Parts Manual fo
20" STEEL DECK 5 HP PUSH & PROPELLED
WALK BEHIND MOWERS
SERIES 0
PUSH MODELS PROPELLED
MODELS
NR20500 NRP20500
R20500 RP20500
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 1,
McDonough, GA, 30253 U.S.A.
9/22/2005
Manual No. 7006055
TP 400-5104-1-WB-N
PAGE GROUP
4
6
8
10
12
16
18
Handles & Controls (Push Models)
Handles & Controls (Self-Propelled Models)
Engine, Cutting Deck, Blade, Interlock (Push Models)
Engine, Cutting Deck, Blade, Interlock (Self-Propelled Models)
Wheels, Guards, Axle, Transmission
Side Chute, Adapter
Decals
Table Of Content
SERIES 0
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
3
TP 400-5104-1-WB-N
Handles & Controls (Push Models)
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
4
SERIES 0
Handles & Controls (Push Models)
Part No Descri
1 7074384 1 HANDLE, Upper Was 33473
2 7036350 1 HANDLE, Middle
3 7046502 1 HANDLE, Lower (Left Hand) Was 38467
4 7035342 1 HANDLE, Lower (Right Hand) Was 38466
5 7017072 1 CONTROL, Blade
6 7033904 1 CLIP, Blade Control
7 7023765 1 CABLE, Blade Control
8 7014343 2 BUSHING
9 7023813 1 CLIP, Wiring Harness
10 7028481 1 CONTROL, Throttle
11 7090095 1 NUT, 1/4-28 Hex Was 91024
12 7090391 1 WASHER, 5/16 Internal Tooth Lock Was 91068
13 7023735 4 KNOB, 5/16-18 Thread
14 7091740 4 SCREW, 5/16-18 x 2" Curved Head Was 91189
15 7024211 1 DECAL, Blade Control
16 7090053 1 WASHER, 1/4 Internal Tooth Lock Was 91023
17 7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage Was 91026
18 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 91070
19 7090112 1 SCREW, 1/4-28 x 2" Hex Head Cap
tionItem Qt
Note
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
5
TP 400-5104-1-WB-N
Handles & Controls (Self-Propelled Models)
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
6
SERIES 0
Handles & Controls (Self-Propelled Models)
Part No Descri
1 7074384 1 HANDLE, Upper Was 34688
2 7024211 1 DECAL, Blade Control
3 7017072 1 CONTROL, Blade
4 7023792 1 PIN, .250 Dia. x 1 1/2"
5 7014307 1 GRIP, Wheel Drive
6 7041728 1 HANDLE, Wheel Drive
7 7014343 4 BUSHING
8 7033904 1 CLIP, Blade Control
9 7090112 2 SCREW, 1/4-28 x 2" Hex Head Cap, Grade 5
10 7091020 1 NUT, 1/4 Push
11 7029699 1 CONTROL, Throttle
12 7090053 2 WASHER, 1/4 Internal Tooth Lock Was 91023
13 7090095 2 NUT, 1/4-28 Hex Was 91024
14 7029631 1 CABLE, Wheel Drive
15 7016544 2 PLUG
16 7091601 1 NUT, 5/16-18 Hex Flange Lock Was 91070
17 7091190 3 SCREW, 5/16-18 x 1 1/2" Short Neck Curved Head
18 7029697 1 CABLE, Blade Control
19 7023813 3 CLIP, Wiring Harness
20 7029621 2 HANDLE, Middle
21 7091533 1 SCREW, 5/16-18 x 1 3/4" Short Neck Curved Head
22 7034620 1 BRACE, Handle/Bracket
23 7034330 1 BRACKET, Handle/Wheel (Right Hand)
24 7091542 12 SCREW, 5/16-18 x 1/2" Pan Head, Torx
25 7034361 1 BRACKET, Handle/Wheel (Left Hand)
26 7090951 3 NUT, 5/16-18 Large Flange Lock
27 7091673 1 WASHER, Flat, .125 x .252 I.D. x .625 O.D.
tionItem Qt
Note
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
7
TP 400-5104-1-WB-N