Page 1
Parts
p
0
Manual
Fast-Vac
Grass Collection Systems
Models:
5100857 3-Bag Dump From Seat
5600002 2-Bag Collection System (S150X - 48" Mower Deck)
5600003 3-Bag Collection System (S150X - 48" Mower Deck)
5600004 3-Bag Collection System (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600057 3-Bag Collection System (S200X - 61" Mower Deck)
5600148 3-Bag Collection System (S150X S/N: 2012628763 & Above - 52" Mower Deck)
Briggs and Stratton Yard Power Products Group
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
Descri
tion:
5101356
Revision
Rev. Date:
TP 400-7356-00-AT-SP
10/2007
0
Page 2
Page 3
Table Of Content
s
.
g
g
gg
.
g
MODEL COMPONENTS PAGE
Blower Group .....................................................................................................................................................................
Blower Mount & Drive Group .............................................................................................................................................
2-Bag Catcher & Cover Group ...........................................................................................................................................
3-Ba
Catcher & Cover Group ...........................................................................................................................................
3-Ba
Dump From Seat .....................................................................................................................................................
Weight Mount Group ..........................................................................................................................................................
Decals - Brand, Safety & Information .................................................................................................................................
Ba
er Mount Group .........................................................................................................................................................
Model Reference Sheet 1 - Models w/Rubber Dischar
Model Reference Sheet 2 - Models w/Rubber Discharge chute ........................................................................................
e chute ........................................................................................
Torque Specification Chart ............................................................................................. Inside Back Cover
10
12
14
16
18
20
21
4
6
8
Page 4
Blower Group
)
)
)
)
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600057 (S200X - 61" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600002 (S150X - 48" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
4
TP 400-7356-00-AT-SP
Page 5
Blower Group
)
)
)
)
)
PART NO. DESCRIPTIONREF NO QTY.
1 5403723A 1 BLOWER HOUSING
2 5403750A 1 BACK PLATE
3 5403754A 1 BLOWER IMPELLER
4 7100021 2 BEARING, FLANGE, 1" Bore
5 7091541 5 BOLT, 5/16-18 X 3/4" Self Tap
6 5403736A 1 BELT GUARD
7 5021097 1 PULLEY, IDLER V-NOTCH, 5"
8 3043613 2 IDLER PULLEY ASSEMBLY
9 5403749A 2 BELT KEEPER
10 5403740A 1 KEEPER, BELT TENSIONER
11 5025156 2 WASHER 3/8" SAE
12 5025013X16 2 BOLT, 3/8-16 X 2
13 5025017X18 1 BOLT, 1/2-13 X 2-1/4
14 5025056 1 NUT, 1/2-13 Hex Nylon Lock
15 5025394 4 NUT, 3/8-16 Hex Large Serrated Flange
16 5025011X10 1 BOLT, 5/16-18 X 1-1/4
17 5022308 3 U-CLIP, 5/16-18
18 7091811 6 BOLT, 5/16-18 X 5/8" Self Lock
19 5025145X6 6 CARRIAGE BOLT, 5/16-18 X 3/4
20 5025392 6 NUT, 5/16-18 Hex Nylock Flange
21 7010776 1 RETAINING RING, 1/2"
22 7014409 2 FLANGE BEARING, 9/16"
23 7044995 1 IDLER STUD
24 7091804 2 FLAT WASHER, 9/16" Narrow
25 5403746 1 IDLER ARM
26 5025171 1 WASHER, 3/8 Lock
27 5025035 1 NUT, 3/8-24 Hex
28 5020807 1 SPRING, Extension
29 7091575 1 NUT, 5/16-18 Hex Center Lock
30 5025013X48 1 BOLT, 3/8-16 X 6" GD5
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600057 (S200X - 61" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600002 (S150X - 48" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
5
TP 400-7356-00-AT-SP
Page 6
Blower Mount & Drive Group
)
)
)
)
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600003 (S150X - 48" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600002 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
6
TP 400-7356-00-AT-SP
Page 7
Blower Mount & Drive Group
)
)
)
)
)
PART NO. DESCRIPTIONREF NO QTY.
1 - - BLOWER ASSEMBLY
2 5402380A 1 WELD, BLOWER MOUNT 61 BLACK (All Models - 61" Mower Deck)
3 5100847 2 SNAPPERPIN, 5/16 X 2
4 7091811 6 BOLT, 5/16-18 X 3/4" SELF LOCK
5 5025013X8 3 BOLT, 3/8-16 X 1" GD5 YZ
6 5025096 3 NUT, 3/8-16 HEX NYLON LOCK
7 5022205 1 EYEBOLT, 1/4-20 X 2
8 5025391 1 NUT, 1/4-20 HEX NYLOCK FLANGE
9 5046807 1 PULLEY, BLOWER AXLE, 52 (All Models - 52" Mower Deck)
10 5022726 1 KEY 1/4 SQ X 1 1/2 LONG
11 5022308 2 BODY CLIP, 5/16-18 X 1/2" DEEP
12 5061858A 1 GUARD, DECK - BLACK (All Models - 48" & 52" Mower Decks)
13 5400007A 1 SHIELD, BELT (All Models - 48" & 52" Mower Decks)
14 5022319 2 KNOB, PLASTIC, 5/16-18 X 3/4"
15 5023177 1 PULLEY, BLOWER 52" DECK (All Models - 52" Mower Deck)
16 5021006 1 BELT, #7-6717, 88.8" E.L. (All Models - 52" Mower Deck)
17 5403650A 1 WELD, BLOWER MOUNT 52 BLACK (S/N: 2012628763 & Above Models - 52"
Mower Deck)
18 5402633A 1 WELD, BLOWER MOUNT 48 BLACK (All Models - 48" Mower Deck)
19 5402354A 1 WELD, BLOWER MOUNT 52 BLACK (S/N: 2012628762 & Below Models - 52"
Mower Deck)
20 5022844 1 BELT, #7-6718, 92.0" E.L. (All Models - 48" & 61" Mower Decks)
21 5046806 1 PULLEY, BLOWER AXLE, 48 (All Models - 48" Mower Deck)
22 5046808 1 PULLEY, BLOWER AXLE, 61 (All Models - 61" Mower Deck)
23 5023176 1 PULLEY, BLOWER 48" DECK (All Models - 48" Mower Deck)
24 5046702 1 PULLEY, BLOWER 61" DECK (All Models - 61" Mower Deck)
25 5401436A 1 SHIELD, BELT (All Models - 61" Mower Deck)
26 5061858A 1 GUARD, DECK - BLACK (All Models - 61" Mower Deck)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600003 (S150X - 48" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600002 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
7
TP 400-7356-00-AT-SP
Page 8
2-Bag Catcher & Cover Group
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
8
TP 400-7356-00-AT-SP
Page 9
2-Bag Catcher & Cover Group
)
PART NO. DESCRIPTIONREF NO QTY.
1 5100153 1 2 BAG AIR DOME
2 5100150 2 CATCHER BAG W/ HANDLE
3 5100152 2 GAS CYLINDER
4 5100151 1 DETENT PIN W/ LANYARD
5 5025011X6 12 BOLT, 5/16-18 X 3/4" GRD5
6 5025155 8 WASHER, 5/16" SAE
7 5025170 4 WASHER, 5/16" LOCK
8 5025056 3 NUT, 1/2-13 HEX NYLON LOCK
9 5025018X24 3 BOLT, 1/2-20 X 3" GD5
10 5025158 2 WASHER, 1/2" SAE
11 5025057 2 NUT 5/16-18 HEX NYLON LOCK
12 5025392 4 NUT 5/16-18 HEX NYLOCK FLANGE
13 5022875 1 HOSE CLAMP
14 5022833 1 HOSE
15 5022876 1 HOSE CLAMP
16 5400147A 1 WELD, INLET BLOWER
17 5100036A 1 BAFFLE
18 5100730 2 BAG FRAME CONNECTOR, PLASTIC
19 5100729 2 BAG FRAME
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
9
TP 400-7356-00-AT-SP
Page 10
3-Bag Catcher & Cover Group
)
)
)
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
10
TP 400-7356-00-AT-SP
Page 11
3-Bag Catcher & Cover Group
)
)
)
)
PART NO. DESCRIPTIONREF NO QTY.
1 5100154 1 3 BAG AIR DOME
2 5100150 3 CATCHER BAG W/ HANDLE
3 5100152 2 GAS CYLINDER
4 5100151 1 DETENT PIN W/ LANYARD
5 5025011X6 14 BOLT, 5/16-18 X 3/4" GRD5
6 5025155 10 WASHER, 5/16" SAE
7 5025170 6 WASHER, 5/16" LOCK
8 5025056 4 NUT, 1/2-13 HEX NYLON LOCK
9 5025018X24 4 BOLT, 1/2-20 X 3" GD5
10 5025158 2 WASHER, 1/2" SAE
11 5025057 4 NUT, 5/16-18 HEX NYLON LOCK
12 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE
13 5022875 1 CLAMP, HOSE, UPPER
14 5022833 1 HOSE, FLEXIBLE, 7" DIA. X 58
15 5022876 1 CLAMP, HOSE, LOWER
16 5400145A 1 WELD, INLET BLOWER 3-BAG BLACK
17 5400197A 1 BAFFLE
18 5100730 1 BAG FRAME CONNECTOR, PLASTIC
19 5100729 1 BAG FRAME
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
11
TP 400-7356-00-AT-SP
Page 12
3-Bag Dump From Seat
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5100857
© Copyright Briggs and Stratton. All Rights Reserved.
2007
12
TP 400-7356-00-AT-SP
Page 13
3-Bag Dump From Seat
PART NO. DESCRIPTIONREF NO QTY.
1 5100857X1 MASTER LINK, LH
2 5100857X2 MASTER LINK, RH
4 5100857X4 DRIVE LINK
5 5100857X5 SLAVE LINK
7 5100857X7 TORQUE LINK ASSEMBLY
9 5100857X9 HANDLE PIVOT
10 5100857X10 LATCH ASSEMBLY, LH
11 5100857X11 LATCH ASSEMBLY, RH
12 5100857X12 TENSION SPRING
13 5100857X13 GAS SPRING
14 5100857X14 CABLE ADJUST. BLOCK
26 5100857X26 DFS WELD LEVER
29 5100857X29 RUBBER STOPPER
32 5100857X32 RUBBER GRIP
33 5100857X33 RUBBER GRIP
34 5100857X34 1/16 CABLE
37 5100857X37 1/16 CABLE TIE
41 5100857X41 FLANGE BUSHING
43 5100857X43 SHOULDER BOLT
Footnotes
The above parts group applies to the following Mfg. Nos.:
5100857
© Copyright Briggs and Stratton. All Rights Reserved.
2007
13
TP 400-7356-00-AT-SP
Page 14
Weight Mount Group
)
)
)
)
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600057 (S200X - 61" Mower Deck
5600002 (S150X - 48" Mower Deck
5600003 (S150X - 48" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
14
TP 400-7356-00-AT-SP
Page 15
Weight Mount Group
)
)
)
)
)
PART NO. DESCRIPTIONREF NO QTY.
1 5025018X10 2 BOLT, 1/2-20 X 1-1/4" GD5 YZ
2 5025158 2 WASHER, 1/2 SAE
3 5049082A 1 HOLDER ASMY - WEIGHT
4 5025098 2 NUT, 1/2-20 HEX NYLON LOCK
5 5049143 1 ROD- .500DIA 13.75LG YELLOW
6 5025210 2 PIN, HAIR
7 1717627 3 WEIGHT, 50LBS
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600057 (S200X - 61" Mower Deck
5600002 (S150X - 48" Mower Deck
5600003 (S150X - 48" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
15
TP 400-7356-00-AT-SP
Page 16
Decals - Brand, Safety & Information
)
)
)
)
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600002 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
16
TP 400-7356-00-AT-SP
Page 17
Decals - Brand, Safety & Information
)
)
)
)
)
PART NO. DESCRIPTIONREF NO QTY.
1 5046944 1 DECAL, Fast-Vac
2 5046850 1 DECAL, Danger/Warning
3 5046851 1 DECAL, Warning-Blower
4 5046883 1 DECAL, Warning-Shield
5 7027733 1 DECAL, Ear Protection
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600002 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
17
TP 400-7356-00-AT-SP
Page 18
Bagger Mount Group
)
)
)
)
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
18
TP 400-7356-00-AT-SP
Page 19
Bagger Mount Group
)
)
)
)
)
PART NO. DESCRIPTIONREF NO QTY.
1 5400043A 2 WELD, MOUNT, POST
2 5025394 14 NUT, 3/8-16 HEX NYLOCK FLANGE
3 5025013X8 10 BOLT, 3/8-16 X 1" GD5 YZ
4 5100013 2 PIN, HITCH, .50 X 3.25 W/ LAY
5 5400041A 2 MOUNT, TAB, BLACK
6 5400149A 1 WELD, BAGGER MOUNT
7 5025013X10 4 BOLT, 3/8-16 X 1-1/4" GD5 YZ
8 5025156 6 WASHER 3/8" SAE
9 5022848 2 CAP, PLASTIC, 1-1/2" X 1-1/2"
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck
5600057 (S200X - 61" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
2007
19
TP 400-7356-00-AT-SP
Page 20
Model Reference Sheet 1 - Models w/Rubber Discharge chute
)
)
)
)
)
356ESRF0
The above parts group applies to the following Mfg. Nos.:
5600057 (S200X - 61" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600002 (S150X - 48" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
20
TP 400-7356-00-AT-SP
Page 21
Model Reference Sheet 2 - Models w/Rubber Discharge chute
)
)
)
)
)
356ESRF1
The above parts group applies to the following Mfg. Nos.:
5600057 (S200X - 61" Mower Deck
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck
5600003 (S150X - 48" Mower Deck
5600002 (S150X - 48" Mower Deck
© Copyright Briggs and Stratton. All Rights Reserved.
#Name
21
TP 400-7356-00-AT-SP
Page 22
Page 23
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
20
27
31
66
76
2.1
2.3
3.1
3.5
7.6 8 10.9 12 16.3
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420 571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
Page 24
Parts
Manual
Fast-Vac
Grass Collection Systems
IT IS THE POLICY OF FERRIS INDUSTRIES TO IMPROVE ITS PRODUCTS WHENEVER IT
IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE
CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED
Briggs and Stratton Yard Power Products Group
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
www.ferrisindustries.com
© Copyright Briggs and Stratton Corporation
All Rights Reserved. Printed In USA.
2007
Loading...