Snapper LT200H48IBV2, WLT180H48HBV2, WLT160H42HBV2, LT160H42HBV, LT160H42HBV2 User Manual

Parts Manual fo

r

I

E

V

V

V

2

2

2

2

2

2

2

LAWN TRACTORS ELECTRIC CLUTCH

HYDRO DRIV

SERIES H &

MODEL

LT160H42HB

LT160H42HBV2

LT160H42IB
LT180H42IB

LT180H42IBV

LT180H48HBV2

LT200H42IBV
LT200H48IBV

WLT160H42HBV

WLT180H42IBV

WLT180H48HBV

WLT200H48IBV

COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

Revision 6,

McDonough, GA, 30253 U.S.A.

2/20/2006

Manual No. 7006449

TP 400-5015-6-TC-N

s

PAGE GROUP

4

6
10
14
18
20
26
28
30
34
36
38
40
44
48
50
54
56
58
60
64
66
70
72
74
76
78
80
82
84
86
88

WHEELS, FRONT & REAR
HOOD, BUMPER, HEADLIGHTS & COMPONENTS
STEERING WHEEL, CONSOLE, FUEL TANK
SEAT, REAR FENDER & COMPONENTS
FRONT AXLE
FRAME, CLUTCH, BRAKE & STEERING COMPONENTS
TRANSMISSION GROUP (Hydro Drive)
HYDRO RESERVOIR ASSEMBLY
BLADE ENGAGEMENT & TRANSMISSION CONTROLS
IMPLEMENT LIFT PARTS
ENGINE COMPONENTS, PT.1 (Model LT160H42HBV)
ENGINE COMPONENTS, PT.2 (Model LT160H42HBV2)
ENGINE COMPONENTS, PT.3 (Model LT18H Models)
ENGINE COMPONENTS, PT.4 (Model LT200H Models)
ENGINE COMPONENTS, PT.5 (Model LT160H42IBV)
42" CUTTING DECK ASSEMBLY
BELT, BLADE BRAKE- 42" CUTTING DECK
SPINDLE ASSEMBLY- 42" CUTTING DECK
48" CUTTING DECK ASSEMBLY (Series "H") PT.1
48" CUTTING DECK ASSEMBLY (Series "H") PT.2
48" CUTTING DECK ASSEMBLY (Series "I") PT.1
48" CUTTING DECK ASSEMBLY (Series "I") PT.2
48" DECK IDLER ASSEMBLIES
48" DECK SPINDLE ASSEMBLY- Series "H"
48" DECK SPINDLE ASSEMBLY- Series "I"
DECALS PT. 1
DECALS PT. 2
ELECTRICAL COMPONENTS
ELECTRICAL SCHEMATIC (All Series "I" except LT160H42IBV)
ELECTRICAL SCHEMATIC (LT160H42IBV)
ELECTRICAL SCHEMATIC (LT160H42HBV & WLT160H42HBV)
ELECTRICAL SCHEMATIC (LT160H42HBV2, LT180H48HBV2)

Table Of Content

SERIES H & I

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

3

TP 400-5015-6-TC-N

WHEELS, FRONT & REAR

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

4

SERIES H & I

WHEELS, FRONT & REAR

p

y

Part No Descri

1 7058517 2 ASSEMBLY, Front Tire & Rim (Incl. items 2, 3, 4, 5 & 6) used on 42” Series “H” & 42”

-- 7058521 2 ASSEMBLY, Front Tire & Rim (Incl. items 2, 3A, 4A, 5 & 6) used on 48” Series “H” & 48”

2 7072704 1 TIRE, 15 x 6.00-6 K500 Tread Kenda per front tire assembly
3 7022772 1 RIM, 6.00 x 3.50, Grey per front tire assembly

3A 7071966 1 RIM, 6.00 x 4.00, Grey per front tire assembly

4 7014483 2 BEARING, Wheel PM per front tire assembly

4A 7028722 2 BALL BEARING, Wheel (Heim) per front tire assembly

5 7012234 1 VALVE STEM, Air per front tire assembly
6 7076998 1 FITTING, Lube 1/4-28 Tapered Thread Was 13876, per front tire

7 7010935 1 WASHER, 5/32 x 25/32” I.D. x 1-1/2” O.D. Flat per front tire assembly
8 7029618 1 WASHER, Hub-Cap Retaining per rear tire assembly

9 7029617 2 WASHER, 3/4 x 1-5/16 x 1/16” per rear tire assembly
10 7011022 1 HUB CAP per rear tire assembly
11 7091516 1 PIN, 5/32 x 1” Cotter per front tire assembly
12 7010746 1 RING, 3/4” External Retaining Was 29738, per rear tire

13 7058519 2 ASSEMBLY, Rear Tire & Rim (Includes items 5, 14 & 15A) used on Models LT160H42HBV

-- 7058520 2 ASSEMBLY, Rear Tire & Rim (Includes items 5, 14 & 15B) used on Models

14 7024454 1 RIM, 8 x 7.00 Keyed Hub Grey per rear tire assembly

15A 7072706 1 TIRE, 18 x 9.50-8 K500 Tread Kenda per rear tire assembly
15B 7072707 1 TIRE, 20 x 10.00-8 K500 Tread Kenda per rear tire assembly

16 7031038 1 DUST CAP per front tire assembly

tionItem Qt

Note

Series “I”

Series “I”

assembly

assembly

& LT160H42IBV

LT160H42HBV2,
LT180H48HBV2 & all Series “I”

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

5

TP 400-5015-6-TC-N

HOOD, BUMPER, HEADLIGHTS & COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

6

SERIES H & I

HOOD, BUMPER, HEADLIGHTS & COMPONENTS

p

y

Part No Descri

1A 7063298 1 HOOD, Mozart-Scoop-Red Was 26406 or 61383, used on

1B 7024471 1 HOOD, Mozart used on Model LT160H42HBV

2 7016766 1 ROD, Hood Support

3 7024718 1 CLIP, Spring-Latch

4 7090999 2 SCREW, 1/4-20 x 5/8 Pan Head Self-Tap (Torx)

5 7076978 6 NUT, 1/4-20 Hex Nyloc

6 7073905 2 DECAL, Snapper- Hood- 3D

7 7090803 4 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, GR 2

8 7029572 1 PANEL, Hood, Left Hand, Black

9 7029571 1 PANEL, Hood, Right Hand, Black
10 7029020 1 DECAL, Hood (Right Hand) used on Model LT160H42HBV

-- 7029019 1 DECAL, Hood (Left Hand) used on Model LT160H42HBV

-- 7027820 1 DECAL, LX1642H RH- Mozart Hood used on Model LT160H42HBV2

-- 7027821 1 DECAL, LX1642H LH- Mozart Hood used on Model LT160H42HBV2

-- 7046756 1 DECAL, Hood (Right Hand) used on Model LT180H48HBV2

-- 7046757 1 DECAL, Hood (Left Hand) used on Model LT180H48HBV2

-- 7075002 1 DECAL, Hood (Right Hand) used on 42” Series “I” Models

-- 7075003 1 DECAL, Hood (Left Hand) used on 42” Series “I” Models

-- 7075390 1 DECAL, Hood (Right Hand) used on Model LT160H42IBV

-- 7075391 1 DECAL, Hood (Left Hand) used on Model LT160H42IBV

-- 7075004 1 DECAL, Hood (Right Hand) used on 48” Series “I” Models

-- 7075005 1 DECAL, Hood (Left Hand) used on 48” Series “I” Models

-- 7075391 1 DECAL, Hood (Right Hand) used on Model LT180H42IBV

-- 7075390 1 DECAL, Hood (Left Hand) used on Model LT180H42IBV

-- 7078058 1 DECAL, Hood (Right Hand) used on Model LT200H42IBV2

-- 7078059 1 DECAL, Hood (Left Hand) used on Model LT200H42IBV2
11 7091095 8 POP RIVET, 1/8 x 3/8”
12 7092098 1 SCREW, 1/4-20 x 1-1/4” Hex Head Cap w/Locking Patch
13 7091106 5 SCREW, M4.8 x 1.59 x 16mm HXCRHD Sems Special
14 7029570 1 GRILL, Sloped, Black
15 7026482 1 CLIP, “J” Open Type .4 Bundle Dia., .281 Dia. Hole
16 7026377 1 DECAL, Molded Medallion Was 71544 (used on Series “H”

17 7029602 1 LENS, Rippled, Sloped
18 7026180 1 DECAL, Lens/Reflector-LH Sloped Grill
19 7026179 1 DECAL, Lens/Reflector-RH Sloped Grill
20 7073446 1 LANYARD, Hood, 14-3/4” long used on Model LT160H42HBV

-- 7073445 1 LANYARD, Hood, 16-13/32” long used on Models

tionItem Qt

Note

Models LT160H42HBV2,
LT180H48HBV2 & all Series “I”

Models)

LT160H42HBV2 &
LT180H48HBV2

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

7

TP 400-5015-6-TC-N

HOOD, BUMPER, HEADLIGHTS & COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

8

SERIES H & I

HOOD, BUMPER, HEADLIGHTS & COMPONENTS

p

y

Part No Descri

-- 7075068 1 LANYARD, Hood 14-3/4” long used on Model LT160H42IBV &

-- 7075069 1 LANYARD, Hood, 16” long used on Series “I” Models
21 7090858 4 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
22 7024061 2 SHOULDER BOLT, 3/8-16 thread
23 7034324 1 BRACE. Hood Support/Stop
24 7011791 1 RETAINER, 5/16” Bolt
25 7026172 2 LAMP 1141
26 7024709 2 SOCKET, Headlight Snap-In
27 7026171 1 HARNESS, Headlight M&G Sockets

28A 7028764 1 PLENUM used on Models

28B 7074966 1 PLENUM used on Series “I” Models
29A 7026844 1 FOAM, 2 x 2 x 3.5” used on Models

29B 7072355 1 FOAM, 1 x 1 x 10” used on Series “I” Models
30A 7026803 1 FOAM, 1/2 x 3/4 x 14.25” used on Models

30B 7072354 1 FOAM, 3/4 x 3/4 x 10-3/4” used on Series “I” Models

tionItem Qt

Note

LT180H42IBV

LT160H42HBV2 &
LT180H48HBV2 only

LT160H42HBV2 &
LT180H48HBV2 only

LT160H42HBV2 &
LT180H48HBV2 only

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

9

TP 400-5015-6-TC-N

STEERING WHEEL, CONSOLE, FUEL TANK

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

10

SERIES H & I

STEERING WHEEL, CONSOLE, FUEL TANK

p

y

Part No Descri

1 7053746 1 ASSEMBLY, Console (Includes items 2 thru 7) used on all models
2 7028565 1 CONSOLE, OPPLT-Electric Clutch
3 7011791 4 RETAINER, 5/16” Bolt
4 7091495 2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
5 7053398 2 ASSEMBLY, Strap-Clinch Stud replaces 52891
6 7076978 2 NUT, 1/4-20 Hex Nyloc
7 7026196 1 ASSEMBLY, BEARING, Flange .75 I.D. PM
8 7091575 4 NUT, 5/16-18 Hex Center Lock, GR 5 or B

9 7022368 1 GEAR, Pinion, Steering
10 7022369 1 PIN, Dowel, 1/4 x 1-1/4”
11 7024641 1 WIRE TIE, 1.29 long Black LT160H42HBV2 &

12 7052907 1 ASSEMBLY, Fuel Tank/Cap 8-QT (Includes item 13)
13 7012515 1 CAP, Fuel Tank Was 14363
14 7091290 2 NUT, #10-24 Hex Nyloc Was 91599
15 7026343 1 SWITCH, Ignition-Afterfire Solenoid (Includes item 27)
16 7090951 1 NUT, 5/16-18 Hex Large Flange Center Lock
17 7033883 1 BRACKET, Hood Latch Catch
18 7022380 1 SHAFT, Steering
19 7012765 1 PIN, .26 x 2-1/4” Spiral
20 7028679 1 LIGHT CLUSTER, Indicator LT160H42HBV2,

21 7029595 1 STEERING WHEEL, Kelch Vector
22 7028562 1 DECAL, Console used on Model LT160H42HBV

-- 7028563 1 DECAL, Console LT160H42HBV2 &

-- 7075447 1 DECAL, Console used on Model LT160H42IBV

-- 7075308 1 DECAL, Console used on all other Series “I”

23 7073406 1 KEY, Switch (With Cover) Was 23504
24 7091001 1 SCREW, 5/16-18 x 5/8” Truss Head (Torx)
25 7023187 1 LIGHT SWITCH, Rocker SPST
26 7029714 1 SPACER, .65 x .88 x .10 LT160H42HBV &

27 7012685 1 NUT, 5/8-32 Hex Was 29721
28 7023506 1 BEZEL
29 7091188 2 SCREW, #10-24 x 5/8” Flat Head Cross Countersunk Machine
30 7091018 1 NUT, #8-32 Hex, GR 2 or B
31 7023655 1 LEVER, Throttle Control
32 7024642 1 CONTROL, Throttle (conduit length: 44.60”) used on Model LT160H42HBV

-- 7028564 1 CONTROL, Throttle (conduit length: 26.25”) LT160H42HBV2,

-- 7075449 1 CONTROL, Throttle (conduit length: 48.0”) used on Model LT160H42IBV

tionItem Qt

Note

LT180H48HBV2 only

LT180H48HBV2 & all Series “I”

LT180H48HBV2

Models

LT160H42HBV2 only

LT180H48HBV2 & Series “I”

Footnotes:

NOTE: Snapper Part Number is stamped on throttle control conduit.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

11

TP 400-5015-6-TC-N

STEERING WHEEL, CONSOLE, FUEL TANK

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

12

SERIES H & I

STEERING WHEEL, CONSOLE, FUEL TANK

p

y

Part No Descri

-- 7024530 1 CONTROL, Throttle (conduit length: 47.60”) used on Model LT180H42IBV
33 7091017 1 SCREW, #8-32 x 3/8” Cross-Recessed, Fillester Head, GR 2
34 7028542 1 SWITCH, PTO Electric Clutch
35 7028566 1 CABLE, Choke Control LT160H42HBV2,

-- 7075448 1 CHOKE CABLE, 16HP Single Intek B&S used on Model LT160H42IBV
36 7025007 3 LENS, Indicator Light LT160H42HBV2,

37 7035496 1 BEARING, .750 I.D.
38 7074560 1 HOLDER, BOTTLE (wire)
39 7074561 1 BOTTLE, Water
40 7091075 2 SCREW, #10-24 x 5/8” Hex Washer Self-Tap Was 90363
41 7091552 2 WASHER, .219 x .500 x .049 Flat
42 7091290 2 NUT, #10-24 Hex Nyloc replaces 91599

tionItem Qt

Note

LT180H48HBV2 & all Series “I”
except LT160H42IBV

LT180H48HBV2 & Series “I”

Footnotes:

NOTE: Snapper Part Number is stamped on throttle control conduit.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

13

TP 400-5015-6-TC-N

SEAT, REAR FENDER & COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

14

SERIES H & I

SEAT, REAR FENDER & COMPONENTS

p

y

Part No Descri

1 7059214 1 ASSEMBLY, Seat Support-Electric PTO (Incl. items 2 thru 6) replaces 53745
2 7074204 1 SUPPORT, Seat- Electric Clutch replaces 28579
3 7023354 1 SWITCH, Seat, Gray (NC)
4 7073266 2 SPRING, Cushion Holder
5 7028580 1 HOLDER, Seat Cushion Electric Clutch
6 7015707 1 SWITCH, Seat, Black (NO)
7 7017875 2 KNOB, 3 Prong 5/16-18 x 2” Stud
8 7091001 4 SCREW, 5/16-18 x 5/8” Truss Head (Torx)

9 7091819 4 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap Was 90362
10 7073346 1 SEAT PAN, Tractor- “No Mow in Reverse” Fender
11 7091761 2 RIV-NUT, 5/16-18 Round
12 7073905 1 DECAL, Snapper- Hood- 3D, Silver Letters replaces 22971
13 7026415 1 DECAL, Caution-Battery Installation, Fender
14 7073344 1 SUPPORT, Fender, Electric Clutch-K 46
15 7091523 2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Swage Form
16 7091524 2 SCREW, 5/16-18 x 1-1/4” Swage
17 7091105 4 SCREW, #10-16 x 1/2 HXWA
18 7073347 1 QUADRANT- Shift- No Mow in Reverse
19 7073408 1 COVER, Shift (Black)
20 7073424 1 DECAL, Shift Cover Hydro
21 7091525 3 BOLT, 5/16-18 x 1/2” Hex Flange Lock, GR5
22 7033318 1 SUPPORT, Seat, Upper
23 7074452 1 ROD, Seat Hinge
24 7091503 1 HAIR PIN, 3/32 x 1.5”
25 7035579 1 SEAT, Operator, V560 (shown)

- 7044897 1 SEAT, Milsco High Back (XB150) (not shown) used on Series “I” Models
26 7019109 2 SPRING COVER, Rubber
27 7090913 1 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
28 7028571 1 RECEPTACLE, Female Wire Harness Relay used on Model LT160H42HBV

- 7028520 1 RECEPTACLE, Female Wire Harness Relay used on LT160H42HBV2 &

- 7072722 1 HARNESS, Main LT18 & 20 HP V-Twin Electric Clutch used on Series “I” Models
29 7058851 1 ASSEMBLY, Stop Latch- Lock Out
30 7073306 1 LATCH, Overide-No Mow in Reverse
31 7015761 1 SHOULDER BOLT, 5/16-18
32 7090953 3 SHIM-WASHER
33 7091298 1 NUT, 5/16-18-3B Hex Nyloc
34 7073223 1 SPRING, Extension- Manual No Mow

tionItem Qt

Note

LT180H48HBV2

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

15

TP 400-5015-6-TC-N

SEAT, REAR FENDER & COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

16

SERIES H & I

SEAT, REAR FENDER & COMPONENTS

p

y

Part No Descri

35 7073307 1 SOLENOID, Electric
36 7073308 1 ROD, Connecting- No Mow in Reverse
37 7090913 2 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx) Was 90307
38 7074632 1 CAP - Vinyl

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

17

TP 400-5015-6-TC-N

FRONT AXLE

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

18

SERIES H & I

FRONT AXLE

p

y

Part No Descri

1 7010746 1 RING, 3/4” External Retaining
2 7010935 3 WASHER, 3/4” x 1-1/8” Flat
3 7014669 3 LUBE FITTING 57352
4 7019034 1 ARM, Steering
5 7019467 1 BEARING, Spindle
6 7028689 1 SPACER, .5 x .75 x 1.78
7 7031036 2 THRUST WASHER
8 7033383 2 BRACKET, Deck Hanger-Front Axle.

9 7035372 2 SPACER, Steering Stop, Cast Axle
10 7041251 1 WELDMENT, Right Hand Spindle Wheel
11 7041250 1 WELDMENT, Left Hand Spindle Wheel
12 7074423 1 BRACKET, Cast Axle Front used on Series “H” Models

- 7075080 1 BRACKET, Cast Axle, Front used on Series “I” Models
13 7073851 1 AXLE, Steel- Tractor
14 7073852 2 SPACER, Spindle Bearing- Steel Axle
15 7073853 2 SPACER, Axle- Steel
16 7073855 1 SPACER, Hex
17 7074182 2 BEARING, 3/4” I.D. DX
18 7074424 1 BRACKET, Cast Axle, Rear
19 7074600 2 SPACER, .39 x .5 x 1.72
20 7091299 2 NUT, 3/8-16 Hex Nyloc Was 76979
21 7090122 2 WASHER, 3/8” Flat SAE
22 7091575 5 NUT, 5/16-18 Hex Center Lock Was 90184
23 7090250 3 WASHER, 1/2” Flat
24 7091557 2 SCREW, 3/8-16 x 2-3/4” Hex Head Cap, GR2 Was 90795
25 7090831 2 SCREW, 5/16-18 x 2-3/4” Hex Head Cap, GR5
26 7090842 1 ROLL PIN, 1/4 x 1-1/4”
27 7027174 4 SCREW, 5/16-18 x 2” Hex Head Cap, GR5 Was 90930
28 7091121 1 NUT, 1/2-13 Hex Nyloc
29 7091821 1 SCREW, 1/2-13 x 3” Hex Head Cap, GR5 Was 91694
30 7011791 2 RETAINER, 5/16” Bolt
31 7091264 2 BOLT, 5/16-18 x 1-3/4” Hex Flange Lock, GR5
32 7028326 1 TIE ROD, Reduced Radius
33 7091302 2 NUT, 3/8-16 Hex , GR5 or B
34 7091497 2 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR5
35 7091320 2 WASHER,3/8” Split Lock

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

19

TP 400-5015-6-TC-N

FRAME, CLUTCH, BRAKE & STEERING COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

20

SERIES H & I

FRAME, CLUTCH, BRAKE & STEERING COMPONENTS

p

y

Part No Descri

1 7073345 1 FRAME, Tractor (I piece)

- 7075079 1 FRAME, Tractor (I piece) used on Series “I” Models

2 7014451 1 CABLE TIE, 3.19
3 7027936 2 ROD END, Pump Control Linkage, 3/8-24 thread
4 7090482 2 NUT, 3/8-24 Hex Jam
5 7090163 2 SCREW, 3/8-24 x 1-1/4” Square Neck Carriage
6 7028420 1 DRAGLINK
7 7024180 3 SPACER, Tie Rod
8 7091619 1 NUT, 3/8-16 Hex Flange Lock Was 90613
9 7053568 1 ASSEMBLY, Steering Sector (Includes 41267, Weldment & item

10)
10 7012706 2 BEARING, Sleeve, .875 0.D. x .75
11 7031036 1 THRUST WASHER
12 7091584 6 NUT, 1/4-20 Hex Flange Lock Was 90583
13 7022381 2 SHOULDER BOLT, 1/2-13 thread
14 7090975 1 NUT, 1/2-13 Hex Center Lock, GR A
15 7072636 1 BRACE, Sector Gear
16 7012080 1 CABLE TIE, 7”
17 7091601 4 NUT, 5/16-18 Hex Flange Lock, GR5 Was 90585
18 7022743 1 PEDAL, Clutch/Brake
19 7012661 1 PEDAL PAD
20 7091299 1 NUT, 3/8-16-3B Hex Nyloc
21 7090122 2 WASHER, 3/8” Flat SAE
22 7024381 1 SPRING, Brake
23 7028037 1 SWIVEL, Inline Brake Arm
24 7091593 6 COTTER PIN, 3/8 x 1-7/32” Self Lock
25 7091575 2 NUT, 5/16-18 Hex Center Lock, GR5 or B
26 7092031 1 NUT, 5/16-24 Hex Jam
27 7090517 1 WASHER, .44” I.D. Flat Was 91300
28 7058339 1 WELDMENT, Brake Bellcrank
29 - 1 ARM, Speed Control (Component of Transaxle, see

Transmission Page)
30 7072369 1 ROD, Brake- K46
31 7090188 1 WASHER, 5/16 x .11/16 x .08 Flat
32 7046782 1 SPRING, Rectangular Wire Die, Blue
33 7032070 2 WASHER, 13/32 x 3/4” Flat
34 7073607 1 SWIVEL, Shift Linkage- PM
35 7092058 1 NUT, 5/16-24 Hex Nyloc
36 7072626 1 CABLE, Clutch/Brake- K46

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

21

TP 400-5015-6-TC-N

FRAME, CLUTCH, BRAKE & STEERING COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

22

SERIES H & I

FRAME, CLUTCH, BRAKE & STEERING COMPONENTS

p

y

Part No Descri

37 7052431 1 ASSEMBLY, Pivot-Foot Shaft (Includes item 38)
38 7013864 1 LUBE FITTING, Straight (press-fit for .187 dia. Hole)
39 7090509 1 WASHER, 1/2” Internal Tooth Lock
40 7090619 1 NUT, 1/2-13 Hex Flange Lock
41 7027344 2 WASHER, .64 x .99 x .05 Flat Was 15992
42 7023645 1 PIN, 3/16 x 1-1/2” Clevis
43 7022742 1 BEARING, Flange
44 7041236 1 ASSEMBLY, Clutch/Brake Arm
45 7041244 1 WELDMENT, Parking Brake, OPPLT
46 7090361 3 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
47 7090803 6 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, GR2
48 7091240 2 SCREW, #10-32 x 5/8” Hex Washer Head Machine, GR5
49 7011016 2 BUSHING, 1/2” Nylon
50 7091587 2 WASHER, .531 x 1.062 x .121 Flat SAE
51 7014341 3 RING, 1/2” External Retaining
52 7091001 5 SCREW, 5/16-18 x 5/8” Truss Head (Torx)
53 7090122 3 WASHER, 3/8" Flat Was 91514
54 7072298 1 BRACKET, Pivot Mounting
55 7023649 2 WASHER, 5/16 Nylon
56 7072403 1 KNOB, Brake/Clutch- 5/16-18 thread
57 7091302 1 NUT, 3/8-16 Hex , GR5 or B
58 7033557 1 ARM, Idler-Traction Drive
59 7090376 2 NUT, #10-32 Hex Nyloc
60 7023355 1 SWITCH- DPDT
61 7024383 1 SPRING, Traction Drive

62A 7034410 1 BRACKET, Rear Lift/PTO Lever, Extruded
62B 7047068 1 *BRACKET, Rear Lift/PTO Lever, Extruded (not shown)
63A 7034850 1 LINK, Lift used on LT160H42HBV,

63B 7046758 1 *LINK, Lift (not shown) used on 48” Series “

64 7034384 2 SPACER, .515 x .688 x .403

65A 7033520 1 BRACKET, Deck Hang Pivot
65B 7047055 1 *BRACKET, Rear Hanger- LH (not shown)
66A 7041256 1 WELDMENT, Rear Lift Arm, 38/42
66B 7047052 1 *WELDMENT, Rear Lift (not shown)

67 7091000 2 SCREW, 5/16-18 x 7/8” Truss Head (Torx)
68 7034377 2 SECTOR, Lift Plate
69 7034326 1 EXTENSION, Idler Arm
70 7091560 1 SCREW, 3/8-16 x 2-1/4” Hex Head Cap, GR5

tionItem Qt

Note

LT160H42HBV2 & 42” Series “I”
Models

H” & “I” Models

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

23

TP 400-5015-6-TC-N

FRAME, CLUTCH, BRAKE & STEERING COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

24

SERIES H & I

FRAME, CLUTCH, BRAKE & STEERING COMPONENTS

p

y

Part No Descri

71 7023954 1 PULLEY, 3.47 O.D. Flat Idler
72 7033556 2 BELT GUIDE, 3-1/2” Dia.
73 7091320 1 WASHER,3/8” Split Lock
74 7047072 1 *BRACKET, Frame Brace
75 7090731 2 *BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR5
76 7091541 2 *SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap Was 90368
77 7091593 1 *PIN, 3/8 Self Lock Cotter Was 24159
78 7072598 1 BRACKET, Mounting Brace
79 7090316 2 BOLT, 5/16-18 x 3/4” Square Neck Carriage GR5 Was 91097
80 7091497 1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR5
81 7024344 1 PULLEY, Idler V, 3.30 HA
82 7091585 1 NUT, 3/8-16 Hex Center Lock, GR5 or B
83 7027139 1 ROD END, Pump Control Linkage, 5/16-24 thread
84 7073608 1 ROD, Shift Linkage
85 7091540 1 SCREW, 5/16-18 x 1-1/2” Hex Head Cap, GR5 Was 91066
86 7029973 1 SPACER, .38 I.D. x .56 O.D. x .75 thick
87 7091575 1 NUT, 5/16-18 Hex Center Lock, GR5 or B
88 7024604 1 SHOULDER BOLT, 1/2-13 thread x 3”

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

25

TP 400-5015-6-TC-N

TRANSMISSION GROUP (Hydro Drive)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

26

SERIES H & I

TRANSMISSION GROUP (Hydro Drive)

p

y

Part No Descri

1 7074398 1 ASSEMBLY, Transaxle-Tuff Torq, hand control K46 Hydro
2 7072387 1 ROD, Roll Release- K46
3 7091708 1 PIN, 1/4 x 5/8” Clevis
4 7091294 2 WASHER, 1/4 x 5/8 x 1/16” Flat Was 90055
5 7091597 1 PIN, 3/32 x 1/2” Cotter Was 90555
6 7072601 1 BRACKET, Torque/Spool- TTK46
7 7027174 1 SCREW, 5/16-18 x 2” Hex Head Cap, GR5
8 7090188 2 WASHER, 5/16 x 11/16 x 1/16” Flat, GR5 Was 91296

9 7091298 1 NUT, 5/16-18-3B Hex Nyloc
10 7091830 4 SCREW, 5/16-18 x 3” Hex Head Cap, GR5
11 7091675 4 WASHER, .34 x 1.0 x .09 Flat
12 7073613 4 SPACER, Hydro Axle- Steel- K46
13 7091601 4 NUT, 5/16-18 Hex Flange Lock, GR5
14 7072884 2 WASHER, Axle- TT K46 Hydro
15 7031036 2 THRUST WASHER
16 7072385 2 SPACER, Axle- K46
17 7073757 1 SNAP RING, Special (Kanzaki # 192154-89090) 1
18 7073753 1 FAN (Vendor # 1A640-83050)
19 7073800 1 PULLEY, 4” Diameter (Vendor # 1A6460-25333)
20 7073754 1 WASHER, Wave (Vendor # 1A6460-83060)
21 7073747 1 SPACER (Vendor # 1A6460-25300)
22 7073834 1 BELT, Traction Drive (HA Section, 96.60” effective length)
23 7072386 2 KEY, 3/16” Square x 2-3/16” long
24 7090391 1 WASHER, 5/16” Internal Tooth Lock

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

27

TP 400-5015-6-TC-N

HYDRO RESERVOIR ASSEMBLY

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

28

SERIES H & I

HYDRO RESERVOIR ASSEMBLY

p

y

Part No Descri

1 7072739 1 BRACKET, Reservoir Mounting

2 7072736 1 RESERVOIR, Expansion- TTK46 Hydro

3 7016130 2 CLAMP 13/16”

4 7072901 1 HOSE, Hydraulic-(4-1/2” long) TTK46 Hydro

5 7091431 1 VALVE, Vent

6 7090858 2 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap

7 7072914 1 CABLE TIE - 10 x 1/4 x .083 thick

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

29

TP 400-5015-6-TC-N

BLADE ENGAGEMENT & TRANSMISSION CONTROLS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

30

SERIES H & I

BLADE ENGAGEMENT & TRANSMISSION CONTROLS

p

y

Part No Descri

1 7073345 1 FRAME, Tractor (I piece)

-- 7075709 1 FRAME, Tractor (I piece) used on Series “I” Models

2 7046899 1 BRACE, Frame 48” Deck only

3 7091588 8 BOLT, 3/8-16 x 3/4” Hex Flange Lock Was 90612 (48” Deck only)

4 7046900 1 BELT GUIDE 48” Deck only

5 7091598 1 PIN, 1/8 x 3/4” Cotter

6 7014296 1 SHIM WASHER, .50 x .75 x .03

7 7091573 1 BOLT, 1/4-20 x 5/8” Short Neck Carriage, GR 5

8 7052562 1 ASSEMBLY, Steering Adjuster

9 7091584 1 NUT, 1/4-20 Hex Flange Lock
10 7022368 1 GEAR, Pinion, Steering
11 7058874 1 WELDMENT, Shift Handle- TTK46
12 7091508 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
13 7023656 1 LEVER Shift Handle
14 7019245 1 BUSHING, 3/4 - 1.62 Flange
15 7031036 1 THRUST WASHER
16 7010754 1 SPRING, Shift Detent
17 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR 5
18 7091597 1 PIN, 3/32 x 3/4” Cotter Was 90037
19 7091497 1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR 5
20 7090122 1 WASHER, 3/8” Flat Was 91514
21 7024344 1 PULLEY, Idler V, 3.30 HA
22 7033556 1 BELT GUIDE, 3-1/2” Dia.
23 7091524 3 SCREW, 5/16-18 x 1-1/4” Swage
24 7035524 1 SUPPORT, PTO Lever
25 7091585 2 NUT, 3/8-16 Hex Center Lock, GR 5 or B
26 7040598 1 WELDMENT, Arm
27 7091506 4 SCREW, 5/16-18 x 1-1/2” Hex Washer Self-Tap
28 7023914 1 PIN, 1/4 x 1-5/8” Clevis
29 7090361 7 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap 48” Deck only
30 7091619 8 NUT, 3/8-16 Hex Flange Lock Was 90613 (48” Deck only)
31 7072755 1 DECAL, Instructions Frame Top Electric Clutch
32 7073611 2 FOOT PAD, Textured (Black) replaces 28203
33 7028620 2 SPACER, .340 I.D. x .63 O.D. x .310 thick
34 7090505 2 NUT, 5/16-18 Hex Flange Lock, GR 5

35A 7059045 1 WELDMENT, Anti-Spin/Belt Guide-42 used on 42” “H” Series & all “I”

35B 7059042 1 WELDMENT, Anti-Spin/Belt Guide used on 48” Deck, “H” Series

tionItem Qt

Note

Series

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

31

TP 400-5015-6-TC-N

BLADE ENGAGEMENT & TRANSMISSION CONTROLS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

32

SERIES H & I

BLADE ENGAGEMENT & TRANSMISSION CONTROLS

p

y

Part No Descri

36 7024616 2 BUSHING, Flange
37 7033488 1 BRACKET, Hood Pivot
38 7028630 1 WIRE CLIP, .28 x .41
39 7090209 2 SCREW, 5/16-18 x 1” Hex Head Cap, GR 2
40 7019246 1 BUSHING, 3/4 - I” Flange (nylon)
41 7058876 1 WELDMENT, Pivot Plate
42 7073835 2 HEAT SHIELD, (Foot Rest)
43 7033825 1 ANCHOR, Blade Brake
44 7075130 1 PIN, .31 O.D. x 3/4”
45 7091575 1 NUT, 5/16-18 Hex Center Lock, GR 5 or B

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

33

TP 400-5015-6-TC-N

IMPLEMENT LIFT PARTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

34

SERIES H & I

IMPLEMENT LIFT PARTS

p

y

Part No Descri

1A 7041655 1 WELDMENT, Lift Lever-33/42 used on 42” Deck Series “H” & “I”

1B 7058258 1 WELDMENT, Lift Lever-48 used on 48” Deck Series “H” & “I”

2 7022565 1 ROD, Lift Lever

3 7019363 1 KNOB, Lift Handle

4 7014361 1 CAP, Lift Rod

5 7033449 1 QUADRANT, Lift Lever

6 7091000 2 SCREW, 5/16-18 x 7/8” Truss Head (Torx)

7 7091001 1 SCREW, 5/16-18 x 5/8” Truss Head (Torx)

8 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR5 Was 90585

9 7022567 1 PIVOT, Lift Lever

10A 7041255 1 WELDMENT, Bellcrank, 30/38/42 used on 42” Deck Series “H” & “I”

10B 7047137 1 WELDMENT, Bellcrank used on 48” Deck Series “H” & “I”

11 7022566 1 SPRING, Latch Detent
12 7091596 2 COTTER HAIR PIN, 2-5/8” Was 13844
13 7022895 1 PIN, Dowel, .25 x 1.12
14 7022568 1 DETENT, Lift Lever
15 7090999 1 SCREW, 1/4-20 x 5/8 Pan Head Self-Tap (Torx)
16 7024742 1 PIVOT, Latch Detent
17 7091587 1 WASHER, .531 x 1.062 x .121 Flat SAE
18 7090122 1 WASHER, 3/8” Flat SAE
19 7091597 1 PIN, 3/32 x 3/4” Cotter

tionItem Qt

Note

Models

Models (not shown)

Models

Models (not shown)

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

35

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.1 (Model LT160H42HBV)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

36

SERIES H & I

ENGINE COMPONENTS, PT.1 (Model LT160H42HBV)

p

y

Part No Descri

1 -- 1 ENGINE, B&S 16 HP OHV, Mod 28Q777, Type 0679, Trim E1

2 7025079 1 CLIP, Speed (250 RPM Briggs)

3 7027972 1 ASSEMBLY, Oil Valve

4 7091581 3 SCREW, #8-18 x 1/2” Hex Head Sheet Metal

5 7041537 1 WELDMENT, Muffler Deflrctor

6 7041269 1 HEAT SHIELD, Muffler (weldment)

7 7026482 1 CLIP, “J” Open Type .4 Bundle Dia., .281 Dia. Hole

8 7029900 2 CLAMP, .490 x .31

9 7029982 1 FUEL LINE, 14” long used on Series “H” Models

-- 7032956 1 FUEL LINE, 10” long used on Series “I” Models
10 7091511 4 NUT, 5/16-18 Hex, GR5 or B
11 7091315 4 WASHER, 5/16” Split Lock
12 7090188 5 WASHER, 5/16” Flat Was 91296
13 7015861 2 HARNESS CLIP, Cushioned
14 7090669 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR5
15 7073799 1 PULLEY, Traction Drive
16 7091301 1 WASHER, 7/16” Split Lock
17 7016755 1 KEY, 1/4 Square x 3/4”
18 7091579 2 SCREW, 1/4-20 x 1/2” Hex Flange Lock
19 7091703 1 SCREW, 7/16-20 x 2-1/2” (Special), GR5
20 7053740 1 CLUTCH/BRAKE
21 7090391 1 WASHER, 5/16” Internal Tooth Lock
22 7073231 1 DECAL, Warning-Speed Setting 14, 16, & 18 HP ENGINES

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

37

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.2 (Model LT160H42HBV2)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

38

SERIES H & I

ENGINE COMPONENTS, PT.2 (Model LT160H42HBV2)

p

y

Part No Descri

1 -- 1 ENGINE, B&S 16 HP V-Twin, Mod 303777, Type 1163, Trim E1
2 7024241 1 MUFFLER, 16HP B&S
3 7014509 1 GASKET, Exhaust
4 7041742 1 MANIFOLD, Exhaust
5 7027972 1 ASSEMBLY, Oil Valve
6 7022486 1 EXTENSION, Oil Drain
7 7026778 1 DEFLECTOR, Exhaust (Direct Out)
8 7034767 1 SHIELD, Muffler Heat

9 7024161 2 SHOULDER BOLT, 5/16-18 thread x 4”
10 7024566 1 SCREW LOCK
11 7091581 4 SCREW, #8-18 x 1/2” Hex Head Sheet Metal
12 7090858 4 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
13 7029900 2 CLAMP, .490 x .31
14 7029982 1 FUEL LINE, 14” long
15 7091601 1 NUT, 5/16-18 Hex Flange Lock, GR5
16 7034767 1 SHIELD, Heat
17 7090669 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR5
18 7090188 4 WASHER, 5/16” Flat Was 91296
19 7091315 2 WASHER, 5/16” Split Lock
20 7091511 2 NUT, 5/16-18 Hex, GR5 or B
21 7016755 1 KEY, 1/4 Square x 3/4”
22 7073799 1 PULLEY, Traction Drive
23 7053740 1 CLUTCH/BRAKE
24 7073231 1 DECAL, Warning-Speed Setting 14, 16, & 18 HP ENGINES
25 7090072 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR5 Was 27172
26 7091584 2 NUT, 1/4-20 Hex Flange Lock
27 7091703 1 SCREW, 7/16-20 x 2-1/2” (Special), GR5
28 7090209 2 SCREW, 5/16-18 x 1” Hex Head Cap, GR2
29 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR5 Was 90585
30 7091301 1 WASHER, 7/16” Split Lock

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

39

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.3 (Model LT18H Models)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

40

SERIES H & I

ENGINE COMPONENTS, PT.3 (Model LT18H Models)

p

y

Part No Descri

1 -- 1 ENGINE, B&S 20 HP V-Twin Mod 350777, Type 1143, Trim E1 covered on this page:

-- -- 1 ENGINE, B&S 18 HP V-Twin Mod 40F777, Type 0111,1 Trim E1

-- -- 1 ENGINE, B&S 18 HP Intek Mod 31H777, Type 0117, Trim E1

2 7024241 1 MUFFLER, 16HP B&S (shown)

-- 7074826 1 MUFFLER, 14.5HP Briggs Engine for B&S 14-1/2 & 15HP engines

3 7014509 1 GASKET, Muffler/Exhaust (1.18” I.D.; 1.88” hole centers) used on Series “H” Models

-- 7063283 1 GASKET, Muffler/Exhaust, 20 HP Intec (1.00” I.D.; 1.968” hole
centers)

4A 7041742 1 MANIFOLD, Exhaust used on Series “H” Models
4B 7042558 1 WELDMENT, Manifold 16HP used on Series “I” Models

5 7027972 1 ASSEMBLY, Oil Valve
6 7022486 1 EXTENSION, Oil Drain

7 7026778 1 DEFLECTOR, Exhaust (Direct Out)
8A 7034767 1 SHIELD, Muffler/Heat used on Series “H” Models
8B 7075088 1 SHIELD, Muffler/Heat used on Series “I” Models

9 7024161 2 SHOULDER BOLT, 5/16-18 thread x 4”
10 7024566 1 SCREW LOCK
11 7091581 4 SCREW, #8-18 x 1/2” Hex Head Sheet Metal
12 7090858 4 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
13 7029900 2 CLAMP, .490 x .31
14 7029982 1 FUEL LINE, 14” long used on Series “H” Models

-- 7032956 1 FUEL LINE, 10” long used on Series “I” Models

-- 7035853 1 FUEL LINE, 3-3/4” long used on Series “I” Models
15 7091601 5 NUT, 5/16-18 Hex Flange Lock, GR 5
16 7091301 1 WASHER, 7/16” Split Lock
17 7090669 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
18 7090188 4 WASHER, 5/16” Flat Was 91296
19 7091315 2 WASHER, 5/16” Split Lock
20 7091511 2 NUT, 5/16-18 Hex, GR 5 or B
21 7016755 1 KEY, 1/4” Square x 3/4” long used on Series “H” Models

-- 7091033 1 KEY, 1/4 Square x 1-3/4” used on Series “I” Models
22 7073799 1 PULLEY, Traction Drive used on Series “H” Models

-- 7075034 1 PULLEY, Traction Drive 42&48 TT K46 used on Series “I” Models
23 7053740 1 CLUTCH/BRAKE used on Series “H” Models

-- 7075085 1 ELECTRIC CLUTCH, Ogura MA-GT-DX11CU used on Series “I” Models
24 7034762 1 SHIELD, Muffler/Heat, B&S 16HP
25 7090072 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5 Was 27172
26 7091584 2 NUT, 1/4-20 Hex Flange Lock

tionItem Qt

Note

LT180H42IBV, IBV2,
WLT180H42IBV2 &
LT180H48HBV2

only; similar to 24241 but with
long standoff bkt.

used on Series “I” Models

Footnotes:

Purchase engine & engine parts other than those listed, from engine service outlets.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

41

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.3 (Model LT18H Models)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

42

SERIES H & I

ENGINE COMPONENTS, PT.3 (Model LT18H Models)

p

y

Part No Descri

27 7091703 1 SCREW, 7/16-20 x 2-1/2” (Special), GR 5
28 7090209 2 SCREW, 5/16-18 x 1” Hex Head Cap, GR 2
29 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 90585
30 7073231 1 DECAL, Warning-Speed Setting 14, 16, & 18 HP ENGINES
31 7091811 4 BOLT, 5/16-18 x 5/8” Hex Flange Lock
32 7026746 1 TRIM, Heat Shield (2” long)

-- 7075171 1 TRIM-Heat Shield (3” long)
33 7075070 1 PLATE, Engine- Briggs Engine
34 7026482 1 CLIP, “J” Open Type .4 Bundle Dia., .281 Dia. Hole
35 7075120 1 HEAT SHIELD, B&S V-Twin Engine
36 7090324 2 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
37 7091315 2 WASHER, 5/16” Split Lock
38 7029138 1 WASHER, 7/16 I.D. x 1-1/2” O.D. x .188 thick
39 7041537 1 WELDMENT, Muffler Deflector
40 7071756 1 ADAPTER, Muffler
41 7015352 1 GASKET, Exhaust (1.25” I.D.; 1.875” hole centers)

tionItem Qt

Note

Footnotes:

Purchase engine & engine parts other than those listed, from engine service outlets.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

43

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.4 (Model LT200H Models)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

44

SERIES H & I

ENGINE COMPONENTS, PT.4 (Model LT200H Models)

p

y

Part No Descri

1 -- 1 ENGINE, B&S 20 HP Intec, Mod 40G777, Type 0112, Trim E1 used on LT200H42IBV2,

2 7024241 1 MUFFLER, 16HP B&S
3 7014509 1 GASKET, Muffler/Exhaust (1.18” I.D.; 1.88” hole centers)

-- 7063283 1 GASKET, Muffler/Exhaust, 20 HP Intec (1.00” I.D.; 1.968” hole centers)

4 7042558 1 WELDMENT, Manifold 16HP
5 7027972 1 ASSEMBLY, Oil Valve
6 7022486 1 EXTENSION, Oil Drain
7 7026778 1 DEFLECTOR, Exhaust (Direct Out)
8 7075088 1 SHIELD, Muffler/Heat

9 7024161 2 SHOULDER BOLT, 5/16-18 thread x 4”
10 7024566 1 SCREW LOCK
11 7091581 4 SCREW, #8-18 x 1/2” Hex Head Sheet Metal
12 7090858 4 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
13 7029900 2 CLAMP, .490 x .31
14 7032956 1 FUEL LINE, 10” long

-- 7035853 1 FUEL LINE, 3-3/4” long
15 7091601 5 NUT, 5/16-18 Hex Flange Lock, GR 5
16 7091301 1 WASHER, 7/16” Split Lock
17 7090669 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5 or 91264
18 7090188 4 WASHER, 5/16” Flat Was 91296
19 7091315 2 WASHER, 5/16” Split Lock
20 7091511 2 NUT, 5/16-18 Hex, GR 5 or B
21 7091033 1 KEY, 1/4 Square x 1-3/4”
22 7075034 1 PULLEY, Traction Drive 42&48 TT K46
23 7075085 1 ELECTRIC CLUTCH, Ogura MA-GT-DX11CU
24 7034762 1 SHIELD, Muffler/Heat, B&S 16HP
25 7090072 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5 Was 27172
26 7091584 2 NUT, 1/4-20 Hex Flange Lock
27 7091703 1 SCREW, 7/16-20 x 2-1/2” (Special), GR 5
28 7090209 2 SCREW, 5/16-18 x 1” Hex Head Cap, GR 2
29 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 90585
30 7073231 1 DECAL, Warning-Speed Setting 14, 16, & 18 HP ENGINES
31 7091811 4 BOLT, 5/16-18 x 5/8” Hex Flange Lock
32 7026746 1 TRIM, Heat Shield (2” long)

-- 7075171 1 TRIM-Heat Shield (3” long)
33 7075070 1 PLATE, Engine- Briggs Engine
34 7026482 1 CLIP, “J” Open Type .4 Bundle Dia., .281 Dia. Hole

tionItem Qt

Note

LT200H48IBV2 &
WLT200H48IBV2 Models

Footnotes:

Purchase engine & engine parts other than those listed, from engine service outlets.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

45

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.4 (Model LT200H Models)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

46

SERIES H & I

ENGINE COMPONENTS, PT.4 (Model LT200H Models)

p

y

Part No Descri

35 7075120 1 HEAT SHIELD, B&S V-Twin Engine
36 7090324 2 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
37 7091315 2 WASHER, 5/16” Split Lock
38 7029138 1 WASHER, 7/16” I.D. x 1-1/2” O.D. x .188 thick

tionItem Qt

Note

Footnotes:

Purchase engine & engine parts other than those listed, from engine service outlets.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

47

TP 400-5015-6-TC-N

ENGINE COMPONENTS, PT.5 (Model LT160H42IBV)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

48

SERIES H & I

ENGINE COMPONENTS, PT.5 (Model LT160H42IBV)

p

y

Part No Descri

1 -- 1 ENGINE, B&S 17 HP Intek Mod 31F777, Type 0111, Trim

2 7074826 1 MUFFLER, 14.5HP Briggs Engine
3 7015352 1 GASKET, Exhaust (1.25” I.D.; 1.875” hole centers)
4 7071756 1 ADAPTER, Muffler
5 7027972 1 ASSEMBLY, Oil Valve
6 7075070 1 PLATE, Engine- Briggs Engine

7 7041537 1 WELDMENT, Muffler Deflrctor
8A 7044824 1 WELDMENT, Heat Shield-Muffler- 17HP Intek B&S Dim. “A” 1.38”
8B 7041340 1 HEAT SHIELD, Muffler- 15HP B&S Dim. “A” 2.63” (used on

9 7075171 1 TRIM-Heat Shield (3” long)

10A 7075431 1 HEAT SHIELD, Manifold 17HP B&S
10B 7075065 1 HEAT SHIELD, Manifold 15HP B&S (used on LT180H42IBV)

11 7024566 1 SCREW LOCK
12 7091581 4 SCREW, #8-18 x 1/2” Hex Head Sheet Metal
13 7029900 2 CLAMP, .490 x .31
14 7075472 1 FUEL LINE, 29” long
15 7024161 2 SHOULDER BOLT, 5/16-18 thread x 4”
16 7091301 1 WASHER, 7/16” Split Lock
17 7091122 3 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
18 7091579 1 SCREW, 1/4-20 x 1/2” Hex Flange Lock
19 7091315 2 WASHER, 5/16” Split Lock
20 7091511 2 NUT, 5/16-18 Hex, GR 5 or B
21 7091033 1 KEY, 1/4 Square x 1-3/4”
22 7075034 1 PULLEY, Traction Drive 42&48 TT K46
23 7075085 1 ELECTRIC CLUTCH, Ogura MA-GT-DX11CU (Series “I”)
24 7029138 1 WASHER, 7/16 I.D. x 1-1/2” O.D. x .188 thick
25 7091264 2 BOLT, 5/16-18 x 1-3/4” Hex Flange Lock, GR 5
26 7090188 4 WASHER, 5/16” Flat Was 91296
27 7091703 1 SCREW, 7/16-20 x 2-1/2” (Special), GR 5
28 7090324 2 SCREW, 3/8-16 x 1” Hex Washer Self-Tap

tionItem Qt

Note

E1

LT180H42IBV) replaces 44824

replaces 75431

Footnotes:

Purchase engine & engine parts other than those listed, from engine service outlets.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

49

TP 400-5015-6-TC-N

42" CUTTING DECK ASSEMBLY

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

50

SERIES H & I

42" CUTTING DECK ASSEMBLY

p

y

Part No Descri

1A 7054168 1 ASSEMBLY, 42” Cutting Deck (Includes Decal items 44 & 49) used on LT160H42HBV Model
1B 7054170 1 ASSEMBLY, 42” Cutting Deck (Includes Decal items 44 & 49) used on LT160H42HBV2 Model

1C 7058129 1 ASSEMBLY, 42” Cutting Deck (Includes Decal item 3 & 46720) used on 42” Series “I” Models

2 7051401 1 DEFLECTOR, Side Discharge (Includes item 3)

3 7013010 1 DECAL, Danger, Cut Finger

4 7029265 4 SHOULDER BOLT, 3/8-16 thread

5 7091049 4 WING-NUT, 3/8-16

6 7029264 4 WHEEL, Gage

7 7091585 4 NUT, 3/8-16 Hex Center Lock, GR5 or B

8 7091601 10 NUT, 5/16-18 Hex Flange Lock, GR5 Was 90585

9 7023606 2 VINYL CAP
10 7051747 2 ASSEMBLY, Spindle Lock
11 7091547 12 BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR2 Was 90850
12 7042578 1 WELDMENT, Bracket, Sector Lift - Right Side

12A 7042609 1 WELDMENT, Bracket, Sector Lift - Right Side used on LT160H42GBV2 & 42”

13 7090517 4 WASHER, 3/8” Flat Was 90600
14 7090122 2 WASHER, 3/8” SAE Flat
15 7032297 1 BRACKET, Front Hanger- Left Hand
16 7091619 15 NUT, 3/8-16 Hex Flange Lock Was 90613
17 7038043 1 BRACKET, Front Lift Arm Hanger
18 7091567 1 TEE-NUT, 5/16-18
19 7027198 2 BOLT, 3/8-16 x 1” Hex Flange Lock, GR5
20 7052487 2 ASSEMBLY, Spindle Brace
21 7034409 2 GUARD, Pulley
22 7091304 1 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 Was 90563
23 7015012 1 ADJUSTMENT RING
24 7091302 2 NUT, 3/8-16 Hex Was 90130
25 7090118 3 WASHER, 3/8” Split Lock
26 7038382 1 BRACKET, Front (Right Side)
27 7032432 1 ADJUSTMENT & LINK
28 7090122 2 WASHER, 3/8” SAE Flat
29 7027471 1 PIN, Deck Hanger Improved
30 7022893 1 CABLE, Deck Lift 4.75
31 7032276 1 CLEVIS, Lift Cable
32 7091503 1 HAIR PIN, 3/32 x 1-1/2”
33 7029687 1 PIN, 3/8 x 1-1/16” Clevis
34 7091596 2 HAIRPIN, .148 x 2.62

tionItem Qt

Note

Series “I”

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

51

TP 400-5015-6-TC-N

42" CUTTING DECK ASSEMBLY

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

52

SERIES H & I

42" CUTTING DECK ASSEMBLY

p

y

Part No Descri

35 7042469 1 WELDMENT, Front Lift Arm, 42 replaces 41480
36 7091585 1 NUT, 3/8-16 Hex Center Lock, GR5 or B
37 7053567 1 ASSEMBLY, Idler Mount Bracket
38 7028942 1 SLEEVE, .5 O.D. x .404 I.D. x .38
39 7018574 1 IDLER, 4.12 Flat
40 7090614 1 BOLT, 3/8-16 x 1-1/2” Hex Flange Lock, GR5
41 7074467 2 NUT, 3/4-16 Hex Flange Jam, GR8
42 7024863 2 PULLEY-5.25 O.D.
43 7024910 1 DECAL - 42 Inch
44 7014852 1 DECAL, Caution (Rotating Blade)
45 7042607 1 WELDMENT, Sector Lift, Left Hand- 42”
45 7042606 1 WELDMENT, Sector Lift, Left Hand- 42” used on LT160H42HBV2 & 42”

46 7014407 2 WASHER, Spindle
47 7091580 1 BOLT, 3/8-16 x 1-3/4” Hex Flange Lock, GR5
48 7091601 3 NUT, 5/16-18 Hex Flange Lock, GR5
49 7014852 1 DECAL, Caution (Deflector in Place) used on Series “H” Models

49B 7046720 1 DECAL, Chute/Deflector used on Series “I” Models

50 7091588 12 BOLT, 3/8-16 x 3/4” Hex Flange Lock Was 90612
51 7026691 2 BLADE, 21” Standard Lift
52 7012063 4 WASHER, Cone, 13/32 x 1-13/32” Diameter
53 7090824 2 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR5
54 7091303 2 BOLT, 5/16-18 x 1” Short Neck Carriage, GR5
55 7090799 2 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
56 7091503 2 HAIR PIN, 3/32 x 1.5”
57 7011791 2 RETAINER, 5/16” Bolt
58 7091315 2 WASHER, 5/16” Split Lock
59 7091537 2 WING LOCKNUT, 5/16-18
60 7051914 2 ASSEMBLY, Spindle Housing, 42” Deck Was 59723
61 7034202 1 PLATE, Support
62 7027168 2 SCREW, 5/16-18 x 1” Hex Head Cap, GR5 Was 90636
63 7035835 4 POST Anti-Scalp
64 7091328 4 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR5

tionItem Qt

Note

Series “I”

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

53

TP 400-5015-6-TC-N

BELT, BLADE BRAKE- 42" CUTTING DECK

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

54

SERIES H & I

BELT, BLADE BRAKE- 42" CUTTING DECK

p

y

Part No Descri

1 7029205 1 BELT, Drive, HA Sect. 100.0” effective length used on Series “H” Models

-- 7072465 1 BELT, Drive, HB Sect. 103.36” effective length (was 72349) used on Series “I” Models

2 7074467 1 NUT, 3/4-16 Hex Flange Jam, GR8

3 7024863 1 PULLEY-5.25 O.D.

4 7091580 1 BOLT, 3/8-16 x 1-3/4” Hex Flange Lock, GR5

5 7018574 1 IDLER, 4.12 Flat used on Series “H” Models

-- 7075707 1 IDLER- Flat (4.00 O.D.) used on Series “I” Models;

6 7010740 2 RING, 2” External Retaining

7 7036222 1 BRAKE ARM

8 7014407 1 WASHER, Spindle

9 7091585 1 NUT, 3/8-16 Hex Center Lock, GR5 or B
10 7028941 1 SPRING, Extension 1.18 O.D. x 6.8

tionItem Qt

Note

replaces 72613

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

55

TP 400-5015-6-TC-N

SPINDLE ASSEMBLY- 42" CUTTING DECK

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

56

SERIES H & I

SPINDLE ASSEMBLY- 42" CUTTING DECK

p

y

Part No Descri

1 7051914 2 ASSEMBLY, Spindle Housing, 42” Deck (Includes items 2 thru 7) Was 59723 (Used on

2 7012491 2 RING, 1-3/4” Retaining

3 7013313 2 BALL BEARING, 3/4” I.D.

4 7051918 1 WELDMENT, Spindle Housing Was 47917

5 7032294 1 BLADE HOLDER

6 7014407 1 WASHER, Spindle

7 7027668 1 SHAFT, Spindle (6.5” long)

tionItem Qt

Note

LT160H42HBV,
LT160H42HBV3,
LT180H42IBV2 &
WLT180H42IBV2)

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

57

TP 400-5015-6-TC-N

48" CUTTING DECK ASSEMBLY (Series "H") PT.1

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

58

SERIES H & I

48" CUTTING DECK ASSEMBLY (Series "H") PT.1

p

y

Part No Descri

1 7013864 4 LUBE FITTING, Straight (press-fit for .187 dia. Hole)

2 7091328 1 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR5 Was 90143

3 7029265 1 SHOULDER BOLT, 3/8-16 thread

4 7063297 1 WELDMENT, 48” Deck Was 46611

5 7046860 2 BRACKET, Rear Lift- 48” Deck

6 7046864 1 BRACKET, Front Hanger- Right Hand

7 7046865 1 BRACKET, Front Hanger- Left Hand

8 7046870 1 BRACKET, Front Hanger- 48” Deck

9 7046929 1 STIFFENER, 48” Deck
10 7046947 2 WELDMENT, Idler Plate
11 7054142 1 ASSEMBLY, Front Lift Arm- 97 Model Year (Incl. items 12 thru

16)
12 7042602 1 WELDMENT, Front Lift Arm
13 7035603 1 ARM, Lift
14 7012063 1 WASHER, Cone, 13/32 x 1-13/32” Diameter
15 7091302 1 NUT, 3/8-16 Hex Was 90130
16 7091790 1 BOLT, 3/8-16 x 1-1/4” Square Neck Carriage, GR5 Was 91716
17 7091601 8 NUT, 5/16-18 Hex Flange Lock, GR5
18 7091619 11 NUT, 3/8-16 Hex Flange Lock Was 90613
19 7090799 8 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
20 7091547 12 BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR2 Was 90850
21 7091298 1 NUT, 5/16-18-3B Hex Nyloc
22 7091299 8 NUT, 3/8-16-3B Hex Nyloc
23 7091304 6 SCREW, 3/8-16 x 1” Hex Head Cap, GR5
24 7058119 1 BRACKET, Hinge

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

59

TP 400-5015-6-TC-N

48" CUTTING DECK ASSEMBLY (Series "H") PT.2

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

60

SERIES H & I

48" CUTTING DECK ASSEMBLY (Series "H") PT.2

p

y

Part No Descri

1 7057821 1 ASSEMBLY, 48” Deck (see previous page)
2 7057921 1 ASSEMBLY, 48” Drive Spindle
3 7057920 2 ASSEMBLY, 48” L.H./R.H. Spindle
4 7072044 1 PIN, Chute Hinge
5 7014341 2 RING, Retaining
6 7035813 1 SPRING, Torsion (Side Chute)
7 7029425 1 CHUTE, Side Discharge
8 7076436 8 SPACER, Blade

9 7091628 8 WASHER, .64 x .99 x .05 Flat
10 7043858 8 BEARING, 1/2 x 3/4” Plastic Was 46278
11 7091503 5 HAIR PIN, 3/32 x 1.5”
12 7046302 4 WELDMENT, Anti-Scalp Wheel
13 7090993 4 SCREW, 1/2-20 x 4-1/2” Hex Head Cap, GR5
14 7090266 4 NUT, 1/2-20 Hex Center Lock, GR5 or B
15 7046301 4 SLEEVE, Wheel Caster
16 7073142 4 ROLLER, Low Density Polyethylene Was 79226
17 7024607 2 SWIVEL, Brake Link
18 7046790 2 ROD, Rear Lift- 48” Deck
19 7091587 3 WASHER, .531 x 1.062 x .121 Flat SAE
20 7091594 4 COTTER PIN, 1/2” Self Lock
21 7090122 6 WASHER, 3/8” Flat SAE
22 7091298 6 NUT, 5/16-18-3B Hex Nyloc
23 7013010 2 DECAL, Danger, Cut Finger
24 7024431 1 DECAL, 48” Deck
25 7046720 1 DECAL, Chute/Deflector
26 7013010 1 DECAL, CPSC Heavy Adhesive Was 26831
27 7091508 6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR5
28 7046491 1 PIN, 3/8 x 1-1/2” Clevis Was 91977
29 7046926 1 BELT, HA Sect. 50.65” (Electric Clutch)
30 7026827 1 SWIVEL, Lift, 1/2-13 thread
31 7028334 1 BELT, HA Sect., 94.50” effective length (TTK50 Traction Drive)
32 7046873 1 ROD, Front Lift- 48” Deck
33 7023478 1 SPACER
34 7091585 1 NUT, 3/8-16 Hex Center Lock, GR5 or B
35 7024180 1 SPACER, Tie Rod
36 7057923 1 ASSEMBLY, Deck Idler
37 7057950 1 ASSEMBLY, Drive Idler Arm

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

61

TP 400-5015-6-TC-N

48" CUTTING DECK ASSEMBLY (Series "H") PT.2

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

62

SERIES H & I

48" CUTTING DECK ASSEMBLY (Series "H") PT.2

p

y

Part No Descri

38 7012709 2 RING, 1” External Retaining
39 7023747 2 BUSHING, 1” Machine
40 7029272 1 SPRING, Extension- Primary Idler
41 7027471 1 PIN, Deck Hanger Improved
42 7091596 2 HAIRPIN, .148 x 2.62
43 7047086 1 COVER, L.H. Spindle
44 7047087 1 COVER, R.H. Spindle

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

63

TP 400-5015-6-TC-N

48" CUTTING DECK ASSEMBLY (Series "I") PT.1

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

64

SERIES H & I

48" CUTTING DECK ASSEMBLY (Series "I") PT.1

p

y

Part No Descri

1 7013864 4 LUBE FITTING, Straight (press-fit for .187 dia. Hole)

2 7090614 1 BOLT, 3/8-16 x 1-1/2” Hex Flange Lock, GR5

3 7029265 1 SHOULDER BOLT, 3/8-16 thread

4 7044799 1 WELDMENT, 48” Deck

5 7046860 2 BRACKET, Rear Lift- 48” Deck

6 7046864 1 BRACKET, Front Hanger- Right Hand

7 7046965 1 BRACKET, Front Hanger Left Hand

8 7046870 1 BRACKET, Front Hanger- 48” Deck

9 7071614 1 STIFFNER, 48” Deck- LT
10 7046947 2 WELDMENT, Idler Plate
11 7054142 1 ASSEMBLY, Front Lift Arm (Includes items 12 thru 16)
12 7046202 1 WELDMENT, Front Lift Arm
13 7035603 1 ARM, Lift
14 7012063 1 WASHER, Cone, 13/32 x 1-13/32” Diameter
15 7091302 1 NUT, 3/8-16 Hex Was 90130
16 7091790 1 BOLT, 3/8-16 x 1-1/4” Square Neck Carriage, GR5 Was 91716
17 7091601 33 NUT, 5/16-18 Hex Flange Lock, GR5
18 7091619 19 NUT, 3/8-16 Hex Flange Lock
19 7090799 9 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
20 7091547 18 BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR2 Was 90850
21 7091299 9 NUT, 3/8-16-3B Hex Nyloc
22 7091503 3 HAIR PIN, 3/32 x 1.5”
23 7091304 6 SCREW, 3/8-16 x 1” Hex Head Cap, GR5
24 7074951 1 BRACKET, Hinge (48” Deck) used on Series “I” Models
25 7044801 4 WELDMENT, Caster
26 7091169 4 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage, GR5
27 7090122 1 WASHER, 3/8” Flat SAE
28 7046491 1 PIN, 3/8 x 1-5/8” Clevis

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

65

TP 400-5015-6-TC-N

48" CUTTING DECK ASSEMBLY (Series "I") PT.2

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

66

SERIES H & I

48" CUTTING DECK ASSEMBLY (Series "I") PT.2

p

y

Part No Descri

17 7091601 5 NUT, 5/16-18 Hex Flange Lock, GR5
19 7090799 5 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
22 7091503 2 HAIR PIN, 3/32 x 1.5”
27 7090122 1 WASHER, 3/8” Flat SAE
29 7054376 3 ASSEMBLY, 48” Spindle
30 7072044 1 PIN, Chute Hinge
31 7014341 2 RING, Retaining
32 7035813 1 SPRING, Chute
33 7029425 1 CHUTE, Side Discharge
34 7076436 8 SPACER, Blade
35 7091628 8 WASHER, .64 x .99 x .05 Flat
36 7043858 8 BUSHING, Flange, .64 x .75 x .5
37 7046302 4 WELDMENT, Anti-Scalp Wheel
38 7090993 4 SCREW, 1/2-20 x 4-1/2” Hex Head Cap, GR5
39 7090266 4 NUT, 1/2-20 Hex Center Lock, GR5 or B
40 7046301 4 SLEEVE, Wheel Caster
41 7073142 4 ROLLER, Low Density Polyethylene Was 79226
42 7041874 2 SWIVEL, 3/8-16 thread, .109 Hole
43 7046790 2 ROD, Rear Lift- 48” Deck
44 7091587 3 WASHER, .531 x 1.062 x .121 Flat SAE
45 7091594 4 COTTER PIN, 1/2” Self Lock
46 7013010 2 DECAL, Danger, Cut Finger
47 7024431 1 DECAL, 48” Deck
48 7046720 1 DECAL, Chute/Deflector
49 7075121 1 BELT, HB Sect. 52.165” effective length- 48” Deck Drive used on electric clutch
50 7026827 1 SWIVEL, Lift, 1/2-13 thread
51 7028334 1 BELT, HA Sect., 94.50” effective length (TTK50 Traction Drive)
52 7046873 1 ROD, Front Lift- 48” Deck
53 7023478 1 SPACER
54 7091585 1 NUT, 3/8-16 Hex Center Lock, GR5 or B
55 7024180 1 SPACER, Tie Rod
56 7057923 1 ASSEMBLY, Deck Idler see 48” Deck Idler Page
57 7057950 1 ASSEMBLY, Drive Idler Arm see 48” Deck Idler Page
58 7012709 2 RING, 1” External Retaining
59 7023747 2 BUSHING, 1” Machine
60 7029272 1 SPRING, Extension- Primary Idler
61 7027471 1 PIN, Deck Hanger Improved

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

67

TP 400-5015-6-TC-N

48" CUTTING DECK ASSEMBLY (Series "I") PT.2

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

68

SERIES H & I

48" CUTTING DECK ASSEMBLY (Series "I") PT.2

p

y

Part No Descri

62 7091596 2 HAIR PIN, 3/32 x 1-1/2”
63 7044803 1 COVER, Spindle- Left Hand
64 7044804 1 COVER, Spindle- Right Hand

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

69

TP 400-5015-6-TC-N

48" DECK IDLER ASSEMBLIES

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

70

SERIES H & I

48" DECK IDLER ASSEMBLIES

p

y

Part No Descri

1 7018574 1 IDLER, 4.12 Flat

2 7023556 4 BUSHING, Caster

3 7024180 4 SPACER, Tie Rod

4 7046949 1 WELDMENT, Idler Arm

5 7076998 2 FITTING, Lube, 1/4-28 Straight

6 7090122 1 WASHER, 3/8” Flat SAE

7 7091302 1 NUT, 3/8-16 Hex , GR5 or B

8 7091585 2 NUT, 3/8-16 Hex Center Lock, GR5 or B

9 7091155 1 BOLT, 3/8-16 x 3” Square Neck Carriage, GR5
10 7046717 1 WELDMENT, Idler Arm- 48” Deck
11 7026310 1 IDLER, 3-1/4 O.D. x 1-3/4” Flat
12 7023478 1 SPACER
13 7029134 1 SPRING, Extension
14 7090122 1 WASHER, 3/8” Flat SAE
15 7090324 1 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
16 7091316 1 NUT, 1/2-13 Hex, GR B
17 7091322 1 WASHER, 1/2” Split Lock
18 7091821 1 SCREW, 1/2-13 x 3” Hex Head Cap

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

71

TP 400-5015-6-TC-N

48" DECK SPINDLE ASSEMBLY- Series "H"

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

72

SERIES H & I

48" DECK SPINDLE ASSEMBLY- Series "H"

p

y

Part No Descri

- 7054011 3 ASSEMBLY, Spindle (contains indented items below)
1 7029422 2 BALL BEARING, Sealed
2 7029272 1 SPRING, Extension- Primary Idler
3 7029274 1 SNAP-RING, Spindle Shaft
4 7059311 1 SHAFT, Spindle
5 7029254 1 SPACER, Bearing
6 7075771 1 BLADE, 16-1/2” Was 29247
7 7016440 1 WASHER, Belleville
8 7063236 1 BOLT, 5/8-18 x 6-5/8” Hex Head, GR5 Was 91980 (Now 63236 +

9 7076998 1 LUBE FITTING, 1/4-28 Thread Forming Was 29275

10 7058237 1 HOUSING, Cutter Was 29252
11 7029384 1 VENT, Spindle Alemite # 321839

12 7029302 6 BOLT, 3/8-16 x 1-1/4” Rib Necked
13A 7046917 1 PULLEY, Spindle (48” Deck L.H. & R. H.)
13B 7046794 1 PULLEY, Spindle (48” Deck Drive)

14 7063237 1 NUT, 5/8-18 Hex Flange Lock, GR5 Was 91736

15 7091299 6 NUT, 3/8-16-3B Hex Nyloc

16 7072077 1 CUP, Spindle Cover

17 7063238 1 SEAL, Nylos

tionItem Qt

Note

63237)

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

73

TP 400-5015-6-TC-N

48" DECK SPINDLE ASSEMBLY- Series "I"

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

74

SERIES H & I

48" DECK SPINDLE ASSEMBLY- Series "I"

p

y

Part No Descri

1 7012491 2 RING, 1-3/4” Retaining
2 7013313 2 BALL BEARING, 3/4” I.D.
3 7010817 1 LUBE FITTING, Straight (press-fit for .187 dia. Hole)
4 7073405 1 SHAFT, 48” Spindle (7.8” long)
5 7044798 1 WELDMENT, Spindle Housing
6 7014407 2 WASHER, Spindle
7 7016440 2 WASHER, Belleville
8 7090658 1 NUT, 5/8-18 Hex Jam

9 7017043 1 BLADE, 16-1/2” High Lift
10 7027168 6 SCREW, 5/16-18 x 1” Hex Head Cap, GR5 Was 90636
11 7091601 6 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070

12A 7073518 1 PULLEY, Deck/Drive- 48” (center spindle)
12B 7014544 2 PULLEY, 4-3/4” O.D. (outboard spindles)

13 7074467 3 NUT, 3/4-16 Hex Flange Jam, GR8

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

75

TP 400-5015-6-TC-N

DECALS PT. 1

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

76

SERIES H & I

DECALS PT. 1

p

y

Part No Descri

1 7072755 1 DECAL, Instructions Frame Top Electric Clutch

2 7046720 1 DECAL, Chute/Deflector

3 7073231 1 DECAL, Warning-Speed Setting 14, 16, & 18 HP ENGINES

4 7072749 1 DECAL, Roll Release

5 7044767 1 DECAL, Hydro Reservoir

6 7026415 1 DECAL, Caution-Battery Installation Fender

7 7026377 1 DECAL, Medallion Was 71544 (used on Series “H”

8 7072920 1 DECAL, Certification, B71.1-1998 used on Series “H” Models

9 7073335 1 DECAL, OPEI Ride-On
10 7074479 1 DECAL, No Mow in Reverse

tionItem Qt

Note

Models)

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

77

TP 400-5015-6-TC-N

DECALS PT. 2

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

78

SERIES H & I

DECALS PT. 2

p

y

Part No Descri

1 7073507 1 DECAL, Console- w/Headlights used on All Series “H” except

2 7073508 1 DECAL, Console- w/Indicator Lights used on LT180H48HBV2 and

3 7075447 1 DECAL, Console- Headlight/Choke- LT1642 used on LT160H42IBV

4 7028563 1 DECAL, Console Indicators

5 7073905 1 DECAL, Snapper- Hood- 3D, Silver Letters

6 7024910 1 DECAL - 42 Inch

7 7024431 1 DECAL, 48” Deck (not shown, similar to item 42”

8 7013010 1 DECAL, Danger, Cut Finger

9 7013010 1 DECAL, Danger, Cut Finger Was 26831 (not shown, same

10 7073424 1 DECAL, Shift Cover Hydro
11 7016134 1 TAG, Caution used on Series “H” Models only
12 7075631 1 DECAL, Service Parts, Tractor Domestic
13 7075594 1 DECAL, Engine, 16HP OHV B&S
14 7078022 1 DECAL, OPEI, Walk/Ride used on LT200H42IBV2
15 7029470 1 DECAL, Patent Numbers not shown

tionItem Qt

Note

LT180H48HBV2

most Series “I”

Decal)

as item 8 but with heavy
adhesive)

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

79

TP 400-5015-6-TC-N

ELECTRICAL COMPONENTS

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

80

SERIES H & I

ELECTRICAL COMPONENTS

p

y

Part No Descri

1A 7060618 1 * KIT, Battery (Series “H” & “I” LTs except for LT160H42HBV)

(not shown)
1B 7075912 1 BATTERY, 12v 195 cca, 7 plates/cell, wet replaces 19044
1C 7075913 1 BATTERY, 12v 300 cca, 9 plates/cell, wet replaces 74018

2 7076978 6 NUT, 1/4-20 Hex Nyloc
3 7017853 1 TRAY, Battery
4 7012485 1 RETAINER, 1/4” Bolt
5 7026414 1 WIRE, Ground, Black
6 7075622 1 SOLENOID- Super Trombetta- 2 Terminal
7 7091122 2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
8 7090977 2 NUT, 1/4-20 Hex Jam

9 7090053 2 WASHER, 1/4” Internal Tooth Lock Was 91314
10 7014476 1 WIRE, Positive (Red) (solenoid to battery)
11 7090072 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5 Was 27172
12 7012444 1 COVER, Battery Cable
13 7023187 1 LIGHT SWITCH, Rocker, SPST
14 7023355 1 SWITCH- DPDT
15 7026343 1 SWITCH, Ignition-Afterfire Solenoid
16 7028570 1 RELAY, Operator Presence Control, Electric Clutch
17 7090913 3 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
18 7028542 1 SWITCH, PTO Electric Clutch
19 7023354 1 SWITCH, Seat (NC)

tionItem Qt

Note

Footnotes:

Note* Includes Decal (Part No. 16134) & battery without acid.

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

81

TP 400-5015-6-TC-N

ELECTRICAL SCHEMATIC (All Series "I" except LT160H42IBV)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

82

SERIES H & I

ELECTRICAL SCHEMATIC (All Series "I" except LT160H42IBV)

p

y

Part No Descri

- 7072722 1 HARNESS, Main B&S 18 & 20HP V-Twin Electric Clutch used on All Series “I” except

tionItem Qt

Note

LT160H42IBV

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

83

TP 400-5015-6-TC-N

ELECTRICAL SCHEMATIC (LT160H42IBV)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

84

SERIES H & I

ELECTRICAL SCHEMATIC (LT160H42IBV)

p

y

Part No Descri

-- 7075432 1 HARNESS, Main B&S 16HP Single Electric Clutch used on LT160H42IBV

tionItem Qt

Note

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

85

TP 400-5015-6-TC-N

ELECTRICAL SCHEMATIC (LT160H42HBV & WLT160H42HBV)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

86

SERIES H & I

ELECTRICAL SCHEMATIC (LT160H42HBV & WLT160H42HBV)

p

y

Part No Descri

-- 7073418 1 HARNESS, Main B&S 16HP Single Electric Clutch used on LT160H42HBV &

tionItem Qt

Note

WLT160H42HBV

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

87

TP 400-5015-6-TC-N

ELECTRICAL SCHEMATIC (LT160H42HBV2, LT180H48HBV2)

Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
TP 400-5015-6-TC-N

88

SERIES H & I

ELECTRICAL SCHEMATIC (LT160H42HBV2, LT180H48HBV2)

p

y

Part No Descri

- 7073417 1 HARNESS, Main B&S 16 & 18HP V-Twin Electric Clutch used on LT160H42HBV2,

tionItem Qt

Note

LT180H48HBV2 &
WLT180H48HBV2

Footnotes:

Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH

SERIES H & I

89

TP 400-5015-6-TC-N

Parts Manual fo

r

LAWN TRACTORS ELECTRIC CLUTCH
HYDRO DRIVE
SERIES H & I

RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS

COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE

AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE

SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

McDonough, GA, 30253 U.S.A.

Manual No. 7006449

Revision 6,

2/20/2006

TP 400-5015-6-TC-N