Specifications and Main Features
- Model :LT145H38CBV, LT160H42CBV and LT160H42CBV2
- Engine System:
LT145H38CBV – B. & S. 14.5 HP OHV / Model # 287707
LT160H42CBV – B. & S. 16.0 HP OHV / Model # 28Q777
LT160H42CBV2 – B. & S. 16.0 HP V-Twin / Model # 303777
- Hydro Drive Tuff-Torq Model K50 - the most similar transmission model
- 42’ and 38’ are the cutting deck size options, available.
- 6.00 by 15 in inches is the size of the front wheels.
- Rear Wheel Size LT145H38CBV: 18 x 8.50; LT160H42CBV: 18 x 9.50; LT160H42CBV2: 20 x 10.00
- Following Electrical Components are used:
Headlights
Battery Kit together with decal
- Not Available in the manual, weight carrying capacity is.
- Following Safety Features are included: Seat switch, brake switch
- This deck engagement is Switch controlled.
Frequently Asked Questions
Q: What is the type of engine used on the LT145H38CBV model?
A: LT145H38CBV model uses B. & S. 14.5 HP OHV engine, Model 287707.
Q: The available decks have what cutting width?
A: 2 available cutting deck sizes are 38” and 42”.
Q: What if I want to fit a different part for LT160H42CBV and LT160H42CBV2?
A: Some parts might have interchangeable parts but it is advisable to seek advice in the parts manual to get the correct part numbers.
A: The headlights are available for the tractor.
A: The tractors for the LT145H38CBV are 18 X 8.50 for each of the two rear wheels. The two front wheels must have a distinction which is 15 X 6.00.
A: It is possible to purchase genuine Snapper parts through the Snapper tractors approved dealerships or service locations.
A: The LT145H38CBV has a rating of 14.5 HP engine while LT160H42CBV and LT160H42CBV2 models have slightly powerful engines rated at 16.0 HP.
User Manual
Loading...