Specifications and Main Features
- Model: Snapping LTD Series Grass Trimming Tractor
- Type of Engine: Electric Briggs & Stratton
- Rated Engine Power: 12 Horsepower
- Rotation Speed of Engine: Engine rotates at 3400 RPM's
- Fuel Tank Size: Not Provided
- Tire Pressure: Tire Pressure of Front is 12 and rear is 10
- Mowed Areas: 33 Inches and 41 inches long
- Height of Cut: Movable to 1-4 inches in 9 steps
- Type of Gear Transmission: SSC Stand for Smooth Start Clutch
- Electrical System in Use: Keyswitch, solenoid, seat switch, blade engaging lever, switch for clutch&PTO & light switch
- Features of Safety: Interlocks preventing the machine turning on in dangerous conditions
- Reminders for Assignment of Maintenance: In the first 5 hours of use recommended everyday, 25 multiplied by each operational hour, or at the end of the specific season
- Weight: Not Provided
- Dimensions: Not Provided
Frequently Asked Questions
Q1: How do i start by starting a non starting engine?
A1: Begin by ensuring that the ignition switch is set to the RUN position, throttle control to START, the blade locking lever must be unlocked, and the gear shift should be set to NEU. After checking the amount of fuel, make an attempt to turn on the engine, if it does not switch on the first time, proceed to check the ignition and grounding circuitry.
Q2: How do I keep the battery in optimum state for maximum efficiency?
A2: Batteries must always be kept in a well-maintained state, this includes regular inspection of the battery cells to check for the electrolyte level and filling the batteries with distilled water whenever necessary. If the tractor is unused, cleaning of the terminals and a monthly charging is necessary to ensure that there is no corrosion on the terminals.
Q3: What should be the pressure in the tires of the lawn tractor?
A3: The pressure of the front tires and the rear tires must be balanced at 12 and 10 PSI for maximum balance.
Q4: At what intervals do I have to service the mower blades?
A4: The frequency of mowing operations are the determinants of how often blades require servicing. Blades should be sharpened or replaced if there is noticeable dullness otherwise it is also essential to ensure that the blades are properly checked for balance to avoid any excessive amount of vibration.
Q5: What safety measures should I follow when I have to do maintenance?
A5: All maintenance must start with turning off the engine, removing the spark plug wire and disconnecting battery cables, safety goggles and gloves must always be worn before dealing with sharp blades or assembling parts out of caution.
User Manual
Loading...