Snapper EMRP216017B, MR216017BV, MR216017B, MRP216017B, WMR216517B User Manual

Parts Manual fo

r

21" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

PUSH MODELS PROPELLED

MODELS

MR216017B EMRP216017B

MR216017BV EMRP216517B

MR216517B MRP216017B

WMR216017B MRP216017BV

WMR216017BV MRP216517B

WMR216517B WMRP216017B

WMRP216517B

Briggs & Startton Yard Power Products Group
Copyright © 2007
Milwaukee, WI USA. All Rights Reserved

Briggs & Startton Corporation

Revision 5,

McDonough, GA, 30253 U.S.A.

7/23/2007

Manual No. 7006135

TP 400-5001-5-WB-N

s

PAGE GROUP

4

8
12
14
16
18
22
24
26
28
30
32
34
36
38
40
42

HANDLES & CONTROLS (2002 & EARLIER)
HANDLES & CONTROLS (2003 Model Year)
CUTTING DECK, BLADE
FRONT WHEEL BRACKET
REAR WHEEL BRACKETS, LATCHES
DRIVE SYSTEM SELF-PROPELLED
TRANSMISSION (DIFFERENTIAL)
FRONT WHEELS
REAR WHEELS
DECALS
DECALS (Continued)
DECALS (Cont.)
SIDE CHUTE, ADAPTER
GRASS BAG ACCESSORY
THATCHERIZER ACCESSORY
SNAPPERIZER ACCESSORY
RECYCLING KITS ACCESSORY

Table Of Content

"MR" SERIES 17

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

3

TP 400-5001-5-WB-N

HANDLES & CONTROLS (2002 & EARLIER)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

4

"MR" SERIES 17

HANDLES & CONTROLS (2002 & EARLIER)

p

y

Part No Descri

1 7074254 1 HANDLE, Upper Was 72931 (used on All)
2 7036350 1 HANDLE, Middle- 1990 used on All
3 7046502 1 HANDLE, Lower Left Hand used on All
4 7035342 1 HANDLE, Lower Right Hand used on All
5 7047011 1 BAIL, Blade Control used on All
6 7034872 1 CLIP, Blade Control used on All
7 7072933 1 CABLE, Blade Control (49-1/4” long) used on All
8 7032826 1 HANDLE, Wheel Drive used on Self-Propelled
9 7014307 1 GRIP, Wheel Drive Handle used on Self-Propelled

-- 7029775 1 GRIP,Wheel Drive Handle (Euro) used on Self-Propelled (Euro)
10 7072932 1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
11 7012121 1 COVER, Vinyl used on Self-Propelled
12 7012122 1 SPRING, Clutch used on Self-Propelled
13 7041871 1 SECTOR, Speed used on Self-Propelled
14 7091714 1 BOLT, 5/16-18 x 1” Square Neck Carriage GR 5 Was 91238 (used on All)
15 7012093 1 SPRING, Speed Control used on Self-Propelled
16 7090188 1 WASHER, 3/8” Flat used on Self-Propelled
17 7023801 1 GRIP, Speed Control Handle Was 29383, used on Self-

18 7024087 1 DECAL, Speed Select used on Self-Propelled

-- 7029783 1 DECAL, Speed Select (Euro) used on Self-Propelled (Euro)
19 7032408 1 GUIDE, Lower V-Belt used on Self-Propelled
20 7023790 1 ROD, Transfer used on Self-Propelled

-- 7051698 1 ASSY., Transfer Rod (Incl. indented items below) used on Self-Propelled (Euro)

20a 7015752 1 LINK, Transfer used on Self-Propelled (Euro)
20b 7015753 1 BALL JOINT, 1/4-28 used on Self-Propelled (Euro)
20c 7090095 1 NUT, 1/4-28 Hex used on Self-Propelled (Euro)

21 7010937 1 CLIP, Transfer Rod 1/4” used on Self-Propelled
22 7090895 1 TEE-NUT, 5/16-18 used on Self-Propelled
23 7012114 1 BUSHING, Differential used on Self-Propelled
24 7090595 2 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
25 7090238 1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
26 7090799 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was 91026 (used on All)
27 7091601 10 NUT, 5/16-18 Hex Flange Lock GR5 Was 91070 (used on All)
28 7046202 1 BRACKET, Speed Control Rod used on Self-Propelled
29 7024641 2 WIRE TIE, 1.29” Long (Black) used on All
30 7091740 4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 Was 91189 (used on All)
31 7035744 4 T-KNOB, 5/16-18 (BLACK) used on All

tionItem Qt

Note

Propelled

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

5

TP 400-5001-5-WB-N

HANDLES & CONTROLS (2002 & EARLIER)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

6

"MR" SERIES 17

HANDLES & CONTROLS (2002 & EARLIER)

p

y

Part No Descri

32 7041870 1 LEVER, Speed Control used on Self-Propelled
33 7090391 4 WASHER, 5/16” Internal Tooth Lock used on All
34 7076978 1 NUT, 1/4-28 Hex GR5 or B used on All
35 7075634 1 FOAM GRIP, .84 I.D. x 11” long Was 73115 (Used on All)
36 7014343 2 BUSHING used on All
37 7023792 1 PIN, Clutch Handle used on Self-Propelled
38 7091020 1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
39 7024211 1 DECAL, Blade Control (Right Hand Side) used on all (except Euro)

-- 7029782 1 DECAL, Blade Control (Right Hand Side) used on European
40 7046465 1 GUIDE, Rope used on All
41 7026219 1 CLAMP, 7/8” Double Cable used on All
42 7091606 1 NUT, 5/16-24 Hex Center Lock GR5 Was 91074 (used on All)
43 7041942 1 DECAL, Shift Warning used on Self-Propelled
44 7091576 3 NUT, 1/4-20 Hex Was 91100 (used on All)
45 7091022 3 WASHER, 1/4” Internal Tooth Lock used on All
46 7091813 1 SCREW, 1/4-20 x 1-3/4” Hex Head Cap GR5 Was 91222 (used on All)

tionItem Qt

Note

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

7

TP 400-5001-5-WB-N

HANDLES & CONTROLS (2003 Model Year)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

8

"MR" SERIES 17

HANDLES & CONTROLS (2003 Model Year)

p

y

Part No Descri

1 7072931 1 HANDLE, Upper used on Push Models (except

1 7075313 1 HANDLE, Upper used on Push Model

1 7074254 1 HANDLE, Upper used on Self-Propelled
2 7036350 1 HANDLE, Middle- 1990
3 7046502 1 HANDLE, Lower Left Hand
4 7035342 1 HANDLE, Lower Right Hand
5 7047011 1 BAIL, OPC Control (12.5" Wide)
6 7034872 1 CLIP, Blade Control
7 7072933 1 CABLE, Blade Control (49-1/4” long) used on MR216517B &

7 7074868 1 CABLE, Blade Control (46.-15/16” long) used on All Other Models
8 7032826 1 HANDLE, Wheel Drive used on Self-Propelled

9 7014307 1 GRIP, Wheel Drive Handle used on Self-Propelled
10 7072932 1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
11 7012121 1 COVER, Vinyl used on Self-Propelled
12 7012122 1 SPRING, Clutch used on Self-Propelled

13A 7041871 1 SECTOR, Speed used on MRP216517B
13B 7038478 1 SECTOR, Speed used on all other Self-Propelled

14 7024641 1 WIRE TIE, 1.29” Long (Black)
15 7012093 1 SPRING, Speed Control used on Self-Propelled
16 7090188 1 WASHER, 3/8” Flat used on Self-Propelled

17A 7029383 1 GRIP, Speed Control Handle used on MRP216517B
17B 7023801 1 GRIP, Speed Control Handle used on all other Self-Propelled

18A 7046202 1 BRACKET, Speed Control Rod used on MRP216517B
18B 7032830 1 ANCHOR, Speed Control used on all other Self-Propelled

19 7032408 1 GUIDE, Lower V-Belt used on Self-Propelled
20 7023790 1 ROD, Transfer used on Self-Propelled
21 7010937 1 CLIP, Transfer Rod 1/4” used on Self-Propelled
22 7090895 1 TEE-NUT, 5/16-18 used on Self-Propelled
23 7012114 1 BUSHING, Differential used on Self-Propelled
24 7090595 2 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5
25 7090238 1 SCREW, 5/16-24 x 1” Hex Head Cap GR5
26 7091026 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
27 7091070 10 NUT, 5/16-18 Hex Flange Lock GR5
28 7091074 1 NUT, 5/16-24 Hex Center Lock GR5
29 7023813 1 CLIP, Cable/Wiring
30 7091189 4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2
31 7035744 4 T-KNOB, 5/16-18 (BLACK)

tionItem Qt

Note

MR216517B)

MR216517B

MRP216517B

models

models

models

Footnotes:

On Blade Control, SNAPPER P/N & Revision Level appear on cable

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

9

TP 400-5001-5-WB-N

HANDLES & CONTROLS (2003 Model Year)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

10

"MR" SERIES 17

HANDLES & CONTROLS (2003 Model Year)

p

y

Part No Descri

32 7079577 2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5
33 7091023 3 WASHER, 1/4” Internal Tooth Lock
34 7091100 3 NUT, 1/4-20 Hex GR5 or B
35 7090505 1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All except MR216517

36 7014343 2 BUSHING
37 7023792 1 PIN, Clutch Handle used on Self-Propelled
38 7091020 1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled

39A 7024211 1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
39B 7029782 1 DECAL, Blade Control (Left Hand Side) used on European

40 7026141 2 GUIDE, Rope used on All except MR216517

41 7073115 1 FOAM GRIP, .84 I.D. x 11” long

42A 7024087 1 DECAL, Speed Select used on Self-Propelled (except

42B 7029783 1 DECAL, Speed Select (Euro) used on Self-Propelled (Euro)

43 7023153 1 CLAMP, Casing used on All except MR216517

44 7090391 4 WASHER, 5/16” Internal Tooth Lock
45 7090545 1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, GR5 used on All except MR216517

46 7026219 1 CLAMP, 7/8” Double Cable

47A 7041870 1 LEVER, Speed Control used on MRP216517B
47B 7074255 1 LEVER, Speed Control used on all other Self-Propelled

48 7046465 1 GUIDE, Rope used on Self-Propelled
49 7076978 1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
50 7012080 1 CABLE-TIE, 7” used on Self-Propelled
51 7079577 1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
52 7023154 1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All except MR216517

53 7024649 1 WIRE TIE, 11” Long (Black) used on Self-Propelled
54 7091238 1 BOLT, 5/16-18 x 1” Square Neck Carriage GR5 used on MRP216517B

tionItem Qt

Note

and MRP216517

and MRP216517

Euro)

and MRP216517

and MRP216517

models

and MRP216517

Footnotes:

On Blade Control, SNAPPER P/N & Revision Level appear on cable

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

11

TP 400-5001-5-WB-N

CUTTING DECK, BLADE

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

12

"MR" SERIES 17

CUTTING DECK, BLADE

p

y

Part No Descri

1 7057884 1 DECK, 21” Mower Includes painted deck with

2 7091601 10 NUT, 5/16-18 Hex Flange Lock, GR5 Was 90585

3 7090731 9 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5 Was 92061

4 7091169 1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5

5 7090324 3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)

6 7090483 1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5

7 7012063 2 WASHER, 3/8” I.D. Cone
8A 7041939 1 BLADE, Cutter (Mulching)
8B 7026407 1 BLADE, 21” Ninja used on MR216517B,

9 7015626 1 HUB, Blade Drive 25mm
10 7091214 1 KEY, Hi-Pro #HP506 (Briggs engine)
11 7090201 1 SCREW, 5/16-18 x 5/16” Hex Socket Set
12 7015780 1 PULLEY, Engine Drive (25mm x 2-1/8” O.D.)
13 7090702 1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
14 7091508 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 90001 (only one shown)
15 7011791 2 RETAINER, 5/16” Bolt (only one shown)
16 7091601 3 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
17 7091122 4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539 (used on Euro

18 7031961 1 WASHER, 7/16” Flat
19 7029785 1 DECAL, Operator Safety used on Euro models
20 7046780 2 PLUG, Hole Polyethylene

21A 7046446 1 BAFFLE, Belt
21B 7074568 1 BAFFLE, Belt used on MRP216517B

22 7029000 1 SPACER, Blade Hub
23 7041400 1 WELDMENT, Fender used on Euro models
24 7046471 3 PLUG, 5/16” Square Hole used on Push models; (only one

25 7045264 3 PLUG, 5/16” Round Hole qty. 3 on Push, qty. 2 on Self-

26 7091076 1 WASHER, 5/16” Flat used on Euro models
27 7031961 2 WASHER, 7/16” Flat used on Euro models
28 7033863 1 COVER, Belt used on Euro models
29 7090534 1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
30 7013320 1 BUSHING used on Euro models

-- -- * ENGINE, 6 HP B&S Mod. 126602-0110-E1, OHV Recoil

-- -- * ENGINE, 6 HP B&S Mod. 12H802-1987-B1, Recoil

-- -- * ENGINE, 6.5 HP B&S Mod. 123K02-0119E-B1, Recoil

-- -- * ENGINE, 6.5 HP B&S 123K02-0125E-E1, Recoil

tionItem Qt

Note

decals

MRP216517B & EMRP216517B
models

models)

shown)

Propelled (only one shown)

Footnotes:

NOTE: *Purchase engine parts from engine manufacturer dealer.

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

13

TP 400-5001-5-WB-N

FRONT WHEEL BRACKET

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

14

"MR" SERIES 17

FRONT WHEEL BRACKET

p

y

Part No Descri

1 7051886 1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A &

-- 7051885 1 ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B &

2 7015761 2 BOLT, 5/16-18 Hex Washer Face Shoulder

3 7012325 2 LATCH, Height

4 7027702 2 GRIP, Latch
5A 7031017 1 ARM, Right Wheel (Round Hole)
5B 7031016 1 ARM, Left Wheel (Square Hole) not shown

6 7011791 2 RETAINER, 5/16” Bolt (Black)

7 7091601 2 NUT, 5/16-18 Hex Flange Lock Was 91070

8 7074702 1 WELDMENT, Front Wheel Bracket Was 41770

-- 7074702 1 WELDMENT, Front Wheel Bracket used on MR216517B &

9 7021119 1 AXLE

tionItem Qt

Note

6)

6)

MRP216517B models

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

15

TP 400-5001-5-WB-N

REAR WHEEL BRACKETS, LATCHES

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

16

"MR" SERIES 17

REAR WHEEL BRACKETS, LATCHES

p

y

Part No Descri

1 7012312 2 BALL BEARING, 9/16” I.D.

1 7046983 2 BALL BEARING, 9/16” I.D. (Commercial) Was 18767

2 7091012 3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)

3 7035717 2 LATCH, Height Adjusting (Long)

4 7091576 1 NUT, 1/4-20 Hex Was 90063

5 7091601 6 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070

6 7054228 1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.

7 7054229 1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.

8 7054230 1 ASSEMBLY, Wheel Arm (Right Rear) Was 54230 (Self-Propelled

8 7054246 1 ASSEMBLY, Wheel Arm, Right Rear Was 54224 (Commercial

9 7054247 1 ASSEMBLY, Wheel Arm (Left Rear) Was 54231 (Self-Propelled

9 7054247 1 ASSEMBLY, Wheel Arm, Left Rear Was 54225 (Commercial

10 7033776 1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
11 7033775 1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
12 7032722 1 ARM, Wheel, Right Rear used on Self-Propelled models
13 7032723 1 ARM, Wheel, Left Rear used on Self-Propelled models
14 7011078 2 BOLT, 5/16-18 x 1” Shoulder
15 7011791 2 RETAINER, 5/16” Bolt
16 7027702 2 GRIP, Latch
17 7033494 1 BRACKET, Right Rear Wheel
18 7033495 1 BRACKET, Left Rear Wheel
19 7021119 1 AXLE Rear axle on Push Models;

20 7035741 1 GUARD, Rear Foot used on Push models
21 7029008 1 GUARD, Rear Foot used on Self-Propelled models

21 7042918 1 GUARD, Rear Foot used on Euro Self-Propelled

22 7023791 1 RING, Split (Black) used on Self-Propelled models
23 7012616 1 SUPPORT, Foot Guard used on Self-Propelled models
24 7091604 1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 Was 90005 (used on Self-

25 7090053 1 WASHER, 1/4” Internal Tooth Lock Was 91023

tionItem Qt

Note

items 3, 10, 14, 15 & 16)

items 3, 11, 14, 15 & 16)

models)(Incl. 1, 2, 3, 12, 14, 15
& 16)

Models)(Includes 1B, 2, 3, 12,
14, 15, 16)

Models)(Includes 1, 2, 3, 13, 14,
15, & 16)

Models)(Includes 1B, 2, 3, 13,
14, 15, & 16)

Front axle on All Models

(except European)

models

Propelled models)

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

17

TP 400-5001-5-WB-N

DRIVE SYSTEM SELF-PROPELLED

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

18

"MR" SERIES 17

DRIVE SYSTEM SELF-PROPELLED

p

y

Part No Descri

1 7012354 1 BELT, Poly-Vee

2 7034179 1 LINK, Differential

-- 7051921 ASSEMBLY, Clutch Idler (includes items 3 thru 7)

3 7032832 1 ARM, Clutch Idler

4 7012124 2 PULLEY, Idler

5 7091025 1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5

6 7090303 1 NUT, 1/4-28 Hex Top Lock

7 7012117 2 BUSHING, 3/8” Plastic

8 7072284 1 SHAFT, Hex Drive

9 7024521 1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
10 7012316 1 WASHER, 3/8” Flat
11 7012126 1 SPRING, Torsion
12 7012111 1 STUD, Idler (3/8-24 thread)
13 7031873 1 HOLDER, Bearing (Inner Half)
14 7028014 1 BEARING, Ball, .38 I.D. Spherical O.D.
15 7011025 1 O-RING
16 7090289 1 NUT, 3/8-24 Hex Center Lock GR5 or B
17 7031809 1 HOLDER, Bearing (Outer Half)
18 7010937 1 CLIP, Transfer Rod 1/4”
19 7023790 1 ROD, Transfer used on Non-Euro models

-- 7051698 ASSY., Transfer Rod (Incl. items 61, 62 & 63) used on Self-Propelled Euro

20 7046784 1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled

-- 7053225 1 ASSEMBLY, Driven Disc (Cantilever) used on Self-Propelled Euro
21 7035477 1 PLATE, Thrust
22 7010746 2 RING, 5/8” External Retaining used on Self-Propelled
23 7026693 1 BALL BEARING, 3/4” I.D. used on Self-Propelled
24 7090981 4 SCREW, #10-32 x 1/4” Self-Tap Machine
25 7032664 1 SHIELD, Hex Shaft used on Self-Propelled Euro
26 7015753 BALL JOINT, 1/4-28 used on Self-Propelled Euro
27 7090095 1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro
28 7015752 1 LINK, Transfer used on Self-Propelled Euro
29 7010121 1 WASHER, 3/4” Shim
30 7090390 3 WASHER, 3/8” Internal Tooth Lock
31 7090122 1 WASHER, 3/8” Flat
32 7091630 3 NUT, 3/8-24 Hex, GR B Was 90155
33 7091511 1 NUT, 5/16-18 Hex GR5 or B Was 90196 (continued on next

34 7090187 1 WASHER, 5/16” Split Lock

tionItem Qt

Note

page)

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

19

TP 400-5001-5-WB-N

DRIVE SYSTEM SELF-PROPELLED

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

20

"MR" SERIES 17

DRIVE SYSTEM SELF-PROPELLED

p

y

Part No Descri

35 7090316 1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 91097
36 7032831 1 CONNECTOR, Transfer Rod
37 7091294 1 WASHER, Flat 1/4" (European Models Only) used on Self-Propelled Euro
38 7017696 1 BUSHING
39 7029025 1 SPRING, Wheel Drive
40 7012125 1 GUIDE, Thrust Plate (3/8-24 thread)
41 7013847 1 RETAINER, 3/8” Bolt
42 7090799 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was 91026
43 7041855 1 DISC, Driven (Cantilever)

-- 7059462 1 ASSY, Deck Bracket (Includes items 44 & 45)
44 7033774 1 BRACKET, Deck Was 31919 (Now 17696 +

45 7012117 2 BUSHING, Flange
46 7021758 1 SPACER used on Commercial models
47 7090534 1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
48 7090391 1 WASHER, 5/16” Internal Tooth Lock
49 7011724 1 WASHER, Spring
50 7091597 1 PIN, 3/32 x 1/2” Cotter Was 90555
51 7091122 2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
52 7090731 3 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
53 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
54 7012122 1 SPRING, Clutch
55 7090053 1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
56 7061275 KIT, Drive Disc Assembly

tionItem Qt

Note

33774)

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

21

TP 400-5001-5-WB-N

TRANSMISSION (DIFFERENTIAL)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

22

"MR" SERIES 17

TRANSMISSION (DIFFERENTIAL)

p

y

Part No Descri

-- 7059070 1 ASSEMBLY, Transmission Was 53945 (Includes 1 thru 30)

1 7092062 1 NUT, 5/16-24 Hex Lock, GR C Was 11201
2 7092063 1 WASHER, Cone
3 7019213 1 PULLEY, Poly-Vee Belt
4 7011724 2 WASHER, Spring only 1 shown
5 7053942 1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9, 10 &

6 7029034 1 HOUSING, Right Side
7 7014155 3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
8 7012314 2 SEAL, 5/8” Internal Dia.

9 7029035 2 BEARING, Tapered- (Differential Housing)
10 7073963 1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375 Thk. Was 11767
11 7016544 1 PLUG, Housing
12 7050767 1 GEAR, Input
13 7050830 1 AXLE, Short
14 7012495 1 GEAR, Differential (46 tooth)
15 7031970 2 PLATE, 46T Gear
16 7031965 2 WASHER, Thrust, 3/4” I.D.
17 7090557 4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
18 7011774 1 GASKET, Housing
19 7090189 3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
20 7051903 1 BRACKET, Differential
21 7091825 4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
22 7012543 1 SPACER, Axle Gear
23 7050831 1 AXLE, Long
24 7021115 4 GEAR, Pinion (12 tooth)
25 7012500 4 SPACER, Pinion Gear
26 7011110 4 SHAFT, Pinion
27 7090376 4 NUT, #10-32 Hex Nyloc only 1 shown
28 7053939 1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
29 7029033 1 HOUSING, Left
30 7024442 3 GASKET, 5/8” O. D.

-- 7061017 “OO” Grease (32 oz.)

tionItem Qt

Note

30)

Footnotes:

DO NOT OVERFILL Transmission!
NOTE: Maximum capacity of transmission case is 4 oz.

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

23

TP 400-5001-5-WB-N

FRONT WHEELS

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

24

"MR" SERIES 17

FRONT WHEELS

p

y

Part No Descri

1 7022374 2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and

2 7029010 2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and

3 7090377 2 NUT, 7/16-20 Hex Center Lock Jam

4 7012309 2 BUSHING, Axle

5 7031961 6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1)

6 7017829 2 PLUG, Wheel

tionItem Qt

Note

Earlier

Later

for Self-Propelled Models

Footnotes:

Always replace wheel nut # 90377 when removing or replacing wheel.

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

25

TP 400-5001-5-WB-N

REAR WHEELS

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

26

"MR" SERIES 17

REAR WHEELS

p

y

Part No Descri

1A 7035739 2 WHEEL, 10 x 1.75” Plastic (Push Models) used on 2002 Model Year and

1B 7074924 2 WHEEL, 10 x 1.75” Plastic (Push Models) used on 2003 Model Year and

2A 7035740 2 WHEEL, 10 x 1.75” Plastic (Self-Propelled Models) used on 2002 Model Year and

2B 7029011 2 WHEEL, 10 x 1.75” Plastic (Self-Propelled Models) used on 2003 Model Year and

3 7090377 2 NUT, 7/16-20 Hex Center Lock Jam

4 7012309 2 BUSHING, Axle

5 7031961 4 WASHER, 7/16 x 1” O.D. Flat

6 7017829 2 PLUG, Wheel

tionItem Qt

Note

Earlier

Later

Earlier

Later

Footnotes:

Always replace wheel nut # 90377 when removing or replacing wheel.

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

27

TP 400-5001-5-WB-N

DECALS

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

28

"MR" SERIES 17

DECALS

p

y

Part No Descri

1 7024211 1 DECAL, Blade Control

2 7029782 1 DECAL, Blade Control (Euro)

3 7024087 1 DECAL, Speed Select used on Self-Propelled models

4 7029783 1 DECAL, Speed Select (Euro) used on Self-Propelled models

5 7013010 1 DECAL, Danger, Cut Finger

6 7022841 1 DECAL, Warning (Euro)

7 7041942 1 DECAL, Shift Warning used on Self-Propelled models

8 7029657 1 DECAL, SNAPPER, 3.87 Dia. (Push)

9 7046357 1 DECAL, Warning
10 7029785 1 DECAL, Operator Safety
11 7073462 1 DECAL, Caution Symbols

tionItem Qt

Note

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

29

TP 400-5001-5-WB-N

DECALS (Continued)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

30

"MR" SERIES 17

DECALS (Continued)

p

y

Part No Descri

12 7046714 1 DECAL, SNAPPER (Deck) silver letters, black background
13 7029713 1 DECAL, SNAPPER silver letters, black background
14 7029776 1 DECAL, Euro Community (CE)
15 7074386 1 DECAL, SNAPPER (Commercial) gold letters/red border/black

-- 7075618 1 DECAL, SNAPPER gray letters/red border/black

16 7029779 1 DECAL, Spark Plug International Symbol
17 7028440 1 DECAL, Deck Warning

-- 7072921 1 DECAL, Deck Warning used on EMRP216017B (similar

18 7075619 1 DECAL, Ninja

tionItem Qt

Note

background

background

to 28440)

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

31

TP 400-5001-5-WB-N

DECALS (Cont.)

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

32

"MR" SERIES 17

DECALS (Cont.)

p

y

Part No Descri

19 7029470 1 DECAL, Patent Numbers
20 7029780 1 DECAL, Primer (European)
21 7029781 1 DECAL, Air Filter (European)
22 7029784 1 DECAL, Deck/Chute (European)
23 7075378 1 DECAL, 2003 Year of Manufacture shown

-- 7074548 1 DECAL, 2002 Year of Manufacture

-- 7073433 1 DECAL, 2001 Year of Manufacture used on EMRP216017B
24 7046720 1 DECAL, Chute/Deflector Warning
25 7074135 1 DECAL, Noise (European)
26 7073335 1 DECAL, OPEI
27 7016134 1 DECAL, Caution Tag not used in 2003 model year

tionItem Qt

Note

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

33

TP 400-5001-5-WB-N

SIDE CHUTE, ADAPTER

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

34

"MR" SERIES 17

SIDE CHUTE, ADAPTER

p

y

Part No Descri

1 7051951 ASSEMBLY, Bag Adapter & Cover Includes items 2 thru 9; used on

2 7016107 1 ADAPTER, Grass Bag
3 7019287 1 COVER, Bag Adapter
4 7023000 1 HINGE, Chute Cover
5 7091064 5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
6 7090053 5 WASHER, 1/4” Internal Tooth Lock Was 91023
7 7091576 5 NUT, 1/4-20 Hex Was 91100
8 7032661 1 STOP, Cover

9 7023042 1 MOLDING, Trim
10A 7016050 1 ADAPTER, Grass Bag
10B 7058037 ASSEMBLY, Grass Bag Adapter

11 7024340 1 SPACER, .316 I.D. x .375 O.D. x .310 thick
12 7090951 1 NUT, 5/16-18 Hex Large Flange Center Lock
13 7011791 1 RETAINER, 5/16” Bolt
14 7091508 1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 90001
15 7042965 1 CHUTE, Side
16 7090122 2 WASHER, 3/8" Flat Was 91514
17 7024085 2 WING-NUT, 5/16-18 Nyloc
18 7029149 1 COVER, 21” Deck
19 7090951 2 NUT, 5/16-18 Hex Large Flange Center Lock

tionItem Qt

Note

European Models Only

Footnotes:

NOTE: For Grass Catcher Components see Grass Bag page.

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

35

TP 400-5001-5-WB-N

GRASS BAG ACCESSORY

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

36

"MR" SERIES 17

GRASS BAG ACCESSORY

p

y

Part No Descri

-- 7060791 KIT, Grass Bag Catcher (Includes items 1 thru 5)

1 7074734 1 GRASS BAG, Slider Type (Black)

2 7050711 1 ASSEMBLY, Slider

3 7042489 1 CONNECTOR, Grass Bag (weldment)

4 7019247 1 WIRE, Bag Adapter

5 7016050 1 ADAPTER, Bag

6 7058037 1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)

7 7047081 1 ADAPTER, Bag

8 7047082 1 BRACKET, Rope Pulley

9 7091984 1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine

10 7012306 1 BUSHING, Flange
11 7024228 1 PULLEY, Plastic
12 7091601 1 NUT, 5/16-18 Hex Flange Lock GR5 Was 91070
13 7072107 2 WASHER, 15/32” Flat
14 7013860 4 RIVET, 3/16 x .344

tionItem Qt

Note

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

37

TP 400-5001-5-WB-N

THATCHERIZER ACCESSORY

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

38

"MR" SERIES 17

THATCHERIZER ACCESSORY

p

y

Part No Descri

-- 7061256 KIT, Thatcherizer (Includes items listed below) Recommended for propelled

1 7032891 2 ** LATCH, Frame Attachment

2A 7026572 1 BAR, Mount (Right Hand)
2B 7026573 1 BAR, Mount (Left Hand)

3 7018499 2 ROD, Tine

4 7018700 1 SUPPORT, Wheel

5 7019948 1 TRAY, Tine

6 7018496 6 KIT, Tine Thatching Spring Was 60574

7 7014100 1 ** BUSHING, Wheel Adjuster

8 7018493 1 ** AXLE, Wheel

9 7018189 1 WHEEL, 7.00 x 1.50 Gage

10 7091705 10 * NUT, 1/4-20 Hex Top Lock Was 90761, only 9 shown
11 7091294 4 * WASHER, 1/4” Flat Was 90055
12 7022425 2 ** SPRING, Compression
13 7090825 2 * BOLT, 1/4-20 x 1-1/4” Hex, GR 5
14 7091576 2 * NUT, 1/4-20 Hex, GR 5 Was 90063
15 7022424 2 ** CAP, Vinyl
16 7090015 2 * BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
17 7091303 6 * BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5 Was 90383, only 1 shown
18 7091530 2 * BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR 5 Was 90074
19 7014098 6 * WASHER, Reinforcing (.343 I.D.) only 1 shown
20 7090187 6 * WASHER, 5/16” Split Lock only 1 shown
21 7091511 6 * NUT, 5/16-18 Hex, GR 5 Was 90196, only 1 shown
22 7014101 2 ** NUT, 1/2” Push
23 7014342 4 ** BEARING, Nyliner
24 7014103 1 ** SET SCREW, 5/16-18 x 1/4” slotted headless cup point
25 7090250 2 WASHER, 1/2” Flat
26 7014115 1 DECAL, Adjustment
27 7014062 1 DECAL, Thatcherizer

-- 7060554 1 HARDWARE BAG, Thatcherizer 21” (Std.) Not shown

-- 7060555 1 HARDWARE BAG, Thatcherizer 21” (Special) Not shown

-- 26700 1 MANUAL, Operator's (61256) Not shown

tionItem Qt

Note

models only.

Footnotes:

* Included in Hardware Bag # 60554
** Included in Hardware Bag # 60555

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

39

TP 400-5001-5-WB-N

SNAPPERIZER ACCESSORY

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

40

"MR" SERIES 17

SNAPPERIZER ACCESSORY

p

y

Part No Descri

-- 7063041 KIT, Snapperizer (Incl. items 1 thru 5)

1 7051243 1 SCREEN, Fastener Assembly

2 7072002 1 RING, Bottom

3 7091297 3 NUT, 5/16-24 Hex, GR5 Was 90223, only 1 shown

4 7090187 3 WASHER, 5/16” Split Lock only 1 shown

5 7012587 3 SPRING only 1 shown

tionItem Qt

Note

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

41

TP 400-5001-5-WB-N

RECYCLING KITS ACCESSORY

Manual No. 7006135 21" STEEL DECK WALK BEHIND MOWER
TP 400-5001-5-WB-N

42

"MR" SERIES 17

RECYCLING KITS ACCESSORY

p

y

Part No Descri

-- 7061200 KIT, Recycling Cover (Incl. items 1 & 2 below) for 4HP & above engines

-- 7061201 KIT, Recycling Plug (Incl. items 1 & 2 below) for 4HP & above engines

1 7029149 1 COVER, 21” Deck

2 7016814 1 PLUG, Chute Adapter

3 7026407 1 BLADE, 21” Quad Edge Ninja

tionItem Qt

Note

Footnotes:

Manual No. 700613521" STEEL DECK WALK BEHIND MOWER

"MR" SERIES 17

43

TP 400-5001-5-WB-N

Parts Manual fo

r

21" STEEL DECK WALK BEHIND MOWER
"MR" SERIES 17

IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS

PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.

IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY

OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS

Briggs & Startton Yard Power Products Group
Copyright © 2007
Milwaukee, WI USA. All Rights Reserved

Briggs & Startton Corporation

WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD

McDonough, GA, 30253 U.S.A.

Revision 5,

7/23/2007

Manual No. 7006135

TP 400-5001-5-WB-N