Parts Manual fo
r
CHIPPER/SHREDDER
SERIES 0
MODEL
SAC55140BV
COPYRIGHT ©2004
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 2,
McDonough, GA, 30253 U.S.A.
9/10/2004
Manual No. 06177
TP 400-5005-2-CS-N
s
PAGE GROUP
4
6
8
Hopper & Engine Group
Housing & Rotor Group
VK 5 Vacuum Kit for 5C Model
Table Of Content
SERIES 0
Manual No. 06177CHIPPER/SHREDDER
3
TP 400-5005-2-CS-N
Hopper & Engine Group
Manual No. 06177 CHIPPER/SHREDDER
TP 400-5005-2-CS-N
4
SERIES 0
Hopper & Engine Group
p
y
Part No Descri
1 1960507 14 SCREW, Hex, Button Hd., 1/4-20 x 3/4 (Qty.10 used on
European models)
2 1098100 1 RETAINING STRIP, Hopper Guard
3 1095100 1 GUARD, Hopper
4 1930642 14 NUT, Flange, 2-Way Lock, 1/4-20 (Qty.10 used on European
models)
5 1709603 1 SUPPORT, Hopper Guard
6 3621100 1 HANDLE
7 1921319 6 WASHER, Plain, 17/64 x 518 x 3164
8 1931277 20 NUT, Whiz, 5/16-18
9 1714939 1 CASTING, Chipper Cone, 3”
10 1709469 1 HOPPER, Red
11 2005612 1 SAFETY GOGGLES
12 1926106 1 CAPSCREW, Hex, 5/16-18 x 3-1/4, Gr.5
13A 3685100 1 DEFLECTOR
13B 1709556 1 DEFLECTOR, Fi x ed (European model only)
14 5001612 3 DECAL, Danger
15 1960519 2 PUSH NUT, 1/2
16 3612100 2 WHEEL & TIRE ASSY., 1-3/4 x 12 (5/14 Only)
16 1713258 2 WHEEL & TIRE ASSY., 2-1/4 x 12 (8/14 Only)
17 1924361 2 WASHER, Plain, 17/32Plain, 17/32 x 1-1/4 x 5/64
18 1928635 2 SCREW, Taptite, 3/8 16 x 1-1/4
19 1713099 1 ROD LEG
20 1925205 10 CAPSCREW, Hex, 5/16-18 x 5/8
21 1709468 1 CONE, Chipper, Red
22 1713281 1 ENGINE PLATE ASSY.
23 * 1 ENGINE, 5 HP, Briggs & Stratton ENGINE, 8 HP, Briggs & Strat
24 1709403 1 COLLECTION BAG, 24” x 36”
25 7071916 1 DECAL, Snapper
26 1926025 2 SCREW, Round. Hd., Phillips, 1/4-20 x 1/2 (European model
only)
27 1709729 1 INSERT, Cone (European model only)
28 1921960 8 CAPSCREW, Hex, 1/4-20 x 1, Gr. 5 (European model only)
29 1960151 12 WASHER, Plain, 1/4 x 1-1/4 x 5/64 (European model only)
30 1918249 2 SCREW, Truss Hd., 5/16-18 x 3/4 (European model only)
31 1927557 2 NUT, Flange, Whiz Lock, 5/16-18 (European model only)
32 1709561 2 HOPPER HALF, Upper (European model only)
33 1917356 4 Lockwasher, 5/16
34 1921515 4 CAPSCREW, Hex Hd., 5/16-24 x 3/4
tionItem Qt
Note
Footnotes:
* See your local Briggs & Stratton dealer for service parts.
Manual No. 06177CHIPPER/SHREDDER
SERIES 0
5
TP 400-5005-2-CS-N
Housing & Rotor Group
Manual No. 06177 CHIPPER/SHREDDER
TP 400-5005-2-CS-N
6
SERIES 0
Housing & Rotor Group
p
y
Part No Descri
1 3525100 1 HOPPER LINER
2 1917356 12 * Lockwasher, Split, 5/16
3 6518100 2 CAPSCREW, Socket Hd., 3/8-16 x 5/8
4 1930647 2 NUT, 2-way Lock, 1/4-20
5 1921319 2 WASHER, Flat, 1/4
6 1960472 2 CAPSCREW, Phillips Hd., 1/4-20 x 5/8
7 5004100 1 DECAL, Caution
8 6005100 2 CAPSCREW, Socket Hd., 5/16-18 x 1/2
9 1919438 2 NUT, Nylock, 5/16-18
10 1931277 12 NUT, Flange, Hex, 5/16-18
11 3520100 1 COVER, Rotor Housing
12 1920787 8 CAPSCREW, Hex Hd., 5/16-18 x 1/2
13 3315612 2 CHIPPER KNIFE
14 905100 1 KEY, 1/4 Sq. x 1-7/8
15 3299100 1 SPACER, Rotor (5/14 Only)
15 1713206 1 SPACER, Rotor (8/14 Only)
16 1919326 2 WASHER, Flat, 5/16
17 1709617 1 * ROTOR, 1” Hub
18 6005612 4 CAPSCREW, Socket Hd., 5/16-24 x 5/8
19 1916965 7 * LOCKWASHER, Split, 3/8
20 6516100 1 CAPSCREW, Socket Hd., 3/8-24 x 2
21 1916950 2 NUT, Hex, 3/8-16
22 1709614 4 * SPACER, Tube
23 1709616 4 * SPACER, 3/4” O.D., 3/4” Long (5/14 Only)
23 1713207 4 * SPACER, 1”0.D., 33/64”Long (8/14 0nly)
24 3307612 2 HAMMER, Triangular
25 1921332 2 CAPSCREW, Hex Hd., 5/16-18 x 3/4
26 1960508 4 * CAPSCREW, Hex, Socket Hd., w/Patch, 3/8 16 x 2, Gr. 8
27 1924874 4 WASHER, Flat, 5/16
28 3307100 2 J HAMMER
29 1924940 4 * WASHER, Flat, 7/8 O.D.
30 3521100 1 HOUSING, Rotor
31 3501100 1 HOUSING, Fan
32 3505100 1 AXLE ASSEMBLY
33 5001612 1 DECAL Danger
34 6075100 1 Plug BUTTON
35 1676435 4 WASHER, Plain, 1/2 x 1-1/4 x 3/16 (8/14 0nly)
tionItem Qt
Note
Footnotes:
Manual No. 06177CHIPPER/SHREDDER
SERIES 0
7
TP 400-5005-2-CS-N
VK 5 Vacuum Kit for 5C Model
Manual No. 06177 CHIPPER/SHREDDER
TP 400-5005-2-CS-N
8
SERIES 0
VK 5 Vacuum Kit for 5C Model
p
y
Part No Descri
1A 1021100 1 ADAPTER
1B 1713522 1 ADAPTER (European model only)
2 1023100 1 COUPLER
3 1025100 1 Plug
4 1035100 1 HOSE, 10” x 4” Dia.
5 1027100 1 LEAF TRAY
6 1030100 1 NOZZLE, w/Valve Ring
7 1024100 1 VALVE RING
8 1960294 1 NUT, 1/4-20
9 1921319 2 WASHER, 1/4
10 6041612 1 SCREW, 1/4-20 x 1 1/2
11 1026100 1 HANDLE
12 1028100 1 HANDLE GRIP
13 5001612 1 DECAL, Danger
14 1709467 1 HOPPER LID (Red)
15 1919326 3 WASHER, Flat
tionItem Qt
Note
Footnotes:
Manual No. 06177CHIPPER/SHREDDER
SERIES 0
9
TP 400-5005-2-CS-N
Parts Manual fo
r
CHIPPER/SHREDDER
SERIES 0
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
COPYRIGHT ©2004
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
Revision 2,
9/10/2004
Manual No. 06177
TP 400-5005-2- C S- N
Loading...