32 x 1-1/2” Hairpin (3)
28 9-1584 NUT, 1/4-20 Hex Flange Lock (7)
29 2-9841 PIN, 5/16 x 1-11/13” Clevis (3)
30 9-1604 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5
- 9-1303 BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5
- 9-1537 LOCKNUT, 5/16-18 Wing
- 9-1613 SCREW, 5/16-18 x 3/4” Round Head (3)
- 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (3)
- 9-1589 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, Grade 5
- 9-1575 NUT, 5/16-18 Hex Center Lock, Grade 5 or B (4)
31 1-9795 BLADE, 21” Air Lift
32 6-0735 KIT, Air Lift (includes indented items)
33 3-1724 EXTENSION, Air Lift (2)
34 9-0223 NUT, 5/16-24 Hex (4)
35 9-0228 SCREW, 5/16-24 Oval Head Machine (4)
36 9-0391 WASHER, 5/16” Internal Tooth Lock (4)
NOTE: 6-0587, Catcher Adapter kit must be installed before Grass catcher can be mounted.
LT SERIES (Small Frame) MANUAL No. 06613
25
ACCESSORY, 33” CLAMSHELL GRASS CATCHER 6-3131
5
12
5
11
3
37
50
5 58
56 40
31
37
30
12
18
12
41
17
14
10
43
4
7
9
47
23
1
28
25
53
52
55
22
54
26
MANUAL No. 06613 LT SERIES (Small Frame)
27
15
30
21
13
32
44
40
49
39
36
45
46
35
31
19
34
6
57
59
38
51
33
24
48
42
29
30
26
6-3131 ACCESSORY, 33” CLAMSHELL GRASS CATCHER
ITEM PART NO. DESCRIPTION
-- 6-3131 KIT, 33” Clamshell Grass
Catcher (
1 1-7316 TUBE, Grass
2 2-8700 DECAL, Read Manual
(Not Shown)
3 1-1870 GRIP
4 1-6314 WASHER, 11/32 Flat (9)
5 3-6422 WASHER, 3/16 Flat (30)
6 5-8615 WELDMENT, Front Cover
Brace
7 7-2873 COVER, Front
8 7-2874 DEFLECTOR (Not Shown)
9 7-2950 GASKET, Chute
10 9-0307 SCREW, #10-24 x 1/2” Self Tapping (3)
11 9-0999 SCREW, 1/4-20 x 5/8” Pan
Head Self-Tapping (9)
12 9-1079 NUT, #10-24 Hex Fl. Lock (22)
13 7-2951 END CAP, Tube
14 5-8600 WELDMENT,
15 7-2872 COVER, Rear
16 7-2876 GRILL, Rear
17 7-3145 BOLT, #10-24 x 1-1/2” Oval
Head (13)
18 7-3179 HINGE, Rear Cover
19 9-1265 SCREW, #10-24 x 1-1/2
Machine (5)
20 7-2964 DECAL, Warning (Not Shown)
21 3-1951 LATCH, Chute/Tube
22 3-1952 BASE, Handle
23 3-7745 HANDLE, Tube
24 9-1303 BOLT, 5/16-18 x 1”
Short Neck Carriage, Grade 5
25 9-1314 WASHER, 1/4 Internal Tooth
Lock (3)
26 9-1530 BOLT, 1/4-20 x 3/4” Round
Hd. Short Nk. Carriage, Gr. 5
27 9-1537 NUT, 5/16-18 Wing
28 9-1576 NUT, 1/4-20 Hex (3)
29 9-1593 PIN, 3/8 Self Lock Cotter (2)
30 9-1514 WASHER, 3/8 Flat (8)
*NOTE: 5-8641 includes a bag adapter (part no. 1-9912) and two decals (part nos. 4-6720 & 2-9784).
Includes items 1 thru 60)
Rear Cover Brace
Cover (Not Shown)
Round Head
(3)
LT SERIES (Small Frame) MANUAL No. 06613
ITEM PART NO. DESCRIPTION
31 9-1601 NUT, 5/16-18 Flange Lock (8)
32 9-1811 BOLT, 5/16-18 x 5/8” Hex
Flange Lock (3)
33 3-1954 SUPPORT, Bumper
34 3-3587 BUMPER, Rear
35 7-3272 SPACER, Bumper Bracket
36 9-0509 WASHER, 1/2 Internal Tooth
Lock
37 9-1270 SCREW, 5/16-18 x 1-3/4” Hex
Washer Self-Tapping (5)
38 9-0646 BOLT, 1/2-13 x 1” Hex Head
Cap Grade 5
39 9-1316 NUT, 1/2-13 Hex Gr. B
40 9-1299 NUT, 3/8-16 Hex Lock (4)
41 9-1304 SCREW, 3/8-16 x 1” Hex Head
Cap, Grade 5 (2)
42 4-4773 WELDMENT, LT Bumper
43 9-0624 BOLT, #10-24 x 3/4” Hex
Flange Lock, Grade 5
44 5-8641* ASSEMBLY, Chute
45 9-1296 WASHER, 5/16” Flat (2)
46 9-1298 NUT, 5/16-18 Hex Nyloc (2)
47 7-3172 LINK, Handle (Right Hand)
48 7-3173 LINK, Handle (Left Hand)
49 7-3171 PLATE, Hitch
50 9-1300 WASHER, 7/16” Flat (4)
51 9-1891 BOLT, 3/8-16 x 1” Hex Flange
Lock (2)
-- 6-0480 KIT, Air Lift (Incl. Items 52-55)
52 3-7723 Air Lift (2)
53 9-0223 NUT, 5/16-24 Hex (6)
54 9-0228 SCREW, 5/16-24 x 5/8” Oval
Head Machine (6)
55 9-0391 WASHER, 5/16 Internal
Tooth Lock (6)
56 9-1905 BOLT, 5/16-18 x 7/8” Hex
Flange Lock (2)
57 7-3262 BRACKET, Bumper Support
(Right Hand)
58 7-3263 BRACKET, Bumper Support
(Left Hand)
59 5-8745 BRACE, Bumper
60 7-3509 SCREEN, Clamshell (not
shown)
27
ACCESSORY, 38” CLAMSHELL GRASS CATCHER 6-3126
33
5
5
11
6 3
38 53
54 36
39
28
25
26
35 60
5
46 45 56
65
25
42
5
46 45 45 50 58 57
31
30
12
18
12
15
41
37
17
14
10
4
43
12
30
40
7
9
13
31
47
49
23
66
32
1
27
22
26
61
63
MANUAL No. 06613 LT SERIES (Small Frame)
34
19
37
52
55
51
48
29
30
28
59
21
67
62
44
28
6-3126 ACCESSORY, 38” CLAMSHELL GRASS CATCHER
ITEM PART NO. DESCRIPTION
-- 6-3126 KIT, 38” Clamshell Grass
Catcher (
Includes items 1 thru 68)
1 7-3431 TUBE, Grass
2 2-8700 DECAL, Read Manual
(Not Shown)
3 1-1870 GRIP
4 1-6314 WASHER, 11/32 Flat (9)
5 3-6422 WASHER, 3/16 Flat (32)
6 5-8615 WELDMENT, Front Cover
Brace
7 7-2873 COVER, Front
8 7-2874 DEFLECTOR (Not Shown)
9 7-2950 GASKET, Chute
10 9-0307 SCREW, #10-24 x 1/2” Self Tapping (3)
11 9-0999 SCREW, 1/4-20 x 5/8” Pan
Head Self-Tapping (9)
12 9-1079 NUT, #10-24 Hex Fl. Lock (22)
13 7-2951 END CAP, Tube
14 5-8600 WELDMENT, Rear Cover Brace
15 7-2872 COVER, Rear
16 7-2876 GRILL, Rear Cover (Not Shown)
17 7-3145 BOLT, #10-24 x 1-1/2” Oval
Head (13)
18 7-3179 HINGE, Rear Cover
19 9-1265 SCREW, #10-24 x 1-1/2
Machine (5)
20 7-2964 DECAL, Warning (Not Shown)
21 3-1951 LATCH, Chute/Tube
22 3-1952 BASE, Handle
23 3-7745 HANDLE, Tube
24 9-1540 SCREW, 5/16-18 x 1-1/2” Hex
Head Cap, Grade 5
(used on Hydro RER only!)
25 9-1314 WASHER, 1/4 Internal Tooth
Lock (3)
26 9-1530 BOLT, 1/4-20 x 3/4” Round
Hd. Short Nk. Carriage, Gr. 5 (3)
27 9-1575 NUT, 5/16-18 Hex Ctr. Lock (2)
28 9-1576 NUT, 1/4-20 Hex (3)
29 9-1593 PIN, 3/8 Self Lock Cotter (2)
30 9-1514 WASHER, 3/8 Flat (8)
31 9-1601 NUT, 5/16-18 Flange Lock (8)
32 9-1811 BOLT, 5/16-18 x 5/8” Hex
Flange Lock (3)
33 3-1954 SUPPORT, Bumper
34 3-3587 BUMPER, Rear
35 7-3272 SPACER, Bumper Bracket
*NOTE: 5-8658 includes a bag adapter (part no. 2-9206) and two decals (part nos. 4-6720 & 2-9784).
LT SERIES (Small Frame) MANUAL No. 06613
ITEM PART NO. DESCRIPTION
36 9-0509 WASHER, 1/2 Internal Tooth
Lock
37 9-1270 SCREW, 5/16-18 x 1-3/4” Hex
Washer Self-Tapping (5)
38 9-0646 BOLT, 1/2-13 x 1” Hex Head
Cap Grade 5
39 9-1316 NUT, 1/2-13 Hex Grade B
40 9-1299 NUT, 3/8-16 Hex Lock (4)
41 9-1304 SCREW, 3/8-16 x 1” Hex Head
Cap, Grade 5 (2)
42 4-4773 WELDMENT, LT Bumper
43 9-0624 BOLT, #10-24 x 3/4” Hex
Flange Lock, Grade 5
44 5-8658* ASSEMBLY, Chute
45 9-1296 WASHER, 5/16” Flat (5)
46 9-1298 NUT, 5/16-18 Hex Nyloc (2)
47 7-3172 LINK, Handle (Right Hand)
48 7-3173 LINK, Handle (Left Hand)
49 7-3171 PLATE, Hitch
50 9-1300 WASHER, 7/16” Flat (4)
51 9-1891 BOLT, 3/8-16 x 1” Hex Flange
Lock (2)
-- 6-0480 KIT, Air Lift (Incl. Items 52-55)
52 3-7723 Air Lift (2)
53 9-0223 NUT, 5/16-24 Hex (6)
54 9-0228 SCREW, 5/16-24 x 5/8” Oval
Head Machine (6)
55 9-0391 WASHER, 5/16 Internal
Tooth Lock (6)
56 9-1905 BOLT, 5/16-18 x 7/8” Hex
Flange Lock (2)
57 7-3262 BRACKET, Bumper Support
(Right Hand)
58 7-3263 BRACKET, Bumper Support
(Left Hand)
59 4-4726 BAFFLE, 38 Deck MY 97
60 5-4514 ASS’Y, Air Lift Blade
-- 3-6547 BLADE, 19.64” Hi-Lift
-- 4-4686 DECAL, Warning
61 3-6404 NUT, Weld- 10/24 Thread (2)
62 3-6415 SCREW, 10/24 x 5/8” Pan
Head (2)
63 3-6433 STRAP, Bag Adap./Tube (2)
64 3-6543 TEENUT, 5/16-18 Thread
65 5-8745 BRACE, Bumper
66 9-1318 SCREW, 5/16-18 x 3/4” Hex
Head Cap, Grade 5 (3)
67 9-1552 WASHER, .219 I.D. Flat (2)
68 7-3509 SCREEN, Clamshell (not shown)
29
ACCESSORY, GRASS CATCHER ADAPTER 6-1334
(for 1-Piece Frame, Series A thru D Models)
ITEM PART NO. DESCRIPTION
-- 6-1334 KIT, Grass Catcher Adapter (Includes items 1 thru 6)
1 3-4173 SUPPORT, Stand-Up Tube L.H. (shown installed)
2 3-4172 SUPPORT, Stand-Up Tube R.H. (shown installed)
3 1-7593 BUMPER
4 3-4020 BRACKET
5 3-3991 BRACKET, Stand-Off
6 6-1258 BAG, Hardware (Includes indented items below)
7 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)
8 9-1592 BOLT, 5/16-18 x 2” Hex Flange Lock, Grade 5 (4)
9 2-7172 SCREW, 1/4-20 x 5/8” Hex Head Cap, Grade 5 (2)
10 9-1584 NUT, 1/4-20 Hex Flange Lock, Grade 5 (2)
MANUAL No. 06613 LT SERIES (Small Frame)
30
6-1068 ACCESSORY, GRASS CATCHER ADAPTER
(for Hydro and Gear Drive Models)
NOTE:
(included in Kit #6-1068) consists of items:
#1 (quantity. 2), #2 (qty. 4), #7 (qty. 4) and
#8 (qty. 4).This kit is required on Hydro Drive
Tractors with wide tires (20-10.00 x 8).
ITEM PART NO. DESCRIPTION
-- 6-1068 KIT, Grass Catcher Adapter (Includes items 1 thru 7)
1 3-4062 BRACKET, Bagger Adapter (2)
2 9-1591 BOLT, 5/16-18 x 1” Hex Flange Lock, Grade 5 (4)
3 1-7593 BUMPER
4 3-4020* BRACKET, Support
5 3-3140* BRACKET, Stand-off
6 6-1070 BAG, Hardware (includes indented items below)
7 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)
8 9-1602 BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, Grade 5 (2 in bag; 4 in kit)
9 2-7172 SCREW, 1/4-20 x 5/8” Hex Head Cap, Grade 5 (2)
10 9-1584 NUT, 1/4-20 Hex Flange Lock, Grade 5 (2)
11 1-6116 NUT, 5/16” Push-on (4)
12 9-1264 BOLT, 5/16-18 x 1-3/4” Hex Flange Lock, Grade 5 (2)
*NOTE: Required for Twin Bag Models only.
LT SERIES (Small Frame) MANUAL No. 06613
LT Hydro Bagger Adapter Kit #6-1311,
31
ACCESSORY, GRASS CATCHER ADAPTER 6-0860
(for LT12D Series Models)
ITEM PART NO. DESCRIPTION
-- 6-0860 KIT, Bagger Adapter (Includes items 1 thru 7)
1 3-6258 BUMPER (2)
2 3-4020 BRACKET
3 3-8394 BRACE
-- 6-0997 BAG, Hardware (Includes indented items below)
4 9-1592 BOLT, 5/16-18 x 2” Hex Flange Lock, Grade 5 (4)
5 1-6116 NUT, 5/16” Push-on (4)
6 9-0639 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, Grade 5 (2)
7 9-1584 NUT, 1/4-20 Hex Flange Lock, Grade 5 (2)
MANUAL No. 06613 LT SERIES (Small Frame)
32
6-1308 ACCESSORY, BAG-N-WAGON ADAPTER
(for Series “A” 1-Piece Frame Models)
ITEM PART NO. DESCRIPTION
-- 6-1308 KIT, Bag-N-Wagon Adapter (Includes items 1 thru 8)
1 3-4173 SUPPORT, Stand-up Tube L.H. (shown installed)
2 3-4172 SUPPORT, Stand-up Tube R.H. (shown installed)
3 3-1494 ADAPTER, Alignment (2)
4 4-0635 WELDMENT, Adapter
-- 6-1338 BAG, Hardware (Includes indented items below)
5 9-1260 BOLT, 5/16-18 x 1-1/4” Hex Head, Grade 8 (6)
6 9-1296 WASHER, 5/16” Flat, Grade 5 (4)
7 9-1315 WASHER, 5/16” Split Lock (6)
8 9-1511 NUT, 5/16-18 Hex, Grade 5 (10)
LT SERIES (Small Frame) MANUAL No. 06613
33
ACCESSORY, BAG-N-WAGON ADAPTER 6-0957
(for LT12D Series)
ITEM PART NO. DESCRIPTION
-- 6-0957 KIT, Bag-N-Wagon Adapter (Includes items 1 thru 3)
1 4-0635 WELDMENT, Adapter
-- 6-0979 BAG, Hardware (Includes indented items below)
2 9-0595 BOLT, 5/16-18 x 3/4” Hex Flange Lock, Grade 5 (4)
3 1-6116 NUT, 5/16” Push-on (4)
MANUAL No. 06613 LT SERIES (Small Frame)
34
6-1089 ACCESSORY, BAG-N-WAGON ADAPTER
(for Hydro and Gear Drive Models)
NOTE: Rear cover is removed in this view.
* Component of Bag-N-Wagon Kit.
ITEM PART NO. DESCRIPTION
-- 6-1089 KIT, Bag-N-Wagon Adapter (Includes items 1 thru 4)
1 4-0991 WELDMENT, Adapter
2 3-3371 DRAWBAR, Lower
-- 6-1092 BAG, Hardware (Includes indented items below)
3 1-6116 NUT, 5/16” Push-on (2)
4 9-1541 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap(4)
LT SERIES (Small Frame) MANUAL No. 06613
35
ACCESSORY, FRONT BUMPER KIT 6-3123
ACCESSORY, WATER BOTTLE KIT 6-3203
MANUAL No. 06613 LT SERIES (Small Frame)
36
6-1320 ACCESSORY, IMPLEMENT LIFT LEVER KIT
6-3240 ACCESSORY, BEARING PRE-SEAL KIT
(for 48” decks with field replaceable spindles)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
37
ACCESSORY, DUMP WAGON 6-0697
MANUAL No. 06613 LT SERIES (Small Frame)
38
6-0697 ACCESSORY, DUMP WAGON
ITEM PART NO. DESCRIPTION
- 6-0697 KIT, Dump Wagon (Includes items 1 thru 29)
1 4-0446 BODY, Dump Wagon
2 3-9604 SUPPORT, Axle
3 3-1949 AXLE
4 3-1946 TONGUE
5 4-7869 DRAW-BAR
6 5-2667 ASSEMBLY, Wheel/Tire, Pneumatic (2) (Incl. Indented items)
- 1-1820 TIRE, 4.10/3.50 x 4
- 1-0819 RIM (Includes indented items)
- 1-0807 BEARING, Ball (2)
- 1-4247 FITTING, Lube
- 1-0821 TUBE, Inner
7 3-7737 BASE, Latch (Yoke)
8 3-7736 LATCH
9 1-2391 GRIP, Latch
10 1-1078 BOLT, 5/16-18 Hex Shoulder
11 1-1079 WASHER, Spring
12 9-0187 WASHER, 5/16 Split Lock
13 9-0196 NUT, 5/16-18 Hex
14 1-3694 SPRING, Latch
15 9-0074 BOLT, 1/4-20 x 3/4” Short Square Neck Carriage, Grade 5 (8)
16 1-2485 RETAINER, 1/4” Bolt (6)
17 9-0053 WASHER, 1/4” Internal Tooth Lock (8)
18 9-0063 NUT, 1/4-20 Hex (8)
19 3-1038 CAP, Dust 92)
20 1-1032 WASHER, Felt (2)
21 1-0935 WASHER, Spacer (6)
22 9-0364 PIN, 5/32 x 1” Cotter (2)
23 1-1022 CAP, Hub (2)
24 1-1768 PIN, 1/2 x 2” Clevis
25 1-5067 PIN, 1/16 x 1-7/16” Hair Cotter
26 1-1713 PIN, 3/8 x 2-1/4” Clevis
27 1-1714 PIN, 3/32 x 1-7/8” Hair Cotter
28 1-6648 DECAL, Snapper (2)
29 1-2464 DECAL, Maximum Load
LT (Small Frame) ACCESSORIES MANUAL No. 06613
39
BAG-N-WAGON (Complete) 6-0947
(Tube Section)
MANUAL No. 06613 LT SERIES (Small Frame)
40
6-0947 BAG-N-WAGON (Complete)
(Tube Section)
ITEM PART NO. DESCRIPTION
-- 6-0947 KIT, Snapper Bag-N-Wagon (complete – see pages 40 through 45)
-- 6-0964 KIT, Wagon Cover (Part of 6-0947) (see page 35, item 1)
2 5-7816 ASSEMBLY, Deck Adapter/Decal (includes Adapter, 1-9912 and
Decal, 4-6720)
3 2-3115 TUBE, Grass (8” Diameter
4 1-8985 TUBE, Grass (10” Diameter)
5 6-0592 BAG, Hardware (see page 31 for components)
6 6-0480 KIT, Air lift (Includes items 17 thru 20)
7* 3-7725 BRACKET, Stand-Off (not shown)
8 3-1951 LATCH, Tube
9 3-7745 HANDLE, Tube
10 3-1952 BASE, Tube Handle
11 9-0383 BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5
12 9-0375 WING-NUT, 5/16-18
13 9-0074 BOLT, 1/4-20 x 3/4” Short Neck Carriage, Grade 5 (6)
14 9-0063 NUT, 1/4-20 (6)
15 9-0053 WASHER, 1/4” Internal Tooth Lock (6)
16 9-0188 WASHER, 5/16” Flat (2)
-- 6-0480 KIT, Air Lift (Includes items 17 thru 20 below)
17 9-0228 SCREW, 5/16-24 x 11/16” Oval Head Machine (6)
18 9-0391 WASHER, 5/16” Internal Tooth Lock (6)
19 9-0223 NUT, 5/16-24 Hex (6)
20 3-7723 AIR LIFT (2)
21* 9-0548 SCREW, 1/4-20 x 1” Hex Head Cap, Grade 5 (not shown)
-- 5-1420 ASSEMBLY, Latch (components listed on page 43, item #’s 7, 8, 9, 10, 34, 35,
36, & 37)
*NOTE: Used on Rear Engine Riders only.
LT (Small Frame) ACCESSORIES MANUAL No. 06613
41
ACCESSORY, BAG-N-WAGON 6-0947
(Hitch and Body Section)
MANUAL No. 06613 LT SERIES (Small Frame)
42
6-0947 ACCESSORY, BAG-N-WAGON
0447 is comprised of
items 11, 12, 13, 14, 15, 16, 31 and 38
(Hitch and Body Section)
ITEM PART NO. DESCRIPTION
1 5-1935 ASSEMBLY, Hitch (Includes items 17 thru 30 & 40 thru 44)
2 4-0446 BODY, Wagon Cart
3 3-9604 SUPPORT, Axle
4 3-1949 AXLE
5 5-2667 ASSEMBLY, Wheel/Tire, Pneumatic (Includes indented
items below) (may also use 5-1449 or 5-2305) (2)
-- 1-0820 TIRE, 4.10/3.50x4
-- 1-0819 RIM (Includes indented items below)
-- 1-1807 BEARING, Ball (2)
-- 1-4247 FITTING, Lube
-- 1-0821 TUBE, Inner
6 3-1946 TONGUE
7 1-2391 GRIP, Latch
8 3-7736 LATCH
9 1-3694 SPRING, Latch
10 3-7737 YOKE
11 1-1032 WASHER, Felt (2)
12 1-0935 WASHER, 3/4” (6)
13 9-0364 PIN, 5/32 x 1” Cotter (2)
14 1-1022 COVER, Dust (2)
15 1-1713 PIN, 3/8 x 2-1/4” Clevis
16 1-1714 HAIRPIN, 3/32”
17 1-2388* BALL, Hitch
18 2-1762* COLLAR, Hitch
19 2-9562* BAR, Upper Draw
20 3-7742* BRACE, Draw Bar
21 3-7743* BAR, Lower Draw
22 9-0160* SCREW, 3/8-24 x 1” Hex Head Cap, Grade 5
23 9-0118* WASHER, 3/8” Split Lock
24 9-0155* NUT, 3/8-24 Hex, Grade 2
25 9-0247* WASHER, 7/16” Split Lock
26 9-0460* NUT, 7/16-20 Hex, Grade B
27 1-2389* PIN, Hitch Clevis
28 9-0268* SCREW, 1/2-20 x 1” Hex Head Cap, Grade 2
29 9-0819* NUT, 1/2-20 Hex Jam Lock
30 1-5067* HAIRPIN, 3/32 x 1-19/32”
31 1-2485 RETAINER, 1/4” Bolt (6)
32 9-0053 WASHER, 1/4” Internal Tooth Lock (8)
33 9-0063 NUT, 1/4-20 Hex (8)
34 1-1078 BOLT, 5/16-18 Shoulder
35 1-1079 WASHER, Spring
36 9-0187 WASHER, 5/16” Split Lock
37 9-0196 NUT, 5/16-18 Hex
38 3-1038 DUST-CAP (2)
39 9-0074 BOLT, 1/4-20 x 3/4” Short Neck Carriage, Grade 5 (6)
40 2-7713 CLIP, Retaining
41 9-0206 SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 2
42 9-0203 SCREW, 5/16-18 x 1/2” Hex Head Cap, Grade 2
43 9-0391 WASHER, 5/16” Internal Tooth Lock
44 9-0184 NUT, 5/16-18 Hex Center Lock
45 1-6648 DECAL, Snapper (1-8593 may be used) (2)
46 1-2464 DECAL, Maximum Load
See Pages 38 and 39 for Dump Wagon Kit.
LT (Small Frame) ACCESSORIES MANUAL No. 06613
43
*KIT #6-0734 (Hitch Assembly)
is comprised of these items.
HARDWARE BAG #6-
shown on this page.
ACCESSORY, BAG-N-WAGON 6-0947
(6-0964 Cover Section)
MANUAL No. 06613 LT SERIES (Small Frame)
44
6-0947 ACCESSORY, BAG-N-WAGON
(Cover Section)
ITEM PART NO. DESCRIPTION
1 6-0964 KIT, Bag-N-Wagon Cover (Includes hitch assembly, chute and air lifts as
well as items 2 thru 35)
2 5-1936 ASSEMBLY, Frame & Canopy (Includes items 3 thru 27)
3 2-3818 CANOPY, Cloth Only (CHARCOAL); (1-2396, White)
4 3-1943 FRAME, Center
5 3-1945 FRAME, Base
-- 6-0592 BAG, Hardware (Includes indented items below)
6 3-1950 LOCK, Canopy
7 3-1941 BRACE, Frame (2)
8 3-1944 FRAME, Front
9 3-1939 CLAMP, Rod (2)
10 3-1938 BRACKET, Corner (2)
11 3-1948 CLIP, Hinge
12 2-1761 PIN, Hinge
13 3-1940 MOUNT, Hinge
14 3-1942 STRUT, Frame (2)
15 3-1956 CLAMP, Strut (2)
16 9-0074 BOLT, 1/4-20 x 3/4” Short Neck Carriage, Grade 5 (3)
17 2-3791 RING, Plastic Wear (2)
18 1-2393 PIN, 1/4 x 1-1/8” Clevis (6)
19 1-2407 PIN, 5/16 x 1-11/16” Clevis (2)
20 1-2431 HAIRPIN, 1/4” (6)
21 1-5067 HAIRPIN, 3/32 x 1-19/32” (2)
22 9-0496 BOLT, 1/4-20 1” Square Neck Carriage, Grade 2 (6)
23 9-0053 WASHER, 1/4” Internal Tooth Lock (9)
24 9-0063 NUT, 1/4-20 Hex (9)
25 9-0160 SCREW, 3/8-24 x 1” Hex Head Cap, Grade 5
26 9-0118 WASHER, 3/8” Split Lock
27 9-0155 NUT, 3/8-24 Hex, Grade 2
28 3-1951 LATCH, Tube Chute (see page 41, item 8)
29 3-1952 BASE, Handle(see page 41, item 10)
30 3-7745 HANDLE, Tube(see page 41, item 9)
31 3-7725 BRACKET, Stand-off (not shown)
32 9-0188 WASHER, 5/16” Flat (not shown) (2)
33 9-0375 WING-NUT, 5/16-18 (not shown)
34 9-0383 BOLT, 5/16-18 x 1” Square Neck Carriage, Grade 5 (not shown)
35 9-0548 BOLT, 1/4-20 x 1” Hex Head Cap, Grade 5 (not shown)
36 1-8985 TUBE, Grass (see page 41, item 4)
37 5-7816 ADAPTER, Bagger (includes Decal #4-7620) (see page 41, item 2)
38 2-3115 GRASS TUBE, Bag-N-Wagon (see page 41, item 3)
39 5-1935 ASSEMBLY, Hitch (see page 43, item 1)
40 6-0480 KIT, Air Lift (see page 41, item 6)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
45
ACCESSORY, 36” SNOW BLADE 6-0873
(for 3-Piece Frame Tractors)
MANUAL No. 06613 LT SERIES (Small Frame)
46
6-0873 ACCESSORY, 36” SNOW BLADE
(for 3-Piece Frame Tractors)
ITEM PART NO. DESCRIPTION
-- 6-0873 KIT, Snow Blade (Includes items 1 thru 30)
1 3-8403 ROD, Lift
2 4-1617 WELDMENT, Bracket, 36/42 Snow Blade
3 3-4230 EXTENSION, Lift, 36/42 Snow Blade
-- 5-7391 ASSEMBLY, Dozer Blade (Includes indented items below)
4 4-7727 WELDMENT, Blade
5 3-7733 SCRAPER
6 4-0445 WELDMENT, Slide (2)
7 9-0546 NUT, 3/8-15 Hex Center Lock, Grade 5 or B (9)
8 9-0747 BOLT, 3/8-16 x 1” Square Neck Carriage, Grade 2 (4)
9 9-0850 BOLT, 3/8-16 x 3/4” Short Neck Carriage, Grade 2 (5)
-- 6-0930 BOX, Accessory (Includes indented items below)
10 2-1153 PIN, Holding
11 3-2725 BRACKET, Mount (2)
12 3-2726 BAR, Hanger (2)
13 3-8399 PLATE, Hanger (2)
14 3-8400 TIE BAR, Side (2)
-- 6-0872 BAG, Hardware (Includes items 15 thru 30)
15 1-1714 HAIR PIN, 3/32 x 1-1/8” (4)
16 3-1002 PIN
17 3-2397 PLATE, Lockout
18 3-2763 TAB, Lift Lever (2)
19 9-0005 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (2)
20 9-0017 SCREW, 1/2-20 x 2-3/4” Hex Head Cap, Grade 5
21 9-0053 WASHER, 1/4” Internal Tooth Lock (2)
22 9-0063 NUT, 1/4-20 Hex (2)
23 9-0143 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, Grade 5 (4)
24 9-0130 NUT, 3/8-16 Hex (14)
25 9-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (12)
26 9-0266 NUT, 1/2-20 Hex Center Lock
27 9-0390 WASHER, 3/8” Internal Tooth Lock (16)
28 2-3682 REFLECTOR, Red (2) (not shown)
29 9-0803 BOLT, 1/4-20 x 5/8” (2)
30 9-0583 NUT, 1/4-20 Hex Flange Lock (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
47
ACCESSORY, 42” SNOW BLADE 6-1347
(for 3-Piece Frame Tractors)
MANUAL No. 06613 LT SERIES (Small Frame)
48
6-1347 ACCESSORY, 42” SNOW BLADE
(for 3-Piece Frame Tractors)
ITEM PART NO. DESCRIPTION
-- 6-1347 KIT, Snow Blade (Includes items 1 thru 30)
1 3-8403 ROD, Lift
2 4-1617 WELDMENT, Bracket, 36/42 Snow Blade
3 3-4230 EXTENSION, Lift, 36/42 Snow Blade
-- 5-3388 ASSEMBLY, 42” Dozer Blade (Includes indented items below)
4 4-1616 WELDMENT, 42” Blade
5 3-8145 SCRAPER
6 4-0445 WELDMENT, Slide (2)
7 9-0546 NUT, 3/8-15 Hex Center Lock, Grade 5 or B (9)
8 9-0747 BOLT, 3/8-16 x 1” Square Neck Carriage, Grade 2 (4)
9 9-0850 BOLT, 3/8-16 x 3/4” Short Neck Carriage, Grade 2 (5)
-- 6-0930 BOX, Accessory (Includes indented items below)
10 2-1153 PIN, Holding
11 3-2725 BRACKET, Mount (2)
12 3-2726 BAR, Hanger (2)
13 3-8399 PLATE, Hanger (2)
14 3-8400 TIE BAR, Side (2)
-- 6-0872 BAG, Hardware (Includes items 15 thru 30)
15 1-1714 HAIR PIN, 3/32 x 1-1/8” (4)
16 3-1002 PIN
17 3-2397 PLATE, Lockout
18 3-2763 TAB, Lift Lever (2)
19 9-0005 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (2)
20 9-0017 SCREW, 1/2-20 x 2-3/4” Hex Head Cap, Grade 5
21 9-0053 WASHER, 1/4” Internal Tooth Lock (2)
22 9-0063 NUT, 1/4-20 Hex (2)
23 9-0143 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, Grade 5 (4)
24 9-0130 NUT, 3/8-16 Hex (14)
25 9-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (12)
26 9-0266 NUT, 1/2-20 Hex Center Lock
27 9-0390 WASHER, 3/8” Internal Tooth Lock (16)
28 2-3682 REFLECTOR, Red (2) (not shown)
29 9-0803 BOLT, 1/4-20 x 5/8” (2)
30 9-0583 NUT, 1/4-20 Hex Flange Lock (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
49
ACCESSORY, 42” SNOW BLADE 6-1352
(for 1-Piece Frame Hydro Drive Tractors)
To install this kit, you will need the
Snowblade Support Assembly Kit,
Part Number 6-1370
MANUAL No. 06613 LT SERIES (Small Frame)
NOTE:
50
6-1352 ACCESSORY, 42” SNOW BLADE
(for 1-Piece Frame Hydro Drive Tractors)
ITEM PART NO. DESCRIPTION
-- 6-1352 KIT, Snow Blade (Includes items 1 thru 33)
1 3-8403 ROD, Lift
2 4-1617 WELDMENT, Bracket, 36/42 Snow Blade
3 3-4230 EXTENSION, Lift, 36/42 Snow Blade
-- 5-3388 ASSEMBLY, 42” Dozer Blade (Includes indented items below)
4 4-1616 WELDMENT, 42” Blade
5 3-8145 SCRAPER
6 4-0445 WELDMENT, Slide (2)
7 9-0546 NUT, 3/8-15 Hex Center Lock, Grade 5 or B (9)
8 9-0747 BOLT, 3/8-16 x 1” Square Neck Carriage, Grade 2 (4)
9 9-0850 BOLT, 3/8-16 x 3/4” Short Neck Carriage, Grade 2 (5)
-- 6-1354 BOX, Accessory (Includes indented items below)
10 2-1153 PIN, Holding
11 3-2725 BRACKET, Mount (2)
12 3-4105 DETENT, High Lockout
13 4-1640 WELDMENT, Frame Reinforcement
14 3-4839 BRACE, Latch (Snow)
15 9-1255 U-BOLT, 5/16-18
-- 6-1356 BAG, Hardware (Includes items 16 thru 33)
16 3-1002 PIN
17 1-1714 HAIR PIN, 3/32 x 1-1/8” (4)
18 3-2763 TAB, Lift Lever (2)
19 9-0005 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (2)
20 9-0017 SCREW, 1/2-20 x 2-3/4” Hex Head Cap, Grade 5
21 9-0053 WASHER, 1/4” Internal Tooth Lock (2)
22 9-0063 NUT, 1/4-20 Hex (2)
23 1-1768 PIN, 1/2” x 2” Clevis (3)
24 9-0130 NUT, 3/8-16 Hex (8)
25 9-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (8)
26 9-0250 WASHER, 1/2” SAE Flat (3)
27 9-0390 WASHER, 3/8” Internal Tooth Lock (6)
28 2-3682 REFLECTOR, Red (2) (not shown)
29 9-0803 BOLT, 1/4-20 x 5/8” (2)
30 9-0583 NUT, 1/4-20 Hex Flange Lock (2)
31 1-1773 HAIR PIN, 3/32” (3)
32 9-0266 NUT, 1/2-20 Hex Center Lock
33 9-1067 NUT, 5/16-18 Hex Center Lock, Grade B (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
51
ACCESSORY, SNOW BLADE SUPPORT 6-1370
(for 1-Piece Frame Hydro Drive Tractors)
ITEM PART NO. DESCRIPTION
-- 6-1370 KIT, Snow Blade Support (Includes all below in a box)
-- 5-3443 ASSEMBLY, Snow Blade Support (Includes indented items below)
1 4-1632 WELDMENT, Support Tube
2 2-8237 PLATE, Lower Pulley Support
3 9-1585 NUT, 3/8-16 Hex Center Lock, Grade 5 or B (4)
4 9-1305 SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5 (4)
ACCESSORY, SNOW THROWER SUPPORT UPDATE KIT 6-1781
(for SERIES A & B 1-Piece Frame Hydro Drive Tractors)
MANUAL No. 06613 LT SERIES (Small Frame)
52
6-0720 ACCESSORY, LIFT HANDLE
ITEM PART NO. DESCRIPTION
-- 6-0720 KIT, Lift Handle (Includes 1 Thru 9)
1 4-7868 WELDMENT, Lift Handle
2 3-2435 PLUNGER
-- 6-0720 BAG, Hardware (Includes indented items below)
3 1-5019 PLUG, Nylon
4 1-4432 SPRING
5 9-0881 PIN, 3/16 x 2” Groove
6 1-3250 KEY, 1/4 x 1” Square
7 1-4361 CAP, Lift Release
8 1-3948 GRIP, Handle
9 1-5020 RING, 7/8” External Retaining
LT (Small Frame) ACCESSORIES MANUAL No. 06613
53
ACCESSORY, 30” RECYCLE KIT 6-1254
ITEM PART NO. DESCRIPTION
-- 6-1254 KIT, 30” Recycle (Includes items 1 Thru 7)
1 2-6565 BLADE, 30” Ninja
2 3-3996 BAFFLE, 30” Deck
3 3-3997 ANGLE, 30” Deck Brace
4 3-3998 ANGLE, 30” Deck Brace
5 3-3999 BAFFLE, 30” Deck
-- 6-1301 BAG, Hardware (Includes items listed below)
6 9-1026 BOLT, 5/16-18 x 5/8” Short Neck carriage, Grade 5 (8)
7 9-1070 NUT, 5/16-18 Hex Flange (8)
MANUAL No. 06613 LT SERIES (Small Frame)
54
6-1051 ACCESSORY, 33” RECYCLE KIT
ITEM PART NO. DESCRIPTION
-- 6-1051 KIT, 33” Recycle (Incl. 1-11)
1 1-6982 BLADE, 33” Recycling
2 1-6984 COVER, 33” Side Chute
-- 6-1093 BAG, Hardware (Incl. 3-11)
3 1-7176 DECAL, Recy. Ground Speed
4 1-7328 DECAL, Recycling Ht. of Cut
5 2-2325 DECAL, Cut Height
LT (Small Frame) ACCESSORIES MANUAL No. 06613
ITEM PART NO. DESCRIPTION
6 9-0001 BOLT, 5/16-18 x 3/4” Short Neck
Carriage, Grade 5 (3)
7 9-0188 WASHER, 5/16” Flat (3)
8 9-0392 SCREW, 1/2-20 x 1” Hex Head
Cap, Grade 5 (2)
9 9-0492 WING-NUT, 5/16-18 (3)
10 9-0509 WASHER, 1/2” Internal Tooth (2)
11 9-0559 NUT, 1/2-20 Hex Jam (2)
55
ACCESSORY, 33” NINJA RECYCLE KIT 6-1255
ITEM PART NO. DESCRIPTION
-- 6-1255 KIT, 33” Recycle (Incl. 1-11)
1 2-4741 BLADE, 33” Ninja Recycling
2 1-6984 COVER, 33” Side Chute
-- 6-1271 BAG, Hardware (Incl. 3-11)
3 1-7176 DECAL, Recy. Ground Speed
4 1-7328 DECAL, Recycling Ht. of Cut
5 2-2325 DECAL, Cut Height
MANUAL No. 06613 LT SERIES (Small Frame)
ITEM PART NO. DESCRIPTION
6 9-0001 BOLT, 5/16-18 x 3/4” Short Neck
Carriage, Grade 5 (3)
7 9-0188 WASHER, 5/16” Flat (3)
8 9-0392 SCREW, 1/2-20 x 1” Hex Head
Cap, Grade 5 (2)
9 9-0492 WING-NUT, 5/16-18 (3)
10 9-0509 WASHER, 1/2” Internal Tooth (2)
11 9-0559 NUT, 1/2-20 Hex Jam (2)
56
6-1257 ACCESSORY, 38” RECYCLE/MULCHER KIT
ITEM PART NO. DESCRIPTION
-- 6-1257 KIT, 38” Recycle/Mulcher (Includes items 1 thru 5)
1 2-6198 COVER, 38” Mulching Deck
2 2-6597 BLADE, 19-1/2” Ninja (2)
3 2-6749 WASHER, Ninja Blade (2)
4 1-7176 DECAL, Recycling Ground Speed
5 2-6768 DECAL, Height of Cut
Note: This decal used only on “Ground Following” decks.
LT (Small Frame) ACCESSORIES MANUAL No. 06613
57
ACCESSORY, 38” RECYCLE KITS 6-1877/6-1878
*
*
EXISTING BLADE HARDWARE
*
DECK
7
BEARING
RETAINER
2
ITEM PART NO. DESCRIPTION
- 6-1877 KIT, Wave Recycling (38" Models) (Incl. Items 3 Thru 17)
- 6-1878 KIT, Ninja Recycling (38" Models) (Includes Items 1 Thru 10)
1 2-6597 BLADE, 19-1/2” Ninja (Quad Edge)
2 2-6749 WASHER, Ninja Blade (2)
3 3-6543 TEENUT, 5/16-18
4 4-5178 BRACKET, Strap Mounting
5 9-1296 WASHER, 5/16” Flat
6 9-1619 NUT, 3/8-16 Hex Flange Lock
7 9-1833 SCREW, 5/16-18 x 5/8” Cross Recess Pan Head Nyloc
8 9-1923 BOLT, 3/8-16 x 3/4” Square Neck Carriage
9 1-7176 DECAL, Recycling Ground Speeds
10 5-4334 ASSEMBLY, Mulching Cover & Strap (Incl. items 11 thru 16)
11 2-9398 COVER, Mulching (38” Deck)
12 3-6404 NUT, #10-24 Weld (2)
13 3-6415 SCREW, #10-24 Pan Head Cross Recess (2)
14 3-6422 WASHER, .190 I.D., 3/4” O.D. Flat (2)
15 3-6433 STRAP, Bag Adapter Mounting (2)
16 9-1552 WASHER, .219 I.D., 1/2” O.D. (2)
17 3-6548 BLADE, 19.64” Mulching Wave (2)
MANUAL No. 06613 LT SERIES (Small Frame)
10
5
3
NOTCH
SPINDLE
1
13
9
10
6
4
8
ITEM 10 ASSEMBLY
11
15
14
16
12
17
58
6-1220 ACCESSORY, 41” RECYCLE KIT
ITEM PART NO. DESCRIPTION
-- 6-1220 KIT, 41” Recycle (Includes items 1 thru 4)
1 2-6407 BLADE, 21” Ninja (2)
2 4-1372 COVER, 41” Recycling
3 9-0316 BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 5 (2)
4 9-0375 WING-NUT, 5/16-18 (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
59
6-1987 ACCESSORY, 42” RECYCLE KIT
(for Series D and later models)
ITEM PART NO. DESCRIPTION
-- 6-1987 KIT, 42” Recycle (Includes items 1 thru 7)
1 2-6407 BLADE, 21” Ninja (2)
2 4-5087 WELDMENT, 42” Recycling Cover
3 9-0316 BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 5 (2)
4 9-0375 WING-NUT, 5/16-18 (2)
5 9-1514 WASHER, 3/8” SAE Flat
6 9-1585 NUT, 3/8-16 Hex Center Lock, Grade 5 or B
7 9-1588 BOLT, 3/8-16 x 3/4” Hex Flange Lock, Grade 5
MANUAL No. 06613 LT SERIES (Small Frame)
60
6-3110 ACCESSORY 48” (WAVE) MULCHING
ITEM PART NO. DESCRIPTION
4
NOTE: A 11/32” diameter hole must be drilled to install Mulching Cover.
3
2
“EXISTING”
FASTENERS
1
Refer to kit instructions.
- 6-3110 KIT, (Includes Items 1 Thru 4)
1 7-3287 BLADE, Mulching (Positive Wave, 5/8” Hole, 16-1/2” Length) (3)
2 5-8276 WELDMENT, Mulching Cover
3 9-1508 BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5
4 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5
LT (Small Frame) ACCESSORIES MANUAL No. 06613
61
ACCESSORY, HOOD REPLACEMENT KIT 61094
(for Series 0 Gear Drive models)
MANUAL No. 06613 LT SERIES (Small Frame)
62
6-1094 ACCESSORY, HOOD REPLACEMENT KIT
(for Series 0 Gear Drive models)
ITEM PART NO. DESCRIPTION
-- 6-1094 KIT, LT Hood Update (Includes all items listed below)
-- 5-2921 ASSEMBLY, OPPLT Hood (Includes items 1 thru 13)
1 2-4605 HOOD, LT-Modified
2 2-9620 SUPPORT, Hood
3 9-1106 SCREW, M4.8 x 1.59 x 16.00mm Sems (5)
4 2-4893 LENS, Black Bezel
5 2-6172 LAMP, 1141 (2)
6 2-4709 SOCKET, Headlight (Snap-in) (2)
7 2-6171 HARNESS, Headlight Wiring (M & G Sockets)
8 2-6482 CLIP, “J” (open type)
9 7-6978 NUT, 1/4-20 Hex Nyloc (2)
10 1-7174 DECAL, R.H. Lens
11 1-7175 DECAL, L.H. lens
12 2-4718 LATCH, Spring
13 9-0999 SCREW, 1/4-20 x 5/8” Truss Head Torx (2)
14 3-3307 QUADRANT, Lift
15 1-9363 KNOB, Lift Handle
-- 5-2498 ASSEMBLY, Lift Handle (Includes items 16 thru 20)
16 1-4432 SPRING
17 1-5019 PLUG, Nylon
18 3-3047 ROD, Lift Lever
19 4-0698 WELDMENT, Lift Handle
20 9-0881 PIN, 3/16 x 2” Groove
-- 6-1095 BAG, Hardware (Includes items 21 thru 27)
21 1-4361 CAP, Lift Rod
22 1-7445 DECAL, Cut Height
23 3-3176 INDICATOR, Cut Height
24 9-0583 NUT, 1/4-20 Hex Flange Lock (2)
25 9-0585 NUT, 5/16-18 Hex Flange Lock, Grade 5 (2)
26 9-0803 SCREW, 1/4-20 x 5/8” Flat Head Square Neck, Grade 2 (2)
27 9-1000 SCREW, 5/16-18 x 7/8” Truss Head Torx (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
63
ACCESSORY, HOOD REPLACEMENT KIT 6-1383
(for 1 & 3-Piece Frame models)
MANUAL No. 06613 LT SERIES (Small Frame)
64
6-1383 ACCESSORY, HOOD REPLACEMENT KIT
(for 1 & 3-Piece Frame models)
ITEM PART NO. DESCRIPTION
-- 6-1383 KIT, LT Mozart Hood Replacement (Includes all items listed below)
-- 5-3525 ASSEMBLY, Hood, Moz art-Scoop (Includes items 1 thru 22)
1 2-6406 HOOD, Mozart-Scoop-Red
2 3-4324 BRACE, Hood Support/Stop
3 9-1106 SCREW, M4.8 x 1.59 x 16.00mm Sems (5)
4 2-9602 LENS, Rippled-Sloped
5 2-6172 LAMP, 1141 (2)
6 2-4709 SOCKET, Headlight (Snap-in) (2)
7 2-6171 HARNESS, Headlight Wiring (M & G Sockets)
8 2-6482 CLIP, “J” (open type)
9 7-6978 NUT, 1/4-20 Hex Nyloc (6)
10 2-6179 DECAL, R.H. Lens/Reflector
11 2-6180 DECAL, L.H. Lens/Reflector
12 2-4718 LATCH, Spring (for 1-Piece Frame)
13 9-0999 SCREW, 1/4-20 x 5/8” Truss Head Torx (2)
14 1-6766 ROD, Hood Support
15 2-9570 GRILL, Sloped-Black
16 2-9571 PANEL, R.H. Side-Black
17 2-9572 PANEL, L.H. Side-Black
18 9-0803 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, Grade 2 (4)
19 1-3847 RETAINER, 3/8” Bolt (2)
20 2-4061 BOLT, 3/8-16 Shoulder (2, plus 2 in hardware bag)
21 9-0858 SCREW, 5/16-18 x 1/2” Hex Washer Self-tap (4)
22 9-1095 POP RIVET, 1/8 x 3/8” (8)
-- 6-1384 BAG, Hardware (Includes items 23 thru 29)
23 1-7359 CLIP, Hood Latch (for 3-Piece Frame)
24 2-4616 BUSHING, Flange (2)
25 2-8932 BRACKET, Hood, Mozart LTH (2)
26 3-3488 BRACKET, Hood Pivot (2)
27 9-0613 NUT, 3/8-16 Hex Flange Lock (4)
28 9-1086 BOLT, 3/8-16 x 3/4” Hex Head, Grade 5 (2)
29 9-1151 SCREW, 5/16-18 x 1-1/4” Hex Washer Self-tap (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613
65
OTHER ACCESSORY KITS
KIT No. DESCRIPTION _
3-2392 TOOL, Smooth Clutch
-used to replace rubber disc without bending it’s hub which causes vibration
6-0327 KIT, Wheel Hub Puller
-to pull LTD wheel hubs
6-0694 KIT, Yoke Spring Attachment
-to increase life of the driven disc
6-1000 KIT, Reverse Assist (for LT12D Series)
-to replace Shift Link Spring for greater shifting control
6-1025 KIT, Brake Cable Extension (for LT12D Series)
6-1163 KIT, Cold Starting (for Hydro Drive Series)
-to provide easier starting in cold weather by disengaging the traction drive belt
6-0691 KIT, Chute Brace (for Snow Thrower Attachment)
6-1289 KIT, 30” Cutting Deck Replacement (for Gear Drive models)
-Includes Deck, Spindle, Belt and Blade
6-1288 KIT, 33” Cutting Deck Replacement (for Gear Drive models)
-Includes Deck, Spindle, Belt and Blade
6-1290 KIT, 38” Cutting Deck Replacement (for Gear Drive models)
-Includes Deck, Spindles, Belt and Blades
6-1314 KIT, 38” Ground Following Cutting Deck Replacement (Hydro Drive models)
-Includes Deck, Spindles, Belt, Blades and Roller
6-1299 KIT, 38” Ground Following Cutting Deck Replacement (for Gear Drive models)
-Includes Deck, Spindles, Belt, Blades and Roller
6-1283 KIT, 42” Cutting Deck Replacement (for Gear Drive models)
-Includes Deck, Spindles, Belt and Blades
6-1266 KIT, 48” Cutting Deck Replacement (for Hydro Drive models)
-Includes Deck, Spindles, Belts and Blades
6-1355 KIT, LTD Pivot Arm Replacement
-limits yoke rotation into rubber disc and binding on chain case pin
6-1787 KIT, Drive Disc Alignment Gauge
-to check for misalignment of driven disc, which can cause early cracking and
chunking of rubber driven disc
MANUAL No. 06613 LT SERIES (Small Frame)
66
NOTES
67
Parts Manual for
LAWN TRACTOR ACCESSORIES
FOR ALL SMALL FRAME LAWN TRACTORS
WITH DISC, GEAR & HYDRO DRIVE
SERIES 0, 1, 2 & SERIES A, B, C, D, E, G, H, I
IT IS THE POLICY O F SNAPPER TO IM PRO VE ITS PRODUCTS WHENEVER IT IS POSSIBLE
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
MANUAL No. 06613 (Rev. 1, 1/24/03) Printed in U.S.A.
68
Loading...