Snapper MRP216518B User Manual

Parts Manual fo

r

21" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

PUSH MODELS PROPELLED

MODELS

MR216518B EMRP216518B

MRP216518B

COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

Revision 1,

McDonough, GA, 30253 U.S.A.

8/2/2005

Manual No. 7006138

TP 400-5043-1-WB-N

s

PAGE GROUP

4

8
10
12
14
18
20
22
24
26
28
30
32
34

HANDLES AND CONTROLS
CUTTING DECK, BLADE
FRONT WHEEL BRACKET
REAR WHEEL BRACKETS, LATCHES
DRIVE SYSTEM SELF-PROPELLED
TRANSMISSION (DIFFERENTIAL)
FRONT WHEELS
REAR WHEELS
SIDE CHUTE, ADAPTER
GRASS BAG ACCESSORY
DECALS
THATCHERIZER ASSEMBLY
SNAPPERIZER ACCESSORY
RECYCLING KITS ACCESSORY

Table Of Content

"MR" SERIES 18

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

3

TP 400-5043-1-WB-N

HANDLES AND CONTROLS

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

4

"MR" SERIES 18

HANDLES AND CONTROLS

p

y

Part No Descri

1 7074411 1 HANDLE, Upper used on All
2 7074156 1 HANDLE, Middle used on All
3 7033985 1 HANDLE, Lower LH (Adjustable) used on All
4 7033986 1 HANDLE, Lower RH (Adjustable) used on All
5 7074418 1 BAIL, OPC Control used on All
6 7034872 1 CLIP, Zone Control used on All
7 7034608 1 CABLE, Blade Control (46.75/5.38 length) used on All
8 7074473 1 HANDLE, Wheel Drive used on Self Propelled

9 7028407 1 GRIP,Wheel Drive Handle (International Symbol) used on Self Propelled
10 7034604 1 CABLE, Clutch Pull (Z-bend, 41.25” long) used on Self Propelled
11 7012121 1 COVER, Vinyl used on Self Propelled
12 7012122 1 SPRING, Clutch used on Self Propelled
13 7038478 1 SECTOR, Speed '77VP used on Self Propelled
14 7024641 2 WIRE TIE, 1.29” Long (Black) used on All
15 7012093 1 SPRING, Speed Control used on Self Propelled
16 7090188 1 WASHER, 3/8” Flat used on Self Propelled
17 7023801 1 GRIP, Speed Control Handle used on Self Propelled
18 7032830 1 ANCHOR, Lever used on Self Propelled
19 7032408 1 GUIDE, Lower V-Belt used on Self Propelled

20A 7023790 1 ROD, Transfer used on Self Propelled
20B 7051698 1 ASSY., Transfer Rod (Incl. indented items below) used on EMRP216518B

-- 7015752 1 LINK, Transfer used on EMRP216518B

-- 7015753 1 BALL JOINT, 1/4-28 used on EMRP216518B

-- 7090095 1 NUT, 1/4-28 Hex used on EMRP216518B
21 7010937 1 CLIP, Transfer Rod 1/4” used on Self Propelled
22 7090895 1 T-NUT, 5/16-18 used on Self Propelled
23 7012114 1 BUSHING, Differential used on Self Propelled
24 7090595 2 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
25 7090238 1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
26 7090799 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was 91026 (used on All)
27 7091601 8 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 91070 (used on All)
28 7091606 1 NUT, 5/16-24 Hex Center Lock GR5 Was 91074 (used on Self

29 7023813 1 CLIP, Cable/Wiring used on All
30 7091740 4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 Was 91189 (used on All)
31 7035744 4 KNOB, 5/16-18 Wing (Black) used on All
32 7079577 3 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 qty 1 on push model
33 7090053 3 WASHER, 1/4” Internal Tooth Lock Was 91023 (qty 2 on push)

tionItem Qt

Note

Propelled)

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

5

TP 400-5043-1-WB-N

HANDLES AND CONTROLS

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

6

"MR" SERIES 18

HANDLES AND CONTROLS

p

y

Part No Descri

34 7091576 3 NUT, 1/4-20 Hex Was 91100 (used on All)
35 7012080 1 CABLE-TIE, 7” used on All
36 7014343 4 BUSHING, .27 x .35 x .4 Flange used on Self Propelled
37 7023792 1 PIN, Clutch Handle used on Self Propelled
38 7091020 1 PUSH-NUT, 1/4” (for handle pin) used on Self Propelled
39 7029782 1 DECAL, OPC Bail (International Symbol) used on All; see Decal page
40 7028488 1 GUIDE, Rope (1/4-20 thread) used on All
41 7022458 1 FOAM GRIP, 15”, 21 SP used on All
42 7024087 1 DECAL, Speed Sector used on MRP216518B; see

43 7029783 1 DECAL, Speed Sector Int'l Symbol used on EMRP216518B; see

44 7076978 1 NUT, 1/4-28 Hex GR5 or B used on All
45 7090391 4 WASHER, 5/16” Internal Tooth Lock used on All
46 7026219 1 CLAMP, 7/8” Double Cable used on Self Propelled
47 7029911 1 LEVER, Speed Control used on Self Propelled

tionItem Qt

Note

Decal page

Decal page

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

7

TP 400-5043-1-WB-N

CUTTING DECK, BLADE

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

8

"MR" SERIES 18

CUTTING DECK, BLADE

p

y

Part No Descri

1 7057884 1 * ASSEMBLY, M Series Push 21” Deck Was 57784 (Used on

-- 7057884 1 * ASSEMBLY, Non-Adjustable Air, 21” Deck Was 57667 (Used on

2 7091601 10 NUT, 5/16-18 Hex Flange Lock, GR5 Was 90585
3 7090731 9 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5 Was 92061
4 7091169 1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
5 7090324 3 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
6 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR5
7 7012063 2 WASHER, Cone
8 7026407 1 BLADE, 21” Ninja

9 7015626 1 HUB, Blade Drive 25mm
10 7091214 1 KEY, Hi-Pro #HP506 (Briggs engine)
11 7090201 1 SCREW, 5/16-18 x 5/16” Hex Socket Head
12 7015780 1 PULLEY, Engine Drive (25mm x 2-1/8” O.D.)
13 7090702 1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock
14 7091508 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 90001
15 7011791 1 RETAINER, 5/16” Bolt
16 7090951 2 NUT, 5/16-18 Hex Large Flange Center Lock
17 7091122 6 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
18 7031961 1 WASHER, 7/16” Flat
19 7073462 1 DECAL, Caution, International Symbols used on Euro models
20 7046780 2 HOLE PLUG, Polyethylene
21 7074568 1 COVER, Belt used on MRP216518B &

22 7044770 3 SPACER, .06 Blade Hub
23 7041400 1 FENDER WELDMENT used on Euro models
24 7046471 3 PLUG, 5/16” Square Hole used on Push models; (only one

25 7045264 3 PLUG, 5/16” Round Hole qty. 3 on Push, qty. 2 on Self-

26 7013320 1 BUSHING, .388 x .625 x 1.62 used on Euro models
27 7031961 2 WASHER, 7/16” Flat used on Euro models
28 7033863 1 COVER, Belt- IP21S used on Euro models
29 7090534 1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models

-- -- 1 *ENGINE, 6.5 B&S Quantum model 123K02 type 0119 trim E1

-- -- 1 *ENGINE, B&S Euro 6.5HP model 123K02 type 0125 trim E1

tionItem Qt

Note

MR216518B)

MRP216518B and
EMRP216518B)

EMRP216518B

shown)

Propelled (only one shown)

Footnotes:

Note* includes painted deck and wheel brackets
Note* Purchase engine parts from engine manufacturer dealer.

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

9

TP 400-5043-1-WB-N

FRONT WHEEL BRACKET

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

10

"MR" SERIES 18

FRONT WHEEL BRACKET

p

y

Part No Descri

1 7051886 1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A &

-- 7051885 1 ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B &

2 7015761 2 BOLT, 5/16-18 Hex Washer Face Shoulder

3 7012325 2 LATCH, Height

4 7027702 2 GRIP, Height Latch
5A 7031017 1 WHEEL ARM, R.H. Front (Round Hole)
5B 7031016 1 WHEEL ARM, L.H. Front (Square Hole) not shown

6 7011791 2 RETAINER, 5/16” Bolt (Black)

7 7091601 2 NUT, 5/16-18 Hex Flange Lock GR5 Was 91070

8 7074702 1 WELDMENT, Front Wheel Bracket

9 7021119 1 AXLE, 21” qty. 2 on Push models

tionItem Qt

Note

6)

6)

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

11

TP 400-5043-1-WB-N

REAR WHEEL BRACKETS, LATCHES

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

12

"MR" SERIES 18

REAR WHEEL BRACKETS, LATCHES

p

y

Part No Descri

1 7012312 2 BALL BEARING, 9/16” I.D.

-- 7046983 2 BALL BEARING, 9/16” I.D. (Commercial) Was 18767

2 7091012 6 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx head)

3 7035717 2 LATCH, Height Adjusting (Long)

4 7091576 1 NUT, 1/4-20 Hex Was 90063

5 7091601 6 NUT, 5/16-18 Hex Flange Lock GR5 Was 91070

6 7054228 1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.

7 7054229 1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.

8 7054230 1 ASSEMBLY, Wheel Arm (Right Rear) Was 54230 (Self-Propelled

-- 7054246 1 ASSEMBLY, Wheel Arm, Right Rear Was 54224 (Commercial

9 7054247 1 ASSEMBLY, Wheel Arm (Left Rear) Was 54231 (Self-Propelled

-- 7054247 1 ASSEMBLY, Wheel Arm, Left Rear Was 54225 (Commercial

10 7033776 1 WHEEL ARM, R.H. Rear used on Push models
11 7033775 1 WHEEL ARM, L.H. Rear used on Push models
12 7032722 1 ARM, Wheel, Right Rear used on Self-Propelled models
13 7032723 1 ARM, Wheel, Left Rear used on Self-Propelled models
14 7011078 2 BOLT, 5/16-18 x 1” Shoulder
15 7011791 2 RETAINER, 5/16” Bolt
16 7027702 2 GRIP, Height Latch
17 7033494 1 BRACKET, Right Rear Wheel
18 7033495 1 BRACKET, Left Rear Wheel
19 7021119 1 AXLE, 21” Rear axle on Push Models;

20 7035741 1 GUARD, Rear Foot used on Push models
21 7029008 1 GUARD, Rear Foot used on Self-Propelled models

-- 7042918 1 FOOT GUARD, P21 Euro Long used on Euro Self-Propelled

22 7023791 1 RING, Split (Black) used on Self-Propelled models
23 7012616 1 SUPPORT, Foot Guard used on Self-Propelled models
24 7091604 1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 Was 90005 (used on Self-

25 7090053 1 WASHER, 1/4” Internal Tooth Lock Was 91023

tionItem Qt

Note

items 3, 10, 14, 15 & 16)

items 3, 11, 14, 15 & 16)

models)(Incl. 1, 2, 3, 12, 14, 15
& 16)

Models)(Includes 1B, 2, 3, 12,
14, 15, 16)

Models)(Includes 1, 2, 3, 13, 14,
15, & 16)

Models)(Includes 1B, 2, 3, 13,
14, 15, & 16)

Front axle on All Models

(except European)

models

Propelled models)

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

13

TP 400-5043-1-WB-N

DRIVE SYSTEM SELF-PROPELLED

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

14

"MR" SERIES 18

DRIVE SYSTEM SELF-PROPELLED

p

y

Part No Descri

1 7012354 1 BELT, Poly-Vee

2 7034179 1 LINK, Differential (Commercial)

-- 7051921 1 ASSEMBLY, Clutch Idler (includes items 3 thru 7)

3 7032832 1 ARM, Clutch Idler

4 7012124 1 PULLEY, Idler

5 7091025 1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5

6 7090303 1 NUT, 1/4-28 Hex Top Lock

7 7012117 2 BUSHING, 3/8” Plastic

8 7072284 1 SHAFT, Hex Drive

9 7024521 1 PULLEY, Poly-V, 2” O.D. Non-Commercial Models
10 7012316 1 WASHER, 3/8” Flat
11 7012126 1 SPRING, Idler, Torsion
12 7012111 1 STUD, Idler (3/8-24 thread)
13 7031873 1 HOLDER, Half
14 7028014 1 BALL BEARING, .38 I.D. Spherical O.D.
15 7011025 1 O-RING
16 7090289 1 NUT, 3/8-24 Hex Center Lock GR5 or B
17 7031809 1 HOLDER, Half
18 7010937 1 CLIP, Transfer Rod 1/4” also shown on HANDLES AND

19 7023790 1 ROD, Transfer also shown on HANDLES AND

-- 7051698 1 ASSY., Transfer Rod Euro; also shown on HANDLES

20 7046784 1 BELT, Engine Drive 3L (Stretch)

-- 7053225 1 ASSEMBLY, Driven Disc (Cantilever) used on Euro Self-Propelled

21 7035477 1 THRUST PLATE, Short
22 7010746 2 RING, 5/8” External Retaining used on Self-Propelled models
23 7026693 1 BALL BEARING, 3/4” I.D. used on Self-Propelled models
24 7010121 1 WASHER, 3/4” Shim
25 7032664 1 SHIELD, Hex Shaft
26 7015753 1 BALL JOINT, 1/4-28 also shown on HANDLES AND

27 7090095 1 NUT, 1/4-28 Hex also shown on HANDLES AND

28 7015752 1 LINK, Transfer also shown on HANDLES AND

29 7010121 1 WASHER, 3/4” Shim
30 7090390 3 WASHER, 3/8” Internal Tooth Lock
31 7090122 1 WASHER, 3/8” Flat
32 7091630 1 NUT, 3/8-24 Hex
33 7091511 1 NUT, 5/16-18 Hex, GR5 Was 90196
34 7090187 1 WASHER, 5/16” Split Lock

tionItem Qt

Note

CONTROLS page

CONTROLS page

AND CONTROLS page

models

CONTROLS page

CONTROLS page

CONTROLS page

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

15

TP 400-5043-1-WB-N

DRIVE SYSTEM SELF-PROPELLED

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

16

"MR" SERIES 18

DRIVE SYSTEM SELF-PROPELLED

p

y

Part No Descri

35 7090316 1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 91097
36 7032831 1 CONNECTOR, Transfer Rod
37 7091294 1 WASHER, .28 x .63 x .06 Flat used on Euro Self-Propelled

38 7017696 1 BUSHING
39 7029025 1 SPRING, Wheel Drive
40 7012125 1 GUIDE, Thrust Plate (3/8-24 thread)
41 7013847 1 RETAINER, 3/8” Bolt
42 7090799 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was 91026
43 7041855 1 DISC, Driven (Cantilever)

-- 7059462 1 ASSY, Deck Bracket (Includes items 44A & 45)

44A 7033774 1 BRACKET, Deck Was 31919 (Now 17696 +

44B 7057922 1 BRACKET, Deck, Painted Black Texture used on Euro Self-Propelled

45 7012117 2 BUSHING, 3/8” Plastic
46 7021758 1 SPACER used on Commercial models
47 7090534 1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
48 7090391 1 WASHER, 5/16” Internal Tooth Lock
49 7011724 1 WASHER, .44 x .78 x .025 Curved
50 7091597 1 PIN, 3/32 x 1/2” Cotter Was 90555
51 7091122 2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
52 7090731 3 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
53 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 91070
54 7012122 1 SPRING, Clutch
55 7090053 1 WASHER, 1/4” Internal Tooth Lock used on Euro Self-Propelled

56 7061275 -- KIT, Drive Disc Assembly (Includes Drive Disc and items

tionItem Qt

Note

models

33774)

models

models

32 & 38)

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

17

TP 400-5043-1-WB-N

TRANSMISSION (DIFFERENTIAL)

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

18

"MR" SERIES 18

TRANSMISSION (DIFFERENTIAL)

p

y

Part No Descri

-- 7053943 1 ASSY, Transmission- 1996 (Includes items 1 thru 30)

1 7092062 1 NUT, 5/16-24 Hex Lock

2 7092063 1 WASHER, Bellville

3 7019213 1 PULLEY, Poly-Vee Belt

4 7011724 2 WASHER, Spring

5 7053941 1 ASSY, Right Housing (Phantom) (Includes items 6, 7, 8, 9, 10 &

6 7029034 1 HOUSING, Right Side

7 7014155 3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5

8 7012314 1 SEAL, 5/8” Internal Diameter

9 7029035 1 BEARING, Tapered- (Differential Housing)
10 7073963 1 BALL BEARING, 7/16 I.D., 1/1/8” O.D.
11 7016544 1 PLUG, Transmission
12 7050767 1 GEAR, Input
13 7051932 1 ASSEMBLY, Short Axle
14 7012495 1 GEAR, Differential (46 tooth)
15 7031970 2 PLATE, 46T Gear
16 7031965 2 WASHER, Thrust, 3/4” I.D.
17 7090557 4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
18 7011774 1 GASKET, Housing
19 7090189 3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
20 7051903 1 BRACKET, Differential
21 7091825 4 SCREW, 1/4-20 x 1” Hex Washer Self-Tap Was 92064 (only 1 shown)
22 7012543 1 SPACER, Axle Gear
23 7051933 1 ASSEMBLY, Long Axle
24 7021115 4 GEAR, Pinion (12 tooth)
25 7012500 4 SPACER, Pinion Gear
26 7011110 4 SHAFT, Pinion
27 7090376 4 NUT, #10-32 Hex Nyloc
28 7053938 1 ASSY, Left Housing (Phantom) (Includes items 8, 9 & 29)
29 7029033 1 HOUSING, Left
30 7024442 3 GASKET, 5/8” O. D.

-- 7061017 * “OO” Grease (32 oz.)

tionItem Qt

Note

30)

Footnotes:

Note* Maximum capacity of transmission case is 4 oz. DO NOT OVERFILL Transmission!

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

19

TP 400-5043-1-WB-N

FRONT WHEELS

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

20

"MR" SERIES 18

FRONT WHEELS

p

y

Part No Descri

1 7029010 2 WHEEL, 8 x 1.75 Plastic

2 7017829 2 PLUG, Wheel

3 7090377 2 NUT, 7/16-20 Hex Center Lock Jam

4 7012309 2 BUSHING, Axle

5 7031961 6 WASHER, 7/16” Flat Qty. of (2) for Push; Qty. of (1)

tionItem Qt

Note

for Self-Propelled Models

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

21

TP 400-5043-1-WB-N

REAR WHEELS

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

22

"MR" SERIES 18

REAR WHEELS

p

y

Part No Descri

1 7074924 2 WHEEL, 10 x 1.75” Plastic (Push Models)

2 7029011 2 WHEEL, 10 x 1.75” Plastic (Self-Propelled Models)

3 7090377 2 NUT, 7/16-20 Hex Center Lock Jam

4 7012309 2 BUSHING, Axle

5 7031961 4 WASHER, 7/16” Flat

6 7017829 2 PLUG, Wheel

tionItem Qt

Note

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

23

TP 400-5043-1-WB-N

SIDE CHUTE, ADAPTER

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

24

"MR" SERIES 18

SIDE CHUTE, ADAPTER

p

y

Part No Descri

1 7051951 -- ASSEMBLY, Bag Adapter & Cover (Includes items 2 thru 9; used on

2 7016107 1 ADAPTER, Grass Bag

3 7019287 1 COVER, Bag Adapter

4 7023000 1 HINGE, Chute Cover

5 7091064 5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5

6 7090053 5 WASHER, 1/4” Internal Tooth Lock Was 91023

7 7091576 5 NUT, 1/4-20 Hex Was 91100

8 7032661 1 STOP, Cover

9 7023042 1 MOLDING, Trim

10A 7016050 1 ADAPTER, Grass Bag
10B 7058037 -- ASSEMBLY, Grass Bag Adapter (See Grass Bag Accessory

11 7024340 1 SPACER, .316 I.D. x .375 O.D. x .310 thick
12 7090951 1 NUT, 5/16-18 Hex Large Flange Center Lock
13 7011791 1 RETAINER, 5/16” Bolt
14 7091508 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 90001
15 7042965 1 CHUTE, Side
16 7090122 2 WASHER, 3/8" Flat Was 91514
17 7024085 2 WING-NUT, 5/16-18 Nyloc
18 7029149 1 COVER, 21” Deck

tionItem Qt

Note

European Models Only)

page)

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

25

TP 400-5043-1-WB-N

GRASS BAG ACCESSORY

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

26

"MR" SERIES 18

GRASS BAG ACCESSORY

p

y

Part No Descri

-- 7060791 -- KIT, Grass Bag Catcher (Includes items 1 thru 5)

1 7074734 1 GRASS BAG, Slider Type (Black)

2 7050711 1 ASSEMBLY, Slider

3 7042489 1 CONNECTOR, Grass Bag (weldment)

4 7019247 1 WIRE, Bag Adapter

5 7016050 1 ADAPTER, Bag

6 7058037 1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)

7 7047081 1 ADAPTER, Bag

8 7047082 1 BRACKET, Rope Pulley

9 7091984 1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
10 7012306 1 BUSHING, Flange
11 7024228 1 PULLEY, Plastic
12 7091601 1 NUT, 5/16-18 Hex Flange Lock GR5 Was 91070
13 7072107 2 WASHER, 15/32” Flat
14 7013860 4 RIVET, 3/16 x .344

tionItem Qt

Note

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

27

TP 400-5043-1-WB-N

DECALS

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

28

"MR" SERIES 18

DECALS

p

y

Part No Descri

1 7024087 1 DECAL, Speed Sector

2 7029783 1 DECAL, Speed Sector Int'l Symbol

3 7046720 1 DECAL, Chute/Deflector

4 7075619 1 DECAL, Ninja

5 7075618 1 DECAL, SNAPPER

6 7072921 1 DECAL, Warning (Deck)

7 7013010 1 DECAL, Danger, Cut Finger

8 7022841 1 DECAL, Warning (Euro)

9 7029490 1 DECAL, 2004 Year of Mfg.
10 7029776 1 DECAL,Euro Community (CE)
11 7029779 1 DECAL, Spart Plug International Symbol
12 7073462 1 DECAL, Caution, Symbols
13 7078022 1 DECAL, OPEI Walk/Ride
14 7074135 1 DECAL, Noise (European)
15 7046357 1 DECAL, Warning
16 7029784 2 DECAL, Deck/Chute International Warning
17 7029782 1 DECAL, OPC Bail (International Symbol)
18 7029785 1 DECAL, Operator Safety
19 7029470 1 DECAL, Patent Numbers not shown

tionItem Qt

Note

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

29

TP 400-5043-1-WB-N

THATCHERIZER ASSEMBLY

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

30

"MR" SERIES 18

THATCHERIZER ASSEMBLY

p

y

Part No Descri

-- 7061256 -- KIT, Thatcherizer (Incl. items 1 thru 27)

1 7032891 2 LATCH, Frame Attachment
2A 7026572 1 BAR, Mount (Right Hand)
2B 7026573 1 BAR, Mount (Left Hand)

3 7018499 2 ROD, Tine

4 7018700 1 SUPPORT, Wheel

5 7019948 1 TRAY, Tine

6 7018496 6 KIT, Tine Thatching Spring Was 60574

7 7014100 1 BUSHING, Wheel Adjuster

8 7018493 1 AXLE, Wheel

9 7018189 1 WHEEL, 7.00 x 1.50 Gage
10 7091705 10 NUT, 1/4-20 Hex Top Lock Was 90761 (only 9 shown)
11 7091294 4 WASHER, 1/4” Flat Was 90055
12 7022425 2 SPRING, Compression
13 7090825 2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
14 7091576 2 NUT, 1/4-20 Hex, GR5 Was 90063
15 7022424 2 CAP, Vinyl
16 7090015 2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
17 7091303 6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 Was 90383 (only 1 shown)
18 7091530 2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5 Was 90074
19 7014098 6 WASHER, Reinforcing only 1 shown
20 7090187 6 WASHER, 5/16” Split Lock only 1 shown
21 7091511 6 NUT, 5/16-18 Hex, GR5 Was 90196 (only 1 shown)
22 7014101 2 NUT, 1/2” Push
23 7014342 4 BEARING, Nyliner
24 7014103 1 SCREW, 5/16-18 x 1/4” Set
25 7090250 2 WASHER, 1/2” Flat
26 7014115 1 DECAL, Adjustment
27 7014062 1 DECAL, Thatcherizer

tionItem Qt

Note

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

31

TP 400-5043-1-WB-N

SNAPPERIZER ACCESSORY

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

32

"MR" SERIES 18

SNAPPERIZER ACCESSORY

p

y

Part No Descri

-- 7063041 -- KIT, Snapperizer (Incl. items 1 thru 5)

1 7051243 1 SCREEN, Fastener Assembly

2 7072002 1 RING, Bottom

3 7091297 3 NUT, 5/16-24 Hex, GR5 Was 90223, only 1 shown

4 7090187 3 WASHER, 5/16” Split Lock only 1 shown

5 7012587 3 SPRING only 1 shown

tionItem Qt

Note

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

33

TP 400-5043-1-WB-N

RECYCLING KITS ACCESSORY

Manual No. 7006138 21" STEEL DECK WALK BEHIND MOWER
TP 400-5043-1-WB-N

34

"MR" SERIES 18

RECYCLING KITS ACCESSORY

p

y

Part No Descri

7061200 -- KIT, Recycling Cover (Incl. items 1 & 2 below) for 4HP & above engines

7061201 -- KIT, Recycling Plug (Incl. items 1 & 2 below) for 4HP & above engines
1 7029149 1 COVER, 21” Deck
2 7016814 1 PLUG, Chute Adapter
3 7026407 1 BLADE, 21” Quad Edge Ninja

tionItem Qt

Note

Footnotes:

Manual No. 700613821" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 18

35

TP 400-5043-1-WB-N

Parts Manual fo

r

21" STEEL DECK WALK BEHIND MOWER
"MR" SERIES 18

COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE

RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS

AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE

SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

McDonough, GA, 30253 U.S.A.

Manual No. 7006138

Revision 1,

8/2/2005

TP 400-5043-1-WB-N