Snapper IMAGE 204094 Operating Manual

Wireless TV Speaker

Item No. 204094

OPERATING GUIDE

Thank you for purchasing the Sharper Image Wireless TV Speaker. Please read this operating guide carefully
before use and keep it for future reference. If you have any questions, please feel free to contact our Customer
Service department at 1 [phone].

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions carefully before using the Wireless TV Speaker.

• Always keep the system dry. Do not immerse
in water.

• For your safety, do not attempt to open the unit or
battery compartment. Attempting to open or opening
the battery compartment violates your warranty.

• The Wireless TV Speaker uses a lithium ion
battery. Please observe the safety and handling
instructions for the lithium ion battery. Please
dispose of the unit/used batteries properly,
following any local regulations.

• Do not dispose of the unit/used batteries in
the household trash. Do not incinerate. Take the
equipment to a nearby recycle center.

2 • Wireless TV Speaker

• Do not unplug by pulling on the cord. To unplug,
grasp the plug, not the cord. Unplug from outlet when
not in use and before servicing or cleaning.
Do not operate any device with a damaged cord
or plug, or after the device malfunctions, or is
dropped or damaged in any manner. Return the
device to the nearest authorized service facility
for examination, repair or electrical or mechanical
adjustment.

• This device is intended for home and personal
use only.

PACKAGE CONTENTS FEATURES IDENTIFICATION

OPERATING GUIDE

On/o & volume control

Receiver

1 Wireless Receiver

(Speaker)

1 Transmitter Base

Wireless TV Speaker

Item No. 204094

1 Operating Guide

1 AC Adapter

1 Audio Cord

2 RCA “Y-Adapter” Cables

(optional, for maximum

connection possibilities)

Low battery/
charging indicator

Power indicator

AC adapter jack Audio

Base

(back)

input port

Tone control

Headset port

Pairing button

(underneath)

Pairing button

(for additional
Receivers)

Wireless TV Speaker • 3

CONNECTION AND SET UP

Select an Audio Connection

Locate the audio out connector on the back
of your TV or the headphone jack.

Headphone Jack

You may also connect the Wireless TV Headphones
via your TV’s headphone jack. Use the provided audio
cable and connect the base of the Wireless TV Speaker
to your TV as shown below.

Analog Audio Output

For analog audio output, connectors use
the included audio cords.

4 • Wireless TV Speaker

PLEASE NOTE: In most cases, the TV speaker volume
will be muted when using this type of connection.