Page 1
Parts
p
Manual
S200X Series
Zero-Turn Riding Mower
Models:
5900693 S200XBV3272, 72" 32HP Briggs & Stratton Zero-Turn Rider
5900664 S200XKAV2561, 61" 25HP Kawasaki Zero-Turn Rider
5900692 S200XKOH2761, 61" 27HP Kohler Zero-Turn Rider
5900695 S200XKAV2761, 61" 27HP Kawasaki Zero-Turn Rider
Briggs and Stratton Yard Power Products Group
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
Descri
tion:
5101093
Rev. Date:
TP 400-7329-J-M2-SP
12/2007
JRevision
Page 2
Page 3
Table Of Content
s
.
.
.
g
.
y
y
g
.
.
.
y
g
y
.
.
.
MODEL COMPONENTS PAGE
Main Frame Group ......................... ..... ...............................................................................................................................
Rear Bumper & ROPS Group ............................................................................................................................................
Seat & Kick Plate Group ....................................................................................................................................................
Fuel Tank & Mount Group ..................................................................................................................................................
Instrument Control Panel Group ........................................................................................................................................
Engine & PTO Group - 25 HP & 27HP Kawasaki ..............................................................................................................
Engine & PTO Group - 27 HP Kohler .................................................................................................................................
En
ine & PTO Group - 32HP Briggs & Stratton ................................................................................................................
Pump Drive Group .......................... ...................................................................................................................................
Motion Control Group .........................................................................................................................................................
H
draulic Group .................................................................................................................................................................
H
draulic Mount Group .................................................... ..................................................................................................
Parkin
Deck Lift Group ..................................................................................................................................................................
Wheel & Tire Group ..................... ......................................................................................................................................
Decals - Brand .................................... .................................................. .............................................................................
Decals - Safety & Information ............................................................................................................................................
72" Mower Deck - Housing, Covers, and Spindles .............................................................................................................
72" Mower Deck - Pulle
72" Mower Deck - Rollers & Casters ..................................................................................................................................
61" Mower Deck - Hanger Chains ......................................................................................................................................
61" Mower Deck - Housing, Covers, Spindles & Blades (S/N: 2012617338 & Below) .......................................................
61" Mower Deck - Housin
61" Mower Deck - Pulle
61" Mower Deck - Roller Group .........................................................................................................................................
61" & 72" Mower Deck - Rear Mount Bars .........................................................................................................................
Electrical Schematics - Kawasaki & Kohler Models ...........................................................................................................
Electrical Schematics - Briggs & Stratton Model ............................................................................................................... .
Brake Group .........................................................................................................................................................
s, Belt, and Idler Arm ...................................................................................................................
, Covers, Spindles & Blades (S/N: 2012617339 & Above) ......................................................
s, Belts & Idler Arm .....................................................................................................................
Torque Specification Chart ............................................................................................. Inside Back Cover
10
12
14
18
20
22
24
26
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60-63
64-67
4
6
8
Page 4
Main Frame Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
4
TP 400-7329-J-M2-SP
Page 5
Main Frame Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5025457 2 BOLT, 1/4-28 X 1/2, GD5 YZ
2 5020884 4 BEARING, TAPERED ROLLER, 1"
3 5025160 2 WASHER, 3/4 SAE
4 5025449 4 WASHER, BELLEVILLE - 1.500 X .755
5 5025448 2 NUT, 3/4-16, HEX JAM NYLON LOCK
6 5100882 2 CAP, CASTER SPINDLE, LOW PROFILE
7 5021072 2 SEAL, GREASE
8 5402207D 2 WELD, CASTER YOKE - RED
9 5402709D 1 WELD, MAIN FRAME SNP 61" - RED (61" Deck Models)
10 5020883 2 CUP, BEARING (SV)
11 5021379 1 GROMMET, 7/8
12 5403064D 1 WELD, MAIN FRAME SNP 72" - RED (72" Deck Models)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
5
TP 400-7329-J-M2-SP
Page 6
Rear Bumper & ROPS Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
6
TP 400-7329-J-M2-SP
Page 7
Rear Bumper & ROPS Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5100267 2 SCREW, 1/2-13 X 1.00, SHCS
2 5025396 6 NUT, 1/2-13 HEX NYLOCK FLANGE
3 5402774D 2 PLATE, SEAT BELT EXTENSION - RED
4 5100139 1 SEAT BELT, RETRACTING - ASSM (25HP KAWASAKI & 27HP KOHLER
MODELS)
5 5101110 1 ROPS, SNAPPER PRO 61
6 5025158 12 WASHER, 1/2 SAE
7 5025155 6 WASHER, 5/16 SAE
8 5025011X6 6 BOLT, 5/16-18 X 3/4 GD5
9 5025392 6 NUT, 5/16-18 HEX NYLOCK FLANGE
10 5402772D 1 PLATE, HEAT SHIELD - RED
11 5025017X26 2 BOLT, 1/2-13 X 3-1/4 GD5
12 5402760D 1 PLATE, REAR BUMPER, 61 SNP - SNP RED
13 5402776D 1 BUMPER, REAR, SNP 61 - RED
14 -- 1 ROLL BAR POST, RH (SV)
15 -- 1 ROLL BAR POST, LH (SV)
16 -- 1 ROLL BAR TOP LOOP (SV)
17 5025018X10 6 BOLT, 1/2-20 X 1-1/4" GD5 YZ
18 5025098 6 NUT, 1/2-20 HEX NYLON LOCK
19 5025056 2 NUT, 1/2-13 HEX NYLON LOCK
20 5025294X28 2 BOLT, 1/2-13 X 3-1/2, ALLEN HEAD, YZ (SV)
21 5100013 2 PIN, HITCH, .50 X 3.25 W/ LANYARD (SV)
22 5101110X1 1 HARDWARE BAG, ROPS S200X (INCLUDES ALL COMPONENTS MARKED
REF # 22)
23 5101223 1 SUPER SLEEVE BUCKLE, SEAT BELT (27HP KAWASAKI & 32HP BRIGGS
MODELS)
24 5101226 1 RETRACTOR, SEAT BELT (27HP KAWASAKI & 32HP BRIGGS MODELS)
25 5401044D 2 PLATE, SEAT BELT EXTENSION - RED (27HP KAWASAKI & 32HP BRIGGS
MODELS)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
7
TP 400-7329-J-M2-SP
Page 8
Seat & Kick Plate Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
8
TP 400-7329-J-M2-SP
Page 9
Seat & Kick Plate Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5025392 12 NUT, 5/16-18 HEX NYLOCK FLANGE
2 5025156 2 WASHER, 3/8 SAE
3 5025013X16 2 BOLT, 3/8-16 X 2 GD5 YZ
4 5025394 2 NUT, 3/8-16 HEX NYLOCK FLANGE
5 5041931 2 SPACER, .38 X .50 X 1.25
6 7078299 2 SPRING, SEAT SUPPORT
7 5044617 2 WASHER, .34 X 1.25 X 10 GA
8 5025011X18 2 BOLT, 5/16-18 X 2-1/4" GD5 YZ
9 5025127 2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
10 5101079 2 SPRING-COMP .625 ID X .105 WIRE X 1.31 LONG
11 5022198 1 SWITCH, PLUNGER, NO/NO SNAP-IN
12 5025155 4 WASHER, 5/16 SAE
13 5101113 1 SAFETY WALK, 11-1/2 X 19
14 5101114 1 SAFETY WALK, 10 X 19
15 5402754D 1 WELD, SEAT PLATE - RED
16 5402732D 1 PLATE, SEAT SWITCH - RED
17 5025011X8 4 BOLT, 5/16-18 X 1 GD5 YZ
18 5402726D 1 PLATE, FLOOR PAN, SNP 61
19 5022031 1 SEAT, GRAY, NO LOGO, CMPT (25HP KAWASAKI & 27HP KOHLER
MODELS)(INCLUDES REF NOS 21 - 25)
20 5025011X10 2 BOLT, 5/16-18 X 1-1/4 GD5 YZ
21 5022031X2 1 CUSHION, SEAT BOTTOM, GRAY (SV) (NON SUSPENSION SEAT
REPLACEMENT PARTS)
22 5022031X4 1 CUSHION, SEAT BACK, GRAY (SV) (NON SUSPENSION SEAT
REPLACEMENT PARTS)
23 5022185 1 ARM REST, COMPLETE (SV) (NON SUSPENSION SEAT REPLACEMENT
PARTS)
24 5020930X3 1 RAILS, SEAT ADJUSTER (SET OF TWO)(SV) (NON SUSPENSION SEAT
REPLACEMENT PARTS)
25 5100652 1 SPRING, EXTENSION, 4" SEAT ADJUSTERS (SV)
26 5101214 1 SEAT, SUSP. TYPE, MICHIGAN SEAT, V5300, BLK (27HP KAWASAKI & 32HP
BRIGGS MODELS)
27 5403471D 1 PLATE, SEAT SUPPORT EXTENSION (27HP KAWASAKI & 32HP BRIGGS
MODELS)
28 5025010X6 4 BOLT, 1/4-20 X 3/4 GD5 YZ (27HP KAWASAKI & 32HP BRIGGS MODELS)
29 5025391 4 NUT, 1/4-20 HEX NYLOCK FLANGE (27HP KAWASAKI & 32HP BRIGGS
MODELS)
30 5025154 4 WASHER, 1/4 SAE (27HP KAWASAKI & 32HP BRIGGS MODELS)
31 5101214X1 1 KIT, ARM REST, S/S (SV) (SUSPENSION SEAT REPLACEMENT PARTS)
32 5101214X2 1 CUSHION, BACK, S/S (SV) (SUSPENSION SEAT REPLACEMENT PARTS)
33 5101214X3 1 CUSHION, SEAT, S/S (SV) (SUSPENSION SEAT REPLACEMENT PARTS)
34 5101214X4 1 KIT, ADJUSTER, S/S (SV) (SUSPENSION SEAT REPLACEMENT PARTS)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
9
TP 400-7329-J-M2-SP
Page 10
Fuel Tank & Mount Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
10
TP 400-7329-J-M2-SP
Page 11
Fuel Tank & Mount Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5402771D 1 WELD, FUEL MOUNT, RH, SNP 2561 - RED
2 5402770D 1 WELD, FUEL MOUNT, LH, SNP 2561 - RED
3 5022917X1 2 GROMMET, FUEL GAUGE (SV)
4 5022917 2 FUEL GAUGE, 12" (SV)
5 5022158 2 CAP, FUEL TANK, 3-1/2 NECK
6 5101044 1 TANK, FUEL, SNAPPER PRO - LH (INCLUDES REF NOS 4 & 5)
7 5101043 1 TANK, FUEL, SNAPPER PRO - RH (INCLUDES REF NOS 4 & 5)
8 5025155 20 WASHER, 5/16 SAE
9 5025011X8 8 BOLT, 5/16-18 X 1 GD5 YZ
10 5025392 8 NUT, 5/16-18 HEX NYLOCK FLANGE
11 5025170 12 WASHER, 5/16 LOCK YZ
12 5025011X6 12 BOLT, 5/16-18 X 3/4 GD5
13 5025013X8 2 BOLT, 3/8-16 X 1 GD5 YZ
14 5025156 2 WASHER, 3/8 SAE
15 5401108D 1 BRACKET, FUEL VALVE, IS3000 - RED
16 5025394 2 NUT, 3/8-16 HEX NYLOCK FLANGE
17 5023358 1 VALVE, FUEL, STR. OUTLET
18 5020835 6 CLAMP, HOSE, EXTERNAL, 1/2 - RED
19 5050831X9 1 HOSE, LW PRMTN, 1/4 X 9" FUEL LINE (SV)
20 5050831X21 1 HOSE, LW PRMTN, 1/4 X 21" FUEL LINE (SV)
21 5050831X47 1 HOSE, LW PRMTN, 1/4 X 47" FUEL LINE (SV)
22 5600050 2 KIT, BUSHING FUEL (SV)
23 5101144 2 PICKUP TUBE ASSEMBLY, FUEL LINE (SV)
24 5050831X29 1 HOSE, LW PRMTN, 1/4 X 29" FUEL LINE (SV) (Kawasaki Models)
25 5021178X3 1 FUEL FILTER (SV)
26 5050831X9 1 HOSE, LW PRMTN, 1/4 X 9" FUEL LINE (SV) (Kohler Model)
27 5050831X30 1 HOSE, LW PRMTN, 1/4 X 30" FUEL LINE (SV) (Briggs Model)
28 5403582D 2 WELD, TANK MOUNT, REAR
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
11
TP 400-7329-J-M2-SP
Page 12
Instrument Control Panel Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
12
TP 400-7329-J-M2-SP
Page 13
Instrument Control Panel Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5402769A 1 PLATE, CONTROL PANEL, SNP - BLK
2 5025299X4 3 SCREW, 1/4-20 X 1/2 ALLEN BH
3 5021518 1 FUSE BLOCK (SV)
4 5025271 2 NUT, #10-24 HEX NYLON LOCK
5 5025270X16 2 SCREW, #10-24 X 2" ROUND PHILLIPS
6 5021603 4 FUSE, ATP, 20 AMP (SV)
7 5022805 1 COVER, VINYL FUSEBLOCK
8 5046501 1 CABLE, CHOKE CONTROL, 47" (FOR 25HP KAWASAKI AND 32HP BRIGGS
MODELS)
9 5025035 1 NUT, 3/8-24 HEX
10 5022222 1 RING, SWITCH RETAINER
11 5022180 1 SWITCH, BLADE ENGAGEMENT
12 5020927 1 SWITCH, IGNITION, 6 POST (INCLUDES REF NOS 20 - 22)
13 5100996 1 HOUR METER, W/ SUPRESSOR
14 5022269 1 O-RING, 7/8 ID X 1/16 W
15 1709188 1 PLUG, .820X1.44 HOLE, BLACK PLASTIC
16 5101118 1 THROTTLE CONTROL, LEVER & KNOB (INCLUDES REF NOS 24)
17 5025179X6 2 SCREW, #10-24 X 3/4" ROUND PHILLIPS
18 5025271 2 NUT, #10-24 HEX NYLON LOCK
19 5061763 2 SPACER, .20 X .38 X 1.25
20 5022789 1 KEY, IGNITION, MOLDED SET (SV)
21 5022790 1 COVER (SV)
22 5022791 1 PLASTIC NUT (SV)
23 5061650 1 CABLE, THROTTLE CONTROL, 41.5
24 5046360X1 1 KNOB, THROTTLE CONTROL (SV)
25 5061533 1 CABLE, CHOKE CONTROL, 60" (FOR 27HP KOHLER MODEL ONLY)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
13
TP 400-7329-J-M2-SP
Page 14
Engine & PTO Group - 25 HP & 27HP Kawasaki
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
14
TP 400-7329-J-M2-SP
Page 15
Engine & PTO Group - 25 HP & 27HP Kawasaki
PART NO. DESCRIPTIONREF NO. QTY.
1 5101022 1 PULLEY, 5.15 OD X 1-1/8 BORE B-SECT
2 5047033 1 SPACER, 1.13 X 1.75 X 1.03
3 5022234 1 ADAPTER, OIL DRAIN
4 5100084 1 CLUTCH, 5218-134, WARNER
5 5025154 3 WASHER, 1/4 SAE
6 5021334X1 1 OIL FILTER (49065-2078) (SV)
7 5100975 1 MUFFLER, 21HP-25HP KAWASAKI ENGINES (25HP KAWASAKI MODEL
ONLY)
8 5025392 10 NUT, 5/16-18 HEX NYLOCK FLANGE
9 5021500 1 CLAMP, VINYL INSULATED
10 5043636 1 CLUTCH ANCHOR PAD
11 5044617 3 WASHER, .34 X 1.25 X 10 GA
12 5046446 2 SPACER, .39 X 1.00 X .80
13 5025155 8 WASHER, 5/16 SAE
14 5025011X8 2 BOLT, 5/16-18 X 1 GD5 YZ
15 5025188 4 WASHER, 5/16" INT. TOOTH LOCK
16 5025011X14 6 BOLT, 5/16-18 X 1-3/4 GD5 YZ
17 5050407X8 1 KEY, 1/4 SQ. X 1.00
18 5045289 1 BOLT, CRANKSHAFT, 7/16"X2-1/2 (TORQUE CRANKSHAFT BOLT TO 65 FT
LBS (88 Nm))
19 -- 1 * ENGINE, 25HP KAWASAKI, Mod. FH721V Spec. ES27-R
20 5025139 1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
21 5025052X18 1 BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
22 5021379 1 GROMMET, 7/8
23 5048681 1 HOSE, OIL DRAIN
24 5023143 1 RAIN COVER (SV)
25 5023146 3 CLAMP (SV)
26 5023138 1 AIR FILTER ASSEMBLY (SV) (INCLUDES REF NOS 27 - 31)
27 5023139 1 CASE, AIR FILTER (SV)
28 5023140 1 AIR FILTER, SECONDARY (SV)
29 5023141 1 AIR FILTER, PRIMARY (SV)
30 5023147 2 CLAMP, CAP (SV)
31 5023144 1 CAP, FILTER CASE (SV)
32 5023145 1 CASE, BRACKET, COMPLETE (SV)
33 5023142 1 BRACKET PLATE (SV)
34 5023149 1 AIR INLET TUBE (SV)
35 5023148 1 BREATHER TUBE (SV)
36 5046416D 1 ANCHOR, CLUTCH - RED
37 5025010X6 3 BOLT, 1/4-20 X 3/4 GD5 YZ
38 1724815 1 SOLENOID-4 POLE 12 VOLT DC (TROMBETTA) (INCLUDES REF NOS 40
AND 41)
39 5025013X8 2 BOLT, 3/8-16 X 1 GD5 YZ
40 5023217 2 WASHER, 5/16 LIGHT LOCK (SV)
41 5023216 2 NUT, 5/16-24 JAM (SV)
Footnotes
NOTE: * Purchase engine components directly from engine manufacturer dealer.
The above parts group applies to the following Mfg. Nos.:
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
15
TP 400-7329-J-M2-SP
Page 16
Engine & PTO Group - 25 HP & 27HP Kawasaki
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
16
TP 400-7329-J-M2-SP
Page 17
Engine & PTO Group - 25 HP & 27HP Kawasaki
PART NO. DESCRIPTIONREF NO. QTY.
42 5025391 3 NUT, 1/4-20 HEX NYLOCK FLANGE
43 5025187 2 WASHER, 1/4 INTERNAL TOOTH LOCK
44 5025470 2 SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ
45 5100969 1 EXTENSION, MUFFLER
46 5023173 3 CLAMP, HOSE, 1" DIAMETER (Mounts to engine shroud using existing hardware
for routing of fuel lines.)
47 5025394 2 NUT, 3/8-16 HEX NYLOCK FLANGE
48 -- 1 * ENGINE, 27HP KAWASAKI
49 5100975 1 MUFFLER, 31HP KAWASAKI ENGINES (27HP KAWASAKI MODEL ONLY)
50 5048135 1 SPACER, 1.13 X 1.75 X .62
Footnotes
NOTE: * Purchase engine components directly from engine manufacturer dealer.
The above parts group applies to the following Mfg. Nos.:
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
17
TP 400-7329-J-M2-SP
Page 18
Engine & PTO Group - 27 HP Kohler
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
© Copyright Briggs and Stratton. All Rights Reserved.
2007
18
TP 400-7329-J-M2-SP
Page 19
Engine & PTO Group - 27 HP Kohler
PART NO. DESCRIPTIONREF NO. QTY.
1 5101022 1 PULLEY, 5.15 OD X 1-1/8 BORE B-SECT
2 5048135 1 SPACER, 1.13 X 1.75 X .62 YZ
3 5025391 1 NUT, 1/4-20 HEX NYLOCK FLANGE
4 5100084 1 CLUTCH
5 5025154 3 WASHER, 1/4 SAE
6 5021334X1 1 OIL FILTER (49065-2078) (SV)
7 5101275 1 MUFFLER, 21HP-27HP KOHLER ENGINES
8 5025392 10 NUT, 5/16-18 HEX NYLOCK FLANGE
9 5021500 1 CLAMP, VINYL INSULATED
10 5043636 1 CLUTCH ANCHOR PAD
11 5044617 3 WASHER, .34 X 1.25 X 10 GA
12 5025010X6 1 BOLT, 1/4-20 X 3/4 GD5 YZ
13 5025155 8 WASHER, 5/16 SAE
14 5025011X8 4 BOLT, 5/16-18 X 1 GD5 YZ
15 5025188 4 WASHER, 5/16" INT. TOOTH LOCK
16 5025011X14 4 BOLT, 5/16-18 X 1-3/4 GD5 YZ
17 5050407X8 1 KEY, 1/4 SQ. X 1.00
18 5045938 1 BOLT, CRANKSHAFT, 7/16" X 2-1/4" (TORQUE CRANKSHAFT BOLT TO 65 FT
LBS (88 Nm))
19 -- 1 * ENGINE, 27HP KOHLER
20 5025139 1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
21 5025052X18 1 BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
22 5021379 1 GROMMET, 7/8
23 5048681 1 HOSE, OIL DRAIN
24 5022892X3 1 RAIN COVER (SV)
25 5022892X4 1 KIT, AIR FILTER ASSEMBLY (SV) (INCLUDES REF NOS 24 - 31)
26 5022892X7 1 HOUSING, AIR FILTER (SV)
27 5022892X2 1 AIR FILTER, SECONDARY (SV)
28 5022892X1 1 AIR FILTER, PRIMARY (SV)
29 5022892X9 1 DUST VALVE (SV)
30 5046416D 1 ANCHOR, CLUTCH - RED
31 5022892X5 1 END CAP (SV)
32 5022892X8 1 AIR INLET TUBE (SV)
Footnotes
Note* Purchase engine components directly from engine manufacturer dealer.
The above parts group applies to the following Mfg. Nos.:
5900692
© Copyright Briggs and Stratton. All Rights Reserved.
2007
19
TP 400-7329-J-M2-SP
Page 20
Engine & PTO Group - 32HP Briggs & Stratton
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
20
TP 400-7329-J-M2-SP
Page 21
Engine & PTO Group - 32HP Briggs & Stratton
PART NO. DESCRIPTIONREF NO. QTY.
1 -- 1 * ENGINE, 32 HP B&S Mod. 543777-0120-E1
2 5025011X8 3 BOLT, 5/16-18 X 1 GD5 YZ
3 5046416D 1 CLUTCH ANCHOR - RED
4 5025394 6 NUT, 3/8-16 HEX NYLOCK FLANGE
5 5043636 1 CLUTCH ANCHOR PAD
6 5025165 3 WASHER, 3/8" FENDER
7 5025392 5 NUT, 5/16-18 HEX NYLOCK FLANGE
8 5025155 2 WASHER, 5/16 SAE
9 5045331 1 BOLT, CRANKSHAFT, 7/16" X 1-3/4"
10 5045475 1 SPACER, .45 X 1.88 X .38
11 5023233 1 ELECTRIC CLUTCH
12 5050407X16 1 KEY, 1/4 SQ. X 2
13 5042945 1 SPACER, 1.13 X 2.00 X .19
14 5101022 1 PULLEY, CRANKSHAFT
15 5050407X8 1 KEY, 1/4" SQ. X 1"
16 5047033 1 SPACER, 1.13 X 1.75 X 1.03
17 809268 1 RAIN CAP (Not shown)
18 809218 1 AIR CLEANER ASSEMBLY, COMPLETE (Not shown)
19 841237 1 ELEMENT, AIR CLEANER, PRIMARY (Not shown)
20 841238 1 ELEMENT, AIR CLEANER, SECONDARY (Not shown)
21 5021500 1 CLAMP, VINYL
22 5048681 1 HOSE, OIL DRAIN
23 5025011X12 4 BOLT, 5/16-18 X 1-1/2" GD5 YZ
24 5025170 4 WASHER, 5/16 LOCK YZ
25 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE
26 5025391 1 NUT, 1/4-20 HEX NYLOCK FLANGE
27 5025188 4 WASHER, 5/16" INT. TOOTH LOCK
28 841570 1 MUFFLER
29 5025013X8 2 BOLT, 3/8-16 X 1 GD5 YZ
30 5100366 1 METRIC ADAPTER, M14-1.5" TO 3/8 NPTF
31 5025010X8 1 BOLT, 1/4-20 X 1", GD5
32 492932S 1 FILTER, OIL, BRIGGS & STRATTON (Not shown)
Footnotes
NOTE: * Purchase engine components directly from engine manufacturer dealer.
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
21
TP 400-7329-J-M2-SP
Page 22
Pump Drive Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
22
TP 400-7329-J-M2-SP
Page 23
Pump Drive Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5101023 2 PULLEY, SPLIT STEEL 5.632 OVER BALL
2 5022587 2 BUSHING, TAPERED HUB
3 5023254 2 KEY, 5MM SQ. W/ RADIUS
4 5101029 1 BELT, B SECTION, 69.1" EL
5 5025013X32 1 BOLT, 3/8-16 X 4 GD5 YZ
6 5402603D 1 WELD, IDLER, PUMP DRIVE - RED
7 5022157 2 BUSHING, BRASS, 1.25X1X1.25
8 5025305 1 WASHER, .41 X 1.75 X .14
9 5045135 1 SPACER, .39 X 1.00 X 2.55
10 5045090 1 SPACER, IDLER PIVOT
11 5101193 1 PULLEY, FLAT IDLER, 5" W/KOYO
12 5025013X18 1 BOLT, 3/8-16 X 2-1/4 GD5 YZ
13 5025394 3 NUT, 3/8-16 HEX NYLOCK FLANGE
14 5025013X24 1 BOLT, 3/8-16 X 3 GD5 YZ
15 5022847 1 SPRING, EXTENSION, SWIVEL END
16 5025010X8 4 BOLT, 1/4-20 X 1", GD5
17 5025128 1 NUT, 3/8-16 HEX SERRATED FLANGE
18 5025034 2 NUT, 3/8-16 HEX
19 5021811 1 EYE BOLT, 3/8-16 X 8", 1" EYE
20 5025156 1 WASHER, 3/8 SAE
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
23
TP 400-7329-J-M2-SP
Page 24
Motion Control Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
24
TP 400-7329-J-M2-SP
Page 25
Motion Control Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5101112 2 SPRING-COMP, .594 ID X 1.75 LG X .080 WR
2 5100940 2 DAMPENER, CONTROL,#(P6709/P3610)
3 5100941 4 BALL STUD, 5/16 X .50,# PC-477-2)
4 5025392 8 NUT, 5/16-18 HEX NYLOCK FLANGE
5 5021499 2 BEARING, FLANGE
6 5025327 4 BOLT, 3/8-16 X 1-1/4 SHCS
7 5025096 4 NUT, 3/8-16 HEX NYLON LOCK
8 5025127 12 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
9 5025011X10 8 BOLT, 5/16-18 X 1-1/4 GD5 YZ
10 5025055X14 2 BOLT, 5/16-18 X 1-3/4" GD5 TFL
11 5025155 8 WASHER, 5/16 SAE
12 5025011X9 2 BOLT, 5/16-18 X 1-1/8 GD5
13 5025013X8 2 BOLT, 3/8-16 X 1 GD5 YZ
14 5025394 6 NUT, 3/8-16 HEX NYLOCK FLANGE
15 5046420 2 ROD, HYDRO CONTROL
16 5025033 6 NUT, 5/16-24 HEX
17 5021146 1 BALL JOINT, 5/16-24, FEMALE
18 5020047 2 COLLAR, 5/16" SET
19 5023260 4 BUSHING, NYLON
20 5022645 2 SPRING, REVERSE RETURN
21 5025164 6 WASHER, 5/16" FENDER
22 5023212 2 NUT, 5/16-24 HEX, LH
23 5022628 2 BALL JOINT, 5/16-24, LH FEMALE
24 5021451 2 SWITCH, PLUNGER, N.O.
25 5025179X4 4 SCREW, #10-24 X 1/2 ROUND PHILLIPS
26 5025029 4 NUT, #10-24 HEX
27 5047004 2 MOUNT, CONTROL ARM
28 5025170 4 WASHER, 5/16 LOCK YZ
29 5025011X8 4 BOLT, 5/16-18 X 1 GD5 YZ
30 5025013X14 4 BOLT, 3/8-16 X 1-3/4 GD5
31 5400637D 1 WELD, HANDLE MOTION CONTROL RH - RED
32 5022068 2 GRIP, FOAM, 3/4 ID, 16 LONG
33 5021098 2 BEARING, BRONZE FLANGE, 3/4
34 5400636D 1 WELD, HANDLE MOTION CONTROL LH - RED
35 5402744D 1 WELD, CONTROL SHAFT, RH - RED
36 5402741D 1 WELD, CONTROL SHAFT, LH - RED
37 5025055X10 2 BOLT, 5/16-18 X 1-1/4 TFL
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
25
TP 400-7329-J-M2-SP
Page 26
Hydraulic Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
26
TP 400-7329-J-M2-SP
Page 27
Hydraulic Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5022634 4 ADAPTER, HYD.
2 5023338 4 FITTING, #8 JIC - #8 O-RING, 45 DEG.
3 5023267 2 ADAPTER, 90 DEG, 9/16-3/8 BARB
4 5022920 1 FITTING, TEE, 1/2 HOSE
5 5050860X6P5 1 HOSE, 3/8 PUSH-LOCK
6 5050860X27 1 HOSE, 3/8 PUSH-LOCK
7 5050933X21 1 HOSE, 5/8, PUSH-LOCK
8 5100017 1 CAP, HYDRAULIC
9 5061712 1 TANK, HYDRAULIC, ASSEMBLY
10 5021164 6 CLAMP, #10 HOSE, STAINLESS
11 5023268 5 CLAMP, HOSE
12 5100407 1 WHEEL MOTOR, 15IN3/REV - LH
13 5100410 1 WHEEL MOTOR, 15IN3/REV - RH
14 5022042X2 2 KEY, WOODRUFF (SV)
15 5022042X3 2 NUT, CASTLE 1-20
16 5100670 1 PUMP, HYDRO-GEAR, 12CC - LH
17 5100671 1 PUMP, HYDRO-GEAR, 12CC - RH
18 5025010X6 2 BOLT, 1/4-20 X 3/4 GD5 YZ
19 5025154 2 WASHER, 1/4 SAE
20 5025169 2 WASHER, 1/4 LOCK
21 5025013X10 4 BOLT, 3/8-16 X 1-1/4 GD5
22 5025128 4 NUT, 3/8-16 HEX SERRATED FLANGE
23 5100162 2 FAN SHROUD (NOT SHOWN)
24 5025203X16 2 PIN, COTTER, 1/8 X 2
25 5100019 4 HOSE ASSEMBLY (23")
26 5022364 1 FITTING, BRANCH TEE
27 5100678 2 FITTING, STRAIGHT, HYD #12618
28 5050933X11 1 HOSE, 5/8, PUSH-LOCK
29 5050933X15 1 HOSE, 5/8, PUSH-LOCK
30 5101046 1 FITTING, 45 DEG 1/2 NPT MALE - 5/8 HOSE
31 5025475 8 BOLT, 1/2-13 X 2-1/2, NYLON PATCH
32 5025330 8 NUT, 1/2-13 SQUARE
33 5050860X15 1 HOSE, 3/8 PUSH-LOCK
34 5100384X19 1 LOOM, CONVOLUTED SPLIT, 1" ID.
35 5021357 1 FILTER, HYDRAULIC
36 5021356 1 FILTER HEAD
37 5100161X1 2 FAN, HYD. PUMP (SV) (NOT SHOWN)
38 5023118 1 FITTING, ELBOW, 3/8" (SV)
39 5023120 1 GROMMET (SV)
40 5023119 1 GROMMET (SV)
41 5023121 1 FITTING, ELBOW, 5/8" (SV)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
27
TP 400-7329-J-M2-SP
Page 28
Hydraulic Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
28
TP 400-7329-J-M2-SP
Page 29
Hydraulic Group
PART NO. DESCRIPTIONREF NO. QTY.
42 5022922 1 CLAMP # 4 HOSE, STAINLESS
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
29
TP 400-7329-J-M2-SP
Page 30
Hydraulic Mount Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
30
TP 400-7329-J-M2-SP
Page 31
Hydraulic Mount Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5402768D 1 PLATE, HYDRAULIC TANK MOUNT - RED
2 5025391 4 NUT, 1/4-20 HEX NYLOCK FLANGE
3 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE
4 5025155 3 WASHER, 5/16 SAE
5 5025011X8 3 BOLT, 5/16-18 X 1 GD5 YZ
6 -- 1 TANK, HYDRAULIC (SEE HYDRAULIC GROUP)
7 5025154 4 WASHER, 1/4 SAE
8 5025010X6 4 BOLT, 1/4-20 X 3/4 GD5 YZ
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
31
TP 400-7329-J-M2-SP
Page 32
Parking Brake Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
32
TP 400-7329-J-M2-SP
Page 33
Parking Brake Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5101038 1 GRIP, FOAM, 3/4 ID X 6 X .187
2 5025164 2 WASHER, 5/16" FENDER
3 5021098 2 BEARING, BRONZE FLANGE, 3/4
4 5025013X6 4 BOLT, 3/8-16 X 3/4 GD5 YZ
5 5025394 6 NUT, 3/8-16 HEX NYLOCK FLANGE
6 5042134 2 SPACER, .32 X .75 X 1.06
7 5025011X14 2 BOLT, 5/16-18 X 1-3/4 GD5 YZ
8 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE
9 5025011X10 1 BOLT, 5/16-18 X 1-1/4 GD5 YZ
10 5025139 2 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
11 5047084D 2 LINK, BRAKE LOCK - RED
12 5023324 2 CABLE, PARKING BRAKE
13 5022182 1 SWITCH, PLUNGER, NO/NC SNAP-IN
14 5048719 2 SPRING-COMP, .75 X .162 X 2.5
15 5025155 2 WASHER, 5/16 SAE
16 5025045 2 NUT, 5/16-24 HEX NYLON LOCK
17 5020979 2 CLEVIS, 5/16-24, PLASTIC
18 5025033 2 NUT, 5/16-24 HEX
19 5021494 2 SPRING, COMPRESSION, 5-1/2"
20 5025213X8 2 PIN, CLEVIS, 5/16 X 1 YZ
21 5025211 2 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ
22 5025038 4 NUT, 1/2-13 HEX
23 5025056 4 NUT, 1/2-13 HEX NYLON LOCK
24 5100775 2 WHEEL HUB, COMPACT CALIPER (86720)
25 5100774 2 COMPACT CALIPER, AUSCO (86978)
26 5402775D 2 MOUNT, BRAKE CALIPER - RED
27 5402739D 1 WELD, BRAKE SHAFT - RED
28 5025017X32 4 BOLT, 1/2-13 X 4 GD5
29 5025013X16 2 BOLT, 3/8-16 X 2 GD5 YZ
30 5041930 2 SPACER, .38 X .50 X .27
31 5100896 2 SPACER, .390 X 1.00 X 1.00 - YZ
32 5025033 2 NUT, 5/16-24 HEX (72" Deck Model)
33 5021170 2 BALL JOINT (72" Deck Model)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
33
TP 400-7329-J-M2-SP
Page 34
Deck Lift Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
34
TP 400-7329-J-M2-SP
Page 35
Deck Lift Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5023174 4 CLEVIS, 1/2-20, STEEL
2 5023355 2 SPRING, DECK LIFT ASSIST
3 5100827 2 ROD, DECK LIFT, TWR
4 5025328X12 4 PIN, CLEVIS, 1/2 X 1 1/2, YZP
5 5025203X6 4 PIN, COTTER, 1/8" X 3/4
6 5025394 8 NUT, 3/8-16 HEX NYLOCK FLANGE
7 5025156 10 WASHER, 3/8 SAE
8 5025013X10 6 BOLT, 3/8-16 X 1-1/4 GD5
9 5021880 1 GRIP, FOAM
10 5061569D 1 PEDAL, FOOT - RED
11 5020639 1 SPRING, EXTENSION
12 5023498 1 PIN, HITCH, 1/2 X 2.00 OAL, YP
13 1715834 1 RUBBER, FOOT PEDAL
14 5402759D 1 WELD, ROD DECK LIFT - SNP RED
15 5402757D 1 WELD, DECK ADJUST LINK - SNP RED
16 5022434 1 BALL JOINT, 1/2-20, MALE
17 5025089 5 NUT, 1/2-20 HEX JAM
18 5402747D 1 WELD, DECK LIFT SHAFT - RED
19 5402766D 1 WELD, PIVOT, DECK LIFT, RH - RED
20 5402767D 1 WELD, PIVOT, DECK LIFT, LH - RED
21 5023343 4 BUSHING, 1.00 X 1.13 X 1.38, PLASTIC
22 5020095 4 GREASE FITTING, 1/4-28 STRAIGHT
23 5025013X12 2 BOLT, 3/8-16 X 1-1/2 GD5 YZ
24 5025128 2 NUT, 3/8-16 HEX SERRATED FLANGE
25 5025158 1 WASHER, 1/2 SAE
26 5025017X16 1 BOLT, 1/2-13 X 2 GD5 YZ
27 5100548 2 WASHER, .390 X 1.50 X .109, YZ
28 5025443 2 BOLT, 3/8-16 X 3/4, GD5, YZ WITH PATCH
29 5025396 1 NUT, 1/2-13 HEX NYLOCK FLANGE
30 5025011X6 2 BOLT, 5/16-18 X 3/4 GD5
31 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE
32 5025155 2 WASHER, 5/16 SAE
33 5100380 2 ADJUSTER, DECK HANGER (72" MODEL)
34 5010546 2 COLLAR, 3/8 SET (72" MODEL)
35 5023497 2 EYE BOLT, 3/8-16 X 5", 1 EYE (72" MODEL)
36 5025128 2 NUT, 3/8-16 HEX SERRATED FLANGE (72" MODEL)
37 5025394 2 NUT, 3/8-16 HEX NYLOCK FLANGE (72" MODEL)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
35
TP 400-7329-J-M2-SP
Page 36
Wheel & Tire Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
36
TP 400-7329-J-M2-SP
Page 37
Wheel & Tire Group
PART NO. DESCRIPTIONREF NO. QTY.
1 5023136 2 TIRE ASSY, 13 X 6.5 SILVER
2 5022577 2 TIRE, FRONT, 13 x 6.5 x 6 (SV)
3 5023136X1 2 WHEEL ASSEMBLY, for 13 x 6.5 x 6 Tires, Complete (SV)
4 5022631SX2 4 BEARING, TAPER ROLLER (SV)
5 5022631SX3 4 GREASE SEAL (SV)
6 5047103 4 ADAPTER, CASTER AXLE
7 5025017X72 2 BOLT, 1/2-13 X 9" GD5 YZ
8 5025396 2 NUT, 1/2-13 HEX NYLOCK FLANGE
9 5023365 2 TIRE ASSM, 24X12.00-12, SOLID
10 5023240X1 2 TIRE, REAR, 24 x 12 x 12 (SV)
11 5023364 2 WHEEL ASSEMBLY, 12 x 8.5 (SV)
12 5022215 10 BOLT, WHEEL LUG, 1/2" X 1-5/8
13 5025158 2 WASHER, 1/2" SAE
14 5023279 2 FLAT FREE TIRE ASSEMBLY, 13 X 6.5 - 6 (OPTIONAL SOLID URETHANE
TIRE ASSEMBLY; INCLUDES REF NOS. 4 & 5)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
37
TP 400-7329-J-M2-SP
Page 38
Decals - Brand
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
38
TP 400-7329-J-M2-SP
Page 39
Decals - Brand
PART NO. DESCRIPTIONREF NO. QTY.
1 5022813 1 DECAL, 61
2 5101283 1 DECAL, SNAPPER PRO, S200X
3 5101200 1 DECAL, SNAPPER PRO, FRONT
4 5101201 1 DECAL, SNAPPER PRO, HEAT SHIELD
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
39
TP 400-7329-J-M2-SP
Page 40
Decals - Safety & Information
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
40
TP 400-7329-J-M2-SP
Page 41
Decals - Safety & Information
PART NO. DESCRIPTIONREF NO. QTY.
1 5100097 1 DECAL, MAIN SAFETY
2 5100089 1 DECAL, DANGER, MOWER DISCHARGE
3 5100088 1 DECAL, DANGER, MOWER
4 5100708 1 DECAL, DANGER, FIRE
5 5100709 1 DECAL, DANGER, FIRE (SP)
6 5100134 2 DECAL, WARNING, PINCH POINT
7 1725941 1 DECAL, CZT HYDRO RELEASE (LOCATED UNDER SEAT)
8 5101063 1 DECAL, BELT & BLADE, SNAPPER PRO 61/72 (LOCATED UNDER SEAT)
9 5100342 1 DECAL, FUEL VALVE
10 5061724 1 DECAL-HEIGHT CITATION
11 5100280 1 DECAL, THROTTLE CONTROL
12 5048970 1 DECAL, IGNITION SWITCH
13 5100957 1 DECAL, OIL RESEVOIR
14 5046503 1 DECAL, FUSE LOCATION
15 5100405 1 DECAL, WARNING, ROLL BAR (SV)
16 5100406 1 DECAL, WARNING, ROLL BAR, SP (SV)
17 5100403 1 DECAL, WARNING, ROLL BAR (SV)
18 5100404 1 DECAL, WARNING, ROLL BAR, SP (SV)
19 5100683 2 DECAL, WARNING, ROLL BAR
20 5100684 2 DECAL, WARNING, ROLL BAR, SP
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
41
TP 400-7329-J-M2-SP
Page 42
72" Mower Deck - Housing, Covers, and Spindles
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
42
TP 400-7329-J-M2-SP
Page 43
72" Mower Deck - Housing, Covers, and Spindles
PART NO. DESCRIPTIONREF NO. QTY.
1 5061288D 1 61" / 72" RUBBER CHUTE ASSEMBLY, Complete (Includes Ref No. 2 - 6)
2 5025394 3 NUT, 3/8-16 HEX NYLOCK FLANGE
3 5061293D 1 WELD, FRAME, CHUTE, 61 / 72 - RED
4 5100843 1 CHUTE, DISCHARGE, RUBBER, 61 / 72
5 5402360D 1 SUPPORT, DISCHARGE CHUTE, 61 / 72 - RED
6 5025013X10 3 BOLT, 3/8-16 X 1-1/4 GD5
7 5025045 2 NUT, 5/16-24 HEX NYLON LOCK
8 5061300 1 ROD MOUNT, CHUTE
9 5025392 1 NUT, 5/16-18 HEX NYLOCK FLANGE
10 5025411 7 BOLT, 5/16-18 X 3/4" FLANGE
11 5401136D 1 GUARD 72" - RH - RED
12 5403378D 1 GUARD 72" - LH - RED
13 5600151 1 DECK SHELL W/ DECALS (SV) (Includes safety decals.)
14 5022308 6 BODY CLIP, 5/16-18 X 1/2" DEEP
15 5025292 2 WASHER, 5/16 GR.9 FLAT
16 5025320X14 3 BOLT, 5/8-11 X 1-3/4" GD8
17 5025394 18 NUT, 3/8-16 HEX NYLOCK FLANGE
18 5100993 3 ASSM, SPINDLE, BOTTOM MOUNT
19 5025390X8 18 BOLT, 3/8-16 X 1", FLANGE
20 5022476S 1 BLADE, 25" (SET OF 3)
21 5025477 3 WASHER, 5/8" GRADE 8, YZ
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
43
TP 400-7329-J-M2-SP
Page 44
72" Mower Deck - Pulleys, Belt, and Idler Arm
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
44
TP 400-7329-J-M2-SP
Page 45
72" Mower Deck - Pulleys, Belt, and Idler Arm
PART NO. DESCRIPTIONREF NO. QTY.
1 5045023 3 SPACER, .52 X 1.00 X .44
2 5021976 4 PULLEY, IDLER 6-3/4"
3 5045019D 1 WELD, IDLER ARM - RED
4 5025396 5 NUT, 1/2-13 HEX NYLOCK FLANGE
5 5101103 4 SHIELD, PULLEY BEARING
6 5101171 3 PULLEY, 7.15 OD X 25MM BORE (BC72)
7 5025046 3 NUT, 3/8-16, HEX TOP LOCK
8 5022399 1 BELT, # 7-6212
9 5025150 3 WASHER, 1/2 USS
10 5101005 1 SAFETY WALK, 4.00 X 7.50
11 5025017X28 1 BOLT, 1/2-13 X 3-1/2 GD5
12 5020095 1 GREASE FITTING, 1/4-28 STR
13 5022726 3 KEY 1/4 SQ X 1-1/2 LONG
14 5025017X22 3 BOLT, 1/2-13 X 2-3/4" GD5
15 5025405 3 NUT, 3/4-16 HEX
16 5046434B 3 WELD, MOUNT, IDLER - RED
17 5025017X36 1 BOLT, 1/2-13 X 4-1/2 GD5
18 5045022 1 SPACER, .52 X 1.00 X 3.50
19 5021541 2 BUSHING, FLANGE
20 5023340 1 SPRING, EXTENSION, SWIVEL END
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
45
TP 400-7329-J-M2-SP
Page 46
72" Mower Deck - Rollers & Casters
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
46
TP 400-7329-J-M2-SP
Page 47
72" Mower Deck - Rollers & Casters
PART NO. DESCRIPTIONREF NO. QTY.
1 5025392 1 NUT, 5/16-18 HEX NYLOCK FLANGE
2 5020785 1 ROLLER, DECK
3 5041655D 1 WELD, BRACKET, ROLLER PIN
4 5025013X48 2 BOLT, 3/8-16 X 6 GD5 YZ
5 5025411 1 BOLT, 5/16-18 X 3/4 FLANGE
6 5025394 2 NUT, 3/8-16 HEX NYLOCK FLANGE
7 5025440 4 WASHER, 1/2 GD9 YZ
8 5046586 2 SPACER, .38 X .50 X 5.06
9 1714760 4 WHEEL - 2.00 WIDE 3.92 DIA 0.531ID POLY
10 5025156 2 WASHER, 3/8 SAE
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
2007
47
TP 400-7329-J-M2-SP
Page 48
61" Mower Deck - Hanger Chains
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
48
TP 400-7329-J-M2-SP
Page 49
61" Mower Deck - Hanger Chains
PART NO. DESCRIPTIONREF NO. QTY.
1 5025100 8 NUT, 3/8-16 HEX SIDE LOCK
2 5025128 10 NUT, 3/8-16 HEX SERRATED FLANGE
3 5025156 12 WASHER, 3/8 SAE
4 5025013X14 6 BOLT, 3/8-16 X 1-3/4 GD5
5 5047503 2 HANGER, FRONT DECK - 2 LINK
6 5025038 2 NUT, 1/2-13 HEX
7 5025158 2 WASHER, 1/2 SAE
8 5025396 2 NUT, 1/2-13 HEX NYLOCK FLANGE
9 5050878X3 4 CHAIN, 5/16 GD30, 3 LINKS
10 5025100 4 NUT, 3/8-16 HEX SIDE LOCK
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
49
TP 400-7329-J-M2-SP
Page 50
61" Mower Deck - Housing, Covers, Spindles & Blades (S/N: 2012617338 & Below)
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
50
TP 400-7329-J-M2-SP
Page 51
61" Mower Deck - Housing, Covers, Spindles & Blades (S/N: 2012617338 & Below)
PART NO. DESCRIPTIONREF NO. QTY.
1 5402736D 1 WELD, MOWER DECK, 61, SNP 2561 - RED
2 5401344D 1 PLATE, DEFLECTOR - RED
3 5600131 1 CHUTE, DISCHARGE, RUBBER, 61/72
4 5061293D 1 WELD, FRAME, CHUTE, 61 - RED
5 5402360D 1 SUPPORT, DISCHARGE CHUTE, 61/72 - RED
6 5025394 3 NUT, 3/8-16 HEX NYLOCK FLANGE
7 5025013X12 3 BOLT, 3/8-16 X 1-1/2 GD5 YZ
8 5025045 2 NUT, 5/16-24 HEX NYLON LOCK
9 5061300 1 ROD MOUNT, CHUTE 61"
10 5400791D 1 GUARD, 61, RH - RED
11 5400792D 1 GUARD, 61, LH - RED
12 5025392 15 NUT, 5/16-18 HEX NYLOCK FLANGE
13 5025411 1 BOLT, 5/16-18 X 3/4 FLANGE
14 5025159 3 WASHER, 5/8 USS
15 5022308 6 BODY CLIP, 5/16-18 X 1/2 DEEP
16 5101005 1 SAFETY WALK, 9.75 X 6.00
17 5025011X6 2 BOLT, 5/16-18 X 3/4 GD5
18 5061095 3 ASSM, SPINDLE, LOW PROFILE (INCLUDES REF NOS 23 - 31)
19 5023156 12 BOLT, 5/16-18 X 1 1/4 FLANGE
20 5020842S 1 BLADE, 21" (SET OF 3)
21 5025320X14 3 BOLT, 5/8-11 X 1-3/4" GD8
22 5025155 10 WASHER, 5/16 SAE
23 5023329 3 GREASE FITTING (SV)
24 5025405 3 NUT, 3/4-16 HEX (SV)
25 5025406 3 WASHER, 3/4 BELLEVILLE(SV)
26 5049793 6 TRASH SHIELD (SV)
27 5023330 6 BEARING (SV)
28 5023296 3 RELIEF VALVE (SV)
29 5061097 3 SPINDLE HOUSING (SV)
30 5061099 3 SPACER, 1.00 X 1.25 X 1.75 (SV)
31 5061098 3 SPINDLE SHAFT (SV)
32 5600131 1 KIT, DISCHARGE CHUTE, 61/72, SNP PRO (SV) (INCLUDES REF NOS 3 - 7)
33 5025011X8 6 BOLT, 5/16-18 X 1 GD5 YZ
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
51
TP 400-7329-J-M2-SP
Page 52
61" Mower Deck - Housing, Covers, Spindles & Blades (S/N: 2012617339 & Above)
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
52
TP 400-7329-J-M2-SP
Page 53
61" Mower Deck - Housing, Covers, Spindles & Blades (S/N: 2012617339 & Above)
PART NO. DESCRIPTIONREF NO. QTY.
1 5600135 1 DECK SHELL W/DECALS, 61" SIDE DISCHARGE (Includes Safety Decals)
2 5061288D 1 61" RUBBER CHUTE ASSEMBLY, Complete (Includes Ref No. 3 - 7)
3 5100843 1 CHUTE, DISCHARGE, RUBBER, 61/72"
4 5061293D 1 WELD, FRAME, CHUTE, 61
5 5402360D 1 SUPPORT, DISCHARGE CHUTE, 61 - RED
6 5025394 21 NUT, 3/8-16 HEX NYLOCK FLANGE
7 5025013X8 18 BOLT, 3/8-16 X 1 GD5 YZ
8 5025045 2 NUT, 5/16-24 HEX NYLON LOCK
9 5061300 1 ROD MOUNT, CHUTE 61"
10 5400791D 1 GUARD, 61", RH
11 5400792D 1 GUARD, 61" - LH
12 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE
13 5025411 1 BOLT, 5/16-18 X 3/4" FLANGE
14 5025477 3 WASHER, 5/8" GRADE 8, YZ
15 5022308 6 BODY CLIP, 5/16-18 X 1/2" DEEP
16 5101005 1 SAFETY WALK, 9.75 X 6.00
17 5025011X6 8 BOLT, 5/16-18 X 3/4" GD5
18 5100993 3 ASSM, SPINDLE, CAST IRON (INCLUDES REF NOS 24 - 30)
19 5025013X12 3 BOLT, 3/8-16 X 1-1/2 GD5 YZ
20 5020842S 1 BLADE, 21" (SET OF 3)
21 5025320X14 3 BOLT, 5/8-11 X 1-3/4" GD8
22 5025155 2 WASHER, 5/16 SAE
23 5401344D 1 PLATE, DEFLECTOR
24 5023329 3 FITTING, 1/8 NPT STR, SHORT (SV)
25 5049793 6 SHIELD, TRASH (SV)
26 5023330 6 BEARING, .98 X 2.44 X .67 (SV)
27 5023296 3 FITTING, RELIEF, 1 - 5 PSI (SV)
28 5101048 3 HOUSING, SPINDLE, BOTTOM MOUNT SM (SV)
29 5061099 3 SPACER, 1.00 X 1.25 X 1.75 (SV)
30 5061098 3 SHAFT, SPINDLE (SV)
31 5025405 3 NUT, 3/4-16 HEX (SV)
32 5025406 3 WASHER, 3/4 BELLEVILLE (SV)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
53
TP 400-7329-J-M2-SP
Page 54
61" Mower Deck - Pulleys, Belts & Idler Arm
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
54
TP 400-7329-J-M2-SP
Page 55
61" Mower Deck - Pulleys, Belts & Idler Arm
PART NO. DESCRIPTIONREF NO. QTY.
1 5025017X24 3 BOLT, 1/2-13 X 3 GD5
2 5025158 1 WASHER, 1/2 SAE
3 5025017X28 1 BOLT, 1/2-13 X 3-1/2 GD5
4 5025396 5 NUT, 1/2-13 HEX NYLOCK FLANGE
5 5023340 1 SPRING, EXTENSION, SWIVEL END
6 5025017X36 1 BOLT, 1/2-13 X 4-1/2 GD5
7 5025150 2 WASHER, 1/2 USS
8 5025038 1 NUT, 1/2-13 HEX
9 5020095 1 GREASE FITTING, 1/4-28 STRAIGHT
10 5025406 3 WASHER, 3/4 BELLEVILLE
11 5025405 3 NUT, 3/4-16 HEX
12 5021976 3 PULLEY, IDLER 6-3/4
13 5050407X5 3 KEY, 1/4 SQ. X 1-1/4
14 5044609 2 SPACER, .52 X 1.00 X .38
15 5046434D 2 WELD, MOUNT, IDLER - RED
16 5100893 1 BELT, HB Sec. 167.88 EL
17 5401621D 1 WELD, IDLER ARM - RED
18 5021541 2 BUSHING, FLANGE
19 5045022 1 SPACER, .52 X 1.00 X 3.50
20 5100444 3 PULLEY, SPIN, 6.5 OD X 25MM,
21 5101103 3 SHIELD, PULLEY BEARING
22 5010580 1 COLLAR, 1/2" SET
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
55
TP 400-7329-J-M2-SP
Page 56
61" Mower Deck - Roller Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
56
TP 400-7329-J-M2-SP
Page 57
61" Mower Deck - Roller Group
PART NO. DESCRIPTIONREF NO. QTY.
1 1714760 6 GAUGE WHEEL
2 5025440 4 WASHER, 1/2 GD9 YZ
3 5046586 2 SPACER, .38 X .50 X 5.06
4 5025394 4 NUT, 3/8-16 HEX NYLOCK FLANGE
5 5025013X24 2 BOLT, 3/8-16 X 3 GD5 YZ
6 5025156 4 WASHER, 3/8 SAE
7 5041931 4 SPACER, .38 X .50 X 1.25
8 5047027 2 SPACER, .51 X .75 X .56
9 5025013X48 2 BOLT, 3/8-16 X 6 GD5 YZ
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
57
TP 400-7329-J-M2-SP
Page 58
61" & 72" Mower Deck - Rear Mount Bars
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
58
TP 400-7329-J-M2-SP
Page 59
61" & 72" Mower Deck - Rear Mount Bars
PART NO. DESCRIPTIONREF NO. QTY.
1 5061325D 2 WELD, PUSHER BAR - RED
2 5020095 2 GREASE FITTING, 1/4-28 STRAIGHT
3 5025093 2 NUT, 3/4-16 HEX JAM
4 5025265X28 2 BOLT, 3/4-16 X 3-1/2" YZ GD5 (61" MODEL ONLY)
5 5025160 2 WASHER, 3/4 SAE
6 5022111 4 SEAL, 3/4" ROD END
7 5022039 2 BALL JOINT, 3/4-16, MALE
8 5046093 2 SPACER, .75 X 1.50 X 1.00 (61" MODEL ONLY)
9 5025284 2 NUT, 3/4-16 HEX NYLON LOCK
10 5045037D 2 WELD, DECK MOUNT SHAFT - RED
11 5025013X8 2 BOLT, 3/8-16 X 1 GD5 YZ
12 5025394 2 NUT, 3/8-16 HEX NYLOCK FLANGE
13 5023344 8 BUSHING, .75 X 1.00 X 1.00, PLASTIC
14 5025156 2 WASHER, 3/8 SAE
15 5025265X24 2 BOLT, 3/4-16 X 3" YZ GD5 (72" MODEL ONLY)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900692
5900695
5900693
5900664
© Copyright Briggs and Stratton. All Rights Reserved.
2007
59
TP 400-7329-J-M2-SP
Page 60
Electrical Schematic - Charging Circuit - Kawasaki & Kohler Models
5300864C
The above parts group applies to the following Mfg. Nos.:
5900664
5900692
5900695
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
60
TP 400-7329-J-M2-SP
Page 61
Electrical Schematic - Cranking Circuit - Kawasaki & Kohler Models
5300864R
The above parts group applies to the following Mfg. Nos.:
5900664
5900692
5900695
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
61
TP 400-7329-J-M2-SP
Page 62
Electrical Schematic - Ignition Grounding Circuit / Operator Presence - Kawasaki & Kohler
Models
5300864I
The above parts group applies to the following Mfg. Nos.:
5900664
5900692
5900695
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
62
TP 400-7329-J-M2-SP
Page 63
Electrical Schematic - PTO Clutch Circuit - Kawasaki & Kohler Models
5300864P
The above parts group applies to the following Mfg. Nos.:
5900664
5900692
5900695
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
63
TP 400-7329-J-M2-SP
Page 64
Electrical Schematic - Charging Circuit - Briggs & Stratton Model
329esbc0
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
64
TP 400-7329-J-M2-SP
Page 65
Electrical Schematic - Cranking Circuit - Briggs & Stratton Model
329esbr0
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
65
TP 400-7329-J-M2-SP
Page 66
Electrical Schematic - Ignition Grounding Circuit / Operator Presence - Briggs & Stratton
Model
329esbi0
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
66
TP 400-7329-J-M2-SP
Page 67
Electrical Schematic - PTO Clutch Circuit - Briggs & Stratton Model
329esbp0
The above parts group applies to the following Mfg. Nos.:
5900693
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
67
TP 400-7329-J-M2-SP
Page 68
Page 69
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
20
27
31
66
76
2.1
2.3
3.1
3.5
7.6 8 10.9 12 16.3
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420 571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
Page 70
Parts
Manual
S200X Series
Zero-Turn Riding Mower
IT IS THE POLICY OF FERRIS INDUSTRIES TO IMPROVE ITS PRODUCTS WHENEVER IT
IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE
CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED
Briggs and Stratton Yard Power Products Group
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
www.ferrisindustries.com
© Copyright Briggs and Stratton Corporation
All Rights Reserved. Printed In USA.
2007
Loading...