Models: LT160H42DBV, LT160H42DBV2, LT180H48DBV2
Engine types:
LT160H42DBV: B. & S. 16.0 HP OHV, Model 28Q777 LT160H42DBV2: B. & S., 16.0 HP V-Twin, Model 303777 LT180H48DBV2: B. & S., 18.0 HP V-Twin, Model 350777
Electric Clutch
Hydro Drive system
Cutting Deck Widths:
42 inches: Models LT160H42DBV & LT160H42DBV2
48 inches: Model LT180H48DBV2
Transaxle Hydro Drive: Tuff-Torq Model K50 for LT160H42DBV & LT160H42DBV2; Tuff-Torq Model K55 for LT180H48DBV2
Front Tires:
LT160H42DBV & LT160H42DBV2: 15 x 6.00
LT180H48DBV2: 20 x 10-8
Rear Tires:
LT160H42DBV: 18 x 9.50 LT160H42DBV2 & LT180H48DBV2: 20 x 10.00-g.
Steering Type: Manual
Cutting Height Adjustment: Lever operated
Parking Brake: Lever activated
Electrical System: various switches, solenoids, and wires diagrams.
Parts List: A detailed part list for each component is provided
Q1: What engines are used in the Snapper Lawn Tractors Series D?
A1: The engines used are 16 0 HP OHV 28Q777 for LT160H42DBV, 16 0 HP V Twin 303777 for LT160H42DBV2 and 18 0 HP V Twin 35077 for LT180H48DBV2.
Q2: What is the cutting deck size for these models?
A2: LT160H42DBV and LT160H42DBV2 have a 42 inch wide cutting deck, but LT180H48DBV2 cutting deck size is of 48 inches.
Q3: What type of drive system do these lawn tractors use?
A3: Hydro Drive system is in use with the Snapper Lawn Tractors Series D.
Q4: Are there any replacement parts available for these models?
A4: Yes, replacement parts can be ordered from a parts list that can be found in the manual.
Q5: Describe how the cutting height is controlled on these lawn tractors?
A5: The cutting height is changed bir the use of aLever.
Q6: What kind of tires does the LT180H48DBV2 model have?
A6: The front tires of LT180H48DBV2 model are 15 x 6.00 while the rear tires are 20 x 10.00-g.
Q7: Is there a manual available that has the wiring diagram of the electrical components?
A7: Yes, the manual has all the electrical component wiring diagrams.