Parts Manual fo
r
K
T
T
21" STEEL DEC
WALK BEHIND MOWERS
"MR" SERIES 14 & 15
PUSH MODELS PROPELLED
MODELS
MCRS215014KWV EMRP216014B
MR215014B EMRP216015B
MR215015
MR216015B MCRP215015KWV
MR216015BV MRP216014B
MR216015
MCRP215014KWV
MRP216015B
MRP216015BV
COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 7,
McDonough, GA, 30253 U.S.A.
1/10/2006
Manual No. 7006064
TP 400-5160-7-WB-N
s
PAGE GROUP
4
8
10
12
14
16
18
20
22
24
30
32
34
36
38
40
42
44
46
48
Handles & Controls
Handles & Controls (Swivel Wheel Model)
Cutting Deck, Blade
Front Wheel Bracket (Non-Swivel Wheel Models)
Front Wheel Bracket (Swivel Wheel Model)
Rear Wheel Brackets, Latches
Front Wheels (Non-Swivel Wheel Models)
Front Wheels (Swivel Wheel Model)
Rear Wheel
Drive System Self-Propelled
Transmission (Differential)
Throttle Controls
Decals (Part 1)
Decals (Part 2)
Grass Bag (Non-Swivel Wheel Models)
Grass Bag (Swivel Wheel Model)
Side Chute, Adapter
Accessory - Snapperizer
Accessory - Recycling Kits
Accessory - Thatcherizer
Table Of Content
"MR" SERIES 14 & 15
Manual No. 700606421" STEEL DECK
3
TP 400-5160-7-WB-N
Handles & Controls
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
4
"MR" SERIES 14 & 15
Handles & Controls
p
y
Part No Descri
1 7074384 HANDLE, Upper Was 41933, Used on All Series
7074254 HANDLE, Upper Was 72931, Used on All Series
2 7036350 HANDLE, Middle Used on Non Commercial
7046737 HANDLE, Middle Used on Commercial
3A 7046502 HANDLE, Lower Left Hand Not used on "MCRP" Models
3B 7047121 HANDLE, Lower L.H. Adjustable Used on "MCRP" Models
4A 7035342 HANDLE, Lower Right Hand Not used on "MCRP" Models
4B 7033986 HANDLE, Lower R.H. Adjustable Used on "MCRP" Models
5 7047011 BAIL, OPC Control
6 7034872 CLIP, Blade Control
7A 7035808 CABLE, Blade Control (46-1/16") Used on Series 14 B&S
7046553 CABLE, Blade Control (55-3/4") Used on Series 14 Tecumseh
7073030 CABLE, Blade Control (54-13/16") Used on Series 15 Tecumseh
7072933 CABLE, Blade Control (49-1/4") Used on Series 15 B&S
7B 7073444 CABLE, Blade Control (52-13/16") Was 46702, Used on All Kaw
8 7032826 HANDLE, Wheel Drive Used on Self-Propelled
9 7014307 GRIP, Wheel Drive Handle Used on Self-Propelled
7029775 GRIP, Wheel Drive Handle Used on Self-Propelled (Euro)
10 7023134 CABLE, Clutch Pull (Z-Bend, 36-3/16" Long) Used on Propelled Ser. 14 B&S
7072932 CABLE, Clutch Pull (Z-Bend, 38-5/8" Long) Used on Propelled Ser. 15 B&S
7047092 CABLE, Clutch Pull (Z-Bend, 38-5/16" Long) Used on Propelled (All Kaw)
11 7012121 COVER, Vinyl Used on Self-Propelled
12 7012122 SPRING, Clutch Used on Self-Propelled
13 7041871 SECTOR, Speed Used on Self-Propelled
14 7091714 BOLT, 5/16 x 1" Round Head Carriage, Grade 5 Was 91238 (Used on All)
15 7012093 SPRING, Speed Control Used on Self-Propelled
16 7090188 WASHER, 3/8" Flat Used on Self-Propelled
17 7023801 GRIP, Speed Control Handle Was 29383, Used on Propelled
18 7024087 DECAL, Speed Select Used on Self-Propelled
7029783 DECAL, Speed Select Used on Self-Propelled (Euro)
19 7032408 GUIDE, Lower V-Belt Used on Self-Propelled
20 7023790 ROD, Transfer Used on Self-Propelled
7051698 ASSEMBLY, Transfer Rod Incl. indented items below. Used
20A 7015752 LINK, Transfer Used on Propelled Euro
20B 7015753 BALL JOINT, 1/4-28 Used on Propelled Euro
20C 7090095 NUT, 1/4-28 Hex Used on Propelled Euro
21 7010937 CLIP, Transfer Rod Used on Self-Propelled
tionItem Qt
Note
14
15
on Propelled Euro
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
5
TP 400-5160-7-WB-N
Handles & Controls
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
6
"MR" SERIES 14 & 15
Handles & Controls
p
y
Part No Descri
22 7090895 TEE-NUT, 5/16-18 Used on Self-Propelled
23 7012114 BUSHING, Differential Used on Self-Propelled
24 7090595 BOLT, 5/16-18 x 3/4" Flange Lock, Grade 5
25 7090238 SCREW, 5/16-24 x 1" Hex Cap, Grade 5
26 7090799 BOLT, 5/16-18 x 5/8" Short Neck Carriage, Grade 5 Was 91026 (Used on All)
27 7091601 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070 (Used on All)
28 7046202 BRACKET, Speed Control Rod Used on Self-Propelled
29 7024641 TIE, Wire
30 7091740 4 SCREW, 5/16-18 x 1-7/8 Curved Head, Grade 2 Was 91189 (Used on All)
31 7035744 4 T-KNOB, 5/16-18
32 7041870 LEVER, Speed Control Used on Self-Propelled
33 7090391 4 WASHER, 5/16 Internal Tooth Lock
34 7076978 2 NUT, 1/4-20 Hex, Grade 5 or B (2 with Kawasaki Engine)
35 7090505 SCREW, 1/4-20 x 2" Hex Cap, Grade 5 Used on Commercial
36 7014343 2 BUSHING
37 7023792 PIN, Clutch Handle Used on Self-Propelled
38 7091020 PUSH-NUT, 1/4" (For handle pin). Used on
39 7024211 DECAL, Blade Control (Right Hand Side) Used on All (Except Euro)
7029782 DECAL, Blade Control (Right Hand Side) Used on Euro
40 7046465 GUIDE, Rope
41 7026219 CLAMP
42 7091606 NUT, 5/16-24 Hex Center Lock, Grade 5 Was 91074 (Used on All
43 7041942 DECAL, Shift Warning Used on Self-Propelled
44 7091576 NUT, 1/4-20 Hex Was 91100 (Used on All)
45 7091022 WASHER, 1/4" Internal Tooth Locking
46 7091813 SCREW, 1/4-20 x 1-3/4 Hex Cap, Grade 5 Was 91222 (Used on All)
47 7046707 2 BRACE (See "Handles & Controls
48 7075634 FOAM GRIP Was 73115 (Used on All)
tionItem Qt
Note
Propelled
(Swivel Wheel Model)"
illustration and parts list for
hardware). Used on Commercial
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
7
TP 400-5160-7-WB-N
Handles & Controls (Swivel Wheel Model)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
8
"MR" SERIES 14 & 15
Handles & Controls (Swivel Wheel Model)
p
y
Part No Descri
1 7074384 HANDLE, Upper Was 41933, Used on Swivel
2 7046737 HANDLE, Middle Used on Swivel
3 7033985 HANDLE, Lower Left Hand Used on Swivel
4 7033986 HANDLE, Lower Right Hand Used on Swivel
5 7047011 CONTROL, Blade Used on Swivel
6 7034872 CLIP, Blade Control Used on Swivel
7 7073444 CABLE, Blade Control (52-13/16") Was 46702, Used on Swivel
8 7090595 BOLT, 5/16-18 x 3/4" Flange Lock, Grade 5 Used on Swivel
9 7090799 2 BOLT, 5/16-18 x 5/8" Carriage, Grade 5 Was 91026 (Used on Swivel)
10 7091601 3 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070 (Used on Swivel)
11 7024641 TIE, Wire Used on Swivel
12 7091740 4 SCREW, 5/16-18 x 1-7/8 Curved Head, Grade 2 Was 91189 (Used on Swivel)
13 7035744 4 T-KNOB, 5/16-18 Used on Swivel
14 7090391 4 WASHER, 5/16 Internal Tooth Lock Used on Swivel
15 7076978 3 NUT, 1/4-20 Hex, Grade 5 or B Used on Swivel
16 7090505 SCREW, 1/4-20 x 2" Hex Cap, Grade 5 Used on Swivel
17 7024211 DECAL, Blade Control (R.H. Side) Used on Swivel
18 7046465 GUIDE, Rope Used on Swivel
19 7079577 SCREW, 1/4-20 x 1-1/2" Hex Cap, Grade 5 Used on Swivel
20 7046669 CABLE, Swivel Lock Used on Swivel
21 7046707 2 BRACES, Handle Used on Swivel
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
9
TP 400-5160-7-WB-N
Cutting Deck, Blade
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
10
"MR" SERIES 14 & 15
Cutting Deck, Blade
p
y
Part No Descri
1 7057884 DECK, Mower (Includes painted Deck with
2 7091601 10 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 90585
3 7090731 10 BOLT, 5/16-18 x 1/2" Short Neck Carriage (Gr. 5)
4 7091169 BOLT, 5/16-18 x 1-1/8" Short Neck Carriage, Grade 5
5 7090324 3 SCREW, 3/8-16 x 1" Self-Tapping (Engine Mounting)
6 7090483 SCREW, 3/8-24 x 1-3/4" Hex Head Cap, Grade 5
7 7012063 2 WASHER, Cone
8 7041939 BLADE, Cutter
9 7015626 HUB, Blade Drive 25mm (Non Commercial Models)
10 7091214 KEY, Woodruff (Briggs) (Non Commercial Models)
11 7090201 SCREW, 5/16-18 x 5/16" Hex Socket Set
12 7015780 PULLEY, Engine (25mm I.D. x 2-1/8" O.D.) (Non Commercial) Models
13 7031968 SHIELD, Belt Opening Cover (Push Models Only)
14 7091508 2 BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 Was 90001 (Only 1 Shown)
15 7011791 2 RETAINER, 5/16 Bolt (Only 1 Shown)
16 7091601 3 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070
17 7010783 2 KEY, Woodruff (Kawasaki Only)
18 7021764 PULLEY, Engine (7/8" I.D. x 2-1/8" O.D.) (Kawasaki Only)
19 7012927 HUB, Blade Drive 7/8" (Kawasaki Only)
20 7026407 BLADE, Cutter (Mulching) (Quad Edge - Ninja) (Kawasaki
21 7046446 BAFFLE, Belt
22 7029000 SPACER
23 7090167 SCREW, 3/8-24 x 2" Hex Head Cap, Grade 5 (Kawasaki Only)
24 7046471 PLUG, 5/16" Square Hole (qty 3 on Push) (Only 1 Shown)
25 7045264 PLUG, 5/16" Round Hole (qty 3 on Push; qty 2 on Self-
26 7091076 WASHER, 5/16" Flat (European)
27 7031961 2 WASHER, 7/16" Flat (European)
28 7033863 COVER, Belt (European)
29 7090534 SCREW, 5/16-18 x 1/2" Hex Head Cap Grade 5 (European)
30 7013320 BUSHING (European)
31 7090702 BOLT, 5/16-18 x 2-1/4" Hex Flange Lock (European)
32 7041400 STRUCTURE, Fender (European)
33 7091122 4 SCREW, 1/4-20 x 1/2" Hex Self-tapping Was 90539 (European)
34 7091192 WASHER, 1/2" Flat (For model MCRS215014KWV)
35 7029785 DECAL, Operator Safety (European)
36 7046780 2 PLUG, Hole
tionItem Qt
Note
Decals)
Only)
propelled) (1 Shown)
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
11
TP 400-5160-7-WB-N
Front Wheel Bracket (Non-Swivel Wheel Models)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
12
"MR" SERIES 14 & 15
Front Wheel Bracket (Non-Swivel Wheel Models)
p
y
Part No Descri
1 7051886 ASSEMBLY, Arm Right Wheel (Consists of Items 2, 3, 4, 5A, 6)
7051885 ASSEMBLY, Arm Left Wheel (Consists of Items 2, 3, 4, 5B, 6)
2 7015761 BOLT, 5/16-18 x 3/4" Shoulder
3 7012325 LATCH, Height
4 7027702 GRIP, Latch
5A 7031017 ARM, Right Wheel (Round Hole)
5B 7031016 ARM, Left Wheel (Square Hole) (Not shown)
6 7011791 RETAINER, 5/16" Bolt
7 7091601 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070
8 7074702 BRACKET, Front Wheel Was 41770
9 7021119 AXLE
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
13
TP 400-5160-7-WB-N
Front Wheel Bracket (Swivel Wheel Model)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
14
"MR" SERIES 14 & 15
Front Wheel Bracket (Swivel Wheel Model)
p
y
Part No Descri
1 7057782 WELDMENT, Front Bracket
2 7079577 SCREW, 1/4-20 x 1-1/2" Hex Cap, Grade 5
3 7090372 NUT, 1/4-20 Hex Lock
4 7046629 BRACKET, Swivel Lock
5 7046668 SPRING, Torsion
6 7090505 BOLT, 1/4-20 x 2" Hex, Grade 5
7 7027344 4 WASHER, 41/64" Flat Was 15992
8 7046628 4 BUSHING, 5/8" Nylon
9 7013864 2 LUBE FITTING, Straight (press-fit for .187 dia. Hole)
10 7076978 NUT, 1/4-20 Hex Nylok
11 7014106 2 PIN, 1 /4 x 1-3/4" Roll
12 7057781 WELDMENT, L.H. Swivel Bracket
7072230 WELDMENT, R.H. Swivel Bracket Was 57789 (Not Shown)
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
15
TP 400-5160-7-WB-N
Rear Wheel Brackets, Latches
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
16
"MR" SERIES 14 & 15
Rear Wheel Brackets, Latches
p
y
Part No Descri
1 7012312 BEARING, 9/16
7046983 BEARING, 9/16 Was 18767 (Commercial)
2 7091012 3 SCREW, #10-32 x 3/8" Self-Tapping (Torx)
3 7035717 LATCH, Height Adjusting (Long)
4 7091576 NUT, 1/4-20 Hex, Grade 5 Was 90063
5 7091601 6 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070
6 7054228 ASSEMBLY, Wheel Arm (Right Rear) (Push Models). (Round
7 7054229 ASSEMBLY, Wheel Arm (Left Rear) (Push Models). (Square
8 7054230 ASSEMBLY, Wheel Arm (Right Rear) Was 54230 (Self-Propelled
7054246 ASSEMBLY, Wheel Arm (Right Rear) Was 54224 (Commercial
9 7054247 ASSEMBLY, Wheel Arm (Left Rear) Was 54231 (Self-Propelled
7054247 ASSEMBLY, Wheel Arm (Left Rear) Was 54225 (Commercial
10 7033776 ARM, Round Axle End (Round Opening) (Right Rear) (Push Models)
11 7033775 ARM, Square Axle End (Square Opening) (Left Rear) (Push Models)
12 7032722 ARM, Wheel Right Rear (Self Propelled Models)
13 7032723 ARM, Wheel Left Rear (Self Propelled Models)
14 7011078 BOLT, 5/16-18 x 1" Shoulder
15 7011791 RETAINER, 5/16 Bolt
16 7027702 GRIP, Latch
17 7033494 BRACKET, Right Rear Wheel
18 7033495 BRACKET, Left Rear Wheel
19 7021119 AXLE (Rear on Push Models - Also
20 7035741 GUARD, Rear Foot (Push Models)
21 7029008 GUARD, Rear Foot (Self-Propelled Models) (except
7042918 GUARD, Rear Foot (European)
22 7023791 RING
23 7012616 SUPPORT, Foot Guard
24 7091604 BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 Was 90005
25 7090053 WASHER, 1/4 Internal Tooth Lock Was 91023
tionItem Qt
Note
Opening - Includes Items 3, 10,
14, 15, 16)
Opening - Includes Items 3, 11,
14, 15, 16)
models)(Incl. 1, 2, 3, 12, 14, 15
& 16)
Models)(Includes 1B, 2, 3, 12,
14, 15, 16)
Models)(Includes 1, 2, 3, 13, 14,
15, & 16)
Models)(Includes 1B, 2, 3, 13,
14, 15, & 16)
Front on All)
European)
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
17
TP 400-5160-7-WB-N
Front Wheels (Non-Swivel Wheel Models)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
18
"MR" SERIES 14 & 15
Front Wheels (Non-Swivel Wheel Models)
p
y
Part No Descri
1 7046990 WHEEL, 8 x 1.75 Plastic Was 41938 (Push & Self-
2 7035727 WHEEL, 8 x 1.75 (Commercial)
3 7031121 2 HUB-CAP (Commercial)
4 7090377 NUT, 7/16-20 Hex (Thin)
5 7031961 WASHER, 7/16 x 1" O.D. Flat (Qty. of (2) for Push & Self-
tionItem Qt
Note
propelled)
Propelled & Qty. of 1 for
Commercial Models)
Footnotes:
Always replace Wheel Nut P/N 90377 when removing or replacing wheel.
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
19
TP 400-5160-7-WB-N
Front Wheels (Swivel Wheel Model)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
20
"MR" SERIES 14 & 15
Front Wheels (Swivel Wheel Model)
p
y
Part No Descri
1 7046667 PIN, Wheel 7/16"x 2.75"
2 7046708 PIN, Swivel Wheel Lock
3 7035727 WHEEL, 8 x 1.75 Steel
4 7046666 SPACER, Wheel
7031961 9 WASHER, 7/16" Flat Space wheel as needed
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
21
TP 400-5160-7-WB-N
Rear Wheel
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
22
"MR" SERIES 14 & 15
Rear Wheel
p
y
Part No Descri
1 7041987 WHEEL, 10 x 1.75 Plastic (Push Models)
7035740 WHEEL, 10 x 1.75 Plastic (Self-propelled Models)
2 7035726 WHEEL, 10 x 1.75 (Commercial Self-propelled
7046678 WHEEL, 10 x 1.75 (With Bearing) (Commercial Push Model)
3 7031960 HUB-CAP (Commercial Models)
4 7090377 NUT, 7/16-20 Hex (Thin)
5 7031961 WASHER, 7/16 x 1" O.D. Flat (Qty. of (2) For Push Models &
tionItem Qt
Note
Model)
Qty. of (1) for Self-Propelled
Models)
Footnotes:
Always replace Wheel Nut P/N 90377 when removing or replacing wheel.
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
23
TP 400-5160-7-WB-N
Drive System Self-Propelled
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
24
"MR" SERIES 14 & 15
Drive System Self-Propelled
p
y
Part No Descri
1 7012354 BELT, Poly-Vee
2 7034179 LINK, Differential
7051921 ASSEMBLY, Clutch Idler Includes items 3 thru 7
3 7032832 ARM, Clutch Idler
4 7012124 2 PULLEY, Idler
5 7091025 SCREW, 1/4-28 x 1-3/8" Hex Head Cap, Grade 5
6 7090303 NUT, 1/4-28 Hex Top Lock
7 7012117 2 BUSHING, 3/8 I.D. Nylon
8 7072284 SHAFT, Hex Drive Was 23744
9 7024521 PULLEY, Poly-V (2" O.D.) Non Commercial Models
7019383 PULLEY, Poly-V (2" O.D.) Commercial Models
10 7012316 WASHER, 3/8" Flat
11 7012126 SPRING, Torsion
12 7012111 STUD
13 7031873 HOLDER, Bearing (Inner Half)
14 7028014 BEARING, Ball
15 7011025 O-RING
16 7090289 NUT, 3/8-24 Hex Center Lock, Grade 5
17 7031809 HOLDER, Bearing (Outer Half)
18 7010937 CLIP, 1/4 Right Arc (Transfer Rod)
19 7023790 ROD, Transfer (Except European)
7051698 ASSEMBLY, Transfer Rod (Incl. items 61, 62 & 63)
20 7012353 BELT, Engine Drive
7046784 BELT, Engine Drive (Stretch Type Belt) MRP216014B Model
7053225 ASSEMBLY, Driven Disc Includes items 21 thru 29
21 7035477 PLATE, Thrust
22 7010746 RING, Retaining (Qty 2 on Self-Propelled)(Qty 1
23 7026693 BEARING, Ball Self-Propelled Models
7029027 BEARING, Ball Commercial Models
24 7090981 4 SCREW, #10-32x1/4" Self-Tapping Machine Commercial Models
25 7061276 ASSEMBLY, Hub (Includes 7011108 Bushing & 7090913
Screws)
26 7023364 RING, Driven Commercial Models
27 7031013 PLATE, Ring Retaining Commercial Models
28 7090913 5 SCREW, #10-24 x 1/2" Self-Tapping Machine (Torx) (Commercial)
29 7010121 WASHER, 3/4 Shim Commercial Models
30 7090390 3 WASHER, 3/8 Internal Tooth Lock
31 7090122 WASHER, 3/8" Flat
tionItem Qt
Note
(European)
on Commercial)
Was 53217
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
25
TP 400-5160-7-WB-N
Drive System Self-Propelled
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
26
"MR" SERIES 14 & 15
Drive System Self-Propelled
p
y
Part No Descri
32 7091630 3 NUT, 3/8-24 Hex, Grade B Was 90155
33 7091511 NUT, 5/16-18 Hex, Grade 5 Was 90196
34 7090187 WASHER, 5/16 Split Lock
35 7090316 BOLT, 5/16-18 x 3/4" Carriage, Grade 5 Was 91097
36 7032831 CONNECTOR, Transfer Rod
37 7061275 KIT, Drive Disc Assembly
38 7017696 BUSHING
39 7029025 2 SPRING (Wheel Drive & Idler)
40 7032116 ARM, Idler
41 7013847 RETAINER, 3/8" Bolt
42 7090947 BOLT, 1/4-20 x 1-1/2" Carriage, Grade 5
43 7090372 NUT, 1/4-20 Hex Center Lock, Grade 5 or B
44 7052987 ASSEMBLY, Deck Bracket Was 59462 (1999 MRP Model)
44 7052987 ASSEMBLY, Deck Bracket (Includes items 44, 45 & 46)
44 7033774 BRACKET, Deck Was 31919
45 7012117 2 BUSHING, Flange Plastic Non Commercial Models
45 7012306 2 BUSHING, Flange Commercial Models
46 7021758 SPACER Commercial Models
47 7090534 SCREW, 5/16-18 x 1/2" Hex Head Cap, Grade 5
48 7090391 WASHER, 5/16 Internal Tooth Lock
49 7011724 WASHER, Spring
50 7091597 PIN, 3/32 x 1/2" Cotter Was 90555
51 7091122 2 SCREW, 1/4-20 x 1/2" Self-Tapping Was 90539
52 7090731 BOLT, 5/16-18 x 1/2" Short Neck Carriage, Grade 5
53 7091601 2 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070
54 7012122 SPRING, Clutch
55 7016380 SCRAPER, Drive Pulley
56 7012125 GUIDE, Thrust Plate
57 7090799 BOLT, 5/16-18 x 5/8" Short Neck Carriage, Grade 5 Was 91026
58 7041855 DISC, Driven (Cantilever) Non Commercial Models
59 7090053 WASHER, 1/4" Internal Tooth Lock European Models
60 7032664 SHIELD, Hex Shaft European Models
61 7015753 JOINT, Ball European Models
62 7090095 NUT, 1/4-28 Hex Grade 5 European Models
63 7015752 LINK, Transfer European Models
tionItem Qt
Note
(MCRP Model)
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
27
TP 400-5160-7-WB-N
Drive System Self-Propelled
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
28
"MR" SERIES 14 & 15
Drive System Self-Propelled
p
y
Part No Descri
64 7091294 WASHER, 1/4" Flat Was 90055 (European Models)
65 7037732 BRACKET, Strap MCRS215014KWV Model
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
29
TP 400-5160-7-WB-N
Transmission (Differential)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
30
"MR" SERIES 14 & 15
Transmission (Differential)
p
y
Part No Descri
7059070 ASSEMBLY, Transmission Was 53945 (Includes 1 thru 30)
1 7092062 4 NUT, 5/16-24 Hex Lock Was 11201 (Only 2 Shown)
2 7014263 WASHER, Spring
3 7019213 PULLEY, Poly-Vee Belt
4 7011724 2 WASHER, Spring (Only 1 Shown)
5 7053942 ASSEMBLY, Housing Right (Includes items 6, 7, 8, 9, 10 &
6 7029034 HOUSING, Right Side
7 7014155 3 SCREW, 5/16-24 x 1-1/8" Rib Neck, Grade 5
8 7012314 2 SEAL, 5/8 I.D.
9 7029035 2 BEARING, Differential
10 7073963 BEARING, Ball Was 11767
11 7016544 PLUG, Housing
12 7050767 GEAR, Input
13 7050830 AXLE, Short
14 7012495 GEAR, Differential (46 Tooth)
15 7031970 2 PLATE
16 7031965 2 WASHER, Thrust
17 7090557 4 SCREW, #10-32 x 1-1/2" Hex Head Cap, (Only 1 Shown)
18 7011774 GASKET, Housing
19 7090189 3 WASHER, 5/16 Internal/External Tooth Lock (1 Shown)
20 7051903 BRACKET, Differential
21 7091825 4 SCREW, 1/4-20 x 1-1/4" Self-Tapping (Only 1 Shown)
22 7012543 SPACER, Axle Gear
23 7050831 AXLE, Long
24 7021115 4 GEAR, Pinion (12 Tooth)
25 7012500 4 SPACER, Pinion Gear
26 7011110 4 SHAFT, Pinion
27 7090376 4 NUT, #10-32 Hex Nyloc (Only 1 Shown)
28 7053939 ASSEMBLY, Housing Left (Includes items 8, 9 & 29)
29 7029033 HOUSING, Left Side
30 7024442 3 GASKET, 5/8 O.D.
7061017 "00" GREASE (32 oz.)
tionItem Qt
Note
30)
Footnotes:
NOTE: Installing over 4 oz. of grease will cause the differential to leak.
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
31
TP 400-5160-7-WB-N
Throttle Controls
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
32
"MR" SERIES 14 & 15
Throttle Controls
p
y
Part No Descri
7026467 4 Cycle - Conduit Length - 49.00" For KAWASAKI Commercial
tionItem Qt
Note
models only
Footnotes:
NOTE: B&S and Tec. engine models have fixed speed engines. No throttle control used.
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
33
TP 400-5160-7-WB-N
Decals (Part 1)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
34
"MR" SERIES 14 & 15
Decals (Part 1)
p
y
Part No Descri
1A 7024211 DECAL, Blade Control
2A 7024087 DECAL, Speed Sector (Self-Propelled)
3 7013010 DECAL, Danger
4 7029713 DECAL, Snapper
5 7029657 DECAL, SNAPPER 3.87 Dia. (Push)
6 7046357 DECAL, Warning
7 7041942 DECAL, Shift Warning (Self-Propelled)
8 7028440 DECAL, Deck Warning
7072921 DECAL, Deck Warning (On Models EMRP216014B &
9 7029470 DECAL, Patent Numbers
tionItem Qt
Note
MR215015T)
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
35
TP 400-5160-7-WB-N
Decals (Part 2)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
36
"MR" SERIES 14 & 15
Decals (Part 2)
p
y
Part No Descri
1B 7029782 DECAL, Blade Control (Euro)
2B 7029783 DECAL, Speed Sector (Self-Propelled) (European)
10 7029776 DECAL, CE (European)
11 7029779 DECAL, Spark Plug (European)
12 7029780 DECAL, Primer (European)
13 7029781 DECAL, Air Filter (European)
14 7029784 DECAL, Deck/Chute (European)
15 7073433 DECAL, 2001 Year of Manufacture (Shown)
7072404 DECAL, 1999 Year of Manufacture (Not shown)
7041827 DECAL, 1998 Year of Manufacture (Not shown)
7036434 DECAL, 1997 Year of Manufacture (Not shown)
16 7023009 DECAL, Noise (European)
17 7029785 DECAL, Operator Safety (European)
18 7046714 DECAL, Deck Snapper
19 7046720 DECAL, Chute/Deflector Warning
20 7022841 DECAL, Warning
21 7073335 DECAL, OPEI
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
37
TP 400-5160-7-WB-N
Grass Bag (Non-Swivel Wheel Models)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
38
"MR" SERIES 14 & 15
Grass Bag (Non-Swivel Wheel Models)
p
y
Part No Descri
7060935 KIT, Grass Bag Catcher Was 61919 (Includes 2 thru 4)
1 7059322 ASSEMBLY, Grass Bag Was 54058 (Includes 2 thru 4)
2 7074425 BAG, Door Type (Wide) (Black) (13" Wide) Was 29963
3 7051906 ASSEMBLY, Bag Wire (13" Wide)
4 7042489 CONNECTOR, Grass Bag
5 7016050 ADAPTER, Bag
6 7058037 ASSEMBLY, Bag Adapter (Includes items 7 thru 14)
7 7047081 ADAPTER, Bag
8 7047082 BRACKET, Rope Pulley
9 7091984 SCREW, 5/16-18 x 1-1/4" Pan Head Machine
10 7012306 BUSHING, Flange
11 7024228 PULLEY, Plastic
12 7091601 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070
13 7072107 4 WASHER, 15/32"
14 7013860 4 RIVET, 3/16 x .344
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
39
TP 400-5160-7-WB-N
Grass Bag (Swivel Wheel Model)
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
40
"MR" SERIES 14 & 15
Grass Bag (Swivel Wheel Model)
p
y
Part No Descri
7060936 KIT, Grass Bag Catcher (Includes items 1 thru 4)
1 7074426 BAG, Grass Was 23774 (Commercial)
2 7050711 ASSEMBLY, Slider
3 7042489 CONNECTOR, Grass Bag
4 7019247 WIRE, Bag Connector
5 7016050 ADAPTER, Bag
6 7058037 ASSEMBLY, Bag Adapter (Includes items 7 thru 14)
7 7047081 ADAPTER, Bag
8 7047082 BRACKET, Rope Pulley
9 7091984 SCREW, 5/16-18 x 1-1/4" Pan Head Machine
10 7012306 BUSHING, Flange
11 7024228 PULLEY, Plastic
12 7091601 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070
13 7072107 4 WASHER, 15/32" Flat
14 7013860 4 RIVET, 3/16 x .344
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
41
TP 400-5160-7-WB-N
Side Chute, Adapter
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
42
"MR" SERIES 14 & 15
Side Chute, Adapter
p
y
Part No Descri
1 7051951 ASSEMBLY, Bag Adapter & Cover (For European Models Only).
2 7016107 ADAPTER, Grass Bag
3 7019287 COVER, Bag Adapter
4 7023000 HINGE, Chute Cover
5 7091064 5 BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5
6 7090053 5 WASHER, 1/4 Internal Tooth Lock Was 91023
7 7091576 5 NUT, 1/4-20 Hex, Grade 5 Was 91100
8 7032661 STOP, Cover
9 7023042 MOLDING, Trim
10A 7016050 ADAPTER, Grass Bag
11 7024340 SPACER
12 7090951 NUT, 5/16-18 Hex Flange Center Lock
13 7011791 2 RETAINER, 5/16 Bolt
14 7091508 BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 Was 90001
15 7042965 CHUTE, Side
16 7090122 2 WASHER, 3/8" Flat Was 91514
17 7024085 2 WING-NUT, 5/16-18 Nyloc
18 7029149 COVER, 21" Deck
19 7090951 2 NUT, 5/16-18 Large Flange Center Lock
tionItem Qt
Note
(Includes items 2 thru 9)
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
43
TP 400-5160-7-WB-N
Accessory - Snapperizer
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
44
"MR" SERIES 14 & 15
Accessory - Snapperizer
p
y
Part No Descri
7063041 KIT, Snapperizer (Includes Items 1 Thru 5)
1 7051243 SCREEN, Fastener Assembly
2 7072002 RING, Bottom
3 7091297 3 NUT, 5/16-24 Hex, Grade 5 Was 90223 (Only 1 Shown)
4 7090187 3 WASHER, 5/16 Split Lock (Only 1 Shown)
5 7012587 3 SPRING (Only 1 Shown)
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
45
TP 400-5160-7-WB-N
Accessory - Recycling Kits
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
46
"MR" SERIES 14 & 15
Accessory - Recycling Kits
p
y
Part No Descri
7061200 KIT, Recycling Cover (Includes Items Below). For 4HP
7061201 KIT, Recycling Plug (Includes Items Below). For 4HP
1 7029149 COVER, 21" Deck
2 7016814 PLUG, Chute Adapter
3 7026407 BLADE, 21" Quad Edge Ninja
tionItem Qt
Note
& above engines
& above engines
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
47
TP 400-5160-7-WB-N
Accessory - Thatcherizer
Manual No. 7006064 21" STEEL DECK
TP 400-5160-7-WB-N
48
"MR" SERIES 14 & 15
Accessory - Thatcherizer
p
y
Part No Descri
7061256 KIT, Thatcherizer (Includes Items 1 Thru 27)
1 7032891 2 LATCH, Frame Attachment
2A 7026572 BAR, Mount (Right Hand)
2B 7026573 BAR, Mount (Left Hand)
3 7018499 2 ROD, Tine
4 7018700 SUPPORT, Wheel
5 7019948 TRAY, Tine
6 7018496 6 KIT, Tine Thatching Spring Was 60574
7 7014100 BUSHING, Wheel Adjuster
8 7018493 AXLE, Wheel
9 7018189 WHEEL, 7.00 x 1.50 Gage
10 7091705 10 NUT, 1/4-20 Hex Top Lock Was 90761 (Only 9 Shown)
11 7091294 4 WASHER, 1/4 Flat Was 90055
12 7022425 2 SPRING, Compression
13 7090825 2 BOLT, 1/4-20 x 1-1/4" Hex, Grade 5
14 7091576 2 NUT, 1/4-20 Hex, Grade 5 Was 90063 (Only 1 Shown)
15 7022424 2 CAP, Vinyl
16 7090015 2 BOLT, 1/4-20 x 2-1/2" Carriage (Only 1 Shown)
17 7091303 6 BOLT, 5/16-18 x 1" Carr., Gr. 5 Was 90383 (Only 1 Shown)
18 7091530 2 BOLT, 1/4-20 x 3/4" Carr. Gr. 5 Was 90074
19 7014098 6 WASHER, Reinforcing (Only 1 Shown)
20 7090187 6 WASHER, 5/16 Split Lock (Only 1 Shown)
21 7091511 6 NUT, 5/16-18 Hex, Gr. 5 Was 90196 (Only 1 Shown)
22 7014101 2 NUT, 1/2 Push
23 7014342 4 BEARING, Nyliner
24 7014103 SCREW, 5/16-18 x 1/4" Set
25 7090250 2 WASHER, 1/2 Flat
26 7014115 DECAL, Adjustment
27 7014062 DECAL, Thatcherizer
7060965 KIT, Adapter Was 61395
tionItem Qt
Note
Footnotes:
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
49
TP 400-5160-7-WB-N
Parts Manual fo
r
K
21" STEEL DEC
WALK BEHIND MOWERS
"MR" SERIES 14 & 15
COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
Manual No. 7006064
Revision 7,
1/10/2006
TP 400-5160-7-WB-N
Loading...