Snapper M301019B, M300919BE, M280817B User Manual
Specifications and Main Features
- Model: Snapper Standard Rear Engine Rider Series 17 & 19
- Engines:
- 8 HP Briggs & Stratton with Electric Start
- 8 HP Briggs & Stratton with Recoil Start
- 10 HP Briggs & Stratton with Electric Start
- Cutting Deck Sizes:
- 25” 28” 30”
- Drive System: Torque Transmission Assembly (offered for 17 and 19 Series)
- Wheel Sizes:
- Front: 4.10/3.50 x 4 Pneumatic Tire
- Rear:
- 16/6.50 x 8 Turf
- 4.80/4.00 Turf Saver
- Fuel Tank Capacity:
- Operator Seat Assembly included
- Weight: Confidential
- Electrical Equipment:
- Recoil Starter and Electric Starter
- Cutting Decks:
- 25” and 28” with and without the mulching kits and add-ons
- Other Features:
- Manual Height adjustment lever,
- Safety brake lever and interlock
- Decals and safety instructions,
- Weight kit dump carts and other accessories
Frequently Asked Questions
Q: What kind of engines are fitted in the Snapper Standard Rear Engine Rider?
A: The Scooter comes with 8 HP and 10 HP which contain both recoil and electric starters with Briggs and Stratton engines.
Q: What is the range of sizes I can use for cutting decks on this model?
A: Cutting deck sizes of this model include the ordinary 25”, 28” and 30” sizes.
Q: What common rider features should I be aware of that would enhance safety?
A: Yes, this type of vehicle is always equipped with a brake lever and an interlock system that facilitates the riders’ safety while riding.
Q: How may I go about altering the height or elevation of a cut?
A: Height adjustment is done by means of a manual lever which has been specially made for this purpose.
Q: How many different kinds of wheels can one expect to use with it?
A: The front tires are air-filled with the size of 4.10/3.50 x 4 while the back ones can either be 16/6.50 x 8 Turf or 4.80/4.00 Turf Saver.
User Manual
Loading...